Effect of Streamwise Streaky Structures on Turbulization of a Circular Jet

Experimental investigations of the influence of streamwise streaky structures on turbulization of a circular laminar jet are described. The qualitative characteristics of jet evolution are studied by smoke visualization of the flow pattern in the jet and by filming the transverse and longitudinal sections of the jet illuminated by the laser sheet with image stroboscopy. It is shown that the streaky structures can be generated directly at the nozzle exit, and their interaction with the Kelvin–Helmholtz ring vortices leads to emergence of azimuthal beams ( structures) by a mechanism similar to threedimensional distortion of the twodimensional Tollmien–Schlichting wave at the nonlinear stage of the classical transition in nearwall flows. The effect of the jetexhaustion velocity and acoustic action on jet turbulization is considered.     

Designing three-dimensional nozzles to achieve near-uniform supersonic or hypersonic flow in the rectangular exit section

The problem of profiling three-dimensional nozzles in order to achieve supersonic flow in the given rectangular exit section is studied. The question of designing an essentially three-dimensional nozzle with a variable cross-section shape is discussed. A technique for constructing three-dimensional nozzles with near-uniform flow in the exit section is proposed and realized.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 5, pp. 171–180, September–October, 1995.     

Pressure pulsations during interaction between a subsonic jet and the subsonic section of a supersonic jeton a flat obstacle

Pressure pulsations were measured during in-leakage of a subsonic jet and the subsonic section of a heated supersonic jet on a flat obstacle. Data have been obtained on the total and spectrum levels of the pressure pulsations at different spacings X of the obstacle from the nozzle exit. It is shown that when the obstacle is disposed at the section of the jet where the local velocity is subsonic, the pulsation levels outside the dependence on the conditions at the nozzle exit (Mach number Maxa 0 a 3.0; stagnation temperature T₀=280–1200K) vary in direct proportion to the local velocity head q. The ratio between the total level and q is (/g)=0.2–0.3. It is established that for a subsonic velocity ahead of the obstacle, all the spectra obtained for different values of M _a , T₀, d _a and X in the coordinates Sh=f(d/V) and (₁*/q)(V/d) will lie on a single generalized spectrum. Here ₁* is the pulsation level in a 1-Hz band, and d and V are, respectively, the jet diameter and velocity directly in front of the obstacle.Translated from Izvestiya Akademiya Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 172–174, September–October, 1975.     

Contribution to the asymptotic theory of quasisteady viscous flows

The aim of this paper is to obtain equations which, as Re , describe quasisteady viscous incompressible flows with stream surfaces that are closed only in the limit as Re , and also to examine the simpler consequences of these equations.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 46–51, July–August, 1985.The author wishes to thank V. Ya. Neiland for taking an interest in his work and discussing the results.     

Interpolation formulas for maxwell viscosity of certain metals as a function of shear-strain intensity and temperature

The purpose of this study is the construction of interpolation formulas for the dependence of Maxwell viscosity, a quantity which is the reciprocal of shear-strain relaxation time , on shear-strain intensity and temperature for several metals: iron, aluminum, copper, and lead. This function was interpolated in various temperature and deformation velocity ranges in accordance with available experimental data for iron (0 10⁷ sec^–1, 200 ° T 1500 °); aluminum (0 10⁷ sec^–1, 300 ° T 900 °); copper (0 10⁵ sec^–1, 300 ° T 1300 °); lead (0 10⁶ sec^–1, 90 ° T 400 °); temperatures in °K.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 4, pp. 114–118, July–August, 1974.     

Outflow of an unexpanded jet into counter supersonic and subsonic flows

The article gives the results of an experimental investigation of the geometric structure of an opposing unexpanded jet. It discusses flow conditions with interaction between the jet and sub- and supersonic flows. It is shown that, with the outflow of an unexpanded jet counter to a supersonic flow, there are unstable flow conditions. For stable flow conditions with one roll, dependences are proposed determining the form of a jet in a supersonic opposing flow. A generalized dependence is obtained for the distribution of the pressure at the surface of a body with a jet, flowing out counter to a subsonic flow. The range of change in the determining parameters are the following: Mach numbers at outlet cross section of nozzle, M _a = 1 and 3; Mach numbers of opposing flow, M = 0.6–0.9 and 2.9; degree of effectiveness of jet, n = p _a /p = 0.5–800 (p _a and p are the static pressures at the outlet cross section of the nozzle and in the opposing flow); the ratios of the specific heat capacities, _a = = 1.4; the drag temperatures of the jet and the flow, T_o = T_oa = 290°K.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 89–96, January–February, 1977.     

Calculation of the pressure on the side surface of bodies consisting of a spherical segment joined to an inverted cone in a supersonic stream

The results of investigations of inviscid flow over inverted cones with nose consisting of a spherical segment were published for the first time in Soviet literature in [1–4]. In the present paper, a numerical solution to this problem is obtained using the improved algorithms of [5, 6], which have proved themselves well in problems of exterior flow over surfaces with positive angles of inclination to the oncoming flow. It is shown that the Mach number 2 M , equilibrium and nonequilibrium physicochemical transformations in air (H = 60 km, V = 7.4 km/sec, R₀ = 1 m), and the angle of attack 0 40° influence the investigated pressure distributions. A comparison of the results of the calculations with drainage experiments for M = 6, = 0-25° confirms the extended region of applicability of the developed numerical methods. Also proposed is a simple correlation of the dependence on the Mach number in the range 1.5 M of the shape of the shock wave near a sphere in a stream of ideal gas with adiabatic exponent = 1.4.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 178–183, January–February, 1981.     

Transport in ordered and disordered porous media II: Generalized volume averaging

In this paper we develop the averaged form of the Stokes equations in terms of weighting functions. The analysis clearly indicates at what point one must choose a media-specific weighting function in order to achieve spatially smoothed transport equations. The form of the weighting function that produces the cellular average is derived, and some important geometrical theorems are presented.Roman Letters A interfacial area of the- interface associated with the local closure problem, m² - A _e area of entrances and exits for the-phase contained within the averaging system, m² - A _p surface area of a particle, m² - d _p 6V _p/A_p, effective particle diameter, m - g gravity vector, m/s² - I unit tensor - K _m permeability tensor for the weighted average form of Darcy's law, m² - L general characteristic length for volume averaged quantities, m - L _p general characteristic length for volume averaged pressure, m - L characteristic length for the porosity, m - L _v characteristic length for the volume averaged velocity, m - l characteristic length (pore scale) for the-phase - l _i i=1, 2, 3 lattice vectors, m - (y) weighting function - m(–y) (y), convolution product weighting function - _v special weighting function associated with the traditional averaging volume - m _v special convolution product weighting function associated with the traditional averaging volume - m _g general convolution product weighting function - m _V unit cell convolution product weighting function - m _C special convolution product weighting function for ordered media which produces the cellular average - m _D special convolution product weighting function for disordered media - m _M master convolution product weighting function for ordered and disordered media - n unit normal vector pointing from the-phase toward the-phase - p pressure in the-phase, N/m² - p_m superficial weighted average pressure, N/m² - p _m intrinsic weighted average pressure, N/m² - p traditional intrinsic volume averaged pressure, N/m² - p p p _m , spatial deviation pressure, N/m² - r ₀ radius of a spherical averaging volume, m - r _m support of the convolution product weighting function, m - r position vector, m - r position vector locating points in the-phase, m - V averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - V velocity vector in the-phase, m/s - vm superficial weighted average velocity, m/s - v _m intrinsic weighted average velocity, m/s - V volume of the-phase contained in the averaging volume, m³ - V _p volume of a particle, m³ - v traditional superficial volume averaged velocity, m/s - v v p _m spatial deviation velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V /V, volume average porosity - _m m * . weighted average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m² - V /V, volume fraction of the-phase     

Results of interferometer study of laval nozzle

Interferometric measurement of the air density in a supersonic nozzle of rectangular cross section is described. The flow structure is studied in a real Laval nozzle. It is shown that the core flow follows the laws of motion of an ideal gas and has a wave nature. The relation _Z=(3–4)_y is obtained for the boundary layer thickness on the nozzle walls for nozzle width-height ratio L/h=3.75–7.5.The flow structure in a real supersonic nozzle may differ significantly from the theoretical structure, both because of defects in nozzle fabrication and because of boundary layer growth on the nozzle walls. In many casesitis important to know the param'eters of the supersonic flow in the actual nozzle. The determination of these parameters (density , pressure , temperature T, velocity u, Mach number M) at any section of the nozzle in question is the objective of the present investigation.The authors wish to thank V. P. Koronkevich for his assistance in this study.     

On laminar flow through a uniformly porous pipe

Numerous investigations ([1] and [4–9]) have been made of laminar flow in a uniformly porous circular pipe with constant suction or injection applied at the wall. The object of this paper is to give a complete analysis of the numerical and theoretical solutions of this problem. It is shown that two solutions exist for all values of injection as well as the dual solutions for suction which had been noted by previous investigators. Analytical solutions are derived for large suction and injection; for large suction a viscous layer occurs at the wall while for large injection one solution has a viscous layer at the centre of the channel and the other has no viscous layer anywhere. Approximate analytic solutions are also given for small values of suction and injection.

Nomenclature

General r distance measured radially - z distance measured along axis of pipe - u velocity component in direction of z increasing - v velocity component in direction of r increasing - p pressure - density - coefficient of kinematic viscosity - a radius of pipe - V velocity of suction at the wall - r ²/a ² - R wall or suction Reynolds number, Va/ - f() similarity function defined in (6) - u ₀() eigensolution - U(0) a velocity at z=0 - K an arbitrary constant - B _K Bernoulli numbers Particular Section 5 perturbation parameter, –2/R - ² a constant, –K - x / - g(x) f()/ Section 6 perturbation parameter, –R/2 - ² a constant, –K - g() f() - g _c ()=g() near centre of pipe - * point where g()=0 Section 7 2/R - ² K - t (1–)/ - w(t, ) [1–f(t)]/ - ₀, ₁ constants - g() f()– ₀ - ₀/ - ₀ a constant - * point where f()=0     

Comparison of integrated characteristics and shapes of profiled contours of laval nozzles with “smooth” and “abrupt” contractions

The influence of the selection of the generator of subsonic sections of plane and axisymmetric Laval nozzles on the integrated characteristics and on the shapes of their profiled supersonic parts is investigated in the approximation of an ideal (inviscid and nonheat-conducting) gas. Nozzles with a smooth entrance and with an abrupt contraction are compared for the same flow rates and size restrictions on the whole nozzle, not only to its supersonic part. In such a formulation, in accordance with [1], nozzles with abrupt contractions in the flow of ideal gas in them should be expected to have the best characteristics. This is confirmed by the results of the calculations performed.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 129–137, July–August, 1986.The authors are grateful to V. A. Vostretsova for her help in the work.     

Conical flows in the neighborhood of breaks in the edges of surfaces separating cocurrent supersonic streams of perfect gas

An investigation is made into the conical flows which occur when a perfect (inviscid and nonheat conducting) gas flows over the terminal edges of surfaces with breaks separating an external and an internal flow with velocity vectors parallel to the line of intersection of the surfaces. Such flows are observed, in particular, in the neighborhood of breaks in the outlet edge of a nozzle of rectangular cross section with a straight or skewed exit plane under conditions of underexpanded flow of a supersonic jet into a cocurrent supersonic stream. By means of a linear analysis flow patterns corresponding to various flow interaction regimes and edge geometries are constructed and a law of similarity is formulated. The validity of the results thus obtained is confirmed by examples of the numerical solution of the complete nonlinear system of Euler equations. In this connection, within the framework of the approach outlined in [1], as a rule, together with the shocks and characteristic surfaces bounding the conical flow in question, the shear discontinuity separating the external and internal streams is constructed.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 119–127, January–February, 1935.     

Flow of soft solids squeezed between planar and spherical surfaces

The force to squeeze a Herschel–Bulkley material without slip between two approaching surfaces of various curvature is calculated. The Herschel–Bulkley yield stress requires an infinite force to make plane–plane and plane–concave surfaces touch. However, for plane–convex surfaces this force is finite, which suggests experiments to access the mesoscopic thickness region (1–100 m) of non-Newtonian materials using squeeze flow between a plate and a convex lens. Compared to the plane–parallel surfaces that are used most often for squeeze flow, the dependence of the separation h and approach speed V on the squeezing-time is more complicated. However, when the surfaces become close, a simplification occurs and the near-contact approach speed is found to vary as V h⁰ if the Herschel–Bulkley index is n<1/3, and V h^(3n-1)/(2n) if n 1/3. Using both plane–plane and plane–convex surfaces, concordant measurements are made of the Herschel–Bulkley index n and yield stress ₀ for two soft solids. Good agreement is also found between ₀ measured by the vane and by each squeeze-flow method. However, one of the materials shows a limiting separation and a V(h) behaviour not predicted by theory for h<10 m, possibly owing to an interparticle structure of similar lengthscale.     

Investigation of supersonic viscous flow past a sphere in the presence of subsonic and sonic injection

Supersonic flow past a sphere with a given rate of gas injection along the generator is investigated numerically on the range Re=10²–10⁴. Calculations have been made on the interval 0 90°, where is the angle between the axis of symmetry and the normal to the surface. It is shown that for high subsonic and sonic injection rates it is possible to observe qualitatively new features in the flow structure and in the distribution of the local supersonic flow characteristics around the perimeter of the sphere not previously noted in [9]. In the case of sonic injection the changes in flow structure occur only in the supersonic zone. In the neighborhood of the transition from a subsonic to sonic injection velocity the heat flux has a local maximum, which in absolute value does not exceed the heat flux in the absence of injection. It is shown that there may be qualitative differences in the pressure distribution over the surface of the body with increase in the injection parameter depending on the distribution and value of the injected gas flow rate and, moreover, the number Re.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 83–89, January–February, 1988.     

Minimum-drag cascade design for supersonic flow with subsonic normal velocity component

The variational problem of designing the slender profile of a plane cascade in a supersonic ideal (inviscid and nonheat-conducting) gas flow with a subsonic normal velocity component is solved in the linear approximation. The optimum profiles constructed differ fundamentally from the closest analog — the supersonic single profile creating minimum wave drag for given lift. Following [1], it is easy to show that in this case the optimum profile is a plate at an angle of attack determined by the given lift.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 137–146, January–February, 1995.     

The effect of background particulates on the delayed transition of a heated 9:1 ellipsoid

An experimental study was done to quantify the effects of a variety of background particulates on the delayed laminar-turbulent transition of a thermally stabilized boundary layer in water. A Laser-Doppler Velocimeter system was used to measure the location of boundary layer transition on a 50 mm diameter, 9:1 fineness ratio ellipsoid. The ellipsoid had a 0.15 m RMS surface finish. Boundary layer transition locations were determined for length Reynolds numbers ranging from 3.0 × 10⁶ to 7.5 × 106. The ellipsoid was tested in three different heating conditions in water seeded with particles of four distinct size ranges. For each level of boundary layer heating, measurements of transition were made for clean water and subsequently, water seeded with 12.5 m, 38.9 m, 85.5 m and 123.2 m particles, alternately. The three surface heating conditions tested were no heating, T = 10°C and T = 15°C where T is the difference between the inlet model heating water temperature, T _i, and free stream water temperature, T . The effects of particle concentration were studied for 85.5 m and 123.2 m particulates.The results of the study can be summarized as follows. The 12.5 m and 38.9 m particles has no measurable effect on transition for any of the test conditions. However, transition was significantly affected by the 85.5 m and 123.2 m particles. Above a length Reynolds number of 4 × 10⁶ the boundary layer transition location moved forward on the body due to the effect of the 85.5 m particles for all heating conditions. The largest percentage changes in transition location from clean water, were observed for 85.5 m particles seeded water.Transition measurements made with varied concentrations of background particulates indicated that the effect of the 85.5 m particles on the transition of the model reached a plateau between 2.65 particulates/ml concentration and 4.2 particles/ml. Measurements made with 123.3 m particles at concentrations up to 0.3 part/ml indicated no similar plateau.     

Stability and Transition on a Swept Cylinder in a Supersonic Flow

Results of experimental investigations of the evolution of natural disturbances and laminar–turbulent transition in a supersonic boundary layer on the attachment line of a circular cylinder with a sweep angle of 68° and a freestream Mach number M = 2 are presented. The experimental studies are supplemented by calculations of the mean flow and stability characteristics. Flow regimes in the boundary layer on the attachment line are determined by a hotwire technique as functions of the Reynolds number and height of twodimensional roughness elements. The results are compared with NASA (Ames) experiments.     

The CRONE Suspension: Management of the Dilemma Comfort-Road Holding

The CRONE suspension, French acronym of suspension à Comportement Robuste dOrdre Non Entier, results from a traditional suspension system whose spring and damper are replaced by a mechanical and hydropneumatic system defined by a fractional (so-called non-integer) order force–displacement transfer function. ling, frequency-domain robust control design methodology, optimal approach, stability analysis and performance are presented in this paper.     

Mean and turbulent velocity measurements of supersonic mixing layers

The behavior of supersonic mixing layers under three conditions has been examined by schlieren photography and laser Doppler velocimetry. In the schlieren photographs, some large-scale, repetitive patterns were observed within the mixing layer; however, these structures do not appear to dominate the mixing layer character under the present flow conditions. It was found that higher levels of secondary freestream turbulence did not increase the peak turbulence intensity observed within the mixing layer, but slightly increased the growth rate. Higher levels of freestream turbulence also reduced the axial distance required for development of the mean velocity. At higher convective Mach numbers, the mixing layer growth rate was found to be smaller than that of an incompressible mixing layer at the same velocity and freestream density ratio. The increase in convective Mach number also caused a decrease in the turbulence intensity ( _u/U).List of symbols a speed of sound - b total mixing layer thickness between U ₁ – 0.1 U and U ₂ + 0.1 U - f normalized third moment of u-velocity, f u³/(U)³ - g normalized triple product of u² , g u²/(U)³ - h normalized triple product of u ², h u ²/(U)³ - l _u axial distance for similarity in the mean velocity - l _u axial distance for similarity in the turbulence intensity - M Mach number - M _c convective Mach number (for ₁ = ₂), M _c (U ₁ – U ₂)/(a ₁ + a ₂) - P static pressure - r freestream velocity ratio, r U ₂/U ₁ - Re unit Reynolds number, Re U/ - s freestream density ratio, s ₂/₁ - T _t total temperature - u instantaneous streamwise velocity - u deviation of u-velocity, uu – U - U local mean streamwise velocity - U ₁ primary freestream velocity - U ₂ secondary freestream velocity - average of freestream velocities, (U ₁ + U ₂)/2 - U freestream velocity difference, U U ₁ – U ₂ - instantaneous transverse velocity - v deviation of -velocity, – V - V local mean transverse velocity - x streamwise coordinate - y transverse coordinate - y ₀ transverse location of the mixing layer centerline - ensemble average - ratio of specific heats - boundary layer thickness (y-location at 99.5% of free-stream velocity) - similarity coordinate, (y – y ₀)/b - compressible boundary layer momentum thickness - viscosity - density - standard deviation - dimensionless velocity, (U – U ₂)/U - 1 primary stream - 2 secondary stream A version of this paper was presented at the 11th Symposium on Turbulence, October 17–19, 1988, University of Missouri-Rolla     

Effect of Dynamic Prehistory on Aerodynamics of a Laminar Separated Flow in a Channel Behind a Rectangular Backward‐Facing Step

The effect of dynamic prehistory of the flow and the channelexpansion ratio on aerodynamics of a steady separated laminar flow behind a rectangular backwardfacing step located in a planeparallel channel is numerically studied. It is shown that the boundary layer upstream of the flow separation exerts a strong effect on flow characteristics behind the step. A decrease in the boundarylayer thickness in the cross section of the step leads to a decrease in the separationregion length, and an increase in the channelexpansion ratio with a fixed initial boundarylayer thickness and Reynolds number leads to an increase in the separationregion length.