Modeling three-dimensional propagation in a continental shelf environment

An acoustic propagation model is applied to predict measurements of three-dimensional (3-D) effects recorded off the southeast coast of Florida. The measured signal is produced by a low frequency source that is towed north parallel to the shelf from a fixed receiving array. The acoustic data show the direct path arrival at the bearing of the tow ship and a second refracted path arrival as much as 30° inshore of the direct arrival. Notably, the refracted arrival has a received level more than 25 dB greater than that of the direct arrival. A geoacoustic model of the environment is created to explain the data. It is shown that the topography of the seafloor plays the largest role in controlling horizontal refraction effects, whereas the range-dependent sediment properties have the most influence on the received level. The modeling approach is based on a 3-D adiabatic mode technique in which the horizontal refraction equation is solved using a parabolic equation in Cartesian coordinates. A modal decomposition of the field provides insight into the variability in the arrival angle and received level of the measured signal.     

A process of thermocline erosion on the Sicilian continental shelf

Summary We study a process of thermocline erosion measured in the Channel of Sicily in the period 16 November–December 1985. Evidence is presented that the transition from Summer to Winter stratification has been an impulsive process. We show that the erosion of the seasonal thermocline and the deepening of the surface mixed layer were stimulated by the action of two strong atmospheric perturbations. Possible relations between mixing events and internal wave breaking are discussed. Paper presented at the IV Congresso del Gruppo Nazionale per la Fisica dell'Atmosfera e dell'Oceano, June 22–24, 1987, Rome.     

Wind and current autumnal data series analysis on the Ligurian continental shelf

Summary An analysis of wind and current data collected in the Ligurian Sea (North Tyrrhenian Sea) during Autumn 1978 is made. It results that the dominant low-frequency fluctuations in current are not strongly correlated to wind fluctuations. Conclusions about the motion dynamics are reached by means of empirical orthogonal functions and other indicators.

---

Riassunto L'analisi dei dati di vento e correnti ottenuti nel Mar Ligure durante l'autunno 1978 permette di affermare che le fluttuazioni a basse frequenze delle correnti sono poco significativamente correlate alle fluttuazioni del vento. La dinamica del moto è studiata per mezzo delle funzioni ortogonali empiriche e calcolando i singoli termini dell'equazione ?along shore? del moto.

---

Резюме Проводится анализ данных для ветра и потоков, собранных в течение осени 1978 на Лигурийском море (северная часть Тиренского моря). Обнаружено, что доминирующие низкочастотные Флуктуации потоков не проявляют сильной корреляции с флуатуацииями ветра. Используя змпические ортогональные функции и другие индикаторы, делаются выводы относительно динамики движения.

     

Statistical analysis of sound transmission results obtained on the New Jersey continental shelf

Experiments have been conducted near the site of AMCOR Borehole 6010 on the New Jersey Shelf to evaluate propagation predictability in sandy shallow-water environments. The influence of a nonlinear frequency dependence of the sediment volume attenuation in the uppermost sediment layer at this location is examined. Previously it was determined that a frequency power-law exponent of 1.5 was required for the best modeling of experimental results over the band 50-1000 Hz. The approach here references the attenuation to an accepted value at 1 kHz and makes extensive comparisons between measurements and calculations, to determine a power-law exponent of 1.85+/-0.15.     

Observations of sound-speed fluctuations on the New Jersey continental shelf in the summer of 2006

Environmental sensors moored on the New Jersey continental shelf tracked constant density surfaces (isopycnals) for 35 days in the summer of 2006. Sound-speed fluctuations from internal-wave vertical isopycnal displacements and from temperature/salinity variability along isopycnals (spiciness) are analyzed using frequency spectra and vertical covariance functions. Three varieties of internal waves are studied: Diffuse broadband internal waves (akin to waves fitting the deep water Garrett/Munk spectrum), internal tides, and, to a lesser extent, nonlinear internal waves. These internal-wave contributions are approximately distinct in the frequency domain. It is found that in the main thermocline spicy thermohaline structure dominates the root mean square sound-speed variability, with smaller contributions coming from (in order) nonlinear internal waves, diffuse internal waves, and internal tides. The frequency spectra of internal-wave displacements and of spiciness have similar form, likely due to the advection of variable-spiciness water masses by horizontal internal-wave currents, although there are technical limitations to the observations at high frequency. In the low-frequency, internal-wave band the internal-wave spectrum follows frequency to the -1.81 power, whereas the spice spectrum shows a -1.73 power. Mode spectra estimated via covariance methods show that the diffuse internal-wave spectrum has a smaller mode bandwidth than Garrett/Munk and that the internal tide has significant energy in modes one through three.     

Magneto-optical measurements with a hybrid magnet

An FFT spectrometer has been constructed to measure magneto-optical spectra in the far-infrared region (3 to 40 cm^–1) with a hybrid magnet system. The magneto-absorption was studied in the spin-Peierls cuprate CuGeO₃ at various magnetic fields. Coil constants of superconducting magnet and resistive one, of which a hybrid magnet consists, were calibrated by ESR spectra at the constant field.     

Horizontal coherence of low-frequency fixed-path sound in a continental shelf region with internal-wave activity

Sound at 85 to 450 Hz propagating in approximately 80-m depth water from fixed sources to a joint horizontal/vertical line array (HLA/VLA) is analyzed. The data are from a continental shelf area east of Delaware Bay (USA) populated with tidally generated long- and short-wavelength internal waves. Sound paths are 19 km in the along-shore (along internal-wave crest) direction and 30 km in the cross-shore direction. Spatial statistics of HLA arrivals are computed as functions of beam steering angle and time. These include array gain, horizontally lagged spatial correlation function, and coherent beam power. These quantities vary widely in magnitude, and vary over a broad range of time scales. For example, correlation scale can change rapidly from forty to five wavelengths, and correlation-scale behavior is anisotropic. In addition, the vertical array can be used to predict correlation expected for adiabatic propagation with cylindrical symmetry, forming a benchmark. Observed variations are in concert with internal-wave activity. Temporal variations of three coherence measures, horizontal correlation length, array gain, and ratio of actual correlation length to predicted adiabatic-mode correlation length, are very strong, varying by almost a factor of ten as internal waves pass.     

大陆架低频声传播建模研究

在过去的几十年中大陆架斜坡海域的低频声传播得到越来越多的重视。针对爆炸声作为声源的一次海上实验测量数据,对大陆架海域的低频远距离声传播进行了建模研究。在实验过程中单水听器布放在水下大约240m处接收爆炸声信号,对两条不同测线的传播损失进行了处理。本文结合海底地声模型并考虑了声速剖面的水平变化,利用抛物方程方法对传播损失进行建模。模拟计算该海域的传播损失同实验测量数据相比具有较好的一致性。     

Multiobjective muffler shape optimization with hybrid acoustics modeling

This paper considers the combined use of a hybrid numerical method for the modeling of acoustic mufflers and a genetic algorithm for multiobjective optimization. The hybrid numerical method provides accurate modeling of sound propagation in uniform waveguides with non-uniform obstructions. It is based on coupling a wave based modal solution in the uniform sections of the waveguide to a finite element solution in the non-uniform component. Finite element method provides flexible modeling of complicated geometries, varying material parameters, and boundary conditions, while the wave based solution leads to accurate treatment of non-reflecting boundaries and straightforward computation of the transmission loss (TL) of the muffler. The goal of optimization is to maximize TL at multiple frequency ranges simultaneously by adjusting chosen shape parameters of the muffler. This task is formulated as a multiobjective optimization problem with the objectives depending on the solution of the simulation model. NSGA-II genetic algorithm is used for solving the multiobjective optimization problem. Genetic algorithms can be easily combined with different simulation methods, and they are not sensitive to the smoothness properties of the objective functions. Numerical experiments demonstrate the accuracy and feasibility of the model-based optimization method in muffler design.     

Parallel adaptation of general three-dimensional hybrid meshes

A new parallel dynamic mesh adaptation and load balancing algorithm for general hybrid grids has been developed. The meshes considered in this work are composed of four kinds of elements; tetrahedra, prisms, hexahedra and pyramids, which poses a challenge to parallel mesh adaptation. Additional complexity imposed by the presence of multiple types of elements affects especially data migration, updates of local data structures and interpartition data structures. Efficient partition of hybrid meshes has been accomplished by transforming them to suitable graphs and using serial graph partitioning algorithms. Communication among processors is based on the faces of the interpartition boundary and the termination detection algorithm of Dijkstra is employed to ensure proper flagging of edges for refinement. An inexpensive dynamic load balancing strategy is introduced to redistribute work load among processors after adaptation. In particular, only the initial coarse mesh, with proper weighting, is balanced which yields savings in computation time and relatively simple implementation of mesh quality preservation rules, while facilitating coarsening of refined elements. Special algorithms are employed for (i) data migration and dynamic updates of the local data structures, (ii) determination of the resulting interpartition boundary and (iii) identification of the communication pattern of processors. Several representative applications are included to evaluate the method.     

Application of ESPI to three-dimensional vibration measurements

There are many situation in vibration analysis where it is necessary or desirable to make three-dimensional measurements. By using three different illumination geometries around a single imaging system, electronic speckle pattern interferometry (ESPI) can be used to measure the orthogonal components of vibration amplitude independently. These can be combined to determine the three-dimensional amplitude and mode shape. Examples of experimental results are presented for volume vibrations of a thick cylinder, identification of vibration modes of a turbocharger blade, and observation of in-plane modes in a thin plate.     

Textural analyses of multibeam sonar imagery from Stanton Banks, Northern Ireland continental shelf

The mapping of marine habitats mainly relies on acoustic techniques and there is a clear need for reliable classification methods supplementing the interpreter with as much quantitative information as possible. This article presents textural analyses of multibeam sonar imagery from Stanton Banks, on the continental shelf off Northern Ireland. TexAn, originally developed for the textural analysis of sidescan sonar imagery, was tested over an area of ∼72 km² surveyed in 2005 by the European MESH project. The multibeam imagery is affected by several artefacts, including strong uncorrected angular variations in some tracks, and the acquisition of some tracks with very different aspects. The results from unsupervised classification of the imagery, using K-Means, match well the interpretations that can be made using concurrent bathymetric data and visual observations acquired in a later cruise. Textural analyses successfully detect faint trawlmarks and distinguish between the different types of seafloor, including variations within sediments, rocky outcrops and gullied terrains.     

Observation of the lower hybrid waves near the three-dimensional null pair

Magnetic reconnection is a fundamental process in plasma, which is thought to play important roles both in laboratory and natural plasmas through affecting magnetic topology, heating and accelerating particles. During an event on Oct. 1st, 2001, the Cluster tetrahedron circled around the magnetic reconnection region several times, and Xiao et al. first identified the null pair and found that the spectrum of the null-point oscillation shows the maximum power near the lower-hybrid frequency. In this paper we report the observation of electromagnetic and electrostatic wave enhancements near lower hybrid frequency associated with the reconnection process near the null pair. The lower hybrid waves (LHWs) with quasi-perpendicular propagation were identified and also confirmed by the power law of the spectrum of electric and magnetic fields. Supported by the National Natural Science Foundation of China (Grant Nos. 40325012, 40390151, 40574073, 40574074, and 40640420563), the Research Foundation from Ministry of Education of China (Grant No. 40174043), and the China Plan on the International Polar Year     

High-speed three-dimensional shape measurements of objects with laser speckles and acousto-optical deflection

Many three-dimensional (3D) shape measurement techniques in stereophotogrammetry with temporal coded structured illumination are limited to static scenes because the time for measurement is too long in comparison to the object speed. The measurement of moving objects result in erroneous reconstructions. This is apparent to reduce measurement time to overcome this limitation, which is often done by increasing the projection rate for illumination while shrinking the amount of images taken for reconstruction. The projection rate limits most applications in its speed because digital light processing (DLP) projectors, which are widely used, bring a limited projection rate along. Our approach, in contrast, does not take a DLP. Instead we use laser speckles as projected patterns which are switched using an acousto-optical deflector. The projection rate is 10× higher than what the fastest stripe projection systems to our knowledge achieve. Hence, we present this uncommon but potential approach for highspeed (≈250 3Dfps= [3D measurements per second]), dense, and accurate 3D measurements of spatially separated objects and show the media that emphasizes the ability of accurate measurements while the objects under testing move.     

Velocity measurements in jets with application to noise source modeling

This paper describes an experimental investigation of the statistical properties of turbulent velocity fluctuations in an axisymmetric jet. The focus is on those properties that are relevant to the prediction of noise. Measurements are performed using two single hot-wire anemometers as well as a two-component anemometer. Two-point cross correlations of the axial velocity fluctuations and of the fluctuations in the square of the axial velocity fluctuations are presented. Several reference locations in the jet are used including points on the jet lip and centerline. The scales of the turbulence and the convection velocity are determined, both in an overall sense as well as a function of frequency. The relationship between the second and fourth order correlations is developed and compared with the experimental data. The implications of the use of dimensional as well as non-dimensional correlations are considered. Finally, a comparison is made between the length scales deduced from the flow measurements and a RANS CFD calculation.     

Comparison of diffusion anisotropy measurements in combination with the flair-technique.

Fluid-attenuated inversion recovery (FLAIR) technique offers an effective tool to diminish partial-volume averaging effects from cerebrospinal (CSF) signal with in vivo magnetic resonance imaging. CSF-suppressed and unsuppressed direction-dependent diffusion-weighted (DW) images are obtained with a DW spin-echo EPI sequence in a single acquisition scheme. Comparison of unsuppressed and CSF-suppressed apparent diffusion coefficient (ADC) maps yields consistent values for brain tissue in volunteers when no partial-volume effects are expected, but differs considerably at borders of parenchyma to ventricles and sulci. From theory and phantom studies, a corrected anisotropy index is introduced considering differences of statistical fit errors. Anisotropy of white matter is observed in normal brain of volunteers. Anisotropy index maps reveal destruction of fiber tracts in pathologic areas. Results of a preliminary study on 12 patients with intra-axial tumors indicate an improved delineation of tumor boundaries of FLAIR ADC maps against unsuppressed acquisition.     

Structural-acoustic modeling for three-dimensional freefield and littoral environments with verification and validation

This paper describes a high-order, finite-element-based, three-dimensional time-harmonic model for large-scale exterior structural-acoustics problems. It is applicable to both freefield and littoral environments. For the freefield case, the infinite exterior is treated as a homogeneous linear acoustic medium. For littoral applications, the water or air and the sediment domains are each treated as linear homogeneous, semi-infinite half-spaces with piecewise-constant properties. Both domains admit complex-valued wave speeds to enable the inclusion of damping. The finite element formulation uses a variational statement which naturally incorporates the transmission-condition at the water or air-sediment interface. The truncation of the infinite exterior is realized using an infinite-element for the freefield case, and the perfectly-matched-layer approximation for littoral applications. Computation of the farfield quantities is done based on an integral representation which, for the littoral cases, uses efficient approximations for the appropriate Green's function. Numerical computations are presented for a series of progressively more complex problems, and are used to verify the model against analytic and other numerical solutions and validate it based on the experimental data for scattering from elastic scatterers as measured in freefield and sediment pool laboratory facilities.     

Direct measurement of the concurrence of hybrid entangled state based on parity check measurements

The hybrid entangled state is widely discussed in quantum information processing. In this paper, we propose the first protocol to directly measure the concurrence of the hybrid entangled state. To complete the measurement, we design parity check measurements(PCMs) for both the single polarization qubit and the coherent state. In this protocol, we perform three rounds of PCMs. The results show that we can convert the concurrence into the success probability of picking up the correct states from the initial entangled states. This protocol only uses polarization beam splitters, beam splitters, and weak cross-Kerr nonlinearities, which is feasible for future experiments. This protocol may be useful in future quantum information processing.     

Experiment and modeling of paired effect on evacuation from a three-dimensional space

A novel three-dimensional cellular automata evacuation model was proposed based on stairs factor for paired effect and variety velocities in pedestrian evacuation. In the model pedestrians' moving probability of target position at the next moment was defined based on distance profit and repulsive force profit, and evacuation strategy was elaborated in detail through analyzing variety velocities and repulsive phenomenon in moving process. At last, experiments with the simulation platform were conducted to study the relationships of evacuation time, average velocity and pedestrian velocity. The results showed that when the ratio of single pedestrian was higher in the system, the shortest route strategy was good for improving evacuation efficiency; in turn, if ratio of paired pedestrians was higher, it is good for improving evacuation efficiency to adopt strategy that avoided conflicts, and priority should be given to scattered evacuation.     

Density-functional theory with screened van der Waals interactions for the modeling of hybrid inorganic-organic systems

The electronic properties and the function of hybrid inorganic-organic systems (HIOS) are intimately linked to their interface geometry. Here we show that the inclusion of the many-body collective response of the substrate electrons inside the inorganic bulk enables us to reliably predict the HIOS geometries and energies. This is achieved by the combination of dispersion-corrected density-functional theory (the DFT+ van der Waals approach) [Phys. Rev. Lett. 102, 073005 (2009)], with the Lifshitz-Zaremba-Kohn theory for the nonlocal Coulomb screening within the bulk. Our method yields geometries in remarkable agreement (≈0.1 ?) with normal incidence x-ray standing wave measurements for the 3, 4, 9, 10-perylene-tetracarboxylic acid dianhydride (C(24)O(6)H(8), PTCDA) molecule on Cu(111), Ag(111), and Au(111) surfaces. Similarly accurate results are obtained for xenon and benzene adsorbed on metal surfaces.