A 3D canted antiferromagnetic porous metal-organic framework with anatase topology through assembly of an analogue of polyoxometalate

The unique porous metal-organic framework {KCo3(C6H4O7)(C6H5O7)(H2O)2.8H2O}8 (1), which exhibits an unprecedented infinite 3D (3,6)-connected decorated anatase net, has been obtained by hydrothermal reaction. Upon dehydration, the compound retains crystallinity and exhibits a type I N2 sorption isotherm, characteristic of a microporous solid with apparent Langmuir surface area 939 m2/g and pore volume 0.31 cm3/g. Magnetic measurements for both 1 and dehydrated 1 show the spin-canted antiferromagnetic state below 5 K and a magnetic hysteresis loop at 2 K. Thus, dehydrated 1 represents the first metal-organic framework for which microporosity and a spin-canted antiferromagnetic state coexist, which demonstrates that the self-assembly of organo-polymetal clusters and metal ions can provide a potential route to magnetic porous metal-organic frameworks.     

A lanthanide-based metal-organic framework with a dynamic porous property

Hydrothermal reaction of La(NO(3))(3), NaHCO(3) and H(3)L (H(3)L = pyrazole-3,5-dicarboxylic acid) gives a 3D metal-organic framework with a dynamic porous property.     

A non-interpenetrated porous metal-organic framework with high gas-uptake capacity

A novel microporous polyhedral framework [Zn(6)(btb)(4)(4,4'-bipy)(3)(dmf)(55)(H(2)O)(32)] with high surface area has been designed and synthesized, which shows high multigas-uptake capacity via supercritical carbon dioxide (SCD) activation.     

A Zn4O-containing doubly interpenetrated porous metal-organic framework for photocatalytic decomposition of methyl orange

A doubly interpenetrated semiconducting MOF Zn(4)O(2,6-NDC)(3)(DMF)(1.5)(H(2)O)(0.5)·4DMF·7.5H(2)O (UTSA-38) of a cubic net has been constructed, which exhibits photocatalytic activity for the degradation of methyl orange in aqueous solution.     

Expanded sodalite-type metal-organic frameworks: increased stability and H(2) adsorption through ligand-directed catenation

The torsion between the central benzene ring and the outer aromatic rings in 1,3,5-tri-p-(tetrazol-5-yl)phenylbenzene (H3TPB-3tz) and the absence of such strain in 2,4,6-tri-p-(tetrazol-5-yl)phenyl-s-triazine (H3TPT-3tz) are shown to allow the selective synthesis of noncatenated and catenated versions of expanded sodalite-type metal-organic frameworks. The reaction of H3TPB-3tz with CuCl2.2H2O affords the noncatenated compound Cu3[(Cu4Cl)3(TPB-3tz)8]2.11CuCl2.8H2O.120DMF (2), while the reaction of H3TPT-3tz with MnCl2.4H2O or CuCl2.2H2O generates the catenated compounds Mn3[(Mn4Cl)3(TPT-3tz)8]2.25H2O.15CH3OH.95DMF (3) and Cu3[(Cu4Cl)3(TPT-3tz)8]2.xsolvent (4). Significantly, catenation helps to stabilize the framework toward collapse upon desolvation, leading to an increase in the surface area from 1120 to 1580 m2/g and an increase in the hydrogen storage capacity from 2.8 to 3.7 excess wt % at 77 K for 2 and 3, respectively. The total hydrogen uptake in desolvated 3 reaches 4.5 wt % and 37 g/L at 80 bar and 77 K, demonstrating that control of catenation can be an important factor in the generation of hydrogen storage materials.     

Experimental study of dimethyl methylphosphonate decomposition over anatase TiO2

Removal from air and decomposition of dimethyl methylphosphonate (DMMP) over high surface area anatase TiO(2) at ambient temperature have been quantitatively studied by employing Fourier transform infrared (FTIR) technique under static conditions. In the first scenario of air purification, DMMP underwent reactive adsorption that upon completion was followed by photocatalytic oxidation. DMMP was captured over the TiO(2) surface at the speed of external diffusion. Hydrolysis of adsorbed DMMP led to methanol and methyl methylphosphonate (MMP). At low DMMP coverage quantity, it hydrolyzed completely with the formation of completely surface-bound methanol at 1% relative humidity (RH) and mostly gaseous methanol at 50% RH. Photocatalytic oxidation generated CO(2) as the only carbonaceous gaseous product and bidentate formates as the intermediate surface product. At high DMMP coverage quantity, it was captured incompletely and hydrolyzed partially with CH(3)OH in the gas phase only, 50% RH enhancing both processes. Photocatalytic oxidation generated gaseous HCOOH, CO, and CO(2) and was incomplete due to catalyst deactivation by nonvolatile products. In the second scenario of air purification, DMMP underwent adsorption, hydrolysis, and photooxidation at the same time. It resulted in the quickest removal of DMMP from the gas phase and completion of oxidation in 30 min, suggesting this process for practical air decontamination. At least 0.8 nm(2) of TiO(2) surface per each DMMP molecule should be available for complete purification of air.     

3D porous metal-organic framework exhibiting selective adsorption of water over organic solvents

A 3D porous metal-organic framework (MOF) with 1D open channels has been constructed hydrothermally using Zn(II) and a rigid planar ligand IDC(3)- (imidazole-4,5-dicarboxylate). This MOF can adsorb water selectively over organic solvents and can be regenerated and reused. It also represents a rare example of a MOF with open channels that form/collapse reversibly upon hydration/dehydration.     

A composite metal-organic framework material with high selective adsorption for dibenzothiophene

A composite metal-organic framework material Ag⁺/MOF-101 was synthesized and applied to adsorb dibenzothiophene (DBT) from model oils. The loading of Ag⁺ enhanced the deep adsorptive desulfurization capacity for DBT and significantly weaken the adsorption competitiveness of toluene.     

一个微孔钴基金属有机骨架的合成及其选择性气体吸附

利用硝酸钴与配体5，5''-di (1H-1，2，4-triazol-1-yl)-(1，1''-biphenyl)-2，2''-dicarboxylic acid (H₂DTBDA)进行溶剂热反应，制备了一个结构新颖的金属有机骨架{[Co (DTBDA)]₂·DMF·MeOH}_n (FJI-H37)。FJI-H37不仅具有适合气体分子吸附的0.69 nm的微孔，还具有良好的热稳定性及有机溶剂容忍性。气体吸附测试表明FJI-H37不仅能从C₂H₂/CO₂(体积比50∶50)混合气中选择性吸附C₂H₂，还可以从CO₂/N₂(体积比15∶85)和CO₂/CH₄(体积比50∶50)混合气中选择性捕获CO₂；固定床突破实验进一步证实了其高效的气体分离能力。     

一个微孔钴基金属有机骨架的合成及其选择性气体吸附

利用硝酸钴与配体5,5''-di(1H-1,2,4-triazol-1-yl)-(1,1''-biphenyl)-2,2''-dicarboxylic acid (H₂DTBDA)进行溶剂热反应,制备了一个结构新颖的金属有机骨架{[Co(DTBDA)]₂·DMF·MeOH}_n (FJI-H37)。FJI-H37不仅具有适合气体分子吸附的0.69 nm的微孔,还具有良好的热稳定性及有机溶剂容忍性。气体吸附测试表明FJI-H37不仅能从C₂H₂/CO₂(体积比50:50)混合气中选择性吸附C₂H₂,还可以从CO₂/N₂(体积比15:85)和CO₂/CH₄(体积比50:50)混合气中选择性捕获CO₂;固定床突破实验进一步证实了其高效的气体分离能力。     

一个微孔钴基金属有机骨架的合成及其选择性气体吸附

利用硝酸钴与配体5，5''-di (1H-1，2，4-triazol-1-yl)-(1，1''-biphenyl)-2，2''-dicarboxylic acid (H₂DTBDA)进行溶剂热反应，制备了一个结构新颖的金属有机骨架{[Co (DTBDA)]₂·DMF·MeOH}_n (FJI-H37)。FJI-H37不仅具有适合气体分子吸附的0.69 nm的微孔，还具有良好的热稳定性及有机溶剂容忍性。气体吸附测试表明FJI-H37不仅能从C₂H₂/CO₂(体积比50∶50)混合气中选择性吸附C₂H₂，还可以从CO₂/N₂(体积比15∶85)和CO₂/CH₄(体积比50∶50)混合气中选择性捕获CO₂；固定床突破实验进一步证实了其高效的气体分离能力。     

Hydrogen adsorption in a highly stable porous rare-earth metal-organic framework: sorption properties and neutron diffraction studies

A highly stable porous lanthanide metal-organic framework, Y(BTC)(H2O).4.3H2O (BTC = 1,3,5-benzenetricarboxylate), with pore size of 5.8 A has been constructed and investigated for hydrogen storage. Gas sorption measurements show that this porous MOF exhibits highly selective sorption behaviors of hydrogen over nitrogen gas molecules and can take up hydrogen of about 2.1 wt % at 77 K and 10 bar. Difference Fourier analysis of neutron powder diffraction data revealed four distinct D2 sites that are progressively filled within the nanoporous framework. Interestingly, the strongest adsorption sites identified are associated with the aromatic organic linkers rather than the open metal sites, as occurred in previously reported MOFs. Our results provide for the first time direct structural evidence demonstrating that optimal pore size (around 6 A, twice the kinetic diameter of hydrogen) strengthens the interactions between H2 molecules and pore walls and increases the heat of adsorption, which thus allows for enhancing hydrogen adsorption from the interaction between hydrogen molecules with the pore walls rather than with the normally stronger adsorption sites (the open metal sites) within the framework. At high concentration H2 loadings (5.5 H2 molecules (3.7 wt %) per Y(BTC) formula), H2 molecules form highly symmetric novel nanoclusters with relatively short H2-H2 distances compared to solid H2. These observations are important and hold the key to optimizing this new class of rare metal-organic framework (RMOF) materials for practical hydrogen storage applications.     

A metal-organic framework with entatic metal centers exhibiting high gas adsorption affinity

A metal-organic framework, PCN-9, containing entatic metal centers, has been synthesized and crystallographically characterized. The H2 and CH4 adsorption enthalpies of PCN-9 are among the highest reported thus far.     

Interactions and binding energies of dimethyl methylphosphonate and dimethyl chlorophosphate with amorphous silica

The fundamental interactions of dimethyl methylphosphonate (DMMP) and dimethyl chlorophosphate (DMCP) on amorphous silica nanoparticles have been investigated with transmission infrared spectroscopy and temperature-programmed desorption (TPD). DMMP and DMCP both adsorb molecularly to silica through the formation of hydrogen bonds between isolated silanols and the phosphoryl oxygen of the adsorbate. The magnitude of the shift of the ν(OH) mode upon simulant adsorption is correlated to the adsorption strength. The activation energies for desorption for a single DMMP or DMCP molecule from amorphous silica varied with coverage. In the limit of zero coverage, after the effects of defects were excluded, the activation energies were 54.5 ± 0.3 and 48.4 ± 1.0 kJ/mol for DMMP and DMCP, respectively.     

A homochiral porous metal-organic framework for highly enantioselective heterogeneous asymmetric catalysis

A homochiral porous noninterpenetrating metal-organic framework (MOF), 1, was constructed by linking infinite 1D [Cd(mu-Cl)2]n zigzag chains with axially chiral bipyridine bridging ligands containing orthogonal secondary functional groups. The secondary chiral dihydroxy groups accessible via the large open channels in 1 were utilized to generate a heterogeneous asymmetric catalyst for the addition of diethyzinc to aromatic aldehydes to afford chiral secondary alcohols at up to 93% enantiomeric excess (ee). Control experiments with dendritic aromatic aldehydes of different sizes indicate that the heterogeneous asymmetric catalyst derived from 1 is both highly active and enantioselective as a result of the creation of readily accessible, uniform active catalyst sites inside the porous MOF.     

Surface modification of polyoxometalate host-guest supramolecular architectures: from metal-organic pseudorotaxane framework to molecular box

Precise controlling of the pH value leads to the formation of a new type of metal-organic pseudorotaxane framework and supramolecular box within accommodating POMs guests.     

Gas adsorption and storage in metal-organic framework MOF-177

Gas adsorption experiments have been carried out on a zinc benzenetribenzoate metal-organic framework material, MOF-177. Hydrogen adsorption on MOF-177 at 298 K and 10 MPa gives an adsorption capacity of approximately 0.62 wt %, which is among the highest hydrogen storage capacities reported in porous materials at ambient temperatures. The heats of adsorption for H2 on MOF-177 were -11.3 to -5.8 kJ/mol. By adding a H2 dissociating catalyst and using our bridge building technique to build carbon bridges for hydrogen spillover, the hydrogen adsorption capacity in MOF-177 was enhanced by a factor of approximately 2.5, to 1.5 wt % at 298 K and 10 MPa, and the adsorption was reversible. N2 and O2 adsorption measurements showed that O2 was adsorbed more favorably than N2 on MOF-177 with a selectivity of approximately 1.8 at 1 atm and 298 K, which makes MOF-177 a promising candidate for air separation. The isotherm was linear for O2 while being concave for N2. Water vapor adsorption studies indicated that MOF-177 adsorbed up to approximately 10 wt % H2O at 298 K. The framework structure of MOF-177 was not stable upon H2O adsorption, which decomposed after exposure to ambient air in 3 days. All the results suggested that MOF-177 could be a potentially promising material for gas separation and storage applications at ambient temperature (under dry conditions or with predrying).     

Flexible 3D porous metal-organic framework exhibiting selective adsorption for H2O over organic solvents

A new flexible 3D porous metal-organic framework (MOF) with 1D open nanotube,[Co2(μ5-CTAI)(dpe)(H2O)2]n·6n(H2O)(1) (CTA=cyclohexane-1,2,4,5-tetracarboxylic acid,dpe=1,2-di(4-pyridyl) ethylene) has been prepared and structurally characterized.Meanwhile,each 1D nanotubes filled with 1D water chain with dimension of 13.711 × 12.275 2.Compound 1 represents a new example that collapse/deform upon dehydration/hydration and shows adsorb H 2 O selectively over organic solvents.