Early (Ti,Zr)-late (Rh,Ir) heteronuclear complexes with bridging sulphido ligands

We report in this account on the controlled synthesis of novel d⁰–d⁸ early-late heteropolynuclear diolefin and carbonyl clusters. The synthetic approach was based on additive–deprotonation reactions involving the titanium and zirconium bis-hydrosulphido complexes of formula [Cp₂Ti(SH)₂] and [Cp^tt₂Zr(SH)₂] and appropriate rhodium and iridium diolefin and carbonyl compounds. The significant differences between the resulting early-late complexes and their structures coming from the titanium or zirconium metalloligand precursors are highlighted. The catalytic activity of some representative titanium–rhodium and zirconium–rhodium compounds towards alkene hydroformylation was explored. Interestingly, the heterotetranuclear ‘CpTi(μ₃-S)₃Rh₃’ structure was maintained as such under mild conditions. To cite this article: L.A. Oro et al., C. R. Chimie 6 (2003) 000–000.     

Synthesis and characterization of half-sandwich Rh, Ir complexes containing mono-thiolate-ortho-carborane ligand

Two binuclear complexes [Cp^∗M(Cl)Carb^S]₂ (Cp^∗ = η⁵-C₅Me₅, M = Rh (1a), Carb^S = SC₂(H)B₁₀H₁₀, Ir (1b)) were synthesized by the reaction of LiCarb^S with the dimeric metal complexes [Cp^∗MCl(μ-Cl)]₂ (M = Rh, Ir). Four mononuclear complexes Cp^∗M(Cl)(L)Carb^S (L = BuⁿPPh₂, M = Rh (2a), Ir (2b); L = PPh₃, M = Rh (4a), Ir (4b)) were synthesized by reactions of 1a or 1b with L (L = BuⁿPPh₂ (2); PPh₃ (4)) in moderate yields, respectively. Complexes 3a, 3b, 5a, 5b were obtained by treatment of 2a, 2b, 4a, 4b with AgPF₆ in high yields, respectively. All of these compounds were fully characterized by IR, NMR, and elemental analysis, and the crystal structures of 1a, 1b, 2a, 2b, 4a, 4b were also confirmed by X-ray crystallography. Their structures showed 3a, 3b and 5a, 5b could be expected as good candidates for heterolytic dihydrogen activation. Preliminary experiments on the dihydrogen activation driven by these half-sandwich Rh, Ir complexes were done under mild conditions.     

Coordination chemistry of Rh(III) porphyrins: complexes with hydrazine, disulfide, and diselenide bridging ligands

Rh(III) porphyrin complexes with bridging hydrazine and substituted hydrazine ligands were characterized in solution by (1)H NMR spectroscopy and in the solid state by X-ray diffraction. Addition of further ligand to these species afforded 1:1 complexes in which methylhydrazine and N,N-dimethylhydrazine preferentially bound to the Rh center through the substituted nitrogen atom, as evidenced by (1)H NMR chemical shifts. An alkylated Rh(III) porphyrin was isolated as a decomposition product of the reaction of N,N-dimethylhydrazine with Rh(III) porphyrin in the presence of light and oxygen. Me(2)Se(2) and Me(2)S(2) formed bridging and nonbridging complexes with Rh(III) porphyrin, analogous to that observed with N,N'-dimethylhydrazine.     

Mono and dinuclear complexes of half-sandwich platinum group metals (Ru, Rh and Ir) bearing a flexible pyridyl-thiazole multidentate donor ligand

The mononuclear cationic complexes [(η⁶-C₆H₆)RuCl(L)]⁺ (1), [(η⁶-p-ⁱPrC₆H₄Me)RuCl(L)]⁺ (2), [(η⁵-C₅H₅)Ru(PPh₃)(L)]⁺ (3), [(η⁵-C₅Me₅)Ru(PPh₃)(L)]⁺ (4), [(η⁵-C₅Me₅)RhCl(L)]⁺ (5), [(η⁵-C₅Me₅)IrCl(L)]⁺ (6) as well as the dinuclear dicationic complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (7), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (8), [{(η⁵-C₅H₅)Ru(PPh₃)}2(L)]²⁺ (9), [{(η⁵-C₅Me₅)Ru(PPh₃)}₂(L)]²⁺ (10), [{(η⁵-C₅Me₅)RhCl}₂(L)]²⁺ (11) and [{(η⁵-C₅Me₅)IrCl}₂(L)]²⁺ (12) have been synthesized from 4,4′-bis(2-pyridyl-4-thiazole) (L) and the corresponding complexes [(η⁶-C₆H₆)Ru(μ-Cl)Cl]₂, [(η⁶-p-ⁱPrC₆H₄Me)Ru(μ-Cl)Cl]₂, [(η⁵-C₅H₅)Ru(PPh₃)₂Cl)], [(η⁵-C₅Me₅)Ru(PPh₃)₂Cl], [(η⁵-C₅Me₅)Rh(μ-Cl)Cl]₂ and [(η⁵-C₅Me₅)Ir(μ-Cl)Cl]₂, respectively. All complexes were isolated as hexafluorophosphate salts and characterized by IR, NMR, mass spectrometry and UV-vis spectroscopy. The X-ray crystal structure analyses of [3]PF₆, [5]PF₆, [8](PF₆)₂ and [12](PF₆)₂ reveal a typical piano-stool geometry around the metal centers with a five-membered metallo-cycle in which 4,4′-bis(2-pyridyl-4-thiazole) acts as a N,N′-chelating ligand.     

Synthesis and reactivity of homo-bimetallic Rh and Ir complexes containing a N,O-donor Schiff base

Binuclear complexes [{(η⁵-C₅Me₅)RhCl}₂(μ-bsh)] (1) and [{(η⁵-C₅Me₅)IrCl}₂(μ-bsh)] (2) containing N,N′-bis(salicylidine)hydrazine (H₂bsh) are reported. The complexes 1 and 2 reacted with EPh₃ (E = P, As) to afford cationic complexes [(η⁵-C₅Me₅)Rh(PPh₃)(κ²-Hbsh)]PF₆ (3), [(η⁵-C₅Me₅)Rh(AsPh₃)(κ²-Hbsh)]PF₆ (4), [(η⁵-C₅Me₅)Ir(PPh₃)(κ²-Hbsh)]PF₆ (5), and [(η⁵-C₅Me₅)Ir(AsPh₃)(κ²-Hbsh)]PF₆ (6) which were isolated as their hexafluorophosphate salts. Representative complexes 3 and 5 have been used as a metallo-ligand in the synthesis of binuclear complexes [(η⁵-C₅Me₅)RhCl(μ-bsh)Ru(η⁶-C₁₀H₁₄)Cl]PF₆ (7) and [(η⁵-C₅Me₅)IrCl(μ-bsh)Ru(η⁶-C₁₀H₁₄)Cl]PF₆ (8). The complexes under study have been fully characterized by analytical and spectral (FAB/ESI-MS, IR, NMR, electronic and emission) studies. Molecular structures of 1, 2, 3 and 5 have been determined crystallographically. Structural studies on 1 and 2 revealed the presence of extensive inter- and intra-molecular C-H···O and C-H···π weak bonding interactions. The complexes 1, 2, 3 and 5 moderately emit upon excitation at their respective MLCT bands.     

The vinylation of aryl iodides catalysed by Co, Rh and Ir complexes

The CoCl(PPh₃)₃, RhCl(PPh₃)₃, and IrClCO(PPh₃)₂ catalysed vinylation of aryl iodides proceeds to give cinnamates and stilbene in high yields.     

Half-sandwich Ru(II), Ir(III) and Rh(III) complexes with bridging or chelating N-heterocyclic bis-carbene ligand: Synthesis and characterization

N-heterocyclic bis-carbene ligand (bis-NHC) which was derived from 1,1′-diisopropyl-3,3′-ethylenediimidazolium dibromide (L·2HBr) via silver carbene transfer method, reacted with [(η⁶-p-cymene)RuCl₂]₂ and [Cp^∗MCl₂]₂ (Cp^∗ = η⁵-C₅Me_5, M = Ir, Rh) respectively, afforded complexes [(η⁶-p-cymene)RuCl₂]₂(L) (1), [Cp^∗IrCl₂]₂(L) (2) and [Cp^∗RhCl(L)][Cp^∗RhCl₃] (3). When [Cp^∗IrCl₂]₂ was treated with 2 equiv AgOTf at first, and then reacted with bis-NHC ligand, [Cp^∗IrCl(L)]OTf (4) was obtained. The molecular structures of complexes 1-4 were determined by X-ray single crystal analysis, showing that 1 and 2 adopted bridging coordination mode, 3 and 4 adopted chelating coordination mode. All of these complexes were characterized by ¹H, ¹³C NMR spectroscopy and element analysis.     

Air- and water-stable catalysts for hydroamination/cyclization. Synthesis and application of CCC-NHC pincer complexes of Rh and Ir

The scope of CCC-NHC pincer complex synthetic methodology by metalation/transmetalation has been extended to Ir. Structural characterization revealed that it is isomorphous with the Rh complex. Both Rh and Ir complexes are efficient catalysts for the hydroamination/cyclization of secondary amines in the presence of air and/or water.     

银、铑、铱与2-巯基苯并噻唑的配合物的高压液相色谱研究

研究了银、铑、铱与2 巯基苯并噻唑的配合物的高压液相色谱(HPLC)行为,试验了多种固定相和流动相对金属配合物的分离情况,并对某些色谱理论问题进行了探讨。给出了银、铑、铱的同时快速分离及测定条件,Ag、Rh、Ir的检出限均为50ng。4次进样的相对标准偏差分别为Ag:1.9%,Rh:1.0%,Ir:1.2%。     

Synthesis and structural studies of arene ruthenium and Cp*Rh/Cp*Ir complexes containing pyridylpyrazole- and pyridylthiazole-based ligands

The reactions of [(arene)RuCl₂]₂ (arene = p-cymene or benzene) and [Cp*MCl₂]₂ (M = Rh or Ir) with N,N′-bidentate chelating ligands 2-[3-(2-pyridyl)pyrazolyl]pyrimidine (L1) and 4-phenyl-(2-pyridyl)thiazole (L2) leads to the formation of mononuclear complexes of general formula [(arene)/Cp*M(L)Cl]PF₆. Eight such complexes have been prepared and characterized by spectroscopic techniques. In addition, five of the complexes were also characterized by single-crystal X-ray diffraction. These complexes have typical piano-stool geometries around the metal center, with five-membered metellacycles in which L1 and L2 both act as N,N′-chelating ligands. Moreover, L1 prefers to coordinate through its pyrimidine and pyrazolyl nitrogen atoms, rather than the pyridine nitrogen.     

The bridging function of an apparently nonbridging ligand: dinuclear rhodium complexes with Rh(mu-SbR3)Rh as a molecular unit

Novel dinuclear rhodium complexes of the general composition [Rh2Cl2(mu-CRR')2(mu-SbiPr3)] (4-6) were prepared by thermolysis of the mononuclear precursors trans-[RhCl(=CRR')(SbiPr3)2] in excellent yield. The X-ray crystal structure analysis of 4 (R = R' = Ph) confirms the symmetrical bridging position of the stibane ligand. Related compounds [Rh2Cl2(mu-CPh2)(mu-CRR')(mu-SbiPr3)] (7, 8) with two different carbene units were obtained either from trans-[RhCl(=CPh2)(SbiPr3)2] (1) and RR'CN2 or by a conproportionation of 4 and 5 (R = R' = p-Tol) or 4 and 6 (R= Ph, R' = p-Tol), respectively. While CO reacts with 4 to give the polymeric product [[RhCl(CPh2)(CO)]n] (9), tert-butyl isocyanide replaces the bridging stibane and yields [Rh2Cl2(mu-CPh2)2(mu-CNtBu)] (10). The reaction of 4 with tertiary phosphanes PR3 leads to complete bridge cleavage and affords the mononuclear compounds trans-[RhCl(=CPh2)(PR3)2] (11-15). In contrast, treatment of 4 with SbMe3 and SbEt3 yields the related triply bridged complexes [Rh2Cl2(mu-CPh2)2(mu-SbR3)] (16, 17) by substitution of SbiPr3 for the smaller stibanes. The displacement of the chloro ligands in 4-6 and 10 by n5-cyclopentadienyl gives the dinuclear complexes [(n5-C5H5)2Rh2(mu-CRR')2] (18-20) and [(n5-C5H5)2Rh2(mu-CPh2)2(mu-CNtBu)] (21), of which 18 (R = R' = Ph) was characterized crystallographically.     

Interaction of a bulky N-heterocyclic carbene ligand with Rh(I) and Ir(I). Double C-H activation and isolation of bare 14-electron Rh(III) and Ir(III) complexes

Reactivity and structural studies of unusual rhodium and iridium systems bearing two N-heterocyclic carbene (NHC) ligands are presented. These systems are capable of intramolecular C-H bond activation and lead to coordinatively unsaturated 16-electron complexes. The resulting complexes can be further unsaturated by simple halide abstraction, leading to 14-electron species bearing an all-carbon environment. Saturation of the vacant sites in the 16- and 14-electron complexes with carbon monoxide permits a structural comparison. DFT calculations show that these electrophilic metal centers are stabilized by pi-donation of the NHC ligands.     

Synthesis, structure and reactivity of homobimetallic Rh(I) and Ir(I) complexes of s- and as-indacene-diide

The Rh(COD) and Ir(COD) homobimetallic complexes of s-indacene-diide, 2,6-dimethyl-s-indacene-diide, as-indacene-diide, and 2,7-dimethyl-as-indacene-diide have been synthesized from the di-lithium salts of the dianions and metal dimers [M(μ-Cl)L₂]₂ (M = Rh, Ir; L₂ = COD, NBD, (ethylene)₂, (CO)₂ as mixtures of syn and anti isomers. The syn/anti ratio depends on the nature of the ancillary ligands at the metal and on the s or as geometry of the bridging ligand. In the reaction of the 2,7-dimethyl-as-indacene-diide-[M(COD)]₂ species with CO, the higher reactivity of the syn isomers has been justified on the basis of a greater instability of the ground state due to steric interactions between the COD groups. Bis-η¹ metal-bonded intermediates have been identified in the carbonylation of iridium derivatives; on the other hand, the formation of the bis-η⁵ mixed complexes syn and anti-{2,7-dimethyl-as-indacene-diide-[Rh(COD)][Rh(CO)₂]} and their reactivity strongly support the existence of metal---metal interaction in the rhodium derivatives.     

Binuclear schiff-base complexes of copper(II) linked by phthaloyl as a bridging group

Binuclear Schiff-base complexes were prepared by bridging an unsymmetrical tetradentate Schiff-base complex of copper(II) with m- or p-phthaloyl. The complexes were characterized by means of elemental analyses, molecular weights, UV, IR and ¹H NMR (for metal-free ligands) spectra. ESR and magnetic susceptibility measurements show that the copper(II)copper(II) interaction is negligibly small.     

Synthesis and properties of Rh(I) and Ir(I) distibine complexes with organometallic co-ligands

The first series of Rh(I) distibine complexes with organometallic co-ligands is described, including the five-coordinate [Rh(cod)(distibine)Cl], the 16-electron planar cations [Rh(cod)(distibine)]BF4 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 and the five-coordinate [Rh(CO)(distibine)2][Rh(CO)2Cl2] (distibine=R2Sb(CH2)3SbR2, R=Ph or Me, and o-C6H4(CH2SbMe2)2). The corresponding Ir(I) species [Ir(cod)(distibine)]BF4 and [Ir{Ph2Sb(CH2)3SbPh2}2]BF4 have also been prepared. The complexes have been characterised by 1H and 13C{1H} NMR and IR spectroscopy, electrospray mass spectrometry and microanalysis. The crystal structure of the anion exchanged [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF(6).3/4CH2Cl2 is also described. The methyl-substituted distibine complexes are less stable than the complexes of Ph2Sb(CH2)3SbPh2, with C-Sb fission occurring in some of the complexes of the former. The salts [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF6 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 undergo oxidative addition with Br2 to give the known [RhBr2{Ph2Sb(CH2)3SbPh2}2]+, while using HCl gives the same hydride complex from both precursors, which is tentatively assigned as [RhHCl2{Ph2Sb(CH2)3SbPh2}]. An unexpected further Rh(III) product from this reaction, trans-[RhCl2{Ph2Sb(CH2)3SbPh2}{PhClSb(CH2)3SbClPh}]Cl, was identified by a crystal structure analysis and represents the first structurally characterised example of a chlorostibine coordinated to a metal. [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 reacts with CO to give [Rh(CO){Ph2Sb(CH2)3SbPh2}2]BF4 initially, and upon further exposure this species undergoes further reversible carbonylation to give a cis-dicarbonyl species thought to be [Rh(CO)2{Ph2Sb(CH2)3SbPh2}{kappa1Sb-Ph2Sb(CH2)3SbPh2}]BF4 which converts back to the monocarbonyl complex when the CO atmosphere is replaced with N2.     

Reactions of palladium germylene complexes: formation of sulfide bridges

Reactivity of three novel Pd germylene species is presented. (Et(3)P)(2)PdGe[N(SiMe(3))(2)](2) (1) and (dppe)PdGe[N(SiMe(3))(2)](2) (6) react with COS to give the sulfide bridged species (Et3P)2Pd(mu S)Ge[N(SiMe3)2]2 (2) and (dppe)Pd(mu S)Ge-[N(SiMe3)2]2 (7) (dppe = (diphenylphosphino)ethane). (Ph(3)P)(2)PdGe[N(SiMe(3))(2)](2) (4) reacts with COS to give the disulfide bridged complex (Ph(3)P)(2)Pd(muS)(2)Ge[N(SiMe(3))(2)](2) (5) resulting in Pd-Ge bond cleavage. This phosphine dependent reactivity is explored. Crystal structures of 2, 5, 7, and the dimeric form of complex 2, (8), are reported. In the presence of excess germylene, complexes 2 and 5 are shown to partially regenerate their parent palladium germylene complexes, 1 and 4, respectively, via photolysis or heating.     

Straightforward synthesis of phosphametallocenium cations of Rh and Ir

Reaction of 3,4-dimethylphospholylthallium (Tl-1) with [Cp^∗MCl₂]₂ (M = Rh, Ir) leads to the formation of the dimeric species [(Cp^∗M)₂(Me₂C₄H₂P)₃]⁺2 and 3 with bridging μ-η¹:η¹-phospholyl ligands. The phosphametallocenium sandwich complexes [Cp^∗M(Me₂C₄(SiMe₃)₂P)]⁺7 (M = Rh) and 8 (M = Ir) could be obtained from the reaction of [Cp^∗MCl₂]₂ and the 2,5-bis(trimethylsilyl)-1-trimethylstannylphosphole 6, with the bulky trimethylsilyl groups preventing the phosphole from η¹- and enforcing a η⁵-coordination. The structures of phospharhodocenium cation 7 and a byproduct 9 containing a phosphairidocenium moiety could be determined by X-ray diffraction.