Vacuum ultraviolet (VUV) photodecomposition of urea isolated in cryogenic matrix: first detection of isourea

Vacuum ultraviolet (VUV) irradiation at wavelengths of lambda > 160 nm of urea-h4 (NH2CONH2) and urea-d4 (ND2COND2) has been monitored by Fourier transform infrared spectroscopy in argon and xenon matrixes. Several primary photoproducts, such as HNCO:NH3 (isocyanic acid:ammonia), CO:N2H4 (carbon monoxide:hydrazine) molecular complexes, and isourea (H2N(OH)C=NH), which is reported for the first time, were characterized. The assignment of complexes was achieved by co-depositing the pairs of respective species, whereas the isourea identification was based on the comparison between the experimental and theoretical (B3LYP) infrared spectra. Isourea is found in the argon matrix in its most stable (s-Z)-(E) configuration. It is an intermediate in the VUV decomposition process; its dehydration leads to the NH2CN:H2O complex. In the xenon matrix, the photochemistry of urea yields the HNCO:NH3 complex as a major product, whereas the CO:N2H4 complex is observed in trace amounts. The observed differences between the argon and xenon matrixes suggest the crossing between S1 and T1 potential surfaces of urea to be responsible for the formation of the HNCO:NH3 complex. A comparison is also performed with other carboxamides, such as formamide (HCONH2) or acetamide (CH3CONH2).     

An ab initio study toward understanding the mechanistic photochemistry of acetamide

The potential energy surfaces for CH(3)CONH(2) dissociation into CH(3) + CONH(2), CH(3)CO + NH(2), CH(3)CN + H(2)O, and CH(3)NH(2) + CO in the ground and lowest triplet states have been mapped with DFT, MP2, and CASSCF methods with the cc-pVDZ and cc-pVTZ basis sets, while the S(1) potential energy surfaces for these reactions were determined by the CASSCF/cc-pVDZ optimizations followed by CASSCF/MRSDCI single-point calculations. The reaction pathways leading to different photoproducts are characterized on the basis of the computed potential energy surfaces and surface crossing points. A comparison of the reactivity among HCONH(2), CH(3)CONH(2), and CH(3)CONHCH(3) has been made, which provides some new insights into the mechanism of the ultraviolet photodissociation of small amides.     

Metal-catalyzed anaerobic disproportionation of hydroxylamine. Role of diazene and nitroxyl intermediates in the formation of N2, N2O, NO+, and NH3

The catalytic disproportionation of NH(2)OH has been studied in anaerobic aqueous solution, pH 6-9.3, at 25.0 degrees C, with Na(3)[Fe(CN)(5)NH(3)].3H(2)O as a precursor of the catalyst, [Fe(II)(CN)(5)H(2)O](3)(-). The oxidation products are N(2), N(2)O, and NO(+) (bound in the nitroprusside ion, NP), and NH(3) is the reduction product. The yields of N(2)/N(2)O increase with pH and with the concentration of NH(2)OH. Fast regime conditions involve a chain process initiated by the NH(2) radical, generated upon coordination of NH(2)OH to [Fe(II)(CN)(5)H(2)O](3)(-). NH(3) and nitroxyl, HNO, are formed in this fast process, and HNO leads to the production of N(2), N(2)O, and NP. An intermediate absorbing at 440 nm is always observed, whose formation and decay depend on the medium conditions. It was identified by UV-vis, RR, and (15)NMR spectroscopies as the diazene-bound [Fe(II)(CN)(5)N(2)H(2)](3)(-) ion and is formed in a competitive process with the radical path, still under the fast regime. At high pH's or NH(2)OH concentrations, an inhibited regime is reached, with slow production of only N(2) and NH(3). The stable red diazene-bridged [(NC)(5)FeHN=NHFe(CN)(5)](6)(-) ion is formed at an advanced degree of NH(2)OH consumption.     

Transformation of ammonium dicyanamide into dicyandiamide in the solid

Ammonium dicyanamide NH(4)[N(CN)(2)] was synthesized through aqueous ion exchange. The crystal structure was investigated by single-crystal X-ray diffraction (P2(1)/c, a = 378.67(6) pm, b = 1240.9(3) pm, c = 911.84(14) pm, beta = 91.488(18) degrees, Z = 4). It derives from the CsCl structure type. Medium strong hydrogen bonds between NH(4)(+) and [N(CN)(2)](-) ions are indicative of the observed formation of dicyandiamide H(4)C(2)N(4) during heating. According to DSC and temperature-dependent X-ray powder diffractometry, this isomerization is exothermic and occurs between 102 and 106 degrees C in the solid. The reaction represents the isolobal analogue to the classical synthesis of urea by heating NH(4)OCN. While other alkali and alkaline earth dicyanamides undergo trimerization or polymerization of their anions during heating, ammonium dicyanamide thus shows a different reactivity.     

Disproportionation of O-methylhydroxylamine catalyzed by aquapentacyanoferrate(II)

The aquapentacyanoferrate(II) ion, [Fe(II)(CN)(5)H(2)O](3-), catalyzes the disproportionation reaction of O-methylhydroxylamine, NH(2)OCH(3), with stoichiometry 3NH(2)OCH(3) → NH(3) + N(2) + 3CH(3)OH. Kinetic and spectroscopic evidence support an initial N coordination of NH(2)OCH(3) to [Fe(II)(CN)(5)H(2)O](3-) followed by a homolytic scission leading to radicals [Fe(II)(CN)(5)(?)NH(2)](3-) (a precursor of Fe(III) centers and bound NH(3)) and free methoxyl, CH(3)O(?), thus establishing a radical path leading to N-methoxyamino ((?)NHOCH(3)) and 1,2-dimethoxyhydrazine, (NHOCH(3))(2). The latter species is moderately stable and proposed to be the precursor of N(2) and most of the generated CH(3)OH. Intermediate [Fe(III)(CN)(5)L](2-) complexes (L = NH(3), H(2)O) form dinuclear cyano-bridged mixed-valent species, affording a catalytic substitution of the L ligands promoted by [Fe(II)(CN)(5)L](3-). Free or bound NH(2)OCH(3) may act as reductants of [Fe(III)(CN)(5)L](2-), thus regenerating active sites. At increasing concentrations of NH(2)OCH(3) a coordinated diazene species emerges, [Fe(II)(CN)(5)N(2)H(2)](3-), which is consumed by the oxidizing CH(3)O(?), giving N(2) and CH(3)OH. Another side reaction forms [Fe(II)(CN)(5)N(O)CH(3)](3-), an intermediate containing the nitrosomethane ligand, which is further oxidized to the nitroprusside ion, [Fe(II)(CN)(5)NO](2-). The latter is a final oxidation product with a significant conversion of the initial [Fe(II)(CN)(5)H(2)O](3-) complex. The side reaction partially blocks the Fe(II)-aqua active site, though complete inhibition is not achieved because the radical path evolves faster than the formation rates of the Fe(II)-NO(+) bonds.     

Nitrosation of N-methylhydroxylamine by nitroprusside. A kinetic and mechanistic study

The kinetics of the reaction between aqueous solutions of Na(2)[Fe(CN)(5)NO].2H(2)O (sodium pentacyanonitrosylferrate(ii), nitroprusside, SNP) and MeN(H)OH (N-methylhydroxylamine, MeHA) has been studied by means of UV-vis spectroscopy, using complementary solution techniques: FTIR/ATR, EPR, mass spectrometry and isotopic labeling ((15)NO), in the pH range 7.1-9.3, I = 1 M (NaCl). The main products were N-methyl-N-nitrosohydroxylamine (MeN(NO)OH) and [Fe(CN)(5)H(2)O](3-), characterized as the [Fe(CN)(5)(pyCONH(2))](3-) complex (pyCONH(2) = isonicotinamide). No reaction occurred with Me(2)NOH (N,N-dimethylhydroxylamine, Me(2)HA) as nucleophile. The rate law was: R = k(exp) [Fe(CN)(5)NO(2-)] x [MeN(H)OH] x [OH(-)], with k(exp) = 1.6 +/- 0.2 x 10(5) M(-2) s(-1), at 25.0 degrees C, and DeltaH(#) = 34 +/- 3 kJ mol(-1), DeltaS(#) = -32 +/- 11 J K(-1) mol(-1), at pH 8.0. The proposed mechanism involves the formation of a precursor associative complex between SNP and MeHA, followed by an OH(-)-assisted reversible formation of a deprotonated adduct, [Fe(CN)(5)(N(O)NMeOH)](3-), and rapid dissociation of MeN(NO)OH. In excess SNP, the precursor complex reacts through a competitive one-electron-transfer path, forming the [Fe(CN)(5)NO](3-) ion with slow production of small quantities of N(2)O. The stoichiometry and mechanism of the main adduct-formation path are similar to those previously reported for hydroxylamine (HA) and related nucleophiles. The nitrosated product, MeN(NO)OH, decomposes thermally at physiological temperatures, slowly yielding NO.     

Structure and Properties of [Fe(4)S(4){2,6-bis(acylamino)benzenethiolato-S}(4)](2)(-) and [Fe(2)S(2){2,6-bis(acylamino)benzenethiolato-S}(4)](2)(-): Protection of the Fe-S Bond by Double NH.S Hydrogen Bonds

Iron-sulfur clusters containing a singly or doubly NH.S hydrogen-bonded arenethiolate ligand, [Fe(4)S(4)(S-2-RCONHC(6)H(4))(4)](2)(-) (R = CH(3), t-Bu, CF(3)), [Fe(4)S(4){S-2,6-(RCONH)(2)C(6)H(3)}(4)](2)(-), [Fe(2)S(2)(S-2-RCONHC(6)H(4))(4)](2)(-) (R = CH(3), t-Bu, CF(3)), and [Fe(2)S(2){S-2,6-(RCONH)(2)C(6)H(3)}(4)](2)(-), were synthesized as models of bacterial [4Fe-4S] and plant-type [2Fe-2S] ferredoxins. The X-ray structures and IR spectra of (PPh(4))(2)[Fe(4)S(4){S-2,6-(CH(3)CONH)(2)C(6)H(3)}(4)].2CH(3)CN and (NEt(4))(2)[Fe(2)S(2){S-2,6-(t-BuCONH)(2)C(6)H(3)}(4)] indicate that the two amide NH groups at the o,o'-positions are directed to the thiolate sulfur atom and form double NH.S hydrogen bonds. The NH.S hydrogen bond contributes to the positive shift of the redox potential of not only (Fe(4)S(4))(+)/(Fe(4)S(4))(2+) but also (Fe(4)S(4))(2+)/(Fe(4)S(4))(3+) in the [4Fe-4S] clusters as well as (Fe(2)S(2))(2+)/(Fe(2)S(2))(3+) in the [2Fe-2S] clusters. The doubly NH.S hydrogen-bonded thiolate ligand effectively prevents the ligand exchange reaction by benzenethiol because the two amide NH groups stabilize the thiolate by protection from dissociation.     

Electron stimulated desorption of anions from native and brominated single stranded oligonucleotide trimers

We measured the low energy electron stimulated desorption (ESD) of anions from thin films of native (TXT) and bromine monosubstituted (TBrXT) oligonucleotide trimers deposited on a gold surface (T = thymidine, X = T, deoxycytidine (C), deoxyadenosine (A) or deoxyguanosine (G), Br = bromine). The desorption of H(-), CH(3)(-)/NH(-), O(-)/NH(2)(-), OH(-), CN(-), and Br(-) was induced by 0 to 20 eV electrons. Dissociative electron attachment, below 12 eV, and dipolar dissociation, above 12 eV, are responsible for the formation of these anions. The comparison of the results obtained for the native and brominated trimers suggests that the main pathways of TBrXT degradation correspond to the release of the hydride and bromide anions. Significantly, the presence of bromine in oligonucleotide trimers blocks the electron-induced degradation of nuclobases as evidenced by a dramatic decrease in CN(-) desorption. An increase in the yields of OH(-) is also observed. The debromination yield of particular oligonucleotides diminishes in the following order: BrdU?>?BrdA?>?BrdG?>?BrdC. Based on these results, 5-bromo-2(')-deoxyuridine appears to be the best radiosensitizer among the studied bromonucleosides.     

Reaction of an osmium(VI) nitrido complex with cyanide: formation and reactivity of an osmium(III) hydrogen cyanamide complex

Reaction of [Os(VI)(N)(L(1))(Cl)(OH(2))] (1) with CN(-) under various conditions affords (PPh(4))[Os(VI)(N)(L(1))(CN)(Cl)] (2), (PPh(4))(2)[Os(VI)(N)(L(2))(CN)(2)] (3), and a novel hydrogen cyanamido complex, (PPh(4))(2)[Os(III){N(H)CN}(L(3))(CN)(3)] (4). Compound 4 reacts readily with both electrophiles and nucleophiles. Protonation and methylation of 4 produce (PPh(4))[Os(III)(NCNH(2))(L(3))(CN)(3)] (5) and (PPh(4))[Os(III)(NCNMe(2))(L(3))(CN)(3)] (6), respectively. Nucleophilic addition of NH(3), ethylamine, and diethylamine readily occur at the C atom of the hydrogen cyanamide ligand of 4 to produce osmium guanidine complexes with the general formula [Os(III){N(H)C(NH(2))NR(1)R(2)}(L(3))(CN)(3)](-) , which have been isolated as PPh(4) salts (R(1) = R(2) = H (7); R(1) = H, R(2) = CH(2)CH(3) (8); R(1) = R(2) = CH(2)CH(3) (9)). The molecular structures of 1-5 and 7 and 8 have been determined by X-ray crystallography.     

The role of carboxylate ligands in two novel cyanido-bridged 2D coordination networks Cu(II)-W(V) and Mn(II)-Nb(IV)

We report on the synthesis, molecular structure and magnetic properties of two novel coordination polymers: [{Cu(II)(4)(pic)(2)(H(2)O)(2)(MeOH)}{W(V)(CN)(8)}(2)]·MeOH·4H(2)O (1) and [{Mn(II)(3)(HCOO)(2)(H(2)O)(4)}{Mn(II)(H(2)O)(3)(HCONH(2))}(2){Nb(IV)(CN)(8)}(2)]·4HCONH(2)·2H(2)O (2). The single-crystal X-ray diffraction analysis of 1 shows that its molecular structure can be interpreted as a cyanido bridged (3,4,7)-connected 2D bilayer built of two different subnets sharing the tungsten centers. The magnetic measurements suggest that the system reveals long-range ferromagnetic ordering between Cu(II) and W(V) centers below 13.4 K. The molecular structure of (2) reveals a 2D topology of layers built of cyanido and formato bridging ligands. The system reveals ferrimagnetic behavior with a critical temperature at 17.8 K.     

Electron capture in charge-tagged peptides. Evidence for the role of excited electronic states

Electron capture dissociation (ECD) was studied with doubly charged dipeptide ions that were tagged with fixed-charge tris-(2,4,6-trimethoxyphenyl)phosphonium-methylenecarboxamido (TMPP-ac) groups. Dipeptides GK, KG, AK, KA, and GR were each selectively tagged with one TMPP-ac group at the N-terminal amino group while the other charge was introduced by protonation at the lysine or arginine side-chain groups to give (TMPP-ac-peptide + H)(2+) ions by electrospray ionization. Doubly tagged peptide derivatives were also prepared from GK, KG, AK, and KA in which the fixed-charge TMPP-ac groups were attached to the N-terminal and lysine side-chain amino groups to give (TMPP-ac-peptide-ac-TMPP)(2+) dications by electrospray. ECD of (TMPP-ac-peptide + H)(2+) resulted in 72% to 84% conversion to singly charged dissociation products while no intact charge-reduced (TMPP-ac-dipeptide + H)(+) ions were detected. The dissociations involved loss of H, formation of (TMPP + H)(+), and N-C(alpha) bond cleavages giving TMPP-CH(2)CONH(2)(+) (c(0)) and c(1) fragments. In contrast, ECD of (TMPP-ac-peptide-ac-TMPP)(2+) resulted in 31% to 40% conversion to dissociation products due to loss of neutral TMPP molecules and 2,4,6-trimethoxyphenyl radicals. No peptide backbone cleavages were observed for the doubly tagged peptide ions. Ab initio and density functional theory calculations for (Ph(3)P-ac-GK + H)(2+) and (H(3)P-ac-GK + H)(2+) analogs indicated that the doubly charged ions contained the lysine side-chain NH(3)(+) group internally solvated by the COOH group. The distance between the charge-carrying phosphonium and ammonium atoms was calculated to be 13.1-13.2 A in the most stable dication conformers. The intrinsic recombination energies of the TMPP(+)-ac and (GK + H)(+) moieties, 2.7 and 3.15 eV, respectively, indicated that upon electron capture the ground electronic states of the (TMPP-ac-peptide + H)(+*) ions retained the charge in the TMPP group. Ground electronic state (TMPP-ac-GK + H)(+*) ions were calculated to spontaneously isomerize by lysine H-atom transfer to the COOH group to form dihydroxycarbinyl radical intermediates with the retention of the charged TMPP group. These can trigger cleavages of the adjacent N-C(alpha) bonds to give rise to the c(1) fragment ions. However, the calculated transition-state energies for GK and GGK models suggested that the ground-state potential energy surface was not favorable for the formation of the abundant c(0) fragment ions. This pointed to the involvement of excited electronic states according to the Utah-Washington mechanism of ECD.     

Solubility, complex formation, and redox reactions in the Tl2O3-HCN/CN(-)-H2O system. Crystal structures of the cyano compounds Tl(CN)3.H2O, Na[Tl(CN)4].3H2O, K[Tl(CN)4], and Tl(I)[Tl(III)(CN)4] and of Tl(I)2C2O4

Thallium(III) oxide can be dissolved in water in the presence of strongly complexing cyanide ions. Tl(III) is leached from its oxide both by aqueous solutions of hydrogen cyanide and by alkali-metal cyanides. The dominating cyano complex of thallium(III) obtained by dissolution of Tl2O3 in HCN is [Tl(CN)3(aq)] as shown by 205Tl NMR. The Tl(CN)3 species has been selectively extracted into diethyl ether from aqueous solution with the ratio CN-/Tl(III) = 3. When aqueous solutions of the MCN (M = Na+, K+) salts are used to dissolve thallium(III) oxide, the equilibrium in liquid phase is fully shifted to the [Tl(CN)4]- complex. The Tl(CN)3 and Tl(CN)4- species have for the first time been synthesized in the solid state as Tl(CN)3.H2O (1), M[Tl(CN)4] (M = Tl (2) and K (3)), and Na[Tl(CN)4].3H2O (4) salts, and their structures have been determined by single-crystal X-ray diffraction. In the crystal structure of 1, the thallium(III) ion has a trigonal bipyramidal coordination with three cyanide ions in the equatorial plane, while an oxygen atom of the water molecule and a nitrogen atom from a cyanide ligand, attached to a neighboring thallium complex, form a linear O-Tl-N fragment. In the three compounds of the tetracyano-thallium(III) complex, 2-4, the [Tl(CN)4]- unit has a distorted tetrahedral geometry. Along with the acidic leaching (enhanced by Tl(III)-CN- complex formation), an effective reductive dissolution of the thallium(III) oxide can also take place in the Tl2O3-HCN-H2O system yielding thallium(I), while hydrogen cyanide is oxidized to cyanogen. The latter is hydrolyzed in aqueous solution giving rise to a number of products including (CONH2)2, NCO-, and NH4+ detected by 14N NMR. The crystalline compounds, Tl(I)[Tl(III)(CN)4], Tl(I)2C2O4, and (CONH2)2, have been obtained as products of the redox reactions in the system.     

Microsolvation of the dicyanamide anion: [N(CN)(2)(-)](H(2)O)n (n = 0-12)

Photoelectron spectroscopy is combined with ab initio calculations to study the microsolvation of the dicyanamide anion, N(CN)(2)(-). Photoelectron spectra of [N(CN)(2)(-)](H2O)n (n = 0-12) have been measured at room temperature and also at low temperature for n = 0-4. Vibrationally resolved photoelectron spectra are obtained for N(CN)(2)(-), allowing the electron affinity of the N(CN)2 radical to be determined accurately as 4.135 +/- 0.010 eV. The electron binding energies and the spectral width of the hydrated clusters are observed to increase with the number of water molecules. The first five waters are observed to provide significant stabilization to the solute, whereas the stabilization becomes weaker for n > 5. The spectral width, which carries information about the solvent reorganization upon electron detachment in [N(CN)(2)(-)](H2O)n, levels off for n > 6. Theoretical calculations reveal several close-lying isomers for n = 1 and 2 due to the fact that the N(CN)(2)(-) anion possesses three almost equivalent hydration sites. In all the hydrated clusters, the most stable structures consist of a water cluster solvating one end of the N(CN)(2)(-) anion.     

CH3 CH2 +N(4S)反应机理的理论研究

The reaction for CH3CH2+N(4S) was studied by ab initio method. The geometries of the reactants, intermediates, transition states and products were optimized at MP2/6-311+G(d,p) level. The corresponding vibration frequencies were calculated at the same level. The single point calculations for all the stationary points were carried out at the QCISD(T)/ 6-311+G(d,p) level using the MP2/6-311+G(d,p) optimized geometries. The results of the theoretical study indicate that the major products are the CH2CH2+3NH and H2CN＋CH3, and the minor products are the CH3CHN+H in the reaction. The majority of the products CH2CH2+3NH are formed via a direct hydrogen abstraction channel. The products H2CN＋CH3 are produced via an addition/dissociation channel. The products CH3CHN+H are produced via an addition/dissociation channel.     

Coordination chemistry of the soft chiral Lewis acid [Cp*Ir(TsDPEN)]+

The paper surveys the binding of anions to the unsaturated 16e Lewis acid [Cp*Ir(TsDPEN)](+) ([1H](+)), where TsDPEN is racemic H(2)NCHPhCHPhNTs(-). The derivatives Cp*IrX(TsDPEN) were characterized crystallographically for X(-) = CN(-), Me(C═NH)S(-), NO(2)(-), 2-pyridonate, and 0.5 MoS(4)(2-). [(1H)(2)(μ-CN)](+) forms from [1H](+) and 1H(CN). Aside from 2-pyridone, amides generally add reversibly and bind to Ir through N. Thioacetamide binds irreversibly through sulfur. Compounds of the type Cp*IrX(TsDPEN) generally form diastereoselectively, although diastereomeric products were observed for the strong ligands (X = CN(-), H(-) (introduced via BH(4)(-)), or Me(C═NH)S(-)). Related experiments on the reaction (p-cymene)Ru(TsDPEN-H) + BH(4)(-) gave two diastereomers of (p-cymene)RuH(TsDPEN), the known hydrogenation catalyst and a second isomer that hydrogenated acetophenone more slowly. These experiment provide new insights into the enantioselectivity of these catalysts. Diastereomerization in all cases was first order in metal with modest solvent effects. The diphenyl groups are generally diequatorial for the stable diastereomers. For the 2-pyridonate adduct, axial phenyl groups are stabilized in the solid state by puckering of the IrN(2)C(2) ring induced by intramolecular hydrogen-bonding. Crystallographic analysis of [Cp*Ir(TsDPEN)](2)(MoS(4)) revealed a unique example of a κ(1),κ(1)-tetrathiometallate ligand. Cp*Ir(SC(NH)Me)TsDPEN) is the first example of a κ(1)-S-thioamidato complex.     

Photodissociation of CO2 - in water clusters via Renner-Teller and conical interactions

The photochemistry of mass selected CO(2) (-)(H2O)(m), m=2-40 cluster anions is investigated using 266 nm photofragment spectroscopy and theoretical calculations. Similar to the previous 355 nm experiment [Habteyes et al., Chem. Phys. Lett. 424, 268 (2006)], the fragmentation at 266 nm yields two types of anionic products: O(-)(H2O)(m-k) (core-dissociation products) and CO(2) (-)(H2O)(m-k) (solvent-evaporation products). Despite the same product types, different electronic transitions and dissociation mechanisms are implicated at 355 and 266 nm. The 355 nm dissociation is initiated by excitation to the first excited electronic state of the CO(2) (-) cluster core, the 1 (2)B(1)(2A") state, and proceeds via a glancing Renner-Teller intersection with the ground electronic state at a linear geometry. The 266 nm dissociation involves the second excited electronic state of CO(2) (-), the 2 (2)A(1)(2A') state, which exhibits a conical intersection with the 3 (2)B(2)(A') state at a bent geometry. The asymptotic O(-) based products are believed to be formed via this 3 (2)B(2)(A') state. By analyzing the fragmentation results, the bond dissociation energy of CO(2) (-) to O(-)+CO in hydrated clusters (m> or =20) is estimated as 2.49 eV, compared to 3.46 eV for bare CO(2) (-). The enthalpy of evaporation of one water molecule from asymptotically large CO(2) (-)(H(2)O)(m) clusters is determined to be 0.466+/-0.001 eV (45.0+/-0.1 kJ/mol). This result compares very favorably with the heat of evaporation of bulk water, 0.456 eV (43.98 kJ/mol).     

NMR spectroscopic and X-ray crystallographic study of methylcobalt(III) compounds with saturated amine ligands

The (13)C chemical shifts of methylcobalt(III) compounds with saturated amine ligands in cis positions to the methyl group and a monodentate ligand, L = CN(-), NH(3), NO(2)(-), N(3)(-), H(2)O, or OH(-), in the trans position are reported. The amine ligands used, 1,2-ethanediamine (en), 1,3-propanediamine (tn), N,N'-bis(2-aminoethyl)-1,3-propanediamine (2,3,2-tet), N,N'-bis(3-aminopropyl)-1,2-ethanediamine (3,2,3-tet), and 1,4,8,11-tetraazacyclotetradecane (cyclam), all exert an apparent cis influence on the (13)C resonance signal of the coordinated methyl group. In the trans-[Co(en)(2)(CH(3))(L)](n+) series the (15)N resonance frequency of the coordinated en has also been measured. The influence of L on the en (15)N chemical shifts is reverse the influence on the methyl (13)C chemical shifts except in the case of L = NO(2)(-), which affects a further deshielding of the amine nitrogen nucleus. The methyl (1)J(CH) coupling constants in the trans-[Co(en)(2)(CH(3))(L)](n+) series range from 128.09 Hz (L = CN(-)) to 134.11 Hz (L = H(2)O). The crystal structures of trans-[Co(en)(2)(CH(3))(ClZnCl(3))], trans-[Co(3,2,3-tet)(CH(3))(N(3))]ClO(4), trans,trans-[(CH(3))(en)(2)Co(CN)Co(en)(2)(CH(3))](PF(6))(3)(CH(3)CN), and cis-[Co(en)(2)(CH(3))(NH(3))]ZnCl(4) were determined from low-temperature X-ray diffraction data.     

The electrophilic reactions of pentacyanonitrosylferrate(II) with hydrazine and substituted derivatives. Catalytic reduction of nitrite and theoretical prediction of eta(1)-, eta(2)-N(2)O bound intermediates

The electrophilic reactivity of the pentacyanonitrosylferrate(II) ion, [Fe(CN)(5)NO](2)(-), toward hydrazine (Hz) and substituted hydrazines (MeHz, 1,1-Me(2)Hz, and 1,2-Me(2)Hz) has been studied by means of stoichiometric and kinetic experiments (pH 6-10). The reaction of Hz led to N(2)O and NH(3), with similar paths for MeHz and 1,1-Me(2)Hz, which form the corresponding amines. A parallel path has been found for MeHz, leading to N(2)O, N(2), and MeOH. The reaction of 1,2-Me(2)Hz follows a different route, characterized by azomethane formation (MeNNMe), full reduction of nitrosyl to NH(3), and intermediate detection of [Fe(CN)(5)NO](3)(-). In the above reactions, [Fe(CN)(5)H(2)O](3)(-) was always a product, allowing the system to proceed catalytically for nitrite reduction, an issue relevant in relation to the behavior of the nitrite and nitric oxide reductase enzymes. The mechanism comprises initial reversible adduct formation through the binding of the nucleophile to the N-atom of nitrosyl. The adducts decompose through OH(-) attack giving the final products, without intermediate detection. Rate constants for the adduct-formation steps (k = 0.43 M(-)(1) s(-)(1), 25 degrees C for Hz) decrease with methylation by about an order of magnitude. Among the different systems studied, one-, two-, and multielectron reductions of bound NO(+) are analyzed comparatively, with consideration of the role of NO, HNO (nitroxyl), and hydroxylamine as bound intermediates. A DFT study (B3LYP) of the reaction profile allows one to characterize intermediates in the potential hypersurface. These are the initial adducts, as well as their decomposition products, the eta(1)- and eta(2)-linkage isomers of N(2)O.     

Reactions of (PCP)Ru(CO)(NHPh)(PMe3) (PCP = 2,6-(CH2PtBu2)2C6H3) with substrates that possess polar bonds

The Ru(II) amido complex (PCP)Ru(CO)(PMe(3))(NHPh) (1) (PCP = 2,6-(CH(2)P(t)Bu(2))(2)C(6)H(3)) reacts with compounds that possess polar C=N, C triple bond N, or C=O bonds (e.g., nitriles, carbodiimides, or isocyanates) to produce four-membered heterometallacycles that result from nucleophilic addition of the amido nitrogen to an unsaturated carbon of the organic substrate. Based on studies of the reaction of complex 1 with acetonitrile, the transformations are suggested to proceed by dissociation of trimethylphosphine, followed by coordination of the organic substrate and then intramolecular N-C bond formation. In the presence of ROH (R = H or Me), the fluorinated amidinate complex (PCP)Ru(CO)(N(Ph)C(C(6)F(5))NH) (6) reacts with excess pentafluorobenzonitrile to produce (PCP)Ru(CO)(F)(N(H)C(C(6)F(5))NHPh) (7). The reaction with MeOH also produces o-MeOC(6)F(4)CN (>90%) and p-MeOC(6)F(4)CN (<10%). Details of the solid-state structures of (PCP)Ru(CO)(F)(N(H)C(C(6)F(5))NHPh) (7), (PCP)Ru(CO)[PhNC{NH(hx)}N(hx)] (8), (PCP)Ru(CO){N(Ph)C(NHPh)O} (9), and (PCP)Ru(CO){OC(Ph)N(Ph)} (10) are reported.     

Density functional theory study of the oxidation of ammonia on the IrO2(110) surface

In this study, we employed density functional theory (DFT) to investigate the oxidation of ammonia (NH(3)) on the IrO(2)(110) surface. We characterized the possible reaction pathways for the dehydrogenation of NH(x) species (x = 1-3) and for the formation of the oxidation products N(2), N(2)O, NO, NO(2), and H(2)O. The presence of oxygen atoms on coordinatively unsaturated sites (O(cus)) of the oxygen-rich IrO(2)(110) surface promotes the oxidation of NH(3) on the surface. In contrast, NH(3) molecules prefer undergoing desorption over oxidation on the stoichiometric IrO(2)(110) surface. Moreover, the O(cus) atoms are also the major oxidants leading to the formation of oxidation products; none of the oxidations mediated by the bridge oxygen atoms were favorable reactions. The energy barrier for formation of H(2)O as a gaseous oxidation product on the IrO(2)(110) surface is high (from 1.83 to 2.29 eV), potentially leading to the formation of nitrogen-atom-containing products at high temperature. In addition, the selectivity toward the nitrogen-atom-containing products is dominated by the coverage of O(cus) atoms on the surface; for example, a higher coverage of O(cus) atoms results in greater production of nitrogen oxides (NO, NO(2)).