Characterization of polyolefins by comprehensive high-temperature two-dimensional liquid chromatography (HT 2D-LC)

Temperature rising elution fractionation hyphenated to size exclusion chromatography (TREF × SEC) is a routine technique to determine the chemical heterogeneity of semicrystalline olefin copolymers. A serious limitation is its applicability to non crystallizing samples. Comprehensive high temperature two-dimensional liquid chromatography (HT 2D-LC) gives an alternative to characterize the chemical heterogeneity of copolymers irrespective of their crystallizability. We have hyphenated interactive HPLC, which separates polyolefins according to their chemical composition, with high-temperature size exclusion chromatography (SEC), which distinguishes polyolefins with regard to their molar mass at 160 °C. The first separation step was based on a selective adsorption of macromolecules on a Hypercarb® column packed with porous graphite particles and subsequent desorption by a gradient 1-decanol → 1,2,4-trichlorobenzene at 160 °C. The SEC column was calibrated with polypropylene (PP) and polyethylene (PE) standards and it turned out that the injection solvent from the first dimension influenced the elution of PP in the SEC column, while the retention of PE was virtually constant. HT 2D-LC was then used to separate a broad variety of polyolefin blends containing PE, PP with different microstructure, ethylene–propylene (EP) and ethylene–propylene–diene (EP(D)M) rubber and ethylene/1-hexene copolymers. For the first time it has been shown that the elution of iPP in the gradient HPLC is molar mass dependent. The results from the HT 2D-LC separation were compared to those from TREF × SEC-experiments. The particular advantage of HT 2D-LC over TREF × SEC is the fact that HT 2D-LC is also applicable to non crystallizing polyolefin samples. The new technique therefore resolves the problem to analyze the chemical heterogeneity of non crystallizing olefin copolymers like EP and EP(D)M copolymers.     

Separation of ethylene‐propylene copolymers and ethylene‐propylene‐diene terpolymers using high‐temperature interactive liquid chromatography

Ethylene‐propylene‐diene terpolymers (EPDM) are generally amorphous and, therefore, do not crystallize from solution. Consequently, fractionation techniques based on crystallization, such as crystallization analysis fractionation or temperature rising elution fractionation, cannot be used to analyze their chemical composition distribution. Moreover, no suitable chromatographic system was known, which would enable to separate them according to their chemical composition. In this study, two different sorbent/solvent systems are tested with regard to the capability to separate EPDM‐terpolymers and ethylene‐propylene (EP)‐copolymers according to chemical composition. While porous graphite/1‐decanol system is selective towards ethylene and ethylidene‐2‐norbornene, carbon coated zirconia/2‐ethyl‐1‐hexanol is preferentially selective towards ethylene. Consequently, the earlier system enables to separate both EP copolymers and EPDM according to the chemical composition and the latter mainly according to the ethylene content. The results prove that the chromatographic separation in both sorbent/solvent systems is not influenced by molar mass of a sample or by its long chain branching. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

8-苯胺-1-萘磺酸钛配合物的合成及催化乙烯与降冰片烯共聚合反应

合成了新型催化剂8-苯胺-1-萘磺酸钛配合物, 并应用于乙烯与降冰片烯的共聚合反应中. 分别考察了助催化剂种类[甲基铝氧烷(MAO)和三乙基铝(TEA)]、 降冰片烯浓度、 Al/Ti摩尔比、 聚合温度和聚合压力对催化活性与共聚性能的影响. 通过核磁共振、示差扫描量热和凝胶渗透色谱等对所制备的共聚物进行了表征. 结果表明, 在相同条件下, 以MAO为助催化剂时, 共聚催化活性更高, 催化剂为单活性中心, 可得到分子量分布较窄(PDI≈3)的共聚产物, 其共聚反应机理为加成聚合. 另外, 随着降冰片烯浓度的升高, 共聚物中降冰片烯单元的摩尔比呈线性上升趋势, 所得共聚物的熔点随之降低.     

茂金属催化乙烯与降冰片烯共聚合研究

研究了茂金属催化体系Ｍｅ２ＳｉＣｐ２ＭＣｌ２／ＭＡＯ（Ｍ＝Ｚｒ，ｔｉ）催化乙烯与降冰片烯共聚合，考察了不同聚合条件下的共聚及乙烯动力学行为，对共聚物的结构进行了ＤＳＣ，１３Ｃ ＮＭＲ表征．研究表明，在相同的聚合条件下，Ｚｒ较Ｔｉ有更佳的共聚合催化性能．在相近的投料比条件下，得到了降冰片烯含量和Ｔｇ均较文献高的乙烯与降冰片烯的共聚物．     

Synthesis and characterization of model block-graft copolymers via anionic polymerization: Introduction of poly(isoprene) and poly(ethylene oxide) as graft chains

New architectural graft copolymers were prepared, that is, the graft chains were situated in terminal or center position of the backbone chain. These graft copolymers were termed block-graft copolymers. Two different block-graft copolymers were prepared from a “grafting onto” process and a “grafting from” process via living anionic polymerization. These backbone chains are poly(styrene), and the graft chains are poly(isoprene) and poly(ethylene oxide). The polymers were characterized by GPC measurements, osmometry, and ultracentrifugation. The block-graft copolymers formed fine microphase separation structures. It was a morphological feature that an apparent volume fraction of the graft to the backbone might be higher than the real volume fraction.     

Improved chemical composition separation of ethylene–propylene random copolymers by high-temperature solvent gradient interaction chromatography

High-temperature solvent gradient interaction chromatography (HT-SGIC) is a fast and efficient fractionation technique for the chemical composition analysis of olefin copolymers. The separation of ethylene–propylene random copolymers (EPRs) was achieved on a graphitic stationary phase, Hypercarb, at 160 °C by using linear solvent gradient elution from 1-decanol to 1,2,4-trichlorobenzene (TCB). In the present work, the solvent gradient profile was modified to improve the chromatographic separation of EPRs. With the aim to obtain a better resolution in separation, a slow increase in the volume fraction of TCB was applied. This allowed for a relatively large retention region for linear polyethylene (PE) chains on the column; thereby, a broader elution volume zone between the start of the gradient and the PE elution was achieved. The efficiency of this new gradient profile was demonstrated by analysing two fully amorphous EPR samples. Clear differences in the chemical composition of these EPR samples with similar ethylene contents have been proven by using this modified solvent gradient. The comprehensive chemical composition and microstructure analysis of the SGIC-separated fractions by FTIR revealed that ethylene/propylene (EP) copolymer chains were eluted according to their ethylene/propylene contents and E or P sequence lengths, even though they are distributed in a random manner. These results showed that the solvent composition is an important factor to affect the interactive adsorption or desorption behaviour of EP chains on Hypercarb. In this way, for the first time, the determination of the complex composition and chain structure of EPR samples was achieved within short analysis time, which is not possible till now using other fractionation techniques reported.

Crystallization Elution Fractionation and Thermal Gradient Interaction Chromatography. Techniques Comparison

Summary: The chemical composition distribution has been shown to be the most critical and discriminating parameter in understanding the performance of industrial polyolefins with non homogeneous comonomer incorporation. The chemical composition distribution is being analyzed by well known techniques such as temperature rising elution fractionation, TREF, crystallization analysis fractionation, CRYSTAF and crystallization elution fractionation, CEF. These techniques separate according to crystallizability and provide a powerful and predictable separation of components based on the presence of branches, irregularities or tacticity differences, independently of the molar mass. TREF, CRYSTAF and CEF can not be used, however, for the separation of more amorphous resins, and may not always provide the best solution for complex multi-component resins due to the existence of some co-crystallization. The application of high temperature interactive HPLC to polyolefins opened a new route to characterize these types of polymers. The use of solvent gradient HPLC for separation of polyethylene and polypropylene and the developments in HPLC on carbon based columns extended further the application of high temperature HPLC in polyolefins. A new approach has been developed recently using the carbon based column but replacing solvent gradient by a thermal gradient which facilitates the analysis of polyethylene copolymers and provides a powerful tool for the analysis of elastomers. Thermal gradient interaction chromatography (TGIC) is being compared with TREF and CEF with the analysis of model samples. The advantages/disadvantages of each technique are being investigated and discussed. The combination of TGIC and TREF/CEF provides an extended range of separation of polyolefins.     

Nickel catalysts for the addition polymerization of norbornene and its derivatives and for their copolymerization with ethylene

The addition polymerization of norbornene and its derivatives has been carried out in the presence of a nickel complex or carboxylate and an electron acceptor to obtain amorphous polymers with bicyclic units. Norbornene copolymers with conjugated dienes or ethylene cannot be obtained with these catalysts because of rapid chain transfer reactions. Norbornene can be copolymerized with ethylene under mild conditions in the presence of nickel phosphorylide chelates without using any cocatalyst. In most cases, the backbone of the resulting copolymer consists of alternating comonomer units. The new catalysts allow ethylene to be copolymerized with norbornene derivatives containing ester substituents.     

High Temperature Interaction Chromatography of Olefin Copolymers

Summary: The synthesis and characterization of polyolefins continues to be one of the most important areas for academic and industrial polymer research. One consequence of the development of new “tailor-made” polyolefins is the need for new and improved analytical techniques for the analysis of polyolefins with respect to molar mass and chemical composition distribution. The present article briefly reviews different new and relevant chromatographic techniques for polyolefin analysis. For the fast analysis of the chemical composition distribution of polyolefins a new high-temperature gradient high-performance liquid chromatography (HPLC) system has been introduced. The efficiency of this system for the separation of various olefin copolymers is demonstrated. The correlation between elution volume and chemical composition can be accessed by on-line coupling of high temperature HPLC with FTIR spectroscopy. For the elucidation of the chemical composition as a function of molar mass high-temperature size exclusion chromatography and ¹H-NMR spectroscopy can be coupled. It is shown that the on-line NMR analysis of chromatographic fractions yields information on microstructure and chemical composition in addition to molar mass distribution.     

High norbornene incorporation in ethylene-norbornene copolymerization with a bis(α-alkyloxoimine) titanium-MAO catalyst

A novel bis(α-alkyloxoimine) titanium(IV) complex was synthesized and used as a catalyst precursor to catalyze homo- and copolymerization of ethylene and norbornene. The titanium complex activated with methylalumoxane exhibits good activities for the homopolymerizations of ethylene and norbornene under high temperature to produce high-molecular-weight linear polyethylene and vinyl-type polynorbornene, respectively. Ethylene-norbornene copolymers with high molecular weight can also be produced by this catalyst. The incorporation of norbornene from 0 to 76 mol% in the copolymers can be controlled by varying the charged norbornene. ¹³C NMR analyses show that the microstructures of the ethylene-norbornene copolymers with low norbornene incorporation are predominantly alternated and isolated norbornene units, while those with high norbornene incorporation are random polymers containing long norbornene sequences.     

Thermodynamics and rheology of cycloolefin copolymers

Cycloolefin copolymers of ethylene and norbornene, with norbornene content in the range from 36 to 62 mol %, were studied with respect to the thermal, thermodynamic, and rheological properties using differential scanning calorimetry, pressure-volume-temperature, and dynamic mechanical measurements. All copolymers obey the principle of time-temperature superposition, i.e., they can be considered as thermorheologically simple except for a temperature range in the vicinity of T(g). Despite this, the results on (i) the ratio of activation energies E(V)(*)/H(*) used to quantify the origin of the liquid-to-glass transition, (ii) the pressure coefficient of the glass temperature T(g)(P), and (iii) the dynamic fragility m suggest increasing dynamic heterogeneity with increasing norbornene content that is driven by the structural heterogeneity along the backbone.     

Living copolymerization of ethylene with norbornene catalyzed by bis(pyrrolide-imine) titanium complexes with MAO

Bis(pyrrolide-imine) Ti complexes in conjunction with methylalumoxane (MAO) were found to work as efficient catalysts for the copolymerization of ethylene and norbornene to afford unique copolymers via an addition-type polymerization mechanism. The catalysts exhibited very high norbornene incorporation, superior to that obtained with Me(2)Si(Me(4)Cp)(N-tert-Bu)TiCl(2) (CGC). The sterically open and highly electrophilic nature of the catalysts is probably responsible for the excellent norbornene incorporation. The catalysts displayed a marked tendency to produce alternating copolymers, which have stereoirregular structures despite the C(2) symmetric nature of the catalysts. The norbornene/ethylene molar ratio in the polymerization medium had a profound influence on the molecular weight distribution of the resulting copolymer. At norbornene/ethylene ratios larger than ca. 1, the catalysts mediated room-temperature living copolymerization of ethylene and norbornene to form high molecular weight monodisperse copolymers (M(n) > 500,000, M(w)/M(n) < 1.20). (13)C NMR spectroscopic analysis of a copolymer, produced under conditions that gave low molecular weight, demonstrated that the copolymerization is initiated by norbornene insertion and that the catalyst mostly exists as a norbornene-last-inserted species under living conditions. Polymerization behavior coupled with DFT calculations suggested that the highly controlled living polymerization stems from the fact that the catalysts possess high affinity and high incorporation ability for norbornene as well as the characteristics of a living ethylene polymerization though under limited conditions (M(n) 225,000, M(w)/M(n) 1.15, 10-s polymerization, 25 degrees C). With the catalyst, unique block copolymers [i.e., poly(ethylene-co-norbornene)(1)-b-poly(ethylene-co-norbornene)(2), PE-b-poly(ethylene-co-norbornene)] were successfully synthesized from ethylene and norbornene. Transmission electron microscopy (TEM) indicated that the PE-b-poly(ethylene-co-norbornene) possesses high potential as a new material consisting of crystalline and amorphous segments which are chemically linked.     

Surface and bulk modification of polyolefins by functional aryl nitrenes as highly reactive intermediates

Aromatic azides with hindered amine light stabilizer (HALS) residues or hydrophilic groups such as glucose, sucrose and dextrine residues were synthesized and used for surface modification of polyolefins. By UV‐irradiation nitrenes were formed, which are able to react with polyolefin surfaces. By photochemical immobilization of the carbohydrates hydrophilicity of PE and PP was strongly increased (surface tensions > 44mN/m). Light stability of PP surfaces modified with HALS azides was comparable with PP, stabilised with Tinuvin 770. Bulk modification of ethylene‐propylene and ethylene‐octene copolymers was achieved by grafting nitrenes formed by thermal decomposition of azido benzoic acid. In a circulating air oven up to 1.55 wt% amino benzoic acid residues could be bonded covalently to ethylene‐propylene‐copolymers, less than half of it to ethylene‐octene‐copolymers. Reactive extrusion resulted in grafting yields of more than 50% for both types of copolymers.     

Permeation of water through polar and nonpolar polymers and copolymers: Determination of the concentration‐dependent diffusion coefficient

The diffusion and permeation properties of liquid water through different polar and nonpolar polymers and copolymers were studied with a highly sensitive permeameter. The transient permeation fluxes through the polar polymer films could be fitted well only with an exponential equation for the diffusivity concentration dependence; this empirical exponential equation represented the diffusion plasticization effect of water on the materials. For the hydrophobic polyolefins, this exponential equation was no longer valid, and another form of the equation was empirically found to account for the reduction of the water diffusivity with the extent of the permeation. Such a negative plasticization effect might be attributed to the formation of water clusters in the polyolefins. The values of the diffusion coefficient of water in the dry polar polymers were smaller than those in dry polyolefins, but the opposite behavior was found for the permeability because it was much more favorable for water sorption in the polar polymers than in the hydrophobic polyolefins. For the ethylene–vinylacetate copolymers, the plasticization effect of water on its own diffusion was negative for the sample with a low vinyl acetate (VA) content; it became nil at 19 wt % VA and positive at higher VA contents. This increase in the extent of the water sorption with the increase in the VA content led to a steady increase in the water permeability in the poly(ethylene‐co‐vinylacetate) copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1998–2008, 2000     

Synthesis and Characterization of Ethylene/Propylene Copolymers in the Whole Composition Range

Summary: The incorporation of comonomer molecules in the backbone of a homopolymer can influence the final properties of the material, decreasing its crystallinity and the melting and glass transition temperatures, and increasing its impact resistance and transparency. In the present work, ten ethylene/propylene copolymers have been synthesized using a supported metallocene catalytic system covering the whole composition range. Any desired composition was obtained by controlling the feed composition during the reaction. These synthesized copolymers have been characterized by different techniques in order to study the effect of the comonomer incorporation onto their final properties. When the comonomer content is low, the behaviour of the copolymer is similar to that of the corresponding homopolymer. Nevertheless, if the comonomer content increases, the copolymer becomes more amorphous (low crystallization temperature and soft XRD signals) and easily deformable, reaching a behaviour close to that corresponding to an elastomeric material. In order to corroborate these results the samples have been characterized by TREF and GPC-MALS. TREF analysis showed that copolymers containing less than 10% and more than 80% of ethylene are semicrystalline, with elution temperatures typical of this kind of polymers. Molecular weights are higher for homopolymers and they decrease as the comonomer concentration increases, whereas the polydispersity index keeps almost constant at the expected value for this kind of samples.     

Synthesis and characterization of materials prepared via the copolymerization of ethylene with 1‐octadecene and norbornene using a [(π‐cyano‐nacnac)Cp] zirconium complex

[3‐Cyano‐2‐(2,6‐diisopropylphenyl)aminopent‐2‐en‐4‐(phenylimine)tris (pentafluorophenyl)borate](η⁵‐C₅H₅)ZrCl₂, [(B(C₆F₅)₃‐ NC‐nacnac)CpZrCl₂], precatalyst ( 2 ) can be treated with low concentrations of methylaluminoxane (MAO) to generate active sites capable of copolymerizing ethylene with 1‐octadecene or norbornene under mild conditions. A series of poly(ethylene‐co‐octadecene) and poly(ethylene‐co‐norbornene) copolymers were prepared, and their properties were characterized by NMR, differential scanning calorimetry, and mechanical analysis. The results show that this system produced poly(ethylene‐co‐octadecene) copolymers with a branching content of about 8 mol %. However, upon increasing the comonomer concentration, a drastic reduction in the M_n of the product is observed concomitant with an increase in comonomer incorporation. This leads to a gradual decrease in Young's modulus and stress at break, indicating an increase in the “softness” of the copolymer. In the case of copolymerizations of ethylene and norbornene, the catalytic system ( 2 /MAO) shows a substantial decrease in reactivity in the presence of norbornene and generates copolymer chains in which 5–10 mol % norbornene is in blocks. We also observe that ethylene norbornene copolymers exhibit a high degree of alternating insertions (close to 50%), as determined by NMR spectroscopy. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Living copolymerization of ethylene with norbornene mediated by heteroligated (Salicylaldiminato)(β‐enaminoketonato)titanium catalysts

Three heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH?N(C₆F₅)][(p‐XC₆H₄)N?C(Bu^t)CHC(CF₃)O]TiCl₂ ( 3a : X = F, 3b : X = Cl, 3c : X = Br) were synthesized and investigated as the catalysts for ethylene polymerization and ethylene/norbornene copolymerization. In the presence of modified methylaluminoxane as a cocatalyst, these unsymmetric catalysts exhibited high activities toward ethylene polymerization, similar to their parallel parent catalysts. Furthermore, they also displayed favorable ability to efficiently incorporate norbornene into the polymer chains and produce high molecular weight copolymers under the mild conditions, though the copolymerization of ethylene with norbornene leads to relatively lower activities. The sterically open structure of the β‐enaminoketonato ligand is responsible for the high norbornene incorporation. The norbornene concentration in the polymerization medium had a profound influence on the molecular weight distribution of the resulting copolymer. When the norbornene concentration in the feed is higher than 0.4 mol/L, the heteroligated catalysts mediated the living copolymerization of ethylene with norbornene to form narrow molecular weight distribution copolymers (M_w/M_n < 1.20), which suggested that chain termination or transfer reaction could be efficiently suppressed via the addition of norbornene into the reaction medium. Polymer yields, catalytic activity, molecular weight, and norbornene incorporation can be controlled within a wide range by the variation of the reaction parameters such as comonomer content in the feed, reaction time, and temperature. ©2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6072–6082, 2009     

Recent developments in phase separation of polyolefin melt blends

Saturated hydrocarbon polymers may be differentiated by the relative amount and placement of methylene, methyl, methine, and quaternary carbon moieties. While it has been known or suspected for some time that polyolefins of conventional molecular weight (M_w ≈ 100 kg/mol) with dissimilar chemical microstructures are most often immiscible in the liquid state, recent experiments with binary blends of model polyolefins have increased greatly our understanding of thermodynamic interactions between unlike chains. Model systems with methyl (−CH₃) and ethyl (−C₂H₅) short-chain branches give results, expressed as the Flory-Huggins interaction parameter χ, that are nearly universal; repulsive interactions (χ > 0) are more pronounced at low temperatures, leading to liquid-liquid phase separation at an upper critical solution temperature. Phase behavior of more complex systems (with distributions of chain microstructures and/or molecular weight) is generally consistent with predictions from model systems. An interesting exception is from work at Bristol on blends of lightly branched ethylene − α-olefin copolymers with unbranched polyethylene as the minority species. Here the presence of two liquid phases is inferred under conditions not expected from model studies; effects of copolymer composition and molecular weight are also unusual. Recent theoretical work points to the importance of chain stiffness (established by short-chain branching) in determining the thermodynamics of model blends. Nonrandom mixing of chains with different stiffness gives rise to an enthalpic χ, which may be negative under certain conditions. Other limitations of the Flory-Huggins approach to describing blend energetics are considered. At present there is no theoretical basis for liquid-liquid phase separation reported by the Bristol group. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 2329–2353, 1997     

Formation and migration of zones in overloaded preparative liquid-solid chromatography

Summary An equilibrium sandwich chamber for continuous thinlayer chromatography was used to study overloaded systems of the heptane + methylene chloride-silica type. Mixtures of two or three dyes were used as the model samples. Wide starting zones were formed using a glass distributor (frontal chromatography stage), then the movement of the zones was recorded during continuous elution. The effect of sample concentration and volume on the maximum separation yield was investigated. Band compression effects are illustrated for samples dissolved in solvents having a low eluent strength. Satisfactory analogy was found to separations in preparative column chromatography. Good separation yield was obtained for frontal + elution TLC: depending on the differences in the R_F values of the components, 6–16 mg samples were completely separated on 0.5×100×75 mm layers containing ca. 1 g of silica.Presented at the Eighth International Symposium on Liquid Chromatography, Baden-Baden, 3–7 May 1983.     

Interaction of sodium dodecyl sulfate with methacrylate-PEG comb copolymers

A series of sodium methacrylate and poly(ethylene glycol) (PEG) comb copolymers (MAA/PEG) with approximate PEG chain lengths of 7, 11, and 22 ethylene oxide units were synthesized by free radical polymerization. Their weight-average molecular mass was found to be approximately 66 000. A commercial sample of a PEG comb polymer with an acrylic backbone was also used in the studies (Sokalan HP 80). The interaction of the MAA/PEG comb polymers and pure sodium methacrylate (SPMA) with sodium dodecyl sulfate (SDS) was studied by ESR spectroscopy using 5-doxyl stearic acid (5-DSA) spin probe and by conductivity measurements. Surfactant aggregation in water occurred at SDS concentrations lower than the surfactant critical micelle concentration (cmc) and depended on the polymer concentration. The observations have been attributed to changes in the effective ionic strength of the systems due to the polymer itself, and it has been concluded that there is no interaction between the MAA/PEG comb copolymers or SPMA and SDS. This has been confirmed by the fact that the decrease in surfactant aggregation concentration is similar in magnitude to the decrease observed on adding NaCl when counterion ion condensation effects are taken into account. It is apparent that the electrostatic repulsions between the surfactant molecules and the methacrylate backbone of the MAA/PEG comb copolymers inhibit association of SDS with the PEG side chains.