水下任意刚性散射体对Bessel波的散射特性分析

本文利用Bessel波的谐波展开式, 采用T矩阵方法的推导思路, 建立了水下任意刚性散射体在Bessel波照射下的声散射场计算公式. 以水下刚性椭球体和两端附连半球的刚性圆柱体为例, 计算了在不同波锥角β 下的反向散射形态函数, 同时, 依据镜反射波和绕行波的干涉物理模型, 给出了预报Bessel波照射下的反向散射形态函数峰峰间隔值的计算模型. 仿真结果表明本文提出的Bessel波照射下反向散射形态函数峰峰间隔值预报方法是准确有效的, 同时也说明, 本文建立的基于T矩阵法计算水下任意刚性散射体在Bessel波束下的声散射场方法是有效的, 这拓展了T矩阵法的应用领域.     

Scattering of a Bessel beam by a sphere

The exact scattering by a sphere centered on a Bessel beam is expressed as a partial wave series involving the scattering angle relative to the beam axis and the conical angle of the wave vector components of the Bessel beam. The sphere is assumed to have isotropic material properties so that the nth partial wave amplitude for plane wave scattering is proportional to a known partial-wave coefficient. The scattered partial waves in the Bessel beam case are also proportional to the same partial-wave coefficient but now the weighting factor depends on the properties of the Bessel beam. When the wavenumber-radius product ka is large, for rigid or soft spheres the scattering is peaked in the backward and forward directions along the beam axis as well as in the direction of the conical angle. These properties are geometrically explained and some symmetry properties are noted. The formulation is also suitable for elastic and fluid spheres. A partial wave expansion of the Bessel beam is noted.     

非偏振贝塞尔高斯光束的球散射

无衍射光束球散射性质的研究目前一般采用贝塞尔光束,但是贝塞尔光束在物理上是不可实现的。贝塞尔高斯光束作为近似无衍射光束,是亥姆霍兹方程在傍轴条件下的解,并且可以用激光振荡器直接产生,但其光束宽是有限的。应用傅里叶变换,平面波谱展开和球面矢量波函数展开法,推导了非偏振贝塞尔高斯光束的球散射远场的无量纲散射函数。通过数值模拟,对非偏振的贝塞尔高斯光束与贝塞尔光束,高斯光束的球散射远场进行了比较,比较发现:当球散射体偏离光轴时,非偏振贝塞尔高斯光束跟贝塞尔光束散射远场的差异主要是散射强度的差异,但是散射极点所在的方向基本保持不变;贝塞尔高斯光束和贝塞尔光束的散射在光束圆锥角方向上比较显著,但高斯光束的前向散射比较显著。     

Axial radiation force of a bessel beam on a sphere and direction reversal of the force

An expression is derived for the radiation force on a sphere placed on the axis of an ideal acoustic Bessel beam propagating in an inviscid fluid. The expression uses the partial-wave coefficients found in the analysis of the scattering when the sphere is placed in a plane wave traveling in the same external fluid. The Bessel beam is characterized by the cone angle beta of its plane wave components where beta=0 gives the limiting case of an ordinary plane wave. Examples are found for fluid spheres where the radiation force reverses in direction so the force is opposite the direction of the beam propagation. Negative axial forces are found to be correlated with conditions giving reduced backscattering by the beam. This condition may also be helpful in the design of acoustic tweezers for biophysical applications. Other potential applications include the manipulation of objects in microgravity. Islands in the (ka, beta) parameter plane having a negative radiation force are calculated for the case of a hexane drop in water. Here k is the wave number and a is the drop radius. Low frequency approximations to the radiation force are noted for rigid, fluid, and elastic solid spheres in an inviscid fluid.     

Acoustic radiation force on a sphere in standing and quasi-standing zero-order Bessel beam tweezers

Starting from the exact acoustic scattering from a sphere immersed in an ideal fluid and centered along the propagation axis of a standing or quasi-standing zero-order Bessel beam, explicit partial-wave representations for the radiation force are derived. A standing or a quasi-standing acoustic field is the result of propagating two equal or unequal amplitude zero-order Bessel beams, respectively, along the same axis but in opposite sense. The Bessel beam is characterized by the half-cone angle β of its plane wave components, such that β = 0 represents a plane wave. It is assumed here that the half-cone angle β for each of the counter-propagating acoustic Bessel beams is equal. Fluid, elastic and viscoelastic spheres immersed in water are treated as examples. Results indicate the capability of manipulating spherical targets based on their mechanical and acoustical properties. This condition provides an impetus for further designing acoustic tweezers operating with standing or quasi-standing Bessel acoustic waves. Potential applications include particle manipulation in micro-fluidic lab-on-chips as well as in reduced gravity environments.     

球形粒子在Bessel波束照射下的轴向辐射力计算和分析

通过声散射理论,将水中粒子的Bessel波束声散射场的分波序列(PWS)表达公式加以推广,进而推导出声辐射力的表达公式,获得了液体球及弹性球在Bessel波束下声辐射力的变化规律。通过观察不同散射角形态函数,可发现声辐射力的产生与粒子背向散射抑制程度有关。对于液体球粒子,球壳厚度及材料介质对粒子声辐射力有着重要的影响,同时Bessel波束波锥角越大,产生负声辐射力的可能性越大。对于弹性球和弹性单层壳粒子,声辐射力的产生与其本身的共振特征存在很大的关系。同时,通过改变球壳内介质及壳层厚度的方法,可增加产生的负声辐射力的频率范围及幅值强度.      

Negative axial radiation forces on solid spheres and shells in a Bessel beam

Prior computations predict that fluid spheres illuminated by an acoustic Bessel beam can be subjected to a radiation force directed opposite the direction of beam propagation. The prediction of negative acoustic radiation force is extended to the cases of a solid poly(methylmethacrylate) PMMA sphere in water and an empty aluminum spherical shell in water. Compared with the angular scattering patterns for plane wave illumination, the scattering into the back hemisphere is suppressed when the radiation force is negative. This investigation may be helpful in the development of acoustic tweezers and in the development of methods for manipulating objects during space flight.     

Reflection of an Ultrashort Pulse by an Ideally Conducting Cylinder

A technique for calculating the backscattering of ultrashort pulses of plane waves by an ideally conducting cylinder is described on the basis of the spectral representation. The Rayleigh solution in the Bessel function series representation is used to determine the scattering spectral components. The Gabor impulse reflection is investigated. A method for remote determination of the cylinder diameter from the shift of scattered field amplitude peaks is described.     

Disordered clean surfaces and adsorbates investigated with atom-surface scattering

In this paper two different physical situations are considered which can be treated with the same method: a fluid adsorbate (disordered in the x, y plane) and a clean surface with random steps (disordered in the z direction). The hard corrugated wall model is used in the eikonal approximation; the differences between the two cases arise only from the different statistical properties of the two physical situations. The differential scattering probability is evaluated. For the fluid adsorbate the latter splits into a coherent (purely specular) contribution and an incoherent one (which is, in fact, weakly inelastic and related to classical diffusion on the surface). For stepped “rough” surfaces only incoherent scattering is present and the differential scattering probability for hexagonal lattices is given.     

Electric and magnetic losses modeled by a stable hybrid with explicit–implicit time-stepping for Maxwell’s equations

A stable hybridization of the finite-element method (FEM) and the finite-difference time-domain (FDTD) scheme for Maxwell’s equations with electric and magnetic losses is presented for two-dimensional problems. The hybrid method combines the flexibility of the FEM with the efficiency of the FDTD scheme and it is based directly on Ampère’s and Faraday’s law. The electric and magnetic losses can be treated implicitly by the FEM on an unstructured mesh, which allows for local mesh refinement in order to resolve rapid variations in the material parameters and/or the electromagnetic field. It is also feasible to handle larger homogeneous regions with losses by the explicit FDTD scheme connected to an implicitly time-stepped and lossy FEM region. The hybrid method shows second-order convergence for smooth scatterers. The bistatic radar cross section (RCS) for a circular metal cylinder with a lossy coating converges to the analytical solution and an accuracy of 2% is achieved for about 20 points per wavelength. The monostatic RCS for an airfoil that features sharp corners yields a lower order of convergence and it is found to agree well with what can be expected for singular fields at the sharp corners. A careful convergence study with resolutions from 20 to 140 points per wavelength provides accurate extrapolated results for this non-trivial test case, which makes it possible to use as a reference problem for scattering codes that model both electric and magnetic losses.     

Interaction of a high-order Bessel beam with a submerged spherical ultrasound contrast agent shell - Scattering theory

Background and objective

Acoustic scattering properties of ultrasound contrast agents are useful in extending existing or developing new techniques for biomedical imaging applications. A useful first step in this direction is to investigate the acoustic scattering of a new class of acoustic beams, known as helicoidal high-order Bessel beams, to improve the understanding of their scattering characteristics by an ultrasound contrast agent, which at present is very limited.

Method

The transverse acoustic scattering of a commercially available albuminoidal ultrasound contrast agent shell filled with air or a denser gas such as perfluoropropane and placed in a helicoidal Bessel beam of any order is examined numerically. The shell is assumed to possess an outer radius a = 3.5 microns and a thickness of ∼105 nm. Moduli of the total and resonance transverse acoustic scattering form functions are numerically evaluated in the bandwidth 0 < ka? 3, which corresponds to a frequency bandwidth of 0-205 MHz that covers a wide range of applications for imaging with contrast agents. Particular attention is paid to the shell’s material, the content of its interior hollow region and the fluid surrounding its exterior. The contrast agent shell is assumed to be immersed in an ideal compressible fluid so the viscous corrections are not considered. Analytical equations are derived and numerical calculations of the total and resonance form functions are performed with particular emphasis on the effect of varying the half-cone angle, the order of the helicoidal Bessel beam as well as the fluid that fills the interior hollow space.

Results and conclusion

It is shown that shell wave resonance modes can be excited on an encapsulated micro-bubble. The forward and backscattering vanish for a helicoidal high-order Bessel beam. Additionally, the fluid filling the inner core affects the shell’s response significantly. Moreover, there is no monopole contribution to the axial scattering of a helicoidal Bessel beam of order m ? 1 so that the dynamics of contrast agents would be significantly altered. The main finding of the present theory is the suppression or enhancement for a particular resonance that may be used to advantage in imaging with ultrasound contrast agents for clinical applications.     

Scattering of an unpolarized Bessel beam by spheres

The scattering process of an unpolarized Bessel beam through spherical scatterers is investigated. We derive the analytical solutions of scattered fields of x-and y-polarized Bessel beams using a sphere, after which the dimensionless scattering function for an unpolarized Bessel beam is obtained. The dimensionless scattering function is applicable to spherical scatterers of any size on the beam axis or near it. Through numerical simulations, we demonstrate that extreme points exist in the direction or neighboring direction of the conical angle for spherical scatterers on the beam axis, whereas the existence of extreme points depends on the ratio between the spherical scatterers size and central spot size of the Bessel beam.     

Scattering of on-axis polarized Gaussian light beam by spheroidal water coating aerosol particle

Small particle light scattering can produce light with polarization characteristics different from those of the incident beam. An analytical solution to the scattering by a spheroid with inclusion for an on-axis polarized Gaussian beam incidence is provided within the generalized Lorenz-Mie theory framework. The shapes of the inclusion can be spherical, confocal spheroid, or non-confocal spheroid. The Muller scattering matrix elements are computed for plane wave incidence or Gaussian light beam incidence. The effect of the size and shape of the inclusion or the coating on the polarized Oaussian light scattering characteristics by a spheroidal water coating aerosol Darticle are commlted and a,nalvzed.     

Axial and transverse acoustic radiation forces on a fluid sphere placed arbitrarily in Bessel beam standing wave tweezers

The axial and transverse radiation forces on a fluid sphere placed arbitrarily in the acoustical field of Bessel beams of standing waves are evaluated. The three-dimensional components of the time-averaged force are expressed in terms of the beam-shape coefficients of the incident field and the scattering coefficients of the fluid sphere using a partial-wave expansion (PWE) method. Examples are chosen for which the standing wave field is composed of either a zero-order (non-vortex) Bessel beam, or a first-order Bessel vortex beam. It is shown here, that both transverse and axial forces can push or pull the fluid sphere to an equilibrium position depending on the chosen size parameter ka   (where k$k$ is the wave-number and a$a$ the sphere’s radius). The corresponding results are of particular importance in biophysical applications for the design of lab-on-chip devices operating with Bessel beams standing wave tweezers. Moreover, potential investigations in acoustic levitation and related applications in particle rotation in a vortex beam may benefit from the results of this study.     

Two-dimensional isotropic scattering in a semi-infinite cylindrical medium

Beginning with the integral equation for the source function, the solutions for the source function, flux and intensity at the boundary of a two-dimensional, isotropically scattering cylindrical medium are found. The incident radiation is collimated and normal to the surface of the medium and depends only on the radial coordinate. For a Bessel function boundary condition, separation of variables is used to reduce the source function integral equation to a one-dimensional equation. The resulting integral equation is shown to be the same as that for the two-dimensional planar case. Solutions for other boundary conditions are then shown to be superpositions of the Bessel function solution. Numerical results are presented for a Gaussian distribution of incident radiation which closely models a laser beam. These multiple scattering results are compared to the single scattering approximation. Also, the solution for a strongly anisotropic phase function which is made up of a spike in the forward direction superimposed on an otherwise isotropic phase function is expressed in terms of the isotropic results.     

Strongly accelerated and humidity-independent drying of nanochannels induced by sharp corners

Measurements are shown indicating that the drying rate of nanochannels can be enhanced by up to 3 orders of magnitude relative to drying by vapor diffusion, and that the drying rate is independent of the relative humidity of the environment up to a relative humidity of more than 90%. Micromachined Pyrex glass nanochannels of 72 nm height and with sharp corners (corner angles 7 degrees) were used. Available theory shows that the sharp corners function as a low-resistance pathway for liquid water, siphoning (wicking) the water to a location close to the channel exit before it evaporates. The described phenomena are of importance for the understanding of drying processes in industry and agriculture. The introduction of sharp corners or grooves can furthermore be beneficial for the functioning of microheat pipes and capillary-pumped loops.     

Two-dimensional rayleigh scattering in a semi-infinite cylindrical medium exposed to a laser beam

A modification of Ambarzumian's method is used to develop the integro-differential equations for the source function, flux, and intensity at the boundary of a two-dimensional, semi-infinite cylindrical medium with second order Legendre phase function scattering. The incident radiation is collimated, normal to the top surface, and is dependent only on the radial coordinate. Boundary conditions which vary as a Bessel function and as a Gaussian distribution are investigated. The Gaussian distribution approximates a laser beam. Numerical results are presented in graphical and tabular forms for a Rayleigh scattering medium. The results are compared with those of isotropic scattering.     

Surface-enhanced Raman scattering from silver nanostructures with different morphologies

Scanning electron microscopy and X-ray diffraction reveal that four different types of crystalline silver nanostructures including nanoparticles, nanowires, nanocubes, and bipyramids are synthesized by a solvothermal method by reducing silver nitrate with ethylene glycol using poly(vinylpyrrolidone) as an adsorption agent and adding different quantities of sodium chloride to the solution. These nanostructures which exhibit different surface plasma resonance properties in the ultraviolet–visible region are shown to be good surface-enhanced Raman scattering (SERS) substrates using rhodamine 6G molecules. Our results demonstrate that the silver nanocubes, bipyramids with sharp corners and edges, and aggregated silver nanoparticles possess better SERS properties than the silver nanowires, indicating that they can serve as high-sensitivity substrates in SERS-based measurements.     

Acoustic scattering in dispersions: improvements in the calculation of single particle scattering coefficients

Measurements of ultrasound speed and attenuation can be related to the properties of dispersed systems by applying a scattering model. Rayleigh's method for scattering of sound by a spherical object, and its subsequent developments to include viscous, thermal, and other effects (known as the ECAH model) has been widely adopted. The ECAH method has difficulties, including numerical ill-conditioning, calculation of Bessel functions at large arguments, and inclusion of thermal effects in all cases. The present work develops techniques for improving the ECAH calculations to allow its use in instrumentation. It is shown that thermal terms can be neglected in some boundary equations up to approximately 100 GHz in water, and several simplified solutions result. An analytical solution for the zero-order coefficient is presented, with separate nonthermal and thermal parts, allowing estimation of the thermal contribution. Higher orders have been simplified by estimating the small shear contribution as the inertial limit is approached. The condition of the matrix solutions have been greatly improved by these techniques and by including appropriate scaling factors. A method is presented for calculating the required Bessel functions when the argument is large (high frequency or large particle size). The required number of partial wave orders is also considered.     

Statistical mechanics of the one-dimensional plane rotator model in an external field

A method of calculating the partition function and the pair correlation function of the one-dimensional plane rotator model in an external field is proposed. In this method these quantities are expressed in terms of the modified Bessel function. These explicit expressions are given to fourth and second order, respectively.