Viscous flow over a shrinking sheet with an arbitrary surface velocity

In this paper, an analytical solution in a closed form for the boundary layer flow over a shrinking sheet is presented when arbitrary velocity distributions are applied on the shrinking sheet. The solutions with seven typical velocity profiles are derived based on a general closed form expression. Such flow is usually not self-similar and the solution can only be implemented when the mass transfer at the wall is prescribed and determined by the moving velocity of the wall. The characteristics of the flows with the typical velocity distributions are discussed and compared with previous similarity solutions. The flow is observed to have quite different behavior from that of the self-similar flow reported in the literature and the results demonstrate distinctive momentum and energy transport characteristics. Some plots of the stream functions are also illustrated to show the difference in flow field between the shrinking sheet and the stretching sheet. An integral approach to solve boundary layer flow over a shrinking or stretching sheet with uncoupled arbitrary surface velocity and wall mass transfer velocity is outlined and the effectiveness of this approach is discussed.     

Closed-form exact solutions of MHD viscous flow over a shrinking sheet

In this paper, the magnetohydrodynamic (MHD) flow over a shrinking sheet is solved analytically. The solution is given in a closed-form equation and is an exact solution of the full governing Navier–Stokes equations for the problem. Interesting solution behavior is observed with multiple solution branches for certain parameter domain.     

A new family of unsteady boundary layers over a stretching surface

In this paper, a new family of unsteady boundary layers over a stretching flat surface was proposed and studied. This new class of unsteady boundary layers involves the flows over a constant speed stretching surface from a slot, and the slot is moving at a certain speed. Depending on the slot moving parameter, the flow can be treated as a stretching sheet problem or a shrinking sheet problem. Both the momentum and thermal boundary layers were studied. Under special conditions, the solutions reduce to the unsteady Rayleigh problem and the steady Sakiadis stretching sheet problem. Solutions only exist for a certain range of the slot moving parameter, α. Two solutions are found for −53.55° < α < −45°. There are also two solution branches for the thermal boundary layers at any given Prandtl number in this range. Compared with the upper solution branch, the lower solution branch leads to simultaneous reduction in wall drag and heat transfer rate. The results also show that the motion of the slot greatly affects the wall drag and heat transfer characteristics near the wall and the temperature and velocity distributions in the fluids.     

DTM-BF方法和可渗透收缩壁面上带滑移速度的非稳态磁流体力学流动

研究了运动的粘性导电流体中可渗透收缩壁面上非稳态磁流体边界层流动,利用解析和数值方法对问题进行了研究,并考虑了壁面速度滑移的影响．提出了一个新的解析方法（DTM-BF）,并将其应用于求解带有无穷远边界条件的非线性控制方程的近似解析解．对所有的解析结果和数值结果进行了对比,结果显示两者非常吻合,从而证明了DTM-BF方法的有效性．另外,对不同的参数,得到了控制方程双解和单解的存在范围．最后,分别讨论了滑移参数、非稳态参数、磁场参数、抽吸/喷注参数和速度比例参数对壁面摩擦、唯一解速度分布和双解速度分布的影响．     

Asymptotic Expansion of Crocco Solution and the Blasius Constant

We consider the Crocco equation (the reduction of the Blasius equation). The use of this more simple equation for computation of the Blasius constant leads to some unexpected difficulties, which have been unexplained. We computed the asymptotic expansion of the solution to Crocco equation at its singularity. This expansion was unknown before. We describe the structure of the Riemann surface of the Crocco solution at the singularity. These results were used for construction of an effective numerical algorithm, which is based on analytical continuation, for computation of the Blasius constant with an arbitrary and guaranteed accuracy. We computed the Blasius constant with a 100 decimal places.     

On a perturbation treatment of a model for MHD viscous flow

We discuss the solution of a nonlinear ordinary differential equation that appears in a model for MHD viscous flow caused by a shrinking sheet. We propose an accurate numerical solution and derive simple analytical expressions. Our results suggest that a recent perturbation treatment of the same problem exhibits a pathological behaviour and conjecture its probable cause.     

Heat transfer of a generalized stretching/shrinking wall problem with convective boundary conditions

In this paper, we investigate the heat transfer of a viscous fluid flow over a stretching/shrinking sheet with a convective boundary condition. Based on the exact solutions of the momentum equations, which are valid for the whole Navier–Stokes equations, the energy equation ignoring viscous dissipation is solved exactly and the effects of the mass transfer parameter, the Prandtl number, and the wall stretching/shrinking parameter on the temperature profiles and wall heat flux are presented and discussed. The solution is given as an incomplete Gamma function. It is found the convective boundary conditions results in temperature slip at the wall and this temperature slip is greatly affected by the mass transfer parameter, the Prandtl number, and the wall stretching/shrinking parameters. The temperature profiles in the fluid are also quite different from the prescribed wall temperature cases.     

Viscous flow over a shrinking sheet with a second order slip flow model

In this paper, viscous flow over a shrinking sheet is solved analytically using a newly proposed second order slip flow model. The closed solution is an exact solution of the full governing Navier–Stokes equations. The solution has two branches in a certain range of the parameters. The effects of the two slip parameters and the mass suction parameter on the velocity distribution are presented graphically and discussed. For certain combinations of the slip parameters, the wall drag force can decrease with the increase of mass suction. These results clearly show that the second order slip flow model is necessary to predict the flow characteristics accurately.     

Slip MHD viscous flow over a stretching sheet – An exact solution

In this paper, the magnetohydrodynamic (MHD) flow under slip condition over a permeable stretching surface is solved analytically. The solution is given in a closed form equation and is an exact solution of the full governing Navier–Stokes equations. The effects of the slip, the magnetic, and the mass transfer parameters are discussed. Results show that there is only one physical solution for any combination of the slip, the magnetic, and the mass transfer parameters. The velocity and shear stress profiles are greatly influenced by these parameters.     

Flow,heat, and species transfer over a stretching plate considering coupled Stefan blowing effects from species transfer

In this paper, we investigate the flow, heat and mass transfer of a viscous fluid flow over a stretching sheet by including the blowing effects of mass transfer under high flux conditions. Mass transfer in this work means species transfer and is different from mass transpiration for permeable walls. The new contribution from this work is, for the first time, to consider the coupled blowing effects from massive species transfer on flow, heat, and species transfer for a stretching plate. Based on the exact solutions of the momentum equations, which are valid for the whole Navier–Stokes equations, the energy and mass transfer equations are solved exactly and the effects of the blowing parameter, the Schmidt number, and the Prandtl number on the flow, heat and mass transfer are presented and discussed. The solution is given in terms of an incomplete Gamma function. It is found the coupled blowing effects due to mass transfer can have significant influences on velocity profiles, drag, heat flux, as well as temperature and concentration profiles. These solutions provide rare results with closed form analytical expressions and can be used as benchmark problem for numerical code validation.     

An analytical approximation for solving nonlinear Blasius equation by NHPM

In this article, an analytic approximation to the solution of Blasius equation is obtained by using a new modification of homotopy perturbation method. The Blasius equation is a nonlinear ordinary differential equation which arises in the boundary layer flow. The comparison with Howart's numerical solution shows that the new homotopy perturbation method is an effective mathematical method with high accuracy. © 2009 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 2010     

Simple non-perturbative solution for MHD viscous flow due to a shrinking sheet

The magnetohydrodynamic (MHD) viscous flow due to a shrinking sheet is examined analytically. The series solution is obtained using the Adomian decomposition method (ADM) coupled with Padé approximants to handle the condition at infinity. The numerical solutions agree very well with the results by the homotopy analysis method.     

Solution of a laminar boundary layer flow via a numerical method

In this paper, the numerical solution of the Blasius problem is obtained using the collocation method based on rational Chebyshev functions. The Blasius equation is a nonlinear ordinary differential equation which arises in the boundary layer flow. The method reduces solving the equation to solving a system of nonlinear algebraic equations. The results presented here demonstrate reliability and efficiency of the method.     

Surface wave scattering by a rectangular impedance cylinder located on a reactive plane

The electromagnetic scattering of the surface wave by a rectangular impedance cylinder located on an infinite reactive plane is considered for the case that the impedances of the horizontal and vertical sides of the cylinder can have different values. Firstly, the diffraction problem is reduced into a modified Wiener–Hopf equation of the third kind and then solved approximately. The solution contains branch‐cut integrals and two infinite sets of constants satisfying two infinite systems of linear algebraic equations. The approximate analytical or numerical evaluations of corresponding integrals and numerical solution of the linear algebraic equation systems are obtained for various values of parameters such as the surface reactance of the plane, the vertical and horizontal wall impedances, the width and the height of the cylinder. Copyright © 2004 John Wiley & Sons, Ltd.     

Heat transfer in MHD viscoelastic boundary layer flow over a stretching sheet with non-uniform heat source/sink

This paper presents the study of momentum and heat transfer characteristics in a hydromagnetic flow of viscoelastic liquid over a stretching sheet with non-uniform heat source, where the flow is generated due to a linear stretching of the sheet and influenced by uniform magnetic field applied vertically. Here an analysis has been carried out to study the effect of magnetic field on the visco-elastic liquid flow and heat transfer over a stretching sheet with non-uniform heat source. The non-linear boundary layer equation for momentum is converted into ordinary differential equation by means of similarity transformation and is solved exactly. Heat transfer differential equation is also solved analytically. The effect of magnetic field on velocity, skin friction and temperature profiles are presented graphically and discussed.     

An Analytic Approach for Calculating Absolutely Unstable Inviscid Modes of the Boundary Layer on a Rotating Disk

An analytical treatment of inviscidly absolutely unstable modes is pursued using the long-wavelength asymptotic approach. It is shown using the inviscid Rayleigh scalings in conjunction with the linear critical layer theory that the rotating-disk boundary layer flow undergoes a region of absolute instability for some small azimuthal wave numbers. The analytically calculated branch points for the absolute instability are found to be in good agreement with those obtained via a numerical solution of the inviscid Rayleigh equation.     

A process of axisymmetric unlimited shock-free compression of a perfect gas

Using Sidorov's ideas and analytical methods for solving the problem of the shock-free compression of a gas acted upon by a piston, a new parameterc form of the solution of the equation for the self-similar velocity potential of a gas is proposed. This enables the problem of constructing the flow with an unlimited increase in the gas-dynamic parameters to be reduced to solving the Cauchy problem for a single ordinary differential equation with a bounded integration interval. The solution of the gas-dynamic equations thus obtained may be of interest in constructing the process of unlimited compression of a perfect gas, at rest at the initial instant of time inside a solid of revolution of the “plate” type, and its describes the gas flow in a certain part of the compressed volume. Asymptotic estimates of the gas-dynamic quantities are established analytically.     

Application of homotopy analysis method for natural convection of Darcian fluid about a vertical full cone embedded in pours media prescribed surface heat flux

In this paper, a powerful analytical method, called homotopy analysis method (HAM) is used to obtain the analytical solution for a nonlinear ordinary deferential equation that often appear in boundary layers problems arising in heat and mass transfer which these kinds of the equations contain infinity boundary condition. The boundary layer approximations of fluid flow and heat transfer of vertical full cone embedded in porous media give us the similarity solution for full cone subjected to surface heat flux boundary conditions. Nonlinear ODE which is obtained by similarity solution has been solved through homotopy analysis method (HAM). The main objective is to propose alternative methods of solution, which do not require small parameters and avoid linearization and physically unrealistic assumptions. The obtained analytical solution in comparison with the numerical ones represents a remarkable accuracy. The results also indicate that HAM can provide us with a convenient way to control and adjust the convergence region.     

Heat transfer in MHD viscoelastic fluid flow over a stretching sheet with variable thermal conductivity,non-uniform heat source and radiation

An analysis has been carried out to study the magnetohydrodynamic boundary layer flow and heat transfer characteristics of a non-Newtonian viscoelastic fluid over a flat sheet with a linear velocity in the presence of thermal radiation and non-uniform heat source. The thermal conductivity is assumed to vary as a linear function of temperature. The basic equations governing the flow and heat transfer are in the form of partial differential equations, the same have been reduced to a set of non-linear ordinary differential equations by applying suitable similarity transformation. The transformed equations are solved analytically by regular perturbation method. Numerical solution of the problem is also obtained by the efficient shooting method, which agrees well with the analytical solution. The effects of various physical parameters such as viscoelastic parameter, Chandrasekhar number, Prandtl number, variable thermal conductivity parameter, Eckert number, thermal radiation parameter and non-uniform heat source/sink parameters which determine the temperature profiles are shown in several plots and the heat transfer coefficient is tabulated for a range of values of said parameters. Some important findings reported in this work reveals that combined effect of variable thermal conductivity, radiation and non-uniform heat source have significant impact in controlling the rate of heat transfer in the boundary layer region.     

对流扩散方程的QC3无网格法

对流扩散方程作为偏微分运动方程的分支,在流体力学、气体动力学等领域有着重要应用.为解决对流扩散方程难以通过解析法得到解析解的难题,采用二阶一致3点积分(Quadratically Consistent 3-Point Integration,简称QC3)提高无网格法的计算效率,通过对积分点上形函数导数的修正,改善无网格...