Structure and Magnetism of Pr1−xSrxFeO3−δ

Crystal structure, redox, and magnetic properties for the Pr_1−xSr_xFeO_3−δ solid-solution phase have been studied. Oxidized samples (prepared in air at 900°C) crystallize in the GdFeO₃-type structure for 0≤x≤0.80, and probably in the Sr₈Fe₈O₂₃-type (unpublished) structure for x=0.90. Reduced samples (containing virtually only Fe³⁺) crystallize as the perovskite aristotype for x=0.50 and 0.67 with randomly distributed vacancies. The Fe⁴⁺ content increases linearly in the oxidized samples up to x≈0.70, whereupon it stabilizes at around 55%. Antiferromagnetic ordering of the G type is observed for oxidized samples (0≤x≤0.90) which show decreasing Néel temperature and ordered magnetic moment with increasing x, while the Néel temperature is nearly constant at 700 K for reduced samples. Electronic transitions for iron from an average-valence state via charge-separated to disproportionated states are proposed from anomalies in magnetic susceptibility curves in the temperature ranges 500–600 K and 150–185 K.     

Critical covalence and superconductivity in Ln2−xCexCuO4

The variations of superconductive properties with x of the n-type Ln_2−xCe_xCuO₄ (Ln = La_0.5Nd_0.5, Nd, or Gd) systems have been investigated. As the size of Ln³⁺ decreases, (i) the solubility limit x of Ce decreases, (ii) the value of x at which a transition from antiferromagnetic semiconductor to superconductor occurs increases, and (iii) the width Δx of the superconductive region decreases. The decreasing solubility of Ce with decreasing size of Ln³⁺ is due to decreasing tensile strain in the CuO₂ sheets. The progressive shift of the semiconductor to superconductor transition to higher x values with decreasing size of Ln³⁺ is explained on the basis of increasing electrostatic Madelung energy E_M caused by decreasing Cu---O bond length. A larger E_M means a larger charge transfer gap Δ and a smaller covalent-mixing parameter λ and bandwidth W; so a decreasing size of Ln³⁺ necessitates a higher level of Ce-doping in order to achieve a critical covalence essential for superconductivity to occur.     

Single crystal growth of Bi1−xSrxMnO3—Thermodynamics and experiment

The primary crystallization field of a perovskite solid solution Bi_1−xSr_xMnO_3−δ was delimited by calculating the respective phase equilibria in the quaternary Bi–Sr–Mn–O system. The calculations are based on the recent assessment involving all three ternary subsystems, a quaternary liquid approximated as a mixture of Mn, MnO, Mn₂O₃, SrO and Bi₂O₃ species with binary Redlich–Kister coefficients and the perovskite phase described in terms of a point defect model allowing Sr²⁺ for Bi³⁺ substitution, oxygen vacancy formation and the related Mn³⁺/Mn⁴⁺ mixing on Mn-sublattice. The crystallization path and the composition of the crystallized solid solution are compared with single crystal growth experiments performed by self-flux method from a Bi-rich melt. The crystallization path obtained for a selected feed composition for which the largest and high quality single crystal have been grown, turns out to end very close to the global eutectic point.     

Properties of the perovskites, SrMn1−xFexO3−δ (x=1/3, 1/2, 2/3)

The SrMn_1−xFe_xO_3−δ (x=1/3, 1/2, 2/3) phases have been prepared and are shown by powder X-ray and neutron (for x=1/2) diffraction to adopt an ideal cubic perovskite structure with a disordered distribution of transition-metal cations over the six-coordinate B-site. Due to synthesis in air, the phases are oxygen deficient and formally contain both Fe³⁺ and Fe⁴⁺. Magnetic susceptibility data show an antiferromagnetic transition at 180 and 140 K for x=1/3 and 1/2, respectively and a spin-glass transition at 5, 25, 45 K for x=1/3, 1/2 and 2/3, respectively. The magnetic properties are explained in terms of super-exchange interactions between Mn⁴⁺, Fe^(4+δ)+ and Fe⁽³⁺⁾⁺. The XAS results for the Mn-sites in these compounds indicate small Mn-valence changes, however, the Mn-pre-edge spectra indicate increased localization of the Mn-e_g orbitals with Fe substitution. The Mössbauer results show the distinct two-site Fe⁽³⁺⁾+/Fe^(4+δ)+ disproportionation in the Mn- substituted materials with strong covalency effects at both sites. This disproportionation is a very concrete reflection of a localization of the Fe-d states due to the Mn-substitution.     

Pillaring of Layered Perovskites, K1−xLaxCa2−xNb3O10, with Nanosized Fe2O3 Particles

Nanosized Fe₂O₃ clusters are pillared in the interlayer spaces of layered perovskites, H_1−xLa_xCa_2−xNb₃O₁₀ (0≤x≤0.75) by a guest-exchange reaction using the trinuclear acetato-hydroxo iron cation, [Fe₃(OCOCH₃)₇ OH·2H₂O]⁺. The interlayer spaces of niobate layers are pre-expanded with n-butylammonium cations (n-C₄H₉NH⁺₃), which are subsequently replaced by bulky iron pillaring species to form Fe(III) complex intercalated layer niobates. Upon heating at 380°C, the interlayered acetato-hydroxo iron complexes are converted into Fe₂O₃ nanoclusters with a thickness of ca. 3.5 Å irrespective of the interlayer charge density (x). The band-gap energy of the Fe₂O₃ pillars (E_g2.25 eV) is slightly larger than that of bulk Fe₂O₃ (E_g2.20 eV) but is smaller than that expected for such a small-sized semiconductor, which can be assigned to the pancake-shaped Fe₂O₃ pillars of 3.5 Å in height with comparatively large lateral dimension. X-ray absorption spectroscopic measurements at the Fe K-edge are carried out in order to obtain structural information on the Fe₂O₃ pillars stabilized between the niobate layers. XANES analysis reveals that the interlayer FeO₆ octahedra have coordination environments similar to that of bulk α-Fe₂O₃, but noncentrosymmetric distortion of interlayered FeO₆ is enhanced due to the asymmetric electric potential exerted by the negatively charged niobate layers. Scanning electron microscopic observation and nitrogen adsorption–desorption isotherm measurement suggest that the pillared derivatives are nanoporous materials with the highest BET specific surface area of ca. 116 m²/g.     

A study of the perovskite solid solution series LaxSr1−xRuO3 and LaxCa1−xRuO3 by ruthenium-99 Mössbauer spectroscopy

The magnetic, electronic, and structural properties of the solid solutions La_xSr_1−xRuO₃ and La_xCa_1−xRuO₃ have been studied by ⁹⁹Ru Mössbauer spectroscopy and other techniques. The La_xCa_1−xRuO₃ phases are reported for the first time and have been shown by powder X-ray diffraction measurements to be orthorhombically distorted perovskites. Electrical resistivity measurements on compacted powders show that all the phases are metallic with p 10⁻³, ohm-cm. Progressive substitution of Sr²⁺ by La³⁺ in ferromagnetic SrRuO₃ leads to a rapid collapse of the magnetic hyper-fine splitting at 4.2°K. For x = 0.25 some ruthenium ions still experience a magnetic field but for 0.4 x 0.75 only single, narrow resonance lines are observed, consistent both with the complete removal of the ferromagnetism and with the presence of an averaged ruthenium oxidation state in each phase, i.e., La_x³⁺Sr_1−x²⁺Ru^(4−x)+O₃ rather than La_x³⁺Sr_1−x²⁺Ru_x³⁺Ru_1−x⁴⁺O₃. LaRuO₃ and CaRuO₃ both give essentially single-line spectra at 4.2°K, indicating that the ruthenium ions in these oxides are not involved in long-range antiferromagnetic order but are paramagnetic. The solid solutions La_xCa_1−xRuO₃ (0 < x 0.6) give sharp symmetrical singlets with chemical isomer shifts (relative to the Ru metal) which move progressively from the value characteristic of Ru⁴⁺ (−0.303 mm sec⁻¹) toward the value for Ru³⁺ (−0.557 mm sec⁻¹), consistent with the presence of intermediate ruthenium oxidation states in these phases also.     

The structure Tl3SbS3, Tl3SbSe3, Tl3SbS3−xSex, and Tl3SbyAs1−ySe3

The space group symmetry and crystal structure of Tl₃SbS_3−xSe_x compounds in the composition range 0 < x < 3 have been determined by a combination of powder X-ray diffraction, electron diffraction, and high-resolution electron microscopy. The incongruently melting compound Tl₃SbSe₃ has been shown to crystallize in cubic space group P2₁3 with a = 9.435Å in a structure related to that of Langbeinite. The convergent beam electron diffraction pattern of Tl₃SbS₃ is in accord with the space group R3m determined by X-ray diffraction. The cubic Langbeinite-type structure is found for Tl₃SbS_3−xSe_x for 0.5 < x < 3 and for Tl₃Sb_yAs_1−ySe₃ for 0.077 < y < 1.0. A five-component compound Tl₃Sb_0.5As_0.5Se_1.5S_1.5 was also found to be cubic.     

Excess properties of the (Ln2−2xCaxThx)(PO4)2 (Ln = La, Ce) solid solutions

X-ray powder diffraction at room temperature and drop calorimetry at T = 1005 K were performed on LnPO₄–CaTh(PO₄)₂ (Ln = La, Ce) solid solutions. The results show excess molar volume and excess enthalpy indicating deviations from ideal behaviour that have been interpreted in terms of lattice strains resulting from the ion size effects of substitution of the Ln³⁺ with (Ca²⁺ + Th⁴⁺).     

Synthesis and low temperature fluorination of the alkaline-earth palladates Ba2−xSrxPdO3 (x = 0–2)

Since the discovery of superconductivity in Sr₂CuO₂F_2+δ there has been an increased interest in ternary oxide-fluorides. Sr₂CuO₂F_2+δ is prepared via low temperature (T = 220 °C) reaction routes. Low temperature fluorination induces an interesting structural rearrangement in the parent compound Sr₂CuO₃, which is a one-dimensional material containing linear chains of vertex sharing CuO₄ squares along the crystallographic b axis. Upon fluorination, one oxide is substituted by two fluorides and Cu²⁺ becomes octahedrally coordinated by four oxides and two fluorides. The fluorinated compound Sr₂CuO₂F_2+δ displays the T-type structure (La₂CuO₄). Insertion of excess fluorine, δ, also takes place and this fluorine occupies interstitial sites in the T structure. Although the starting material Ca₂CuO₃ is isostructural to Sr₂CuO₃, Ca₂CuO₂F_2+δ displays the T′ (Nd₂CuO₄) structure due to the smaller radius of Ca²⁺ compared to that of Sr²⁺.

The alkaline-earth palladates with the general formula A₂PdO₃ (A = Ba, Sr) are isostructural with the A₂CuO₃(A = Ca, Sr) materials. We prepared the Ba_2−xSr_xPdO₃ (x = 0–2) series and performed low temperature fluorination, which led to the synthesis of the series Ba_2−xSr_xPdO₂F_2+δ (0 ≤ x ≤ 1.5). All the compounds in the Ba_2−xSr_xPdO₂F_2+δ series show T′ structure (Ca₂CuO₂F_2+δ). Similarities and differences with Sr₂CuO₂F_2+δ and Ca₂CuO₂F_2+δ will be discussed.     

Tl2Ba2−xSrxCuO6: A system exhibiting a compositionally controlled superconductor-metal transition

Strontium-substituted thallium cuprates of the type Tl₂Ba_2−xSr_xCuO₆ have been synthesized for various values of x. Single phases were obtained for x ≤ 1.2. The compounds crystallize in the tetragonal structure with space group I4/mmm as the parent Tl₂Ba₂CuO₆ oxide. Both a and c lattice parameter decrease with increase in x. T_c decreases gradually from 92 to 77 K (x = 0.8). Beyond x = 1.0 superconductivity is lost. The x = 1.2 comparison is metallic down to 4.2 K.     

La1-xSrxCoO3(x=0,0.2,0.4,0.6,0.8)钙钛矿型氧化物的催化性能及改性

通过溶胶-凝胶法制备出A位Sr掺杂的钙钛矿型氧化物La_(1-x)Sr_xCoO_3(x=0,0.2,0.4,0.6,0.8),并将其作为催化剂应用于双功能氧电极中。测试结果表明,A位Sr的掺杂的La_(1-x)Sr_xCoO_3比LaCoO_3具有更高的电催化活性,并且La_(0.6)Sr_(0.4)CoO_3在氧还原和氧析出反应中均表现出最优的催化性能,最大电流密度分别达到0.244 A·cm~(-2)(-0.6 V vs Hg/HgO)和0.303 A·cm~(-2)(1 V vs Hg/HgO)。为进一步提高催化剂的催化活性,将水热法制备的α-MnO_2纳米管与La_(0.6)Sr_(0.4)CoO_3复合作为双功能催化剂。当α-MnO_2的质量分数为40%时,比起单一的α-MnO_2或钙钛矿氧化物,α-MnO_2/La_(0.6)Sr_(0.4)CoO_3复合材料表现出协同效应,有更好的双功能电催化活性,使双效氧电极具有更好的电化学性能及稳定性。     

Sodium “stuffed” Ba2−xSrxFe4O8 ferrites: new cationic conductors

Sodium insertion in the tetrahedral layer structure of the ferrites Ba_2−xSr_xFe₄O₈ was performed by solid state reaction at 1220 K in air. Superstoichiometric oxides with the actual formula (Ba_2−xSr_x)_1−y/4Na_yFe₄O₈—y0.56; 0.60Ba/Sr1.67—were characterized by X-ray and neutron powder diffraction. The hexagonal unit-cell volume shows an increasing dependence on the sodium insertion when the Ba/Sr ratio reaches the largest values. The marked expansion of the c parameter is the likely signature of the location of the inserted sodium cations within the interlayer space. One-half of the sodium cations partly sits on the Sr(Ba) sites in octahedral coordination and the other half occupies extra octahedral and tetrahedral sites. ac conductivity measurements point to a cationic conductivity whose thermally activated regime—E_a 0.7 eV—evidenced from 570 K, is unsensitive to the sodium content. The bottleneck of the 2D sodium mobility regards the crossing of the oxygen triangular faces shared by the different polyhedra within the interlayer space.     

La1-xSrxCoO3（x=0，0.2，0.4，0.6，0.8）钙钛矿型氧化物的催化性能及改性

通过溶胶-凝胶法制备出A位Sr掺杂的钙钛矿型氧化物La_1-xSr_xCoO₃（x=0,0.2,0.4,0.6,0.8）,并将其作为催化剂应用于双功能氧电极中。测试结果表明,A位Sr的掺杂的La_1-xSr_xCoO₃比LaCoO₃具有更高的电催化活性,并且La_0.6Sr_0.4CoO₃在氧还原和氧析出反应中均表现出最优的催化性能,最大电流密度分别达到0.244 A·cm^-2（-0.6 V vs Hg/HgO）和0.303 A·cm^-2（1 V vs Hg/HgO）。为进一步提高催化剂的催化活性,将水热法制备的α-MnO₂纳米管与La_0.6Sr_0.4CoO₃复合作为双功能催化剂。当α-MnO₂的质量分数为40%时,比起单一的α-MnO₂或钙钛矿氧化物,α-MnO₂/La_0.6Sr_0.4CoO₃复合材料表现出协同效应,有更好的双功能电催化活性,使双效氧电极具有更好的电化学性能及稳定性。     

Synthesis and X-ray crystal structures of [Ru4H4(CO) 11(PPh3)] and [Ru4−x IrxH2−x(CO) 12(PPh3) ] (x = 0 or 1)

Three tetranuclear clusters [Ru₄H₄(CO)₁₁(PPh₃)] (1), [Ru₄H₂(CO)₁₂(PPh₃)] (2) and [Ru₃IrH(CO)₁₂(PPh₃)] (3) were formed in the reaction of [Ir(CO)Cl(PPh₃)₂] and Na[Ru₃H(CO)₁₁] in tetrahydrofuran. Complexes 1–3 were characterized by IR and ¹H and ³¹P NMR, and the structure of the clusters was confirmed by single crystal X-ray analysis. In 2 and 3 one of the carbonyls bridges between two ruthenium atoms; otherwise the compounds contain only terminal carbonyls.     

Transport Properties of Bi2−xInxSe3 Single Crystals

The paper reports on the temperature dependence of the electrical and thermal conductivity, Hall constant, and Seebeck coefficient of Bi_2−xIn_xSe₃ (x=0, 0.2, 0.4) single crystals measured over the temperature range from 2 to 300 K. One single-valley conduction band model is used to interpret relations among transport coefficients. The data analysis relies on the use of a mixed carrier scattering mechanism consisting of acoustic scattering and scattering on ionized impurities. The effect of In incorporation into the Bi₂Se₃ crystal lattice on the individual components of thermal conductivity is evaluated and discussed.     

Thermal analysis and thermal expansion studies on high density YBa2−xLaxCu3O7−δ, 0x0.2

The compositions in the YBa_2−xLa_xCu₃O_7−δ (0x0.2) system were prepared by the solid state reaction, employing a novel high-temperature oxygen sintering route. The modified sintering route yields dense slab like microstructures with large grains. The decomposition (incongruent melting) temperature of the YBa₂Cu₃O_7−δ (Y-123) phase was found to shift to higher temperatures with increasing oxygen partial pressure and lanthanum content. Structure remained orthorhombic up to x=0.2 with a decrease in the orthorhombic strain ((b−a)/b). Iodometric titration indicated a systematic increase in the oxygen content with increasing lanthanum content. Thermo-gravimetric studies in various oxygen partial pressures revealed that the oxygen diffusion in to the YBa₂Cu₃O_7−δ (δ>0.5) lattice is an exothermic event and takes place at temperatures not less than 573 K. High-temperature thermal-expansion measurements in air indicated that the nonlinearity in thermal expansion behaviour was reduced by the substitution of lanthanum.     

Analysis of structural and magnetic phase transition behaviors of La1−xSrxCrO3 by measurement of heat capacity with thermal relaxation technique

The heat capacity, C_p, of the La_1−xSr_xCrO₃ system and its temperature dependence have been measured by a thermal relaxation technique. Both structural and magnetic phase transitions were detected at temperatures that can be surmised from the phase diagram proposed in previous studies. The observed variation in enthalpy after the first-order structural phase transition, ΔH, showed agreement with those measured by differential scanning calorimetry (DSC). A decrease in the variation in C_p in the second-order magnetic phase transition, ΔC_p, with an increase in Sr content was detected, which can be attributed to a decrease in electronic spin configuration entropy with an increase in Sr content. In the dependence of ΔC_p on Sr content, a bending point was also observed at x  0.12, at which the crystal system varies from an orthorhombic-distorted perovskite structure to a rhombohedral-distorted perovskite structure.     

Theoretical studies on the BN substituted fullerenes C70−2x(BN)x (x=1–3)—isoelectronic equivalents of C70

The equilibrium structures and relative stabilities of BN-doped fullerenes C_70−2x(BN)_x (x=1–3) have been studied at the AM1 and MNDO level. The most stable isomers of C_70−2x(BN)_x have been found out and their electronic properties have been predicted. The calculation results show that the BN substituted fullerenes C_70−2x(BN)_x have considerable stabilities, though they are less stable than their all carbon analog. For C₆₈BN, the isomers whose BN is located in the most chemically active bonds of C₇₀ (namely B and A) are among the most stable species, of which B is predicted to be the ground state. The stabilities of C₆₈BN decrease and the dipole moments increase with increasing the distance between the heteroatoms. For C₆₆(BN)₂, the lowest energy species is the isomer in which the B–N–B–N bond is formed; For C₆₄(BN)₃, the most stable species should have three BN units located in the same hexagon to form B–N–B–N–B–N ring. The ionization potentials and the affinity energies of the most stable species of BN-doped C₇₀ are almost the same as those of C₇₀ because of the isoelectronic relationship. The ionization potentials and affinity energies depend on the relative position of the heteroatoms in C₆₈BN, the chemical reactivities of the isomers whose heteroatoms are well separated should differ significantly from their all carbon analog.     

The metastable Ni7±xS6, and mixed Ni6±x(S1−ySey)5, phases

The closely related, narrowly non-stoichiometric, metastable as well as thermodynamically stable “phases” in the metal-rich part of the Ni–S phase diagram near the nominal composition Ni_7±xS₆ have been carefully re-investigated via electron diffraction and transmission electron microscope imaging. Two quite distinct polymorphs have been identified, a minority incommensurate interface-modulated polymorph and a (heavily twinned) majority I1a1, a=2a_p, b=2b_p, c=−a_p+c_p superstructure (of an underlying Bmmb, a_p3.3, b_p16.4, c_p11.3 Å parent structure) polymorph. The incommensurate polymorph is shown to be very closely related to the only known polymorph of Ni_6±xSe₅ and is rapidly stabilized to room temperature upon doping of the sulfide compounds with selenium.     

Synthesis, Crystal Structure, and Magnetic Properties of Quasi-One-Dimensional Oxides Ca3CuMnO6 and Ca3Co1+xMn1−xO6

Synthesis conditions, crystal structures, and magnetic properties of quasi-one-dimensional complex oxides Ca₃CuMnO₆ (space group P-1, z=4, triclinic cell) and Ca₃Co_1+xMn_1−xO₆ with x=0, 0.25, 1.0 (structural type K₄CdCl₆, space group R-3c, z=6) are presented. The crystal structures of Ca₃CoMnO₆ and Ca₃CuMnO₆ were refined using neutron and combined X-ray and neutron diffraction analysis, respectively. The interatomic distances in oxygen polyhedra were found. In contrast to ferromagnetic Ca₃Co₂O₆ (T_c=24 K), manganese-containing phases Ca₃Co_1+xMn_1−xO₆ are characterized by antiferromagnetic interactions with Neel temperatures 18 K (x=0.25) and 13 K (x=0). For Ca₃CuMnO₆T_N was established to be 6 K.