Effect of thermal treatment on the characteristics of electrospun PVDF−silica composite nanofibrous membrane

Composite nanofibrous membranes were prepared by the electrospinning and the thermal treatment from poly(vinylidene fluoride) (PVDF)-tetramethyl orthosilicate (TMOS) blend solutions. The average diameter of nanofibers was reduced with increasing the concentration of TMOS in the solution due to the decrease of the solution viscosity. The EDX spectra confirmed the presence of TMOS on the external surface of the composite nanofibrous membrane. The porosity of membranes was effectively enhanced by the introduction of electrospinning technique. However, the mechanical properties, thermal stability and hydrophobicity were not markedly amplified. Thus the thermal treatment of the composite membranes was carried out, leading to the enormous enhancement of the mechanical properties and hydrophobicity. In addition, XRD results revealed that the crystal structure of PVDF in the composite membranes transformed from α-phase to β-phase due to the formation of silica particles by the thermal treatment.     

Polyurethane/polystyrene‐silica electrospun nanofibrous composite for the headspace solid‐phase microextraction of chlorophenols coupled with gas chromatography

A novel electrospun composite nanofiber‐based adsorbent (polyurethane/polystyrene‐silica) was fabricated, characterized, and used in the headspace solid‐phase microextraction of the acetylated derivatives of chlorophenols in water samples before gas chromatography with micro electron capture detection. The surface morphology, chemical composition, thermal stability, and structure of the fibers were investigated by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and Brunauer–Emmett–Teller and Barrett–Joyner–Halenda techniques. The effect of the main parameters influencing the efficiency of the method including extraction temperature, salt concentration, and extraction time was investigated and the optimized conditions were obtained. The linear dynamic ranges were 0.1–800 ng/mL. The relative standard deviations (n = 3) and the limits of detection were 2.64–9.57% and 0.0234–0.830 ng/mL, respectively. The relative recoveries for real samples (river water and sewage of our university campus) were between 90.8 and 111%.     

Synthesis of catalytic filamentous carbon on a nickel/graphite catalyst and a study of the resulting carbon-carbon composite materials in microbial fuel cells

The carbon-carbon composite materials obtained via the synthesis of catalytic filamentous carbon (CFC) on a Ni/graphite supported catalyst in the process of the pyrolysis of C₃–C₄ alkanes in the presence of hydrogen were systematically studied. The effects of the following conditions on the catalytic activity expressed as the yield of carbon (g CFC)/(g Ni) and on the character of CFC synthesis on graphite rods were studied: procedures for supporting Ni(II) compounds (impregnation and homogeneous precipitation), the concentrations of impregnating compouds (nickel nitrate, urea, and ethyl alcohol) in solution, graphite treatment (oxidation) conditions before supporting Ni(II) compounds, and the pyrolysis temperature of C₃–C₄ alkanes in the range of 400–600°C. Optimum conditions for preparing CFC/graphite composite materials, which are promising for use as electrodes in microbial fuel cells (MFCs), were chosen. The electrochemical characteristics of an MFC designed with the use of a CFC/graphite electrode (anode) and Gluconobacter oxydans glycerol-oxidizing bacteria were studied. The morphology of the surfaces of graphite, synthesized CFC, and also bacterial cells adhered to the anode was studied by scanning electron microscopy.