Novel crown-containing porphyrin and its complexes with transition metals

The novel crown-containing porphyrin 5-{4-[(4-hydroxybenzo-15-crown-5)-5-yldiazo]phenyl}-10,15,20-triphenylporphyrin (H₃L) and its transition metal complexes MHL (M = Co(II), Ni(II), Cu(II), and Zn(II)) and AgH₂L were obtained. The compositions and structures of all the compounds were studied by MALDI-TOF mass spectroscopy, electronic absorption and IR spectroscopy. The diamagnetic compounds were additionally characterized by ¹H NMR spectroscopy. It was proved that Co(II), Ni(II), Cu(II), and Zn(II) are coordinated through the pyrrole N atoms, while Ag(I) is coordinated through the hydroxyl O atom and the diazo N atom of H₃L.     

Liquid-liquid extraction of metal ions with tris (2,6-dimethoxyphenyl) phosphine and its quaternary phosphonium salts

The extraction of various metal ions from hydrochloric acid solutions with tris(2,6-dimethoxyphenyl)phosphine, [2,6-(MeO)₂C₆H₃]₃P, abbreviated to (2,6-MeOPh)₃P, and its tertiary and quaternary phosphonium salts were studied. A series of phosphonium salts, [(2,6-MeOPh)₃PH]⁺ClO^?₄, [(2,6-MeOPh)₃PR]⁺Br^? and {[(2,6-MeOPh)₃P]₂R′}²⁺ (Br^?)₂, where R = C₁₂H₂₅, C₁₈H₃₇ or C₆H₅CH₂ and R′ = p-CH₂C₆H₄CH₂, (CH₂)₃ and (CH₂)₁₀, were synthesized and applied to an anion exchanger for chloro complex anions of various metal ions. (2,6-MeOPh)₃P and [(2,6-MeOPh)₃PR]⁺Br^? were found to be effective for the extraction of metal ions such as iron(III), gold(III) and gallium(III), forming tetrachloro complex anions of the M^IIICl^?₄ type. The extractabilities of the doubly charged cationic quaternary phosphonium salts [{(2,6-MeOPh)₃P}₂R′]²⁺ (Br^?₂, were found to be superior to those of the singly charged cationic phosphonium salts for metal ions such as cadmium(II), platinum(II) and palladium(II), forming a tetrachloro complex doubly charged aion of the M^IICl^2?₄ type. Most of the metal ions are extracted through ion-pair formation between their chloro complex anions and the phosphonium cations.     

OXYGEN COMPLEX FORMATION BY COBALT(II)-TRIS (2-AMINOETHYL) AMINE+

Abstract

The reversible oxygenation of the Co(II) complex of tris(2-aminoethyl)amine (TREN, L) has been studied in some detail. The equilibrium constant K _O2 =10^26.92 M^?2 atm^?1, corresponding to the quotient [H⁺] [L₂Co₂(O₂) (OH)³⁺]/[Co²⁺]² [L]² P_O2 was determined by potentiometric equilibrium measurements of hydrogen ion concentration. Values for the thermodynamic constants, ΔH° =–63 ± 9 kcal/mole and ΔS° =–100 ± 15 cal/deg. mol, were calculated from the temperature dependence of the equilibrium constant. Oxygen stoichiometry, measured with a polarographic sensor, indicated the formation of a binuclear (peroxo bridged) complex, and the potentiometric equilibrium data indicated the presence of a second, μ-hydroxo, bridge. Measurement of the kinetics of the fast reaction between the cobalt(II)-TREN complex and dioxygen gave the value of the second order rate constant for the formation of the dioxygen complex as k ₁ =2.8 × 10⁺³ sec^?1 mol^?1. The first order rate constant for the decomposition of the dioxygen complex measured by stopped-flow was found to be k _?2 =0.7 sec^?1. Kinetic and equilibrium data are discussed with respect to the probable structure and mechanism of formation of the dioxygen complex, and are compared with similar data previously reported for analogous complexes. The oxygen complex reported is unique with respect to its extremely slow rate of conversion to inert cobalt(III) complexes.     

Complexing Polymer Films in The Preparation of Modified Electrodes for Detection of Metal Ions

Summary: The complexing properties of poly (3-(pyrrol-1-yl)propylmalonic acid) (poly1) and poly(N,N′-ethylenebis[N-[(3-(pyrrole-1-yl)propyl) carbamoyl) methyl]-glycine (poly2) coated electrodes (C|poly1 and C|poly2) towards Cu(II), Pb(II), Hg(II) and Cd(II) cations using the open circuit chemical preconcentration-anodic stripping technique were studied. Sorption process of metal cations onto complexing surfaces was readily investigated through the combination of a chemical pre-concentration-anodic stripping technique with a Langmuir isotherm model. The modified electrodes were used for the voltammetric determination of Cu(II), Pb(II), Hg(II) and Cd(II) ions, giving low detection limits for Cu(II) (5 × 10⁻⁹ mol L⁻¹) and Pb(II) (5 × 10⁻¹⁰ mol L⁻¹). The ability of the modified electrodes to analyze Cu(II) ions in natural sample has been demonstrated by the analysis of a tap water sample. The results of the preconcentration process under competitive conditions clearly shows that the selectivity of complexing molecular electrode materials can be subtly tuned upon playing on the accumulation time, polymer thickness and/or memory effect of the binding polymers, opening up new avenues towards evolutive and efficient smart sensing materials.     

Reduction of copper (II) chloride by molybdenum and rhenium biscyclopentadienyl hydrides. Investigation of the crystal and molecular structure of [(η5-C5H5)2Re]+[CuCl2]−

The reduction of copper (II) chloride by molybdenum and rhenium biscyclopentadienyl hydrides upon their interaction in donor-type solvents has been studied by NMR, X-ray diffraction, and magnetic methods. It is established that the ionic complex [(η⁵-C₅H₅)₂Re]⁺[CuCl₂]^? forms ortho rhombic crystals with a - 13.696(2) Å, b = 7.317(1) Å, c = 5.969(1) Å, space group Pm2₁n, Z = 2. The cyclopentadienyl rings make a bent-sandwich with an angle between the ring centres and Re atom of 150.1°; the ClCuCl angle being 174.8° and the ReCu minimum distance 4.346(29) Å. The solution of [(η⁵-C⁵H₅)²Re]⁺ [CuCl₂]^? seems to activate the CH bond of the C₅H₅ rings, which results in the addition of the [(C₅H₅)(C₅H₄)ReH]⁺ hydride ion.     

8-hydroxyquinoline based neutral tripodal ionophore as a copper (II) selective electrode and the effect of remote substitutents on electrode properties

New PVC membrane ion selective electrodes based on 1,3,5-Tris(8-quinolinoxymethyl)-2,4,6-trimethylbenzene (MO8HQ) are reported. The basic sensing material belongs to the group of tripodal ionophores. Also their derivatives prepared by placing suitable substitutents at fifth position of 8-oxine moiety, i.e, 1,3,5-Tris(5-chloro-8-quinolinoxymethyl)-2,4,6-trimethylbenzene (5CHQ), 1,3,5-Tris(5-benzoyl-8-quinolinoxymethyl)-2,4,6-trimethylbenzene (5BHQ) and 1,3,5-Tris[(5-phenylhydroxymethylene)-8-quinolinoxymethyl]-2,4,6-trimethylbenzene (HYD-8HQ) ionophores have also been used to make copper-selective membrane electrodes. Among all the four electrodes, MO8HQ and HYD-8HQ ionophores based electrodes show excellent response towards Cu (II) ions. The electrodes having composition 33% PVC, 4% MO8HQ and 63% dibutyl phthalate (DBP) and 33% PVC, 6% HYD-8HQ, 63% dibutyl phthalate (DBP) exhibit a good Nernstian response to Cu (II) ions in the range of 1.0 × 10⁻⁶ to 1 × 10⁻¹ M. The electrode shows a reasonably fast response time of 15 s. The effect of pH and electrode response is also reported. It shows good selectivity for Cu (II) ions in comparison to heavy metal ions, transition metal ions and for alkali and alkaline earth metal ions. The electrode response and selectivity remains unchanged for at least 5 months. The electrode can be used as an indicator electrode in the potentiometric titration of Cu (II) ions with EDTA.     

Enhanced performance of field-effect transistors based on C<Subscript>60</Subscript> single crystals with conjugated polyelectrolyte

Contact resistance at the interface between metal electrodes and semiconductors can significantly limit the performance of organic field-effect transistors, leading to a distinct voltage drop at the interface. Here, we demonstrate enhanced performance of n-channel field-effect transistors based on solution-grown C₆₀ single-crystalline ribbons by introducing an interlayer of a conjugated polyelectrolyte (CPE) composed of poly[(9,9-bis(3′-((N,N-dimethyl)-N-ethylammonium)-propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] dibromide (PFN⁺Br^?). The PFN⁺Br^? interlayer greatly improves the charge injection. Consequently, the electron mobility is promoted up to 5.60 cm² V^?1 s^?1 and the threshold voltage decreased dramatically with the minimum of 4.90 V.     

Fabrication of Bismuth/Multi-walled Carbon Nanotube Composite Modified Glassy Carbon Electrode for Determination of Cobalt

A bismuth/multi‐walled carbon nanotube (Bi/MWNT) composite modified electrode for determination of cobalt by differential pulse adsorptive cathodic stripping voltammetry is described. The electrode is fabricated by potentiostatic pre‐plating bismuth film on an MWNT modified glassy carbon (GC) electrode. The Bi/MWNT composite modified electrode exhibits enhanced sensitivity for cobalt detection as compared with the bare GC, MWNT modified and bismuth film electrodes. Numerous key experimental parameters have been examined for optimum analytical performance of the proposed electrode. With an adsorptive accumulation of the Co(II)‐dimethylglyoxime complex at ?0.8 V for 200 s, the reduction peak current is proportional to the concentration of cobalt in the range of 4.0×10^?10?1.0×10^?7 mol/L with a lower detection limit of 8.1×10^?11 mol/L. The proposed method has been applied successfully to cobalt determination in seawater and lake water samples.     

Simultaneous Voltammetric Determination of Zn(II), Pb(II), Cu(II), and Hg(II) in Ethanol Fuel Using an Organofunctionalized Modified Graphite‐Polyurethane Composite Disposable Screen‐Printed Device

A disposable screen‐printed device containing working, auxiliary, and reference electrodes is proposed for the simultaneous voltammetric determination of Zn(II), Pb(II), Cu(II), and Hg(II) in ethanol fuel. The working electrode was printed using an ink modified with 2‐benzothiazole‐2‐thiol organofunctionalized SBA‐15 silica, in order to increase sensitivity. The performance of this electrode was compared with that of bare and SBA‐15‐modified electrodes. After optimizing the experimental parameters, the device was applied in determination of the analytes in commercial ethanol fuel samples, using 0.10 mol L^?1 KCl/ethanol ratios of 30 : 70 (v/v), with [H⁺]=10^?5 mol L^?1. After 5 min of preconcentration at ? 1.3 V (vs. pseudo‐Ag/AgCl), four well‐resolved signals were obtained, enabling simultaneous determination of the four analytes using a differential pulse anodic stripping voltammetry (DPASV) procedure. The limits of detection were 0.30, 0.065, 0.030, and 0.046 µmol L^?1 for Zn(II), Pb(II), Cu(II), and Hg(II), respectively. The results of these analyses were in agreement with those obtained using graphite furnace atomic absorption spectroscopy (GFAAS) for Pb(II), Cu(II), and Hg(II), and high‐resolution continuum source flame atomic absorption spectrometry (HR‐CS‐FAAS) for Zn²⁺, at a 95 % confidence level. Analytes originally present in the samples could be detected, and the interference of some cations and anions was evaluated.     

Rogiolenyne A,B, and C: The First Branched Marine C15 Acetogenins. Isolation from the Red Seaweed Laurencia microcladia or the Sponge Spongia zimocca of II Rogiolo

It is shown here that the red seaweed Laurencia microcladia, collected off the torrent II Rogiolo, south of Livorno, contains rogiolenyne A (= (?)-(1R*,2S*,3R*,5S*,7S*)-2-(bromomethyl)-5-[(Z)-1-chlorohex-3-en-5-ynyl]-3-ethyl-4,8-dioxabicyclo[5.1.0]octane; (?)- 1 ) while the sponge Spongia zimocca, which grows in the same small area, contains rogiolenyne B (= (?)-(2R*3R*,4R*,5R*,7S*)-3-(bromomethyl)-5-chloro-7-[(Z)-1-chlorohex-3-en-5-ynyl]-2-ethyloxepan-4-ol; (?)- 4a ) and its acetate, rogiolenyne C((?)- 4b ). These structures, which are based on extensive NMR and MS data and on chemical transformation, are the first examples of branched marine C₁₅ acetogenins. Biogenesis of (?)- 1 in L. microcladia is thought to involve C(12) extrusion form a C₁₅ linear tetraen-1-yne precursor via H⁺-induced cyclopropane ring closure, followed by Br⁺-induced cyclopropane ring opening, aided by C–O^? attack (Scheme 2). It is also proposed that transfer of (?)- 1 to S. zimocca is followed by epoxide ring opening by Cl^? to give (?)- 4a and acetylation to give (?)- 4b .     

Highly Thiocyanate‐Selective PVC Membrane Electrode Based on Lipophilic Ferrocene Derivative

A novel anion‐selective PVC membrane electrode based on bis‐[(3‐ferrocenyl)‐(2‐crotonic acid)] copper(II) complex [Cu(II)‐BFCA] as neutral carrier is described, which demonstrates excellent potentiometric response characteristics toward thiocyanate ion and anti‐Hofmeister selectivity sequence in following order: SCN^?>I^?>ClO >Sal^?>Br^?>NO >Cl^?≈NO >SO >SO . The electrode shows a near‐Nernstian response for thiocyanate ion in a wide range of 9.0×10^?7–1.0×10^?1 M with a detection limit 6.8×10^?7 M and a slope of ?59.1 mV/decade in pH 5.0 of phosphate buffer solution at 20 °C. The influences of lipophilic cationic and anionic additives on the response properties of the electrode were investigated. High sensitivity and wide linear dynamic range were observed for the electrode in the presence of hexadecyltrimethylammoniumborate (HTAB) as a lipophilic cationic additive. The electrode was successfully applied to the determination of thiocyanate ion in waste water and human saliva.     

Sensitive Anodic Stripping Voltammetric Copper Ions Determination Performed in Double Deposition and Double Stripping Steps System for Real Water Samples Analysis

The article reports on utilization of double deposition and stripping steps for increasing sensitivity of Cu(II) determination by anodic stripping voltammetry (ASV) at two lead film working electrodes. A significant preconcentration of copper was achieved thanks to utilization of a simple design of four electrodes system that gives possibility to perform one measurement cycle consisting of two deposition and two stripping steps. Due to the fact that deposition step is doubled, the concentration of Pb(II) needed to lead film electrodes formation was significantly reduced as compared to traditional procedures using three electrodes system. The analytical procedure of Cu(II) determination was optimized. The experimental factors: supporting electrolyte's pH and its concentration, lead ions concentration, potential and time of deposition at both working electrodes were studied. The Cu(II) peak current was linearly dependent on its concentration from 5×10^?10 to 2×10^?8 mol L^?1 (deposition time of 270 and 160 s at the first and the second working electrode, respectively). The obtained detection limit for copper ions determination was 2.1×10^?10 mol L^?1. The described procedure was validated by analysis of two water certified reference materials. The described procedure was also utilized for real water sample analysis.     

Sequential flow-injection determination of cyanide and weak metal—cyanide complexes with flow-through heterogeneous membrane electrodes

Free cyanide and cyanide present in weak complexes are determined by using two flow- through silver iodide/silver sulphide electrodes with an intervening gas diffusion unit. Under optimal conditions, the linear range is 10^?5?10^?3 mol dm^?3 cyanide, and the relative standard deviations are ca. 2%, with a sampling rate of 20 h^?1. Total cyanide can be determined in the presence of Zn(II), Cu(II) and Cd(II) but results are low with Ni(II), Co(II) or Fe(III) present. Sulphide and thiocyanate must be absent.     

新型卟啉衍生物的合成、结构表征和电化学性质的研究

以合成的[5-(4-溴苯基)-10,15,20-三苯基卟啉]锌为底物,通Stille偶联的方法合成5-(4’-氨基-4-联苯基)-10,15,20-三苯基卟啉,[5-(4’-氨基-4-联苯基)-10,15,20-三苯基卟啉]锌配合物以及[5- (4’-甲硫基-4-联苯基)-10,15,20-三苯基卟啉]锌配合物。并用Uv,‘H NMR, IR, Ms, Fs等表征确证了该系列配合物的结构,并用循环伏安法对以上部分产物进行了电化学性质的研究.     

Synthesis and Structural Features of a New Diselenonium Dication Stabilized by Sulfur Atoms of Thiourea Groups: X‐ray Characterization of [(Se‐ettu)2]Br2 (ettu = ethylenethiourea)

Selenium and bromine were refluxed in methanol and stirred with ethylenethiourea to give yellow crystals of [(Se‐ettu)₂]Br₂ (ettu = ethylenethiourea). The first reported 1,2‐diselenonium dication stabilized by sulfur atoms is air unstable and yields a three‐dimensional lattice with Se⁺···Br^?···Se⁺ bridges enclosing also single Se⁺···Br^? interactions and H···Br^? bonds. The air instability of [(Se‐ettu)₂]Br₂ probably is due to redox reactions which lead to the decomposition of ethylenethiourea with precipitation of sulfur.     

Copper(II) complexes of thiosemicarbazones derived from 2-acetylpyridine and its n-oxide

A series of Cu(II) complexes of the thiosemicarbazone, 3-azabicyclo[3.2.2]-nonene-3-thiocarboxylic acid 2-[1-(2-pyridinyl)ethylidene]hydrazide(HL) and the corresponding N-oxide (HLO) have been prepared and characterized. Both ligands undergo deprotonation and appear to coordinate via the thione sulfur, the imine nitrogen and the pyridyl nitrogen (or N-oxide oxygen). A single anionic ligand such as Cl^?, Br^?, NCS^? and N^?₃ completes the bonding to the Cu(II) center of these 4-coordinate complexes. When the complexes are prepared using Cu(II) perchlorate, the solids isolated contain a neutral thiosemicarbazone ligand as well as the deprotonated ligand. The solids are primarily characterized by IR, electronic and electron spin resonance spectroscopy. In addition, electronic and ESR spectra of their chloroform solutions were recorded. Most of the solids (except the nitrates) were unaltered upon dissolution. Simulation of the solution ESR spectra was used to estimate the coupling constants of the various coordinated nuclei.     

Synergistic extraction of cobalt(II) with oxine/decanoic acid solution mixtures in benzene and chloroform

Synergistic extraction of Co(II) with 8-hydroxyquinoline (Hq)/decanoic acid [(HR)₂] solution mixtures in benzene and chloroform was carried out at 25°C. The aqueous ionic strength and the total concentration of cobalt(II) were 0.1 (NaCl) and 1·10^–5–1·10^–3M, respectively. The synergistic effect is interpreted by the formation of the mixed ligand ion-pair complexes: [(Coq(Hq)₂(HR))⁺, R^–] and [(Coq(Hq)₂(HR)₃)⁺, R^–] in benzene and chloroform, respectively.     

DC Electrical Conductivity of Three-Branched Dendritic and Linear Metal Complexes of N-Substituted Imidazole Phenanthroline Derivatives

N-substituted imidazole phenanthroline dendritic metal complexes of 2-(4-(4,5-diphenyl-2,5-1H-imidazol-2-yl)phenyl)-1H-imidazo[4,5-f][1,10]-phenanthroline, N-phenyl substituted phenylene imidazole derivative (TIPIP) and N,N-dimethyl phenylene imidazole derivative (MIPIP), were synthesized and characterized. DC electrical conductivity behavior vs. temperature in the range 300–500 K of the prepared three-branched metal (II) complexes of Co, Ni, Cu, Zn, Cd, and Hg was studied. Of the entire dendritic metal complexes, Cu(II) complexes showed the best electrical conductivity in the range 10^?7–10^?12 Scm^?1; a semiconductor behavior. For comparison, the linear Cu(II) complexes of TIPIP and MIPIP were synthesized and their electrical conductivity behavior was studied. Linear and dendritic Cu(II) complexes showed consistent DC electrical conductivity behavior. N,N-dimethyl substituted phenylene imidazole (MIPIP) Cu(II) dendritic and linear complexes showed the highest electrical conductivity values which reached 10^?7 Scm^?1 at high temperatures. The synthesized materials were characterized using CHN analyses, FTIR, UV-visible, ¹H-NMR, and thermal analyses (TGA, DTA).     

Preparation and spectroscopic characterization of iron(II) and copper(II) complexes of a functionalized crown ether

Condensation between 4′-aminobenzo-15-crown-5- and 4-antipyrinecarboxaldehyde yielded the functionalized crown ether (L = 1,5-dimethyl-4-[(2,3,5,6,8,9,11,12-octahydro-1,4,7,10,13-benzopentaoxacyclopentadecin-15-ylimino)methyl]-2-phenyl-1,2-dihydro-3H-pyrazol-3-one). A 1:1 (Na⁺:L) complex has been prepared. The reaction of Fe(II) and Cu(II) salts with L gave complexes of composition [Fe(L)Cl₂] and [Cu(L)₂Cl₂]. Heteronuclear complexes [Fe(L)Cl₂Na]ClO₄ and [Cu(L)₂Cl₂Na]ClO₄ have also been synthesized from the reactions of [Fe(L)Cl₂] and [Cu(L)₂Cl₂] with NaClO₄. The compounds have been characterized by microanalyses and spectroscopic methods.