Remarkable sensitivity of the electrochemical reduction of benzophenone to proton availability in ionic liquids

The reduction of benzophenone was investigated in five different ionic liquids by using transient cyclic voltammetry, near steady-state voltammetry, and numerical simulation. Two reversible, well-resolved one-electron-reduction processes were observed in dry (≤20 ppm water, ca. 1 mM)) 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([Bmpyrd][NTf(2)]) and 1-butyl-1-methylpiperidinium bis(trifluoromethylsulfonyl)imide ([Bmpipd][NTf(2)]), which did not contain any readily available proton source. Upon addition of water, the second process became chemically irreversible and shifted to a more positive potential by approximately 600 mV; moreover, the two reduction processes merged into a single two-electron proton-coupled process when about 0.6 M H(2)O was present. This large dependence of potential on water content, which was not observed in molecular solvents (electrolyte), was explained by a reaction mechanism that incorporated protonation and hydrogen-bonding interactions of the benzophenone dianion with as many as seven water molecules. In the three imidazolium-based ionic liquids used herein, the first benzophenone-reduction process was again reversible, whilst the second reduction process became chemically irreversible owing to the availability of the C2-H imidazolium protons in these ionic liquids. The reversible potentials for benzophenone reduction were remarkably independent of the identity of the ionic liquids, thereby implying either weak interactions with the ionic liquids or relatively insignificant differences in the levels of ion-pairing. Thus, the magnitude of the separation of the potentials of the reversible first and irreversible second reduction processes mainly reflected the proton availability from either the ionic liquid itself or from adventitious water. Consequently, voltammetric reduction of benzophenone provides a sensitive tool for the determination of proton availability in ionic liquids.     

Direct electrochemistry of cytochrome c entrapped in agarose hydrogel in room temperature ionic liquids

Direct electrochemistry of cytochrome c (cyt-c) entrapped in agarose hydrogel on gold electrode (Au), edge plane pyrolytic graphite electrode (EPPGE) and glassy carbon electrode (GC) in two room temperature ionic liquids was investigated. The effects of the addition of N,N-dimethylformamide (DMF) in the agarose-cyt-c film, water concentration in ionic liquids and exterior metal ions on the electrochemical behavior of cyt-c were monitored, and electrocatalytic properties of cyt-c were also done. Results showed that a good quasi-reversible redox behavior of cyt-c could be found after adding DMF in agarose-cyt-c film, and peak shape would not change after continuously scanning for 50 cycles. In addition, a certain amount of water in hydrophilic ionic liquids is necessary to maintain electrochemical activities of cyt-c, electrochemical performance of cyt-c is the best when the water content is 5.2% and 5.8% for 1-butyl-3-methylimidazolium bromide ([Bmim][Br]) and 1-butyl-3-methylimidazolium tetrafluoroborate([Bmim][BF(4)]) respectively. However, electrochemical activities of cyt-c are inhibited by exterior metal ions. Interestingly, cyt-c entrapped in agarose hydrogel on EPPGE and GC could catalyze the electroreduction of trichloroacetic acid (TCA) and tert-butyl hydroperoxide (t-BuOOH) in [Bmim][BF(4)], but could not in [Bmim][Br]. Reasons for above-mentioned differences of electrochemical properties of cyt-c in different ionic liquids were preliminarily discussed.     

Parametrization of 1-butyl-3-methylimidazolium hexafluorophosphate/nitrate ionic liquid for the GROMOS force field

A united-atom model of 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]) and 1-butyl-3-methylimidazolium nitrate ([BMIM][NO(3)]) is developed in the framework of the GROMOS96 43A1(1) force field. These two ionic liquids are parametrized, and their equilibrium properties in the 298-363 K temperature range are subjected to validation against known experimental properties, namely, density, self-diffusion, shear viscosity, and isothermal compressibility. The ionic radial/spatial distributions, pi interaction, gauche/trans populations of the butyl tail, and enthalpies of vaporization are also reported. The properties obtained from the molecular dynamics simulations agree with experimental data and have the same temperature dependence. The strengths and weakness of our model are discussed.     

Computing the NMR spectrum of a bulk ionic liquid phase by QM/MM methods

The dependence of (1)H and (13)C NMR chemical shifts of 1-butyl-3-methylimidazolium ([bmim])-based room-temperature ionic liquids on the counteranion ([BF(4)], [MeSO(4)]) is investigated experimentally and computationally. The local structure of the ionic liquids is investigated by means of DFT calculations of the structure of ion pairs and molecular dynamics simulations. Clusters extracted from the simulation runs are used to calculate (1)H and (13)C chemical shifts by means of QM/MM methods with various partition schemes. Proton H2 of the imidazolium ring is the most sensitive to the counteranion; its chemical shift is strongly dependent on subtle details of the arrangement of the two closest anions. It is shown that a correct spacing of signals can be attained by including the two anions closest to C2 and H2 in the QM layer.     

Temperature dependence of multilayering at the free surface of ionic liquids probed by X-ray reflectivity measurements

The effect of the temperature on the surface layering of ionic liquids has been studied for two ionic liquids, trioctylmethylammonium bis(nonafluorobutanesulfonyl)amide([TOMA(+)][C(4)C(4)N(-)]) and trihexyltetradecylphosphonium bis(nonafluorobutanesulfonyl)amide ([THTDP(+)][C(4)C(4)N(-)]), using X-ray reflectivity measurements at 285, 300, and 315 K. Both [TOMA(+)][C(4)C(4)N(-)] and [THTDP(+)][C(4)C(4)N(-)] develop multilayers at the surface. The structure of the multilayers at the [TOMA(+)][C(4)C(4)N(-)] surface shows little temperature-dependent change, whereas that at the [THTDP(+)][C(4)C(4)N(-)] surface clearly becomes diffused with increasing temperature. The different temperature dependence seems to be related to the difference in the recently reported ultraslow dynamics of the interfacial structure of [TOMA(+)][C(4)C(4)N(-)] and [THTDP(+)][C(4)C(4)N(-)] at the ionic liquid|water interface.     

Stereoselective synthesis of tetrasubstituted 2,3-dihydrofurans by one-step cyclization of beta-ketosulfides of benzothiazole and aldehydes in ionic liquids

A stereoselective synthesis of tetrasubstituted 2,3-dihydrofurans was carried out in n-butylpyridinium tetrafluoroborate ([bpy(+)][BF(4)(-)]) as solvent. The reaction proceeds smoothly in one step starting from simple materials such as aldehydes and beta-ketosulfides of benzothiazole. A comparison between several ionic liquids (ILs) is presented, and the role of the benzothiazolyl moiety is discussed. Workup proved to be very easy and recycling of IL possible.     

Rotational dynamics of water and benzene controlled by anion field in ionic liquids: 1-butyl-3-methylimidazolium chloride and hexafluorophosphate

The rotational correlation time (tau(2R)) is determined for D(2)O (polar) and C(6)D(6) (apolar) in 1-butyl-3-methylimidazolium chloride ([bmim][Cl]) and hexafluorophosphate ([bmim][PF(6)]) by measuring (2)H (D) nuclear magnetic resonance spin-lattice relaxation time (T(1)) in the temperature range from -20 to 110 degrees C. The tau(2R) ratio of water to benzene (tau(WB)) was used as a measure of solute-solvent attraction. tau(WB) is 0.73 and 0.52 in [bmim][Cl] and [bmim][PF(6)], respectively, whereas the molecular volume ratio is as small as 0.11. The slowdown of the water dynamics compared to the benzene dynamics in ionic liquids is interpreted by the Coulombic attractive interaction between the polar water molecule and the anion. As for the anion effect, the rotational dynamics of water solvated by Cl(-) is slower than that solvated by PF(6) (-), whereas the rotational dynamics of benzene is similar in the two ionic liquids. This is interpreted as an indication of the stronger solvation by the anion with a larger surface charge density. The slowdown of the water dynamics via Coulombic solvation is actually significant only at water concentrations lower than approximately 9 mol dm(-3) at room temperature, and it is indistinguishable at temperatures above approximately 100 degrees C. The quadrupolar coupling constants determined for D(2)O and C(6)D(6) in the ionic liquids were smaller by a factor of 2-3 than those in the pure liquid state.     

Mutual diffusion in binary mixtures of ionic liquids and molecular liquids by dynamic light scattering (DLS)

The present study shows that dynamic light scattering (DLS) is capable of measuring mutual diffusion coefficients for binary mixtures of ionic liquids (ILs) with different molecular liquids over the complete composition range. Evidence is given that the light scattering signals are related to true molecular binary diffusion. The method stands out due to its ability to work non-invasively in macroscopic thermodynamic equilibrium with reasonable accuracy and within convenient measurement periods. Compared with other techniques, mixtures with distinctly higher viscosities can be probed. For exemplary binary mixtures of 1-ethyl-3-methylimidazolium ethylsulfate ([EMIM][EtSO(4)]) with acetone, acetonitrile, dichloromethane, ethanol, or water as well as of 1-ethyl-3-methylimidazolium methanesulfonate ([EMIM][MeSO(3)]) with acetone, water, or methanol, mutual diffusivity data were measured over a wide range of composition at a temperature of 293.15 K. In general, the mutual diffusivity increases with increasing mole fraction of the molecular liquid and similarities to aqueous solutions of classical inorganic salts can be found. The characteristic behavior of the mutual diffusion coefficients is influenced by the nature of the chosen molecular liquid. For IL water mixtures, low light scattering intensities were observed despite the large refractive index difference of the pure components. The reason for this behavior may be the existence of water clusters in the mixtures. Additional measurements for IL acetone mixtures at temperatures ranging from 278.15 K to 323.15 K showed that the temperature dependence of the mutual diffusivity can be represented by Arrhenius functions and is increasing for decreasing mole fractions of acetone.     

Limiting diffusion coefficients of ionic liquids in water and methanol: a combined experimental and molecular dynamics study

Mutual diffusion coefficients D(12) of the ionic liquids 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C(2)MIM][NTf(2)]) and [C(4)MIM][NTf(2)] in highly diluted solutions of water and methanol have been measured at different temperatures between 288 K and 313 K using the Taylor dispersion technique. Tracer diffusion coefficients of the two cations [C(2)MIM](+) and [C(4)MIM](+) as well as the anion [NTf(2)](-) in these solutions have been obtained by molecular dynamics (MD) simulations. For our simulations we used well established force fields for the solvents water and methanol and a recently developed force field for imidazolium-based ionic liquid [C(n)MIM][NTf(2)]. Mutual diffusion coefficients D(12) have been calculated from the tracer diffusion coefficients using the Nernst-Hartley equation strictly valid only at low ionic concentration. The agreement between the diffusion coefficients reported in the literature, the experimental data obtained in this work and the MD results is excellent.     

Photophysics and dynamics of a β-carboline analogue in room temperature ionic liquids

Room temperature ionic liquids are rapidly emerging as a new class of media that are ideally suited for various applications including carrying out chemical reactions. In the present article, we report the photophysics of a β-carboline analogue, namely, 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine (AODIQ), in three room temperature ionic liquids (RTILs), 1-butyl-3-methylimidazolium methyl sulfate ([BMIM][MeSO(4)]), 1-butyl-3-methylimidazolium octyl sulfate ([BMIM][C(8)SO(4)]) and 1-ethyl-3-methylimidazolium methyl sulfate ([EMIM][MeSO(4)]). Out of these, [BMIM][C(8)SO(4)] is a typical RTIL that forms micellar aggregates above a critical micellar concentration (CMC). Steady state absorption, steady state and time resolved fluorescence techniques are used to probe the properties of these systems. The investigation reveals that the photophysics of AODIQ is modified significantly in the micelle-forming RTIL as compared to that in the other two. A comparative study with the fluorophore in [BMIM][C(8)SO(4)] and a conventional anionic surfactant of a similar hydrophobic chain length from the sodium-n-alkyl sulfate series, viz., sodium octyl sulfate (S(8)S), reveals that the fluorophore experiences a more constrained environment in the RTIL micelle as compared to the conventional anionic micelle.     

Phase Behavior of Ionic Liquids-Cesium Carbonate-Water Aqueous Two-phase Systems and Their Extraction of L-Tryptophan

Phase behavior and extraction ability of aqueous two-phase systems(ATPs) consisting of ionic liquids(ILs), Cs₂CO₃ and water were investigated in this paper. Four kinds of ionic liquids, namely, 1-amyl-3-methylimidazolium bromide([C₅mim]Br), 1-hexyl-3-methylimidazolium bromide([C₆mim]Br), 1-heptyl-3-methylimidazolium bromide ([C₇mim]Br) and 1-octyl-3-methylimidazolium bromide([C₈mim]Br), were examined to discuss the influence of alkyl groups. Binodal curves and tie-lines at 288.15, 298.15 and 308.15 K were obtained. The partitioning behavior for L-tryptophan in such ATPs was further investigated. The effect of temperature, pH, Cs₂CO₃ concentration and the structure of ionic liquids on the partitioning were discussed in detail.     

Effect of the structures of ionic liquids and alkylbenzene-derived amphiphiles on the inhibition of asphaltene precipitation from CO2-injected reservoir oils

The inhibition of asphaltene precipitation from high-pressure, CO(2)-injected reservoir oils by ionic and nonionic amphiphiles, the ionic liquids based on p-alkylpyridinium ([C(n)()py](+)) and N-butylisoquinolinium ([C(4)iql](+)) cations, and the alkylbenzene-derived amphiphiles p-alkylphenol (C(n)()phol), p-alkylbenzenesulfonic acid (C(n)()bsa), and sodium p-alkylbenzenesulfonate (C(n)()bsNa) was investigated for the first time. The influences of the structures of these compounds and the effect of the combination of their cations and anions were studied. The results show that the inhibition abilities of the alkylbenzene-derived amphiphiles first increase when n = 2-8 and then remain almost constant when n >/=8 and that the effectiveness follows the order C(n)()phol < C(n)()bsa approximately C(n)()bsNa. The inverse trend is observed for the ionic liquids [C(n)()py][Cl]; that is, their inhibition abilities decrease as n increases from 4 to 8 to 12. [C(4)iql][Cl] is more effective than [C(4)py][Cl], but [C(n)()py][BF(4)] and [C(n)()py][PF(6)] have almost no effect on the stabilization of asphaltenes. It was found that the effectiveness of an alkylbenzene-derived amphiphile on the inhibition of asphaltene precipitation from reservoir oils relies on its ability to form a stable steric-stabilization layer around asphaltenes, which is controlled by the polarity of its headgroup and the length of its alkyl tail. The novel mechanism of inhibiting asphaltene precipitation using the ionic liquids [C(n)()py] ([Cl], [BF(4)], and [PF(6)]) and [C(4)iql][Cl] was proposed. The mechanism states that the ionic liquids can effectively prevent asphaltene precipitation from the reservoir oils by breaking the asphaltene associations, which are due to the local nonneutrality of the charge densities of the cation and the anion. The ionic liquids that are based on an anion with high charge density, in connection with cations with sufficiently low charge densities, can effectively inhibit asphaltene precipitation from the reservoir oils. This mechanism is also important for studying the thermodynamic properties and phase behavior of the ionic liquids.     

Hydroxylation of alkyl halides with water in ionic liquid: significantly enhanced nucleophilicity of water

A facile method for the nucleophilic hydroxylation of alkyl halides and mesylates with water has been developed in which the use of ionic liquid as an alternative reaction medium not only enhanced the nucleophilicity of water but also reduced the formation of elimination products predominantly formed under the conventional basic reaction conditions. For example, hydroxylation of model compound 2-(3-bromopropyl)naphthalene (1) to 2-(3-hydroxypropyl)naphthalene (2) with water in 1-n-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)]) and 1,4-dioxane proceeded selectively in high yield (94%). The reactivity of other nucleophilic oxygen sources such as alcohol, phenol, and acetic acid in an ionic liquid was also investigated.     

DOSY technique applied to palladium nanoparticles in ionic liquids

Multinuclear ((1)H, (31)P, (19)F and (11)B) diffusion ordered spectroscopy (DOSY) technique has been applied to palladium nanoparticles systems dispersed in ionic liquids (ILs). Even if the nanoparticles themselves cannot be detected through NMR, observation of the solvent (methanol) and the IL ([BMI][PF(6)] or [BMI][NTf(2)]), their diffusion coefficients and their changes in the presence of nanoparticles allow us to draw significant assumptions about the organisation of palladium nanoparticles in the IL. For comparison, the corresponding molecular precursors ([PdCl(2)(cod)] or [Pd(2)(dba)(3)]) have been also studied.     

Simulations of photoemission and equilibrium redox processes of ionic liquids: the role of ion pairing and long-range polarization

We have studied oxidation and reduction of ionic liquids using methods of theoretical chemistry. In particular, we have modeled photoelectron spectra of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([emim][Tf(2)N]) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf(2)N]) ionic liquids and their components. We have considered ion pairs in the gas phase and solvated in the water represented by a dielectric continuum. We have also characterized the isolated cation and anion of the ionic liquids. The calculated quantities have been compared with available experiments. The photoelectron spectra were modeled within linearized reflection approximation, using a composite ab initio approach based on combination of the MP2 method for the ground state, the PMP2 method for the first ionized electronic state and the TDDFT method to estimate the higher ionization energies. We have also briefly explored energetics of processes following the vertical electron attachment/detachment. Our calculations were able to reproduce the measured photoelectron spectra. We have shown that the valence photoelectron spectrum results from simultaneous ionization from many molecular orbitals. In the threshold region, the electron is ejected from the anion in the gas phase ion pair while the cationic moiety is ionized when the ion pair is solvated. We have investigated the effect of both short-range and long-range interactions on the ionization characteristics, showing that the long-range polarization of the solvent effectively screens the specific short-range interactions. The large difference between the HOMO-LUMO gap and the electrochemical window has been rationalized in terms of relaxation following the redox processes, i.e. solute and solvent geometric relaxation and reactions, e.g. dimerization of the imidazolium radical formed during the reduction.     

Nonsolvent application of ionic liquids: organo-catalysis by 1-alkyl-3-methylimidazolium cation based room-temperature ionic liquids for chemoselective N-tert-butyloxycarbonylation of amines and the influence of the C-2 hydrogen on catalytic efficiency

1-Alkyl-3-methylimidazolium cation based ionic liquids efficiently catalyze N-tert-butyloxycarbonylation of amines with excellent chemoselectivity. The catalytic role of the ionic liquid is envisaged as "electrophilic activation" of di-tert-butyl dicarbonate (Boc(2)O) through bifurcated hydrogen bond formation with the C-2 hydrogen of the 1-alkyl-3-methylimidazolium cation and has been supported by a downfield shift of the imidazolium C-2 hydrogen of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][NTf(2)]) from δ 8.39 to 8.66 in the presence of Boc(2)O in the (1)H NMR and a drastic reduction of the catalytic efficiency with 1-butyl-2,3-dimethylimidazolium ionic liquids that are devoid of the C-2 hydrogen. The differential time required for reaction with aromatic and aliphatic amines has offered means for selective N-t-Boc formation during inter and intramolecular competitions. Preferential N-t-Boc formation with secondary aliphatic amine has been achieved in the presence of primary aliphatic amine. Comparison of the catalytic efficiency for N-t-Boc formation with a common substrate revealed that [bmim][NTf(2)] is superior to the reported Lewis acid catalysts.     

Protein structure and dynamics in ionic liquids. Insights from molecular dynamics simulation studies

We present in this work the first molecular simulation study of an enzyme, the serine protease cutinase from Fusarium solani pisi, in two ionic liquids (ILs): 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) and 1-butyl-3-methylimidazolium nitrate ([BMIM][NO(3)]). We tested different water contents in these ILs at room temperature (298 K) and high temperature (343 K), and we observe that the enzyme structure is highly dependent on the amount of water present in the IL media. We show that the enzyme is preferentially stabilized in [BMIM][PF6] at 5-10% (w/w) (weight of water over protein) water content at room temperature. [BMIM][PF6] renders a more nativelike enzyme structure at the same water content of 5-10% (w/w) as previously found for hexane, and the system displays a similar bell-shape-like dependence with the water content in the IL media. [BMIM][PF6] is shown to increase significantly the protein thermostability at high temperatures, especially at low hydration. Our analysis indicates that the enzyme is less stabilized in [BMIM][NO(3)] relative to [BMIM][PF6] at both temperatures, most likely due to the strong affinity of the [NO(3)]- anion toward the protein main chain. These findings are in accordance with the experimental knowledge for these two ionic liquids. We also show that these ILs "strip off" most of the water from the enzyme surface in a degree similar to that found for polar organic solvents such as acetonitrile, and that the remaining waters at the enzyme surface are organized in many small clusters.     

Relative hydrophobicity of equilibrium phases in biphasic systems (ionic liquid + water)

Partition coefficients for a series of dinitrophenylated (DNP) amino acids in biphasic systems composed of hydrophobic ionic liquids and water were experimentally determined. The ionic liquids used were three 1-alkyl-3-methylimidazolium tetrafluoroborates, [C_nmim][BF₄], with alkyl chain substituents hexyl, octyl, and decyl. The liquid–liquid phase diagram for the system ([C₁₀mim][BF₄] + water) was experimentally determined. DNP amino acids distribute preferentially to the IL-rich phase and ([C₁₀mim][BF₄] + water) was found to be the system with the lowest partition coefficients for the solutes studied. The experimental partition coefficients decrease as the size of the alkyl side chain in the ionic liquids increases. The free energy of transfer of a methylene group between phases was calculated through the partition coefficients, which provides a measure of the relative hydrophobicity of the equilibrium phases. It was found that the system ([C₁₀mim][BF₄] + water) presents a lower free energy (and thus a lower relative hydrophobicity) than the system ([C₈mim][BF₄] + water). In order to better understand this result, the micellar behavior of the three ionic liquids was studied. Electrical conductivities of several aqueous solutions of the ionic liquids were measured to determine the critical micelle concentration (CMC) and the degree of micelle ionization, α, of the three ionic liquids. From these two properties it was possible to obtain the free energy of micellization, ΔG_mic, for the ionic liquids.     

Theoretical analysis of the hydrogen bond of imidazolium C(2)-H with anions

The intermolecular interaction energies of ion pairs of imidazolium-based ionic liquids were studied by MP2/6-311G level ab initio calculations. Although the hydrogen bond between the C(2) hydrogen atom of an imidazolium cation and anion has been regarded as an important interaction in controlling the structures and physical properties of ionic liquids as in the cases of conventional hydrogen bonds, the calculations show that the nature of the C(2)-H...X interaction is considerably different from that of conventional hydrogen bonds. The interaction energies of the imidazolium cation with neighboring anions in the four crystals of ionic liquids were calculated. The size of the interaction is determined mainly by the distance between the imidazolium ring and anion. The calculated interaction energy is nearly inversely proportional to the distance, which shows that the charge-charge interaction is the dominant interaction in the attraction. The orientation of the anion relative to the C(2)-H bond does not greatly affect the size of the interaction energy. Calculated interaction energy potentials of 1,3-dimethylimidazolium tetrafluoroborate ([dmim][BF(4)]) complexes show that the C(2)-H bond does not prefer to point toward a fluorine atom of the BF(4). This shows that the C(2)-H...X hydrogen bond is not essential for the attraction.