A new strategy for designing non-C2-symmetric monometallic bifunctional catalysts and their application in enantioselective cyanation of aldehydes

A monometallic bifunctional catalyst, in which only one imidazolyl moiety is directly attached at the 3-position of a binaphthol moiety, has been developed. The ligand (R)-1, which lacks C2-symmetry and flexible linkers, in combination with Ti(OiPr)4, has been demonstrated to promote the enantioselective cyanation of aldehydes with trimethylsilylcyanide (TMSCN), giving excellent enantioselectivities of up to 98 % ee and high yields of up to 99 %. The use of this bifunctional catalytic system obviates the need for additives and is extremely simple as the reagents are added in one portion at the beginning of the reaction. The protocol has been found to tolerate a relatively wide range of aldehydes when 10 mol % of the (R)-1/Ti(OiPr)4 complex is deployed in CH2Cl2 at -40 degrees C, the conditions which proved most practical and effective. The asymmetric cyanations also proceeded with lower catalyst loadings (5 mol %, or even 2 mol %), still giving satisfactory enantiomeric excesses and yields. Interestingly, the use of freshly distilled TMSCN dried over CaH2 gave a low enantioselectivity and only a moderate yield of the adduct as compared with direct use of the commercial reagent. The results of 13C NMR spectroscopic studies implicate HCN as the actual reactive nucleophile.     

Synthesis of C3-symmetric tris(beta-hydroxy amide) ligands and their Ti(IV) complex-catalyzed enantioselective alkynylation of aldehydes

[reaction: see text]. A series of new chiral C3-symmetric tris(beta-hydroxy amide) ligands have been synthesized via the reaction of 1,3,5-benzenetricarboxylic chloride and optically pure amino alcohols (up to 96% yield). The asymmetric catalytic alkynylation of aldehydes with these new C3-symmetric chiral tris(beta-hydroxy amide) ligands and Ti (O(i)'Pr)4 was investigated. Ligand 4c synthesized from (1R,2S)-(-)-2-amino-1,2-diphenylethanol is effective for the enantioselective alkynylation of various aldehydes, and high enantioselectivity was obtained with aromatic aldehydes and alpha,beta-unsaturated aldehyde (up to 92% ee).     

Syntheses and structures of the infinite chain compounds Cs(4)Ti(3)Se(13), Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14)

The alkali metal/group 4 metal/polychalcogenides Cs(4)Ti(3)Se(13), Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14) have been synthesized by means of the reactive flux method at 823 or 873 K. Cs(4)Ti(3)Se(13) crystallizes in a new structure type in space group C(2)(2)-P2(1) with eight formula units in a monoclinic cell at T = 153 K of dimensions a = 10.2524(6) A, b = 32.468(2) A, c = 14.6747(8) A, beta = 100.008(1) degrees. Cs(4)Ti(3)Se(13) is composed of four independent one-dimensional [Ti(3)Se(13)(4-)] chains separated by Cs(+) cations. These chains adopt hexagonal closest packing along the [100] direction. The [Ti(3)Se(13)(4-)] chains are built from the face- and edge-sharing of pentagonal pyramids and pentagonal bipyramids. Formal oxidation states cannot be assigned in Cs(4)Ti(3)Se(13). The compounds Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14) crystallize in the K(4)Ti(3)S(14) structure type with four formula units in space group C(2)(h)()(6)-C2/c of the monoclinic system at T = 153 K in cells of dimensions a = 21.085(1) A, b = 8.1169(5) A, c = 13.1992(8) A, beta = 112.835(1) degrees for Rb(4)Ti(3)S(14);a = 21.329(3) A, b = 8.415(1) A, c = 13.678(2) A, beta = 113.801(2) degrees for Cs(4)Ti(3)S(14); a = 21.643(2) A, b = 8.1848(8) A, c = 13.331(1) A, beta = 111.762(2) degrees for Rb(4)Hf(3)S(14); a = 22.605(7) A, b = 8.552(3) A, c = 13.880(4) A, beta = 110.919(9) degrees for Rb(4)Zr(3)Se(14); a = 22.826(5) A, b = 8.841(2) A, c = 14.278(3) A, beta = 111.456(4) degrees for Cs(4)Zr(3)Se(14); and a = 22.758(5) A, b = 8.844(2) A, c = 14.276(3) A, beta = 111.88(3) degrees for Cs(4)Hf(3)Se(14). These A(4)M(3)Q(14) compounds (A = alkali metal; M = group 4 metal; Q = chalcogen) contain hexagonally closest-packed [M(3)Q(14)(4-)] chains that run in the [101] direction and are separated by A(+) cations. Each [M(3)Q(14)(4-)] chain is built from a [M(3)Q(14)] unit that consists of two MQ(7) pentagonal bipyramids or one distorted MQ(8) bicapped octahedron bonded together by edge- or face-sharing. Each [M(3)Q(14)] unit contains six Q(2)(2-) dimers, with Q-Q distances in the normal single-bond range 2.0616(9)-2.095(2) A for S-S and 2.367(1)-2.391(2) A for Se-Se. The A(4)M(3)Q(14) compounds can be formulated as (A(+))(4)(M(4+))(3)(Q(2)(2-))(6)(Q(2-))(2).     

新颖有机催化剂的合成及催化不对称直接Aldol反应研究

以N-苄氧羰基-(S)-脯氨酸和5-(1-氨基烷基)四氮唑(烷基: 甲基、乙基、2-苯基乙基)为原料, 经两步反应合成了3个新颖的有机催化剂: (S)-5-脯氨酰胺基甲基四氮唑(3a), (S,S)-5-(1-脯氨酰胺基乙基)四氮唑(3b)和(S,S)-5-(1-脯氨酰胺 基-2-苯基乙基)四氮唑(3c), 并首次将其用于催化丙酮和含吸电子基芳香醛的不对称直接aldol反应. 在室温条件下, 催化剂3b表现出较好的催化活性, 产物的ee值最高可达96%.     

新型P,N配体及基1,4-共轭加成反应

以2-萘酚为起始原料,经过氧化偶联,消旋体的拆分得到手性骨架2-氨基-2'-羟基-1,1'-联萘(NOBIN),并以S-NOBIN为原料,经过六步反应合成了两个新型配体S-(+)-2-(2-吡啶酰胺基)-2'-二苯基膦基-1,1'-联萘(1a)和S-(+)-2-(6-甲基-2-吡啶酰胺基)-2'-二苯基膦基-1,1'-联萘(1b)。并进行了铜配合物催化的二乙基锌对2-环己烯酮的1,4-共轭加成反应的研究。反应产物3-乙基环己酮(13)的e.e.值高达92%。     

Syntheses and characterization of titanium(IV) and titanium(III) complexes with (2-dimethylphosphino)ethane-1-thiolate and (3-dimethylphosphino)propane-1-thiolate as ligands

Reactions of Cp(2)TiCl(2) (Cp = eta(5)-cyclopentadienide) with 2 or 1 equiv of hybrid P-S ligands (L), (CH(3))(2)P(CH(2))(n)()S(-) (n = 2, dmpet; n = 3, dmppt), produced new dicyclopentadienyltitanium(IV) complexes with L, Cp(2)Ti(L-kappaS)(2) (1, L = dmpet; 2, L = dmppt) and [Cp(2)Ti(L-kappa(2)S,P)]BPh(4) (3, L = dmpet; 4, L = dmppt). The Ti(III) complexes, Cp(2)Ti(L-kappa(2)S,P) (5, L = dmpet; 6, L = dmppt), were prepared by the reaction of Cp(2)Ti(eta(3)-C(3)H(5)) with 1 equiv of L. The structures of complexes 1-6 were confirmed by X-ray diffraction analyses. It was found that complexes 3 and 5 were isostructural around Ti(IV) and Ti(III) centers: the Ti(IV)-S bond length in 3 (2.3498(9) A) is shorter by 0.14 A than Ti(III)-S in 5 (2.4877(7) A), while Ti(IV)-P (2.534(1) A) was merely 0.05 A shorter than Ti(III)-P (2.5844(7) A). The redox potential between 3 and 5 in acetonitrile was -1.14 V vs the ferricinium/ferrocene couple. A heterobimetallic complex that has the frame of complex 1, [Cp(2)Ti(dmpet)(2)Cu]PF(6) (7), was also isolated and structurally characterized: the Ti-Cu distance (2.95(1) A) was shorter than that in [Cp(2)Ti(SC(2)H(4)PPh(2))(2)Cu]BF(4), previously reported by White and Stephan. Structural characterization was also carried out for CpTi(dmpet-kappaS)(2)(dmpet-kappa(2)S,P) (8) and CpTiCl(2)(dmppt-kappa(2)S,P) (9), which were obtained by the reactions of Cp(or Cp)TiCl(3) (Cp = eta(5)-C(5)Me(5)(-)) with n equiv (n = 1-3) of L. The mutual site-exchange reaction between phosphorus atoms on a coordinated dmpet in the kappa(2)S,P mode and on two other coordinated dmpet's in the kappaS mode within complex 8 was analyzed by the variable-temperature (31)P[(1)H] dynamic NMR method. The kinetic parameters for this process, k(ex)(298) = 1.9 x 10(5) s(-)(1), DeltaH = 48 kJ mol(-)(1), and DeltaS = 17 J mol(-)(1) K(-)(1), as well as the rather long Ti(IV)-P distance (2.652(1) A), indicate the fluxional nature of the coordination geometry in complex 8.     

Catalytic asymmetric cyano-ethoxycarbonylation reaction of aldehydes using a YLi3 tris(binaphthoxide) (YLB) complex: mechanism and roles of achiral additives

Full details of a catalytic asymmetric cyano-ethoxycarbonylation reaction promoted by a heterobimetallic YLi3 tris(binaphthoxide) complex (YLB 1), especially mechanistic studies, are described. In the cyanation reaction of aldehydes with ethyl cyanoformate, three achiral additives, H2O, tris(2,6-dimethoxyphenyl)phosphine oxide (3a), and BuLi, were required to achieve high reactivity and enantioselectivity (up to >99% yield and up to 98% ee). The roles of achiral additives and the reaction pathway were investigated in detail. In situ IR analysis revealed that the initiation step to generate LiCN from H2O, BuLi, and ethyl cyanoformate is rather slow. On the basis of mechanistic studies of the initiation step to generate an active nucleophilic species, reaction conditions were optimized by using a catalytic amount of acetone cyanohydrin as an initiator. Under the optimized conditions, the induction period decreased and the reaction completed within 9 min using 5 mol % YLB at -78 degrees C. Catalyst loading was successfully reduced to 1 mol %. Kinetic experiments and evaluation of the substituent effects of phosphine oxide revealed that phosphine oxide had beneficial effects on both the reaction rate and the enantioselectivity. The putative active species as well as the catalytic cycle of the reaction are also discussed.     

Direct catalytic asymmetric aldol reaction of hydroxyketones: asymmetric Zn catalysis with a Et(2)Zn/linked-BINOL complex

Full details of our newly developed catalyses with asymmetric zinc complexes as mimics of class II zinc-containing aldolase are described. A Et(2)Zn/(S,S)-linked-BINOL complex was developed and successfully applied to direct catalytic asymmetric aldol reactions of hydroxyketones. A Et(2)Zn/(S,S)-linked-BINOL 1 = 2/1 system was initially developed, which efficiently promoted the direct aldol reaction of 2-hydroxy-2'-methoxyacetophenone (7d). Using 1 mol % of (S,S)-linked-BINOL 1 and 2 mol % of Et(2)Zn, we obtained 1,2-dihydroxyketones syn-selectively in high yield (up to 95%), good diastereomeric ratio (up to 97/3), and excellent enantiomeric excess (up to 99%). Mechanistic investigation of Et(2)Zn/(S,S)-linked-BINOL 1, including X-ray analysis, NMR analysis, cold spray ionization mass spectrometry (CSI-MS) analysis, and kinetic studies, provided new insight into the active oligomeric Zn/(S,S)-linked-BINOL 1/ketone 7d active species. On the basis of mechanistic investigations, a modified second generation Et(2)Zn/(S,S)-linked-BINOL 1 = 4/1 with molecular sieves 3A (MS 3A) system was developed as a much more effective catalyst system for the direct aldol reaction. As little as 0.1 mol % of (S,S)-linked-BINOL 1 and 0.4 mol % of Et(2)Zn promoted the direct aldol reaction smoothly, using only 1.1 equiv of 7d as a donor (substrate/ligand = 1000). This is the most efficient, in terms of catalyst loading, asymmetric catalyst for the direct catalytic asymmetric aldol reaction. Moreover, the Et(2)Zn/(S,S)-linked-BINOL 1 = 4/1 system was effective in the direct catalytic asymmetric aldol reaction of 2-hydroxy-2'-methoxypropiophenone (12), which afforded a chiral tetrasubstituted carbon center (tert-alcohol) in good yield (up to 97%) and ee (up to 97%), albeit in modest syn-selectivity. Newly developed (S,S)-sulfur-linked-BINOL 2 was also effective in the direct aldol reaction of 12. The Et(2)Zn/(S,S)-sulfur-linked-BINOL 2 = 4/1 system gave aldol adducts anti-selectively in good ee (up to 93%). Transformations of the aldol adducts into synthetically versatile intermediates were also described.     

Preparation and properties of cyclopentadienyl- and pentamethylcyclopentadienyl-titanium(IV) complexes with the C8H4S8 ligand, electrical conductivities of their oxidized species, and X-ray crystal structure of Ti(C5Me5)2(C8H4S8)

Ti(C5H5)2(C8H4S8) (1), Ti(C5Me5)2(C8H4S8) (2), [NMe4][Ti(C5H5)(C8H4S8)2] (3), and [NMe4][Ti(C5Me5)(C8H4S8)2] (4) [C8H4S8(2-) = 2-(4,5-ethylenedithio)-1,3-dithiole-2-ylidene)-1,3-dithiole-4,5- dithiolate(2-)] were prepared by reaction of Ti(C5H5)2Cl2, Ti(C5Me5)2Cl2, Ti(C5H5)Cl3, or Ti(C5Me5)Cl3 with Li2C8H4S8 or [NMe4]2[C8H4S8] in THF. They were oxidized by iodine, the ferrocenium cation, or TCNQ (7,7,8,8-tetracyano-p-quinodimethane) in CH2Cl2 or in acetone to afford one-electron-oxidized and over-one-electron-oxidized species, [Ti(C5H5)2(C8H4S8)].I3, [Ti(C5H5)2(C8H4S8)][PF6], [Ti(C5Me5)2(C8H4S8)].I3, [Ti(C5Me5)2(C8H4S8)][PF6], [Ti(C5H5)(C8H4S8)2].I0.9, [Ti(C5H5)(C8H4S8)2][TCNQ]0.3, [Ti(C5Me5)(C8H4S8)2].I2.4, and [Ti(C5Me5)(C8H4S8)2][TCNQ]0.3, with the C8H4S8 ligand-centered oxidation. They exhibited electrical conductivities of 1.6 x 10(-1) to 7.6 x 10(-4) S cm-1 measured for compacted pellets at room temperature. The crystal structure of 2 was clarified to consist of isolated dimerized units of the molecules through some sulfur-sulfur nonbonded contacts: monoclinic, P2(1)/c, a = 9.534(2) A, b = 18.227(2) A, c = 17.775(2) A, beta = 94.39(1) degrees, Z = 4.     

New chiral ruthenium(II) catalysts containing 2,6-bis(4'-(R)-phenyloxazolin-2'-yl)pyridine (Ph-pybox) ligands for highly enantioselective transfer hydrogenation of ketones

Treatment of complex trans-[RuCl(2)(eta(2)-C(2)H(4))[kappa(3)-N,N,N-(R,R)-Ph-pybox]] [(R,R)-Ph-pybox = 2,6-bis[4'-(R)-phenyloxazolin-2'-yl]pyridine] with phosphines or phosphites in dichloromethane at 50 degrees C leads to the formation of novel ruthenium(II)-pybox complexes trans-[RuCl(2)(L)[kappa(3)-N,N,N-(R,R)-Ph-pybox]] [L = PPh(3) (1 a), PPh(2)Me (2 a), PPh(2)(C(3)H(5)) (3 a), PPh(2)(C(4)H(7)) (4 a), PMe(3) (5 a), PiPr(3) (6 a), P(OMe)(3) (7 a) and P(OPh)(3) (8 a)]. Likewise, reaction of trans-[RuCl(2)(eta(2)-C(2)H(4))[kappa(3)-N,N,N-(R,R)-Ph-pybox]] with PPh(3) or PiPr(3) in refluxing methanol leads to the complexes cis-[RuCl(2)(L)(kappa(3)-N,N,N-(R,R)-Ph-pybox] [L = PPh(3) (1 b), PiPr(3) (6 b)]. No trans-cis isomerisation of complexes 1 a-8 a has been observed. Complexes 1 a-8 a, 1 b, 6 b together with the analogous trans-[RuCl(2)[P(OMe)(3)][kappa(3)-N,N,N-(S,S)-iPr-pybox]] (10 a) and the previously reported trans- and cis-[RuCl(2)(PPh(3))[kappa(3)-N,N,N-(S,S)-iPr-pybox]] (9 a and 9 b, respectively) are active catalysts for the transfer hydrogenation of acetophenone in 2-propanol in the presence of NaOH (ketone/cat/NaOH 500:1:6). cis-Ph-pybox derivatives are the most active catalysts. In particular, cis complexes 1 b and 6 b led to almost quantitative conversions in less than 5 min with a high enantioselectivity (up to 95 %). A variety of aromatic ketones have also been reduced to the corresponding secondary alcohols with very high TOF and ee up to 94 %. The overall catalytic performance seems to be a subtle combination of the steric and/or electronic properties both the phosphines and the ketones. A high TOF (27 300 h(-1)) and excellent ee (94 %) have been found for the reduction of 3-bromoacetophenone with catalyst 6 b. Reductions of alkyl ketones also proceed with high and rapid conversions but low enantioselectivities are achieved.     

BINOLAM,a recoverable chiral ligand for bifunctional enantioselective catalysis: the asymmetric synthesis of cyanohydrins

[reaction: see text] A new bifunctional catalytic system based on a monometallic aluminum complex is used for the efficient enantioselective cyanation of aldehydes. The ligand (S)- or (R)-2,2'-bis(diethylaminomethyl)-substituted binaphthol (BINOLAM) used is recovered for recycling. This methodology is used for the synthesis of a precursor of epothilone A.     

Deactivation pathways of ethylene polymerization catalysts derived from titanium and zirconium 1,3-bis(furyl)-1,1,3,3-tetramethyldisilazide complexes

The stoichiometric reaction between the previously described lithium amide salts, LiN(SiMe2R)2 [Li{i}, R = furyl, Li{ii}, R = 2-methylfuryl] and titanium(iv)chloride at low temperature afforded the mono-amide compounds Ti{i}Cl3 (1a) and Ti{ii}Cl3 (1b). The analogous zirconium derivatives Zr{i}Cl3 (3a) and Zr{ii}Cl3 (3b) were accessed via the reaction of excess trimethylsilylchloride with the mixed tetra-amide species, Zr{i}(NMe2)3 (2a) and Zr{ii}(NMe2)3 (2b). The bis-amide complexes Ti{ii}2Cl2 (4b), Zr{i}2Cl2 (5a) and Zr{ii}2Cl2 (5b) were synthesized in a straightforward salt metathesis reaction employing two equivalents of Li{i} or Li{ii} with the metal salts, MCl4(THF)2. The reactivity of the halide compounds 1 and 3-5 with a variety of alkylating agents was studied, with ligand transfer from the transition-element to the main group metal-alkyl reagent being the predominant reaction pathway. The reaction of 4b with MeLi was, however, partially successful affording the titanium(III) complex, Ti{ii}2X (X = Cl/Me, 6b'); this compound was subsequently made as the pure chloride from the reaction of two equivalents of Li{iii} with TiCl3(THF)3. The targeted dialkyl species, Ti{ii}Me2 (7b), was successfully isolated from the reaction between the dichloride 4b and dimethylmagnesium. The molecular structures of 1a, 1b, [3a]2 [3b]2, 4b, 5b and 6b have been solved using single-crystal X-ray diffraction techniques, indicating varying nuclearity of the complexes and hapticities for the amide ligands in the solid-state. The catalytic activity of selected complexes in the polymerization of ethylene is reported.     

Synthesis of C1-symmetric chiral secondary diamines and their applications in the asymmetric copper(II)-catalyzed Henry (nitroaldol) reactions

A small library of C(1)-symmetric chiral diamines (L1-L9) was constructed via condensing exo-(-)-bornylamine or (+)-(1S,2S,5R)-menthylamine with various Cbz-protected amino acids. Among them, ligand L1/CuCl(2)·2H(2)O complex (2.5 mol %) shows outstanding catalytic efficiency for Henry reaction between a variety of aldehydes and nitroalkanes to afford the expected products in high yields (up to 98%) with excellent enantioselectivities (up to 99%) and moderate to good diastereoselectivities (up to 90:10). This process is air- and moisture tolerant and has been applied to the synthesis of (S)-2-amino-1-(3,4-dimethoxyphenyl)ethanol (9), a key intermediate for (S)-epinephrine and (S)-norepinephrine. On the basis of HRMS and X-ray diffraction analysis of the L1/CuCl(2) complex, a transition-state model was proposed to explain the origin of asymmetric induction. The low catalyst loading, excellent yields and enantioselectivities, inexpensive copper salt, and mild reaction conditions make our catalytic system to be practically useful.     

Titanium hydrazido and imido complexes: synthesis, structure, reactivity, and relevance to alkyne hydroamination

Treatment of Ti(NMe(2))(2)(dpma) (1) with aniline results in the protonation of the dimethylamido ligands, which are retained as dimethylamines, and generation of a titanium imido complex Ti(NPh)(NHMe(2))(2)(dpma) (2) in 94% yield. The monomeric imido 2 is converted to the reactive dimeric micro-imido [Ti(NPh)(dpma)](2) (3) on removal of the labile dimethylamine donors. The dimer 3 is converted to monomeric terminal imido complexes in the presence of added donors, e.g., 4,4'-di-tert-butyl-2,2'-bipyridine (Bu(t)-bpy) and DME. Compounds 1-3 exhibit the same rate constant for 1-phenylpropyne hydroamination by aniline and are all kinetically competent to be involved in the catalytic cycle. Attempts to use 1 as a catalyst for hydroaminations involving 1,1-dimethylhydrazine resulted in only a few turnovers under the best conditions. Consequently, the chemistry of 1 with hydrazines to generate hydrazido complexes was scrutinized for comparison with the imido species. Through these studies, titanium hydrazido complexes including Ti(eta(2)-NHNC(5)H(10))(2)(dpma) (5), Ti(eta(2)-NHNMe(2))(2)(dpma) (6), and [Ti(micro:eta(1),eta(2)-NNMe(2))(dpma)](2) (7) were characterized. In addition, a terminal hydrazido(2-) complex was available by addition of Bu(t)-bpy to 1 prior to 1,1-dimethylhydrazine addition, which provided Ti(eta(1)-NNMe(2))(Bu(t)-bpy)(dpma) (8). Compound 8 was structurally characterized and compared to Ti(NPh)(Bu(t)-bpy)(dpma) (4b), an imido derivative with the same ancillary ligand set. Compound 8 has a nucleophilic beta-nitrogen consistent with a hydrazido(2-) formulation, as determined by reaction with MeI to form the ammonium imido complex [Ti(NNMe(3))(Bu(t)-bpy)(dpma)]I (9). Analogous pyridinium imido complexes [Ti(N-1-pyridinium)(Bu(t)-bpy)(dpma)](+) (10) are available by addition of 1-aminopyridinium iodide to 1. From the investigations, some conclusions regarding the activity of titanium pyrrolyl complexes in hydroamination were drawn. The lack of conversion of the bis[micro-hydrazido(2-)] 7 to monomeric species in the presence of donor ligands is put forth as one explanation for the poor hydrazine hydroamination activity of 1. This problem was combated in the synthesis of Ti(NMe(2))(2)(dap)(2), which is an active catalyst for hydrazine hydroamination of alkynes.     

Asymmetric Cyanation of Aldehydes,Ketones, Aldimines,and Ketimines Catalyzed by a Versatile Catalyst Generated from Cinchona Alkaloid,Achiral Substituted 2,2′‐Biphenol and Tetraisopropyl Titanate

Full investigation of cyanation of aldehydes, ketones, aldimines and ketimines with trimethylsilyl cyanide (TMSCN) or ethyl cyanoformate (CNCOOEt) as the cyanide source has been accomplished by employing an in situ generated catalyst from cinchona alkaloid, tetraisopropyl titanate [Ti(OiPr)₄] and an achiral modified biphenol. With TMSCN as the cyanide source, good to excellent results have been achieved for the Strecker reaction of N‐Ts (Ts=p‐toluenesulfonyl) aldimines and ketimines (up to >99 % yield and >99 % ee) as well as for the cyanation of ketones (up to 99 % yield and 98 % ee). By using CNCOOEt as the alternative cyanide source, cyanation of aldehyde was accomplished and various enantioenriched cyanohydrin carbonates were prepared in up to 99 % yield and 96 % ee. Noteworthy, CNCOOEt was successfully employed for the first time in the asymmetric Strecker reaction of aldimines and ketimines, affording various α‐amino nitriles with excellent yields and ee values (up to >99 % yield and >99 % ee). The merits of current protocol involved facile availability of ligand components, operational simplicity and mild reaction conditions, which made it convenient to prepare synthetically important chiral cyanohydrins and α‐amino nitriles. Furthermore, control experiments and NMR analyses were performed to shed light on the catalyst structure. It is indicated that all the hydroxyl groups in cinchona alkaloid and biphenol complex with Ti^IV, forming the catalyst with the structure of (biphenoxide)Ti(OR*)(OiPr). The absolute configuration adopted by biphenol 4 m in the catalyst was identified as S configuration according to the evidence from control experiments and NMR analyses. Moreover, the roles of the protonic additive (iPrOH) and the tertiary amine in the cinchona alkaloid were studied in detail, and the real cyanide reagent in the catalytic cycle was found to be hydrogen cyanide (HCN). Finally, two plausible catalytic cycles were proposed to elucidate the reaction mechanisms.     

Mechanisms of catalyst poisoning in palladium-catalyzed cyanation of haloarenes. remarkably facile C-N bond activation in the [(Ph3P)4Pd]/[Bu4N]+ CN- system

Reaction paths leading to palladium catalyst deactivation during cyanation of haloarenes (eq 1) have been identified and studied. Each key step of the catalytic loop (Scheme 1) can be disrupted by excess cyanide, including ArX oxidative addition, X/CN exchange, and ArCN reductive elimination. The catalytic reaction is terminated via the facile formation of inactive [(CN)4Pd]2-, [(CN)3PdH]2-, and [(CN)3PdAr]2-. Moisture is particularly harmful to the catalysis because of facile CN- hydrolysis to HCN that is highly reactive toward Pd(0). Depending on conditions, the reaction of [(Ph3P)4Pd] with HCN in the presence of extra CN- can give rise to [(CN)4Pd]2- and/or the remarkably stable new hydride [(CN)3PdH]2- (NMR, X-ray). The X/CN exchange and reductive elimination steps are vulnerable to excess CN- because of facile phosphine displacement leading to stable [(CN)3PdAr]2- that can undergo ArCN reductive elimination only in the absence of extra CN-. When a quaternary ammonium cation such as [Bu4N]+ is used as a phase-transfer agent for the cyanation reaction, C-N bond cleavage in the cation can occur via two different processes. In the presence of trace water, CN- hydrolysis yields HCN that reacts with Pd(0) to give [(CN)3PdH]2-. This also releases highly active OH- that causes Hofmann elimination of [Bu4N]+ to give Bu3N, 1-butene, and water. This decomposition mode is therefore catalytic in H2O. Under anhydrous conditions, the formation of a new species, [(CN)3PdBu]2-, is observed, and experimental studies suggest that electron-rich mixed cyano phosphine Pd(0) species are responsible for this unusual reaction. A combination of experimental (kinetics, labeling) and computational studies demonstrate that in this case C-N activation occurs via an S(N)2-type displacement of amine and rule out alternative 3-center C-N oxidative addition or Hofmann elimination processes.     

Rhenium in homogeneous catalysis: [ReBrH(NO)(labile ligand)(large-bite-angle diphosphine)] complexes as highly active catalysts in olefin hydrogenations

The reaction of [ReBr(2)(MeCN)(NO)(P∩P)] (P∩P = 1,1'-bisdiphenylphosphinoferrocene (dppfc) (1a), 1,1'-bisdiisopropylphosphinopherrocene (diprpfc) (1b), 2,2'-bis(diphenylphosphino)diphenyl ether (dpephos) (1c), 10,11-dihydro-4,5-bis(diphenylphosphino)dibenzo[b,f]oxepine (homoxantphos) (1d) and 4,6-bis(diphenylphosphino)-10,10-dimethylphenoxasilin (Sixantphos) (1e)) led in the presence of HSiEt(3) and ethylene to formation of the ethylene hydride complexes [ReBrH(η(2)-C(2)H(4))(NO)(P∩P)] (3a,b,d), the MeCN ethyl complex [ReBr(Et)(MeCN)(NO)(dpephos)] (5c) and two ortho-metalated stereoisomers of [ReBr(η(2)-C(2)H(4))(NO)(η(3)-o-C(6)H(4)-Sixantphos)] 8e(up) and 8e(down). The complexes 3a,b,d, and 5c and the isomers of 8e showed high catalytic activity (TOFs ranging from 22 to 4870 h(-1), TONs up to 24000) in the hydrogenation of monosubstituted olefins. For 8e(down) and 8e(up) a remarkable functional group tolerance and catalyst stability were noticed. Kinetic experiments revealed k(obs) to be first order in c(cat) and c(H(2)) and zeroth order in c(olefin). Mechanistic studies and DFT calculations suggest the catalysis to proceed along an Osborn-type catalytic cycle with olefin before H(2) addition. The unsaturated key intermediates [ReBrH(NO)(P∩P)] (2a-e) could be intercepted with MeCN as [ReBrH(MeCN)(NO)(P∩P)] (10a-d) complexes or isolated as dimeric μ(2)-(H)(2) complexes [{ReBr(μ(2)-H)(NO)(P∩P)}(2)] (9b and 9e). Variation of the bidentate ligand demonstrated a crucial influence of the (large)-bite-angle on the catalytic performance and reactivity of 3a,b,d, 5c, and 8e.     

Highly efficient cyclization of o-iodobenzoates with aldehydes catalyzed by cobalt bidentate phosphine complexes: a novel entry to chiral phthalides

Methyl 2-iodobenzoates 1 a-c undergo cyclization reactions with various aromatic aldehydes 2 a-m (RC6H4CHO: R=H 2 a, 4-CH3 2 b, 4-tBu 2 c, 4-OMe 2 d, 3-OMe 2 e, 4-Cl 2 f, 4-CF3 2 g, 4-CN 2 h, 4-Ph 2 i; benzo[d][1,3]dioxole-5-carbaldehyde (2 j), 1-napthaldehyde (2 k), benzofuran-2-carbaldehyde (2 l), and isonicotinaldehyde (2 m)) in the presence of [CoI2(dppe)] (dppe=1,2-bis(diphenylphosphino)ethane) and Zn powder in dry THF at 75 degrees C for 24 h to give the corresponding phthalide derivatives 3 a-m and 3 q-t in good to excellent yields. Under similar reaction conditions, less reactive aliphatic aldehydes, heptanal (2 n), butyraldehyde (2 o), and 2-phenylacetaldehyde (2 p) also underwent cyclization reactions with 1 a to provide 3 n-p, respectively, in fair to good yields. The catalytic reaction can be further extended to cinnamyl aldehyde (2 q) with 1 a to give the corresponding phthalide derivative 3 u. This synthetic method is compatible with a variety of functional groups on the aryl ring of 2. The high efficiency of the cobalt catalyst containing a dppe (dppe=1,2-bis(diphenylphosphino)ethane) ligand encouraged us to investigate the asymmetric version of the present catalytic reaction by employing bidentate chiral ligands. Thus, aromatic aldehydes 2 a-c, 2 f, and 2 g undergo cyclization with 2-iodobenzoate (1 a) smoothly in the presence of [CoI2{(S,S)-dipamp}] ((S,S)-dipamp=(1S,2S)-(+)-bis[2-methoxyphenyl]phenylphosphino)ethane) and zinc powder in THF at 75 degrees C for 24 h, giving the corresponding (S)-phthalides 4 a-e in 81-89% yields with 70-98% ee. A possible mechanism for the present catalytic reaction is proposed.     

Rb(3)Ti(3)(P(4)S(13))(PS(4))(3) and Cs(2)Ti(2)(P(2)S(8))(PS(4))(2): two polar titanium thiophosphates with complex one-dimensional tunnels

The reactions of Ti with in situ formed polythiophosphate fluxes of A(2)S(3) (A = Rb, Cs), P(2)S(5), and S at 500 degrees C result in the formation of two new quaternary titanium thiophosphates with compositions Rb(3)Ti(3)(P(4)S(13))(PS(4))(3) (1) and Cs(2)Ti(2)(P(2)S(8))(PS(4))(2) (2). Rb(3)Ti(3)(P(4)S(13))(PS(4))(3) (1) crystallizes in the chiral hexagonal space group P6(3) (No. 173) with lattice parameters a = 18.2475(9) Angstrom, c = 6.8687(3) Angstrom, V = 1980.7(2) Angstrom(3), Z = 2. Cs(2)Ti(2)(P(2)S(8))(PS(4))(2) (2) crystallizes in the noncentrosymmetric monoclinic space group Cc (No. 9) with a = 21.9709(14) Angstrom, b = 6.9093(3) Angstrom, c = 17.1489(10) Angstrom, beta = 98.79(1) degrees, V = 2572.7(2) Angstrom(3), Z = 4. In the structure of 1 TiS(6) octahedra, three [PS(4)] tetrahedra, and the hitherto unknown [P(4)S(13)](6-) anion are joined to form two different types of helical chains. These chains are connected yielding two different helical tunnels being directed along [001]. The tunnels are occupied by the Rb+ ions. The [P(4)S(13)](6-) anion is generated by three [PS(4)] tetrahedra sharing corners with one [PS(4)] group in the center of the starlike anion. The P atoms of the three [PS(4)] tetrahedra attached to the central [PS(4)] group define an equilateral triangle. The [P(4)S(13)](6-) anion may be regarded as a new member of the [P(n)S(3n+1)]((n+2)-) series. The structure of Cs(2)Ti(2)(P(2)S(8))(PS(4))(2) (2) consists of the one-dimensional polar tunnels containing the Cs(+) cations. The rare [P(2)S(8)](4-) anion which is composed of two [PS(4)] tetrahedra joined by a S(2)(2-) anion is a fundamental building unit in the structure of 2. One-dimensional undulated chains being directed along [100] are joined by [PS(4)] tetrahedra to form the three-dimensional network with polar tunnels running along [010]. The compounds are characterized with IR, Raman spectroscopy, and UV/vis diffuse reflectance spectroscopy.     

New benzo[h]quinoline-based ligands and their pincer Ru and Os complexes for efficient catalytic transfer hydrogenation of carbonyl compounds

New benzo[h]quinoline ligands (HCN'N) containing a CHRNH2 (R=H (a), Me (b), tBu (c)) function in the 2-position were prepared starting from benzo[h]quinoline N-oxide (in the case of ligand a) and 2-chlorobenzo[h]quinoline (for ligands b and c). These compounds were used to prepare ruthenium and osmium complexes, which are excellent catalysts for the transfer hydrogenation (TH) of ketones. The reaction of a with [RuCl2(PPh3)3] in 2-propanol at reflux afforded the terdentate CN'N complex [RuCl(CN'N)(PPh3)2] (1), whereas the complexes [RuCl(CN'N)(dppb)] (2-4; dppb=Ph2P(CH2)4PPh2) were obtained from [RuCl2(PPh3)(dppb)] with a-c, respectively. Employment of (R,S)-Josiphos, (S,R)-Josiphos*, (S,S)-Skewphos, and (S)-MeO-Biphep in combination with [RuCl2(PPh3)3] and ligand a gave the chiral derivatives [RuCl(CN'N)(PP)] (5-8). The osmium complex [OsCl(CN'N)(dppb)] (12) was prepared by treatment of [OsCl2(PPh3)3] with dppb and ligand a. Reaction of the chloride 2 and 12 with NaOiPr in 2-propanol/toluene afforded the hydride complexes [MH(CN'N)(dppb)] (M=Ru 10, Os 14), through elimination of acetone from [M(OiPr)(CN'N)(dppb)] (M=Ru 9, Os 13). The species 9 and 13 easily reacted with 4,4'-difluorobenzophenone, via 10 and 14, respectively, affording the corresponding isolable alkoxides [M(OR)(CN'N)(dppb)] (M=Ru 11, Os 15). The complexes [MX(CN'N)(P2)] (1-15) (M=Ru, Os; X=Cl, H, OR; P=PPh3 and P2=diphosphane) are efficient catalysts for the TH of carbonyl compounds with 2-propanol in the presence of NaOiPr (2 mol %). Turnover frequency (TOF) values up to 1.8x10(6) h(-1) have been achieved using 0.02-0.001 mol % of catalyst. Much the same activity has been observed for the Ru--Cl, --H, --OR, and the Os--Cl derivatives, whereas the Os--H and Os--OR derivatives display significantly lower activity on account of their high oxygen sensitivity. The chiral Ru complexes 5-8 catalyze the asymmetric TH of methyl-aryl ketones with TOF approximately 10(5) h(-1) at 60 degrees C, up to 97 % enatiomeric excess (ee) and remarkably high productivity (0.005 mol % catalyst loading). High catalytic activity (TOF up to 2.2x10(5) h(-1)) and enantioselectivity (up to 98 % ee) have also been achieved with the in-situ-generated catalysts prepared from [MCl2(PPh3)3], (S,R)-Josiphos or (S,R)-Josiphos*, and the benzo[h]quinoline ligands a-c.