Constructing homo- and hetero-metallic molecular topologies using pyridylcarboxylates as spacers: preparation of a half-ring complex with active coordination sites

Addition of isonicotinic acid NC(5)H(4)CO(2)H (or isonicH) to [Pt(dppf)(MeCN)(2)](2+)2OTf(-)(dppf = 1,1'-bis(diphenylphosphino)ferrocene, OTf = triflate) affords a mixture of the homometallic molecular square [Pt(4)(dppf)(4)(mu-O(2)CC(5)H(4)N)(4)](4+)4OTf(-), 1 and its precursor intermediate [Pt(dppf)(eta(1)-NC(5)H(4)CO(2)H)(2)](2+)2OTf(-), 2. The latter captures [Pd(dppf)(MeCN)(2)](2+)2OTf(-) to give a heterometallic square, [Pt(2)Pd(2)(dppf)(4)(mu-O(2)CC(5)H(4)N)(4)](4+)4OTf(-), 3. Slight skeletal modification of the ligand leads to different assemblies. This is illustrated by the addition of NC(5)H(4)CH(2)CO(2)H.HCl to [Pt(dppf)(MeCN)(2)](2+)2OTf(-) to give [PtCl(dppf)(NC(5)H(4)CH(2)CO(2)H)](+)OTf(-), 4, which reacts with another equivalent of AgOTf to yield the dibridged complex [Pt(2)(dppf)(2)(mu-NC(5)H(4)CH(2)CO(2))(2)](2+)2OTf(-), 5. All complexes, with the exception of , have been structurally characterized by single-crystal X-ray crystallography. Complexes 2 and 4 are potential precursors to further molecular topologies.     

Ruthenium/TFA-catalyzed coupling of activated secondary propargylic alcohols with cyclic 1,3-diones: furan versus pyran ring formation

A catalytic system consisting of the 16-electron allyl-ruthenium(II) complex [Ru(eta(3)-2-C3H4Me)(CO)(dppf)][SbF6] (dppf = 1,1'-bis(diphenylphosphino)ferrocene) and trifluoroacetic acid (TFA) has been used to promote the coupling between secondary propargylic alcohols and cyclic 1,3-diketones. The nature of the resulting products was found to be dependent on the ring size of the dicarbonyl compound employed. Thus, whereas 6,7-dihydro-5H-benzofuran-4-ones have been selectively obtained starting from 1,3-cyclohexanediones, via furan-ring formation, the use of 1,3-cyclopentanedione leads instead to 6,7-dihydro-4H-cyclopenta[b]pyran-5-ones via a pyran-ring formation process.     

Acceptor (CF3)PCPH pincer reactivity with (PPh3)3Ir(CO)H

The syntheses of Ir(I) and Ir(III) complexes incorporating the electron-withdrawing pincer ligand (1,3-C(6)H(4)(CH(2)P(CF(3))(2))(2)) ((CF(3))PCPH) with (PPh(3))(3)Ir(CO)H and subsequent chemistry are reported. Under ambient conditions, reaction of 1 equiv. (CF(3))PCPH with (PPh(3))(3)Ir(CO)H gave the mono-bridged complex [Ir(CO)(PPh(3))(2)(H)](2)(μ-(CF(3))PCPH) (1). Reaction of (PPh(3))(3)Ir(CO)H with excess (CF(3))PCPH and MeI gave the doubly-bridged complex [Ir(CO)(PPh(3))(H)](2)(μ-(CF(3))PCPH)(2) (2), whereas the tetrameric oligomer [Ir(CO)(PPh(3))(H)](4)(μ-(CF(3))PCPH)(4) (2-sq) was obtained from a 1:1 ligand:metal mixture in benzene in the presence of excess MeI. At higher temperatures (165 °C) the reaction of (CF(3))PCPH with (PPh(3))(3)Ir(CO)H afforded the 5-coordinate Ir(I) complex ((CF(3))PCP)Ir(CO)(PPh(3)) (3). Complex 3 shows mild catalytic activity for the decarbonylation of 2-naphthaldehyde in refluxing diglyme (162 °C).     

Synthesis and platinum coordination chemistry of the perfluoroalkyl acceptor pincer ligand, 1,3-(CH(2)P(CF(3))(2))(2)C(6)H(4)

The synthesis of perfluoroalkyl-substituted "pincer"-type PCP ligands, 1,3-C6H4(CH2P(Rf)2)2 (Rf = CF3, C2F5), and platinum coordination studies (Rf = CF3) are reported. 1,3-C6H4(CH2P(CF3)2)2 (CF3PCPH) reacts at ambient temperatures with (cod)Pt(Me)Cl (cod = 1,5-cyclooctadiene) and (cod)PtMe2 to afford unmetalated PCPH-bridged products [(CF3PCPH)Pt(Me)Cl]x and cis-[(CF3PCPH)PtMe2]2, respectively. cis-[(CF3PCPH)PtMe2]2 is soluble and has been spectroscopically and crystallographically characterized. Thermolysis of these compounds results in the loss of methane and the formation of metalated complexes (CF3PCP)PtCl and (CF3PCP)PtMe. Treatment of (CF3PCP)PtCl with MeMgBr provides an alternative route to (CF3PCP)PtMe. The carbonyl cation (CF3PCP)Pt(CO)+SbF6- (nu(CO) = 2143 cm(-1)) was readily prepared by chloride abstraction with AgSbF6 under 1 atm CO. nu(CO) data indicates that RfPCP ligands are electronically analogous to trans acceptor phosphine complexes such as trans-((C2F5)2PMe)2Pt(Me)(CO)+ (nu(CO) = 2149 cm-1).     

Multiple silicon-hydrogen bond activations at adjacent rhodium and iridium centers

The reaction of 1 equiv of primary silanes, SiH(3)R (R = Ph, Mes), with [RhIr(CO)(3)(dppm)(2)] yields mono(silylene)-bridged complexes of the type [RhIr(H)(2)(CO)(2)(μ-SiHR)(dppm)(2)] (R = Ph or Mes), while for R = Ph the addition of 2 equiv yields the bis(silylene)-bridged complexes, [RhIr(CO)(2)(μ-SiHPh)(2)(dppm)(2)]. The kinetic isomer of this bis(silylene)-bridged product has the phenyl substituent axial on one silylene unit and equatorial on the other, and in the presence of excess silane this rearranges to the thermodynamically preferred "axial-axial" isomer, in which the phenyl substituents on each bridging silylene unit are axial and parallel to one another. The reaction of 1 equiv of diphenylsilane with [RhIr(CO)(3)(dppm)(2)] produces the mono(silylene)-bridged product, [RhIr(H)(2)(CO)(2)(μ-SiPh(2))(dppm)(2)], and the subsequent addition of silane in the presence of CO yields the silyl/silylene product [RhIr(H)(SiPh(2)H)(CO)(3)(κ(1)-dppm)(μ-SiPh(2))(dppm)]. The reaction of [RhIr(CO)(3)(dppm)(2)] with 2 equiv of SiH(2)Me(2) yields the analogous product [RhIr(H)(SiMe(2)H)(CO)(3)(κ(1)-dppm)(μ-SiMe(2))(dppm)]. Low-temperature NMR spectroscopic observation of some key intermediates, such as [RhIr(H)(SiH(2)Ph)(CO)(2)(μ-CO)(dppm)(2)], formed during the formation of the mono(silylene)-bridged species provides evidence for a mechanism involving initial Si-H bond activation at Rh, followed by the subsequent Si-H bond activation at Ir. The Si-H bond activation of a second equivalent of silane seems to be initiated by dissociation of the Rh-bound end of one diphosphine. The reaction of diphenylsilane with the cationic complex [RhIr(CH(3))(CO)(2)(dppm)(2)][CF(3)SO(3)] gives rise to a different reactivity pattern in which Si-H bond activation is initiated at Ir. In this case, the cationic silyl-bridged species, [RhIr(CH(3))(CO)(2)(κ(1):η(2)-SiHPh(2))(dppm)(2)][CF(3)SO(3)], contains an agostic Si-H interaction with Rh. In solution, at ambient temperature, this complex converts to two species, [RhIr(H)(COCH(3))(CO)(μ-H)(μ-SiPh(2))(dppm)(2)][CF(3)SO(3)] and [RhIr(CO)(2)(μ-H)(μ-SiPh(2))(dppm)(2)] [CF(3)SO(3)], formed by the competing methyl migration to CO and reductive elimination of methane, respectively. In the diphenylsilylene dihydride product, a weak interaction between the bridging silicon and the terminal Ir-bound hydride is proposed on the basis of NMR evidence.     

Syntheses and crystal structures of dinuclear complexes containing d-block and f-block luminophores. Sensitization of NIR luminescence from Yb(III), Nd(III), and Er(III) centers by energy transfer from Re(I)- and Pt(II)-bipyrimidine metal centers

Mononuclear complexes [Re(bpym)(CO)(3)Cl] and [Pt(bpym)(CC-C(6)H(4)CF(3))(2)] (bpym = 2,2'-bipyrimidine), in which one of the bipyrimidine sites is vacant, have been used as "complex ligands" to prepare heterodinuclear d-f complexes in which a lanthanide tris(1,3-diketonate) unit is attached to the secondary bipyrimidine site to evaluate the ability of d-block chromophores to act as antennae for causing sensitized near-infrared (NIR) luminescence from adjacent lanthanide(III) centers. The two sets of complexes so prepared are [Re(CO)(3)Cl(mu-bpym)Ln(fod)(3)] (abbreviated as Re-Ln; where Ln = Yb, Nd, Er) and [(F(3)C-C(6)H(4)-CC)(2)Pt(mu-bpym)Ln(hfac)(3)] (abbreviated as Pt-Ln; where Ln = Nd, Gd). Members of both series have been structurally characterized; the metal-metal separation across the bipyrimidine bridge is approximately 6.3 A in each case. In these complexes, the (3)MLCT (MLCT = metal to ligand charge-transfer) luminescences of the mononuclear [Re(bpym)(CO)(3)Cl] and [Pt(bpym)(CC-C(6)H(4)CF(3))(2)] complexes are quenched by energy transfer to those lanthanides (Ln = Yb, Nd, Er) that have low-lying f-f states capable of NIR luminescence; as a result, sensitized NIR luminescence is seen from the lanthanide center following excitation of the d-block unit. In the solid state, quenching of the luminescence from the d-block chromophore is complete, indicating efficient d --> f energy transfer, as a result of the short metal-metal separation across the bipyrimidine bridge. In a CH(2)Cl(2) solution, partial dissociation of the dinuclear complexes into the mononuclear units occurs, with the result that some (3)MLCT luminescence is observed from mononuclear [Re(bpym)(CO)(3)Cl] or [Pt(bpym)(CC-C(6)H(4)CF(3))(2)] present in the equilibrium mixture. Solution UV-vis and luminescence titrations, carried out by the addition of portions of Ln(fod)(3)(H(2)O)(2) or Ln(hfac)(3)(H(2)O)(2) to the d-block complex ligands, indicate that binding of the lanthanide tris(1,3-diketonate) unit at the secondary bipyrimidine site to give the d-f dinuclear complexes occurs with an association constant of ca. 10(5) M(-)(1).     

Vinyl and carbene ruthenium(II) complexes from hydridoruthenium(II) precursors

The reactions of the hydrido compounds [RuHCl(CO)(L)2][L = PiPr3 (1), PCy3 (2)] with HC(triple bond)CR (R = H, Ph, tBu) afforded by insertion of the alkyne into the Ru-H bond the corresponding vinyl complexes [RuCl(CHCHR)(CO)(L)2], 3-8, which upon protonation with HBF4 gave the cationic five-coordinated ruthenium carbenes [RuCl(CHCH2R)(CO)(L)2]BF4, 9-14. Subsequent reactions of the carbene complexes with PR3(R = Me, iPr) and CH3CN led either to deprotonation and re-generation of the vinyl compounds or to cleavage of the ruthenium-carbene bond and the formation of the six-coordinated complexes [RuCl(CO)(CH3CN)2(PiPr3)2]BF4, 17, and [RuH(CO)(CH3CN)2(PiPr3)2]X, 18a,b. The acetato derivative [RuH(2-O2CCH3)(CO)(PCy3)2], 19, also reacted with acetylene and phenylacetylene by insertion to yield the related vinyl complexes [Ru(CHCHR)(kappa2-O2CCH3)(CO)(PCy3)2], 20, 21, of which that with R = H was protonated with HBF4 to yield the corresponding cationic ruthenium carbene 22. With [RuHCl(H2)(PCy3)2], 25, as the starting material, the five-coordinated chloro(hydrido)ruthenium(II) compounds [RuHCl(PCy3)(dppf)], 26(dppf = [Fe(eta5-C5H4PPh2)2]), [RuHCl[Sb(CH2Ph)3](PCy3)2], 27, and [RuHCl(CH3CN)(PCy3)2], 30, were prepared. The reactions of 27 with HCCR (R = H, Ph) gave the hydrido(vinylidene) complexes [RuHCl(CCHR)(PCy3)2], 28 and 29, whereas treatment of 30 with HC(triple bond)CPh afforded the vinyl compound [RuCl(CHCHPh)(CH3CN)(PCy3)2], 31. The molecular structures of 11(R = tBu, L = PiPr3) and 26 were determined crystallographically.     

Expeditious entry to novel 2-methylene-2,3-dihydrofuro[3,2-c] chromen-2-ones from 6-chloro-4-hydroxychromen-2-one and propargylic alcohols

A catalytic system consisting of the ruthenium(II) complex [Ru(η3-2-C3H4Me)(CO)(dppf)][SbF6] (dppf=1,1'-bis(diphenylphosphino)ferrocene) and trifluoroacetic acid has been used to promote the coupling of secondary propargylic alcohols with 6-chloro-4-hydroxychromen-2-one. The reactions afforded unusual 2-methylene-2,3-dihydrofuro[3,2-c]chromen-2-ones in good yields.     

Platinum(II) complexes bearing 1,1'-bis(diphenylphosphino)ferrocene as building blocks for functionalized redox active porphyrins

Reactions of the cationic complex ions [PtMe(Me2SO)(PP)]+ (PP = dppf (1,1'-bis(diphenylphosphino)ferrocene) and dppe (1,2-bis(diphenylphosphino)ethane)) with 5,10,15,20-tetrakis(4-pyridyl)-21H,23H-porphyrin (TpyP) led to the formation of the symmetrical tetraplatinated porphyrin complexes, [PtMe(PP)]4TpyP.X4 (PP = dppf, X = CF3SO3-, 3, and PP = dppe, X = BF4-, 5) containing the organometallic fragment [PtMe(PP)]. The precursor sulfoxide platinum complexes [PtMe(Me2SO)(dppf)]CF3SO3, 2 and [PtMe(Me2SO)(dppe)]BF4, 4, were prepared by halide abstraction from [PtMeCl(dppf)], 1, and by controlled protonolysis of [PtMe2(dppe)] respectively, in the presence of a small amount of dimethyl sulfoxide. All these starting platinum(II) compounds, as well as the porphyrin derivatives 3 and 5, were fully characterized through elemental analysis, 1H NMR mono- and bidimensional, 31P[1H], 31P-1H HMBC, UV/Vis absorption and photophysical measurements. The X-ray crystal structure of complex 1 has been determined. In order to ascertain the electronic influence of ferrocene, the spectroscopic and redox properties of 3 were compared with those of TPyP and of the analogous 5. Cyclic voltammetry (CV), differential pulse voltammetry (DPV), 1H and 31P NMR data, and UV/Vis data, all suggest a certain degree of communication between the central porphyrin and the peripheral hetero-bimetallic fragments. In contrast, no detectable interaction among these peripheral groups seem to come into play. Unlikely from the porphyrin derivative 5, formation of well defined fluorescent mesoscopic ring structures was easily achieved by simple evaporation from diluted dichloromethane solutions of 3.     

Novel ruthenium-based metathesis catalysts containing electron-withdrawing ligands: synthesis, immobilization, and reactivity

The syntheses and reactivity of seven different ruthenium-based metathesis catalysts are described. Ru(CF3COO)2(PCy3)(=CH-2-(2-PrO)C6H4) (1), Ru(CF3COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (2), and Ru(CF3COO)2(PCy(3))(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5) (3) were prepared via chlorine exchange by reacting RuCl2(PCy3)2(=CH-2-(2-PrO)C6H4), RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4), and RuCl2(PCy3)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5), respectively, with silver trifluoroacetate (Cy =cyclohexyl). In analogy, Ru(CF3CF2COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (4) and Ru(CF3CF2CF2COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (5) were prepared from RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) via reaction with CF3CF2COOAg and CF3CF2CF2COOAg, respectively. Ru(C6F5COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (6) and Ru(C6F5O)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (7) were prepared from RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) via reaction with C6F5COOTl and C6F5OTl, respectively. Supported catalysts Ru(PS-DVB-CH2OOCCF2CF2CF2COO)(CF3COO)(PCy3)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5) (8), Ru(PS-DVB-CH2OOCCF2CF2CF2COO)(CF3COO)(PCy3)(=CH-2-(2-PrO)C6H4) (9), and Ru(PS-DVB-CH2OOCCF2CF2CF2COO)(CF3COO)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (10) were synthesized by reaction of RuCl2(PCy3)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5), RuCl2(PCy3)(=CH-2-(2-PrO)C6H4), and RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4), respectively, with a perfluoroglutaric acid-derivatized poly(styrene-co-divinylbenzene) (PS-DVB) support (silver form). Halogen exchange in PCy3-containing systems had to be carried out in dichloromethane in order to suppress precipitation of AgCl.PCy3. The reactivity of all new catalysts in ring-closing metathesis (RCM) of hindered electron-rich and -poor substrates, respectively, at elevated temperature (45 degrees C) was compared with that of existing systems. Diethyl diallylmalonate (DEDAM, 11), diethyl allyl(2-methylallyl)malonate (12), N,N-diallyl-p-toluenesulfonamide (13), N-benzyl-N-but-1-en-4-ylbut-2-enecarboxylic amide (14), and N-allyl-N-(1-carboxymethyl)but-3-en-1-yl-p-toluenesulfonamide (15) were used as educts. Supported catalysts were prepared with high loadings (2.4, 22.1, and 160 mg of catalyst/g PS-DVB for 8, 9, and 10, respectively). Catalyst 8 showed higher and catalysts 9 and 10 sowed significantly reduced activities in RCM compared to their homogeneous analogues. Thus, with 8, turnover numbers (TONs) up to 4200 were realized in stirred-batch (carousel) RCM experiments. To elucidate the nature of the bound species, catalysts 8-10 were subjected to 13C- and 31P-MAS NMR spectroscopy. These investigations provided evidence for the proposed structures. Leaching of ruthenium into the reaction mixture was low, resulting in ruthenium contents <85 ppb (ng/g) in the final RCM-derived products.     

Reactions of halofluorocarbons with group 6 complexes M(C(5)H(5))(2)L (M = Mo, W; L = C(2)H(4), CO). Fluoroalkylation at molybdenum and tungsten, and at cyclopentadienyl or ethylene ligands.

The molybdenum(II) and tungsten(II) complexes [MCp(2)L] (Cp = eta(5)-cyclopentadienyl; L = C(2)H(4), CO) react with perfluoroalkyl iodides to give a variety of products. The Mo(II) complex [MoCp(2)(C(2)H(4))] reacts with perfluoro-n-butyl iodide or perfluorobenzyl iodide with loss of ethylene to give the first examples of fluoroalkyl complexes of Mo(IV), MoCp(2)(CF(2)CF(2)CF(2)CF(3))I (8) and MoCp(2)(CF(2)C(6)F(5))I (9), one of which (8) has been crystallographically characterized. In contrast, the CO analogue [MoCp(2)(CO)] reacts with perfluorobenzyl iodide without loss of CO to give the crystallographically characterized salt, [MoCp(2)(CF(2)C(6)F(5))(CO)](+)I(-) (10), and the W(II) ethylene precursor [WCp(2)(C(2)H(4))] reacts with perfluorobenzyl iodide without loss of ethylene to afford the salt [WCp(2)(CF(2)C(6)F(5))(C(2)H(4))](+)I(-) (11). These observations demonstrate that the metal-carbon bond is formed first. In further contrast the tungsten precursor [WCp(2)(C(2)H(4))] reacts with perfluoro-n-butyl iodide, perfluoro-iso-propyl iodide, and pentafluorophenyl iodide to give fluoroalkyl- and fluorophenyl-substituted cyclopentadienyl complexes WCp(eta(5)-C(5)H(4)R(F))(H)I (12, R(F) = CF(2)CF(2)CF(2)CF(3); 15, R(F) = CF(CF(3))(2); 16, R(F) = C(6)F(5)); the Mo analogue MoCp(eta(5)-C(5)H(4)R(F))(H)I (14, R(F) = CF(CF(3))(2)) is obtained in similar fashion. The tungsten(IV) hydrido compounds react with iodoform to afford the corresponding diiodides WCp(eta(5)-C(5)H(4)R(F))I(2) (13, R(F) = CF(2)CF(2)CF(2)CF(3); 18, R(F) = CF(CF(3))(2); 19, R(F) = C(6)F(5)), two of which (13 and 19) have been crystallographically characterized. The carbonyl precursors [MCp(2)(CO)] each react with perfluoro-iso-propyl iodide without loss of CO, to afford the exo-fluoroalkylated cyclopentadiene M(II) complexes MCp(eta(4)-C(5)H(5)R(F))(CO)I (21, M = Mo; 22, M = W); the exo-stereochemistry for the fluoroalkyl group is confirmed by an X-ray structural study of 22. The ethylene analogues [MCp(2)(C(2)H(4))] react with perfluoro-tert-butyl iodide to yield the products MCp(2)[(CH(2)CH(2)C(CF(3))(3)]I (25, M = Mo; 26, M = W) resulting from fluoroalkylation at the ethylene ligand. Attempts to provide positive evidence for fluoroalkyl radicals as intermediates in reactions of primary and benzylic substrates were unsuccessful, but trapping experiments with CH(3)OD (to give R(F)D, not R(F)H) indicate that fluoroalkyl anions are the intermediates responsible for ring and ethylene fluoroalkylation in the reactions of secondary and tertiary fluoroalkyl substrates.     

Heterolytic activation of hydrogen as a trigger for iridium complex promoted activation of carbon-fluorine bonds

The cationic iridium(III) complex [IrCF(3)(CO)(dppe)(DIB)][BARF](2) where DIB = o-diiodobenzene, dppe = 1,2-bis(diphenylphosphino)ethane, and BARF = B(3,5-(CF(3))(2)C(6)H(3))(4)(-) undergoes reaction in the presence of dihydrogen to form [IrH(2)(CO)(2)(dppe)](+) as the major product. Through labeling studies and (1)H and (31)P[(1)H] NMR spectroscopies including parahydrogen measurements, it is shown that the reaction involves conversion of the coordinated CF(3) ligand into carbonyl. In this reaction sequence, the initial step is the heterolytic activation of dihydrogen, leading to proton generation which promotes alpha-C-F bond cleavage. Polarization occurs in the final [IrH(2)(CO)(2)(dppe)](+) product by the reaction of H(2) with the Ir(I) species [Ir(CO)(2)(dppe)](+) that is generated in the course of the CF(3) --> CO conversion.     

Unusual coordination assemblies from platinum(II) thienyl and bithienyl complexes

Dinuclear Pt(2)Br(2)(dppf)(2)(mu-C(8)H(4)S(2)) exchanges with isonicotinic acid to release free bithiophene and gives a molecular square [Pt(4)(dppf)(4)(mu(2)-O(2)CC(5)H(4)N)(4)](4+)4OTf(-) which is an "all-ring" system with four Pt rings disposed at the corners of a larger macrocyclic ring. The related mononuclear complex PtBr(eta(1)(C2)-C(4)H(3)S)(dppf) reacts with AgOTf (OTf = triflate) to give [Pt(2)(dppf)(2)(mu(2),eta(1)(C),eta(1)(S)-C(4)H(3)S)(2)](2+)2OTf(-) with an unusual six-membered ring formed by the fusion of two Pt-thienyl entities at the sulfur sites. All the complexes are structurally characterized by single-crystal X-ray crystallography.     

Germyl- and germylene-bridged complexes of Rh/Ir and subsequent chemistry of a bridging germylene group

A series of neutral and cationic germylene-bridged complexes and a neutral germyl(germylene) complex have been synthesized and characterized by NMR spectroscopy and X-ray crystallography. Reaction of 1 equiv of primary germanes, RGeH(3) (R = Ph, (t)Bu), with [RhIr(CO)(3)(dppm)(2)] (1) at low-temperature yields [RhIr(GeH(2)R)(H)(CO)(3)(dppm)(2)] (R = Ph (3) or (t)Bu (4)), the products of single Ge-H bond activation, which upon warming transform to the germylene-bridged dihydrides, [RhIr(H)(2)(CO)(2)(μ-GeHR)(dppm)(2)] (R = Ph (5) or (t)Bu (6)) by activation of a second Ge-H bond accompanied by CO loss. Both classes of compounds have the diphosphines folded back in a "cradle-shaped" geometry. Although compound 5 reacts with additional phenylgermane at -40 °C to give a germylene-bridged/germyl product, [RhIr(GeH(2)Ph)(H)(2)(CO)(2)(κ(1)-dppm)(μ-GeHPh)(μ-H)(dppm)] (7), warming results in decomposition. However, reaction of 5 with 1 equiv of diphenylgermane at ambient temperature results in a novel mixed bis(μ-germylene) complex, [RhIr(CO)(2)(μ-GeHPh)(μ-GePh(2))(dppm)(2)] (8), containing both mono- and disubstituted germylene fragments. Reaction of 1 equiv of diphenylgermane with complex 1 produces a similar monogermylene-bridged product, [RhIr(H)(2)(CO)(2)(μ-GePh(2))(dppm)(2)] (9), while reaction of 1 with 2 equiv of diphenylgermane yields the germyl/germylene product [RhIr(H)(GeHPh(2))(CO)(3)(κ(1)-dppm)(μ-GePh(2))(dppm)] (10). The above reactions, incorporating first one and then a second equivalent of primary and secondary germanes, were studied by low-temperature multinuclear NMR spectroscopy, revealing details about the stepwise activations of multiple Ge-H bonds. Reaction of diphenylgermane with the cationic complex [RhIr(CH(3))(CO)(2)(dppm)(2)][CF(3)SO(3)] (2) leads to a cationic A-frame-type germylene- and hydride-bridged product, [RhIr(CO)(2)(μ-H)(μ-GePh(2))(dppm)(2)][CF(3)SO(3)] (3), which reversibly activates H(2), yielding a germyl-bridged dihydride and reacts stoichiometrically with water, methanol, and HCl to yield the respective germanol, germamethoxy, and germylchloride products.     

Ru(3)(CO)(12) in Acidic Media. Intermediates of the Acid-Cocatalyzed Water-Gas Shift Reaction (WGSR)

The elucidation of the WGSR promoted by ruthenium carbonyls in acidic media started with the detection of the Ru(0), Ru(I), and Ru(II) intermediate complexes, namely Ru(3)(CO)(12), Ru(2)[&mgr;-eta(2)-OC(CF(3))O](2)(CO)(6), and fac-[Ru(CF(3)COO)(3)(CO)(3)](-), which accumulate when CF(3)COOH is employed as an acid cocatalyst. Under catalytic conditions, the three were found to interconvert through elementary steps which produce CO(2) and H(2). In fact, Ru(0) is oxidized by H(+) to Ru(I) and half the hydrogen of the catalytic cycle is supplied by this reaction. On the other hand, Ru(I) disproportionates to Ru(0) and Ru(II), and this latter species undergoes nucleophilic attack by H(2)O. The decomposition of the metallacarboxylic acid intermediate gives back Ru(I), while H(2) and CO(2) are produced in a 1/2 molar ratio. The two alternating pathways for dihydrogen formation, namely Ru(0) oxidation by H(+) and the decomposition of a metallacarboxylic acid intermediate, involve H(2) reductive elimination from the same RuHCF(3)COO(CO)(2)L(2) intermediate (L = H(2)O, ethers). These findings define an acid-cocatalyzed WGSR whose distinctive features are (i) the intervention of a disproportionation reaction to generate a Ru(II) electron poor complex, whose CO ligands can undergo nucleophilic attack by water, (ii) the generation of the hydrido intermediate for dihydrogen production through two distinct reaction patways, and (iii) the reductive elimination of H(2) from the hydrido intermediate without involving H(+) from the medium.     

Novel carbohydrate-appended metal complexes for potential use in molecular imaging

Seven discrete sugar-pendant diamines were complexed to the {M(CO)(3)}(+) ((99m)Tc/Re) core: 1,3-diamino-2-propyl beta-D-glucopyranoside (L(1)), 1,3-diamino-2-propyl beta-D-xylopyranoside (L(2)), 1,3-diamino-2-propyl alpha-D-mannopyranoside (L(3)), 1,3-diamino-2-propyl alpha-D-galactopyranoside (L(4)), 1,3-diamino-2-propyl beta-D-galactopyranoside (L(5)), 1,3-diamino-2-propyl beta-(alpha-D-glucopyranosyl-(1,4)-D-glucopyranoside) (L(6)), and bis(aminomethyl)bis[(beta-D-glucopyranosyloxy)methyl]methane (L(7)). The Re complexes [Re(L(1)-L(7))(Br)(CO)(3)] were characterized by (1)H and (13)C 1D/2D NMR spectroscopy which confirmed the pendant nature of the carbohydrate moieties in solution. Additional characterization was provided by IR spectroscopy, elemental analysis, and mass spectrometry. Two analogues, [Re(L(2))(CO)(3)Br] and [Re(L(3))(CO)(3)Br], were characterized in the solid state by X-ray crystallography and represent the first reported structures of Re organometallic carbohydrate compounds. Conductivity measurements in H(2)O established that the complexes exist as [Re(L(1)-L(7))(H(2)O)(CO)(3)]Br in aqueous conditions. Radiolabelling of L(1)-L(7) with [(99m)Tc(H(2)O)(3)(CO)(3)](+) afforded in high yield compounds of identical character to the Re analogues. The radiolabelled compounds were determined to exhibit high in vitro stability towards ligand exchange in the presence of an excess of either cysteine or histidine over a 24 h period.     

Organometallic chemistry of fluorinated allenes

Reaction of 1,1-difluoroallene and tetrafluoroallene with a series of transition metal complex fragments yields the mononuclear allene complexes [CpMn(CO)(2)(allene)] (1), [(CO)(4)Fe(allene)] (2), [(Ph(3)P)(2)Pt(C(3)H(2)F(2))] (4), [Ir(PPh(3))(2)(C(3)H(2)F(2))(2)Cl] (5), and the dinuclear complexes [mu-eta(1)-eta(3)-C(3)H(2)F(2))Fe(2)(CO)(7)] (3), [Ir(PPh(3))(C(3)H(2)F(2))(2)Cl](2) (6), and [mu-eta(2)-eta(2)-C(3)H(2)F(2))(CpMo(CO)(2))(2)] (9), respectively. In attempts to synthesize cationic complexes of fluorinated allenes [CpFe(CO)(2)(C(CF(3))=CH(2))] (7a), [CpFe(CO)(2)(C(CF(3))=CF(2))] (7b) and [mu-I-(CpFe(CO)(2))(2)][B(C(6)H(3)-3,5-(CF(3))(2))(4)] were isolated. The spectroscopic and structural data of these complexes revealed that the 1,1-difluoroallene ligand is coordinated exclusively with the double bond containing the hydrogen-substituted carbon atom. 1,1-Difluoroallene and tetrafluoroallene proved to be powerful pi acceptor ligands.     

The bridged binding mode as a new, versatile template for the selective activation of carbon-fluorine bonds in fluoroolefins: activation of trifluoroethylene

We report the selective activation of carbon-fluorine bonds in trifluoroethylene using the diiridium complex [Ir(2)(CH(3))(CO)(2)(dppm)(2)][OTf] (1). Coordination of trifluoroethylene in a bridging position between the two metals in 1 results in facile fluoride ion loss in three different ways. Attack by strong fluorophiles such as Me(3)SiOTf and HOTf results in F(-) removal from one of the geminal fluorines to give the cis-difluorovinyl-bridged product [Ir(2)(CH(3))(OTf)(CO)(2)(μ-κ(1):η(2)-C(F)═CFH)(dppm)(2)][OTf]. A second activation can also be accomplished by addition of excess Me(3)SiOTf to give the fluorovinylidene-bridged product [Ir(2)(CH(3))(OTf)(CO)(2)(μ-C(2)FH)(dppm)(2)][OTf](2). Interestingly, activation of the trifluoroethylene-bridged precursor by water also occurs, yielding [Ir(2)(CH(3))(CO)(2)(κ(1)-C(H)═CF(2))(μ-OH)(dppm)(2)][OTf], in which the lone vicinal fluorine is removed, leaving a geminal arrangement of fluorines in the product. A [1,2]-fluoride shift can also be induced in the trifluoroethylene-bridged precursor upon the addition of CO to give the 2,2,2-trifluoroethylidene-bridged product [Ir(2)(CH(3))(CO)(3)(μ-C(H)CF(3))(dppm)(2)][CF(3)SO(3)]. Addition of hydrogen to the cis-difluorovinyl-bridged product results in the quantitative elimination of cis-difluoroethylene, while its reaction with CO yields a mixture of cis-difluoropropene and 2,3-difluoropropene by reductive elimination of the methyl and difluorovinyl groups with an accompanying isomerization in the case of the second product. Finally, protonation of the 2,2,2-trifluoroethylidene-bridged product liberates 1,1,1-trifluoroethane, in which one hydrogen (H(+)) is from the acid while the other hydrogen (H(-)) is derived from activation of the methyl group.     

Self-assembly organometallic squares with terpyridyl metal complexes as bridging ligands

A series of novel heterometallic square complexes with the general molecular formulas [fac-Br(CO)(3)Re[mu-(pyterpy)(2)M]](4)(PF(6))(8) and [(dppf)Pd[mu-(pyterpy)(2)Ru]](4)(PF(6))(8)(OTf(8) (4), where M = Fe (1), Ru (2), or Os (3), pyterpy is 4'-(4' "-pyridyl)-2,2':6',2' '-terpyridine, dppf = 1,1'-bis(diphenylphosphino)ferrocene and OTf is trifluoromethanesulfonate, were prepared by self-assembly between BrRe(CO)(5) or (dppf)Pd(H(2)O)(2)(OTf)(2) and (pyterpy)(2)M(PF(6))(2). The obtained NMR spectra, IR spectra, electrospray ionization mass spectra, and elemental analyses are all consistent with the proposed square structures incorporating terpyridyl metal complexes as bridging ligands. Multiple redox processes were observed in all square complexes. All four complexes display strong visible absorptions in the region 400-600 nm, which are assigned as metal (Fe, Ru, or Os)-to-ligand (pyterpy) charge transfer (MLCT) bands. Square 3 exhibits an additional weak band at 676 nm, which is assigned to an Os-based (3)MLCT band. For each complex, the bands centered between 279 and 377 nm are assigned as pyterpy-based pi-pi bands and the Re-based MLCT band. Square 3 is luminescent in room-temperature solution, while squares 1, 2, and 4 do not have any detectable luminescence under identical experimental conditions.     

Synthesis and structures of cis- and trans-bis(alkyneselenolato)platinum(II) complexes

The reaction of 2 equiv of LiSeCC-n-C(5)H(11) (1) with cis-PtCl(2)(Ph(3)P)(2) (2) gives a mixture of the cis and trans isomers of Pt(Ph(3)P)(2)(SeCC-n-C(5)H(11))(2) (3), which slowly isomerizes in CH(2)Cl(2) to the preferred trans form trans-3. The closely related cis-[Pt(dppf)(2)(SeCC-n-C(5)H(11))(2)] (4) (dppf = bis(diphenylphosphino)ferrocene) was prepared by a similar metathetical reaction using the platinum chloride complex of the chelating dppf to impose the cis geometry. The structures of the cis and trans complexes have been investigated in solution by heteronuclear NMR ((31)P, (77)Se, and (195)Pt) and, in the cases of trans-3 and 4, characterized in the solid state by single-crystal X-ray diffraction. Changing the coordination geometry from cis to trans induces significant changes in the structural and spectroscopic parameters, which do not comply with the previously anticipated donor-acceptor properties of selenolate ligands.