Production of Nisin Z by <Emphasis Type="Italic">Lactococcus lactis</Emphasis> Isolated from Dahi

Lactococcus lactis CM1, an isolate from homemade “Dahi,” a traditional fermented milk from India, used maltose as carbon source to produce a high level of bacteriocin. The bacterial cell mass and the bacteriocin production correlated with the initial pH of the medium and were highest when the initial pH was 11.0. The level of bacteriocin reached its peak at the late log phase with concomitant reduction of culture pH to 4.2, regardless of the initial pH of the medium. A combination of maltose and an initial medium pH of 11 resulted in the highest bacteriocin production. The antibacterial spectrum of the bacteriocin was closely similar to that of nisin and it inhibited a number of food spoilage and pathogenic bacteria. Upon sodium dodecyl sulfate polyacrylamide gel electrophoresis, the compound migrated close to the position of nisin (3.5 kDa). However, it had higher stability than nisin at a wide range of pH and temperature. PCR amplification using nisin gene-specific primers and sequencing of the amplified DNA revealed the structural gene for the bacteriocin to be identical to that of nisZ.     

Variable Volume Fed-Batch Fermentation for Nisin Production by <Emphasis Type="Italic">Lactococcus lactis</Emphasis> subsp<Emphasis Type="Italic">. lactis W28</Emphasis>

A feeding technology that was suitable for improving the nisin production by Lactococcus lactis subsp. lactis W28 was established. The effects of initial sucrose concentration (ISC) in the fermentation broth, feeding time, and feeding rate on the fermentation were studied. It was observed that a fed-batch culture (ISC = 10 g l⁻¹) with 100 ml sucrose solution (190 g l⁻¹) being evenly fed (9–10 ml h⁻¹) into the fermenter after 3-h fermentation gave the best performance in terms of biomass and nisin yield. Under these conditions, the total biomass and the total nisin yield were approximately 23% and 51% higher than those in batch fermentation, respectively. When the sucrose concentration was controlled at 5–10 g l⁻¹ in variable volume intermittent fed-batch fermentation (VVIF) with ISC = 10 g l⁻¹, the total biomass and the total nisin yield were 29% and 60% above those in batch fermentation, respectively. The VVIF proved to be effective to eliminate the substrate inhibition by maintaining sucrose at appropriate levels. It is also easy to be scaled up, since various parameters involved in industrial production were taken into account.     

Rapid molecular typing of <Emphasis Type="Italic">Tuber melanosporum</Emphasis>, <Emphasis Type="Italic">T. brumale</Emphasis> and <Emphasis Type="Italic">T. indicum</Emphasis> from tree seedlings and canned truffles

We have developed new DNA extraction and purification procedures for investigation of mycorrhized seedlings and canned truffles. Use of these procedures on approximately 100 mg initial material enabled good sample representation. For mycorrhized seedlings, Taq polymerase inhibitors were discarded irrespective of tree species. In routine analysis we systematically used consensus primers ITS1/ITS4 to check the absence of Taq polymerase inhibitors and the presence of fungus DNA. Positive response with ITS validates other positive or negative PCR results. Absence of amplification with ITS prevents validation of other results. For canned truffles, DNA harvested from ascocarps sterilized for one and a half hours at 115°C was amplified with specific primers. We have developed consensus primers, named R12/F12, to check for the presence of amplifiable fungus DNA and the absence of Taq polymerase inhibitors. Here also, positive response with consensus R12/F12 validates other positive or negative PCR results. We have developed one primer pair specific for T. brumale and another specific for T. melanosporum. We can then characterize these two taxa, which enables the use of truffle or truffled French designations. We can also characterize T. indicum, the Asiatic black truffle that might fraudulently be sold as T. melanosporum and T. brumale. These three specific primer pairs were used independently of DNA extraction from tree seedlings or canned truffles. Our process is specific, sensitive, convenient, and quick.J.P. Douet and D. Mabru have contributed equally to this work     

Synthesis of 6-methyl-8<Emphasis Type="Italic">H</Emphasis>-dibenzo[<Emphasis Type="Italic">a</Emphasis>,<Emphasis Type="Italic">g</Emphasis>]quinolizin-8-imines <Emphasis Type="Italic">via Reissert</Emphasis> compounds

Alkylation of Reissert compounds derived from 3-methylisoquinolines with several 2-cyanobenzylbromides followed by hydrolytic cleavage provided the corresponding 1-benzyl-3-methylisoquinolines. Treatment of the latter with methylmagnesiumiodide caused cyclization to the title compounds rather than formation of 2-acetylbenzylisoquinolines.     

Antioxidant flavonoids from <Emphasis Type="Italic">Tamus communis</Emphasis> ssp. <Emphasis Type="Italic">cretica</Emphasis>

A new flavonoid, kaempferol-3,4′-di-O-α-L-rhamnopyranoside (1), and three known flavonoids (2–4) were isolated from the aerial parts of T. communis L. The structure of the new compound was elucidated on the basis of spectroscopic data. Compounds 1 and 2 showed significant antioxidant activity (IC₅₀ 187.151 ± 0.821 μM, and 92.079±0.513 μM, respectively), whereas compounds 3 and 4 showed moderate activity in DPPH free radical scavenging assays. Published in Khimiya Prirodnykh Soedinenii, No. 3, pp. 295–297, May–June, 2009.     

Investigation of kernel oils of <Emphasis Type="Italic">Quercus robur</Emphasis> and <Emphasis Type="Italic">Quercus cerris</Emphasis>

The kernel oils of Quercus robur and Quercus cerris were obtained by Soxhlet extraction using petroleum ether. Oil yields were found to be 5.2–5.6% and 4.3–4.8% for Q. robur and Q. cerris kernel, respectively (expressed in g per 100 g of dried plant material). The physical and chemical constants, unsaponifiable matter and total fatty acids were determined. The total fatty acid composition of oils was determined by GC in the methyl ester form. Considering the composition and content of fatty acids, the examined kernel oils were very similar. Seven fatty acid components were identified in both oils: palmitic, stearic, arachidic, palmitoleic, oleic, linoleic, and -linolenic. In Q. robur and Q. cerris kernel oils the principal acids were oleic (44.3% and 43.0%, respectively) and linoleic (37.2% and 32.6%, respectively), followed by a significant amount of palmitic acid.Published in Khimiya Prirodnykh Soedinenii, No. 5, pp. 347–348, September–October, 2004.     

Chemical evaluation of seeded fruit biomass of oil pumpkin (<Emphasis Type="Italic">Cucurbita pepo</Emphasis> L. var. <Emphasis Type="Italic">Styriaca</Emphasis>)

Oil pumpkin (Cucurbita pepo L. var. Styriaca) is an economically important horticultural plant cultivated for oil production. After harvesting seeds, the residual biomass has a limited application and is usually left in the field. An experimental study was performed to evaluate the chemical composition of the seeded fruit oil pumpkin biomass (OP) dried by solvent-exchange using ethanol. The sugar composition of polysaccharides obtained by sequential extraction with water and dilute alkali indicated the prevalence of pectic polysaccharides. Hemicelulloses were released in higher amounts in the alkaline step. The chemical composition of OP and its individual tissues (peel, flesh and hairy flesh) was investigated and compared to the corresponding preparations of standard pumpkin (SP, Cucurbita pepo L.). The content of components (on oven-dry basis), calculated from the analysis data of the individual tissues, was estimated for OP: 7.9 % ash, 7.6 % Klason lignin, 19.3 % pectin (as uronic acids), 34.1 % neutral carbohydrates, and 27.4 % α-cellulose and for SP: 6.4 % ash, 4.0 % Klason lignin, 20.9% pectin (as uronic acids), 38.1% neutral carbohydrates, and 29.2 % α-cellulose, respectively. The OP biomass showed a higher proportion of hemicelluloses.     

Screening and Immobilization <Emphasis Type="Italic">Burkholderia</Emphasis> sp. GXU56 Lipase for Enantioselective Resolution of (<Emphasis Type="Italic">R</Emphasis>,<Emphasis Type="Italic">S</Emphasis>)-Methyl Mandelate

Microorganisms producing lipase were isolated from soil and sewage samples and screened for enantioselective resolution of (R,S)-methyl mandelate to (R)-mandelic acid. A strain designated as GXU56 was obtained and identified as Burkholderia sp. Preparing immobilized GXU56 lipase by simple adsorption on octyl sepharose CL-4B, the optimum temperature was shifted from 40 °C (free lipase) to 50 °C (immobilized lipase), and the optimum pH was shifted from 8.0 (free lipase) to 7.2 (immobilized lipase). The immobilized enzyme displayed excellent stability in the pH range of 5.0–8.0, at the temperatures below 50 °C and in organic solvents compared with free enzyme. Enantioselectivity ratio for (R)-mandelic acid (E) was dramatically improved from 29.2 to more than 300 by applying immobilized lipase in the resolution of (R,S)-methyl mandelate. After five cycles of use of immobilized lipase, conversion and enantiomeric excess of (R)-mandelic acid were 34.5% and 98.5%, respectively, with enantioselectivity ratio for (R)-mandelic acid (E) of 230. Thus, octyl-sepharose-immobilized GXU56 lipase can be used as a bio-resolution reagent for producing (R)-mandelic acid.     

New flavonoid-<Emphasis Type="Italic">C</Emphasis>-glycosides from <Emphasis Type="Italic">Triticum aestivum</Emphasis>

Two new flavonoid-C-glycosides named triticuside A (1a) and triticuside B (1b) were isolated from bran of Triticum aestivum L. The structures of the two new compounds were elucidated by spectral techniques including ¹H NMR, ¹³C NMR as well as HSQC, HMBC, and COSY. Published in Khimiya Prirodnykh Soedinenii, No. 2, pp. 135–137, March–April, 2008.     

Lipids from <Emphasis Type="Italic">Halostachys caspica</Emphasis> and <Emphasis Type="Italic">Halocharis hispida</Emphasis>

The composition of lipids from the aerial parts of two species of halophytes from the family Chenopodiaceae, Halostachys caspica C. A. Mey. and Halocharis hispida Bge. was determined. Neutral lipids (NL, 62.1 and 54.2%, respectively) dominated the total lipids (TL) of these plants. More than a third of the NL were esters of aliphatic alcohols and phytosterols (FAE). Fatty acids 16:0, 18:1, and 18:2 dominated the acids of FAE; 16:0, 18:1, and 18:3, the phospholipids. The principal fatty acids of glycolipids were unsaturated acids (68.3 and 75.1%) with linolenic acid dominating (44.9 and 43.5%). Presented at the 7th International Symposium on the Chemistry of Natural Compounds, Tashkent, October 16–18, 2007. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 276–278, May–June, 2009.     

Effects of <Emphasis Type="Italic">L</Emphasis>-Carnitine Supplementation in Sows

Summary. In recent years L-carnitine has been used increasingly in animals. This review gives an overview of the effects of dietary L-carnitine supplementation during pregnancy and lactation on the reproductive performance of sows. In one investigation L-carnitine supplementation during pregnancy increased the number of piglets born to sows. Other studies showed heavier litters in sows supplemented with L-carnitine compared with control sows, and litters of L-carnitine supplemented sows gained more weight during the suckling period than litters of control sows. This effect might be due to more vigorous suckling by piglets of L-carnitine supplemented sows, causing the sows’ milk production to rise. At negative energy balance during lactation L-carnitine supplemented sows are able to mobilize more energy from adipose tissue, which can be used for the production of surplus milk. In conclusion, recent studies clearly show that dietary L-carnitine supplementation increases the reproductive performance of sows. This finding suggests that the amount of L-carnitine synthesized endogenously does not cover the requirement for maximum sow performance during pregnancy and lactation.     

Alkaloids of <Emphasis Type="Italic">Arundo donax</Emphasis> L.

The structure of a new dimeric indole alkaloid, arundarine, isolated from the roots of the plant Arundo donax L. (Poaceae) was determined. On the basis of spectroscopic data, arundarine was identified as 5-[3-(2-dimethylaminoethyl)indol-1-yl]-6-hydroxy-N ²-methyl-1,2,3,4-tetrahydro--carboline.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1697–1699, August, 2004.For Part 14, see Ref. 1.     

Syntheses of (<Emphasis Type="Italic">E</Emphasis>)- and (<Emphasis Type="Italic">Z</Emphasis>)-3-styrylchromones

Several (E)- and (Z)-3-styrylchromones were prepared by two different methodologies, the Wittig reaction of chromone-3-carboxaldehyde with benzylic ylides and the Knoevenagel condensation of chromone-3-carboxaldehyde with phenylacetic acids in the presence of potassium tert-butoxide under microwave irradiation. The Knoevenagel reaction followed by a decarboxylation offered an efficient and diastereoselective method for preparing (E)-3-styrylchromones in a shorter reaction time. It was also demonstrated that phenylacetic acid can also be substituted with success by phenylmalonic acid. The stereochemistry of all products was assigned by NMR experiments. Correspondence: Artur M. S. Silva, Chemistry Department, University of Aveiro, 3810-193 Aveiro, Portugal.     

An efficient <Emphasis Type="Italic">Mannich</Emphasis>-type synthesis of <Emphasis Type="Italic">bis</Emphasis>(pyrido[2,1-<Emphasis Type="Italic">b</Emphasis>][1,3,5]thiadiazin-7-yl)-methanes

Morpholinium 3-cyano-4-methyl-6-oxo-1,6-dihydropyridine-2-thiolate upon treatment with primary amines and a formaldehyde excess under mild conditions produces bis(pyrido[2,1-b][1,3,5]thiadiazin-7-yl)methane derivatives in good yields (67–87%). Correspondence: Victor V. Dotsenko, State Enterprise “Luganskstandartmetrology”, 91021 Lugansk, Ukraine.     

Polyploid Formation Between <Emphasis Type="Italic">Aspergillus niger</Emphasis> and <Emphasis Type="Italic">Trichoderma viride</Emphasis> For Enhanced Citric Acid Production From Cellulose

The first-stage heterokaryons, obtaining from intergeneric protoplast fusion between Aspergillus niger (Y-b) and Trichoderma viride (M5S51), showed slow growth and mixed morphologies on minimal medium. The fusants were classified into heterokaryon and prototrophic haploid, showing the morphology as that of A. niger. The heterokaryon strains formed conidia with the same nutritional requirements as those of the original auxotrophic mutant strains. After several subcultivations on minimal medium containing d-camphor, some heterokaryon strains formed larger two to seven nuclei/conidium as compared to one nucleus/conidium of the auxotrophic mutant and prototrophic strains, indicating that the new hybrids were generated. Interestingly, three fusant strains AT 11-2-3, AT 11-2-10, and AT 11-2-14 produce 19.2, 6.1, and 10.5 g/l citric acid, respectively, in semisolid culture containing cellulose, whereas A. niger Yang no. 2 could not use carboxymethyl cellulose as the sole carbon source for citric acid production. In addition, the average maximum beta-glucosidase and carboxymethylcellulase productions from AT 11-2-3, AT 11-2-10, and AT 11-2-14 were about 16- and 4-folds higher than those of A. niger, respectively.     

Two new isoflavonoid monogalactosides from <Emphasis Type="Italic">Trifolium pratense</Emphasis> roots

Formononetin and the new isoflavonoid glycosides formononetin-7-O-β-D-galactopyranoside and inermin-3-O-β-D-galactopyranoside were isolated from Trifolium pratense L. roots. The structures of the isolated compounds were proved using chemical transformations and UV, PMR, and ¹³C NMR spectra. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 21–23, January–February, 2008.     

Splitting of the <Emphasis Type="Italic">d</Emphasis><Superscript><Emphasis Type="Italic">N</Emphasis></Superscript> atomic states in icosahedral 3<Emphasis Type="Italic">d</Emphasis> metal endofullerenes M@C<Subscript>60</Subscript>

Group-theoretical and quantum-chemical investigations of the spectrum of low-lying excited states have been performed by the ROHF and FCI-RAS (Full CI in Restricted Active Space) methods for 3d metal endofullerenes (MEFs) M@C₆₀ (M =Mn, Cr, and Fe) in different charged states. The major purpose of this study is quantum-chemical verification of the anomalous (“non-Bethe’s”) character of splitting of the d ^N atomic states in an electrostatic field with icosahedral symmetry, predicted previously within the theory of integral invariants theory. The interrelation between the integral invariants theory and the quantumchemical methods applied in this work is considered in detail. Our calculations suggest that the d ^N atomic states in the icosahedral field generated by fullerene C60 (I _h ) on a metal atom (ion) remain non-split for different charged states of the metal and C₆₀. Reasons for this phenomenon and other possible approaches to verification of the prediction are discussed. It is demonstrated that the d ^N states of the encapsulated metal are split in icosahedral 3d MEFs only under very strong compression of these structures.     

A new C-glucoside from <Emphasis Type="Italic">Commelina communis</Emphasis>

A new C-glucoside, 3,4-epoxy-5-hydroxymethyl benzoate 2-C-β-glucoside (1), together with a known alkaloid, 1H-indole-3-carbaldehyde (2), were isolated from the whole plant of Commelina communis L. The structures of these compounds were determined by 1D, 2D NMR and MS techniques. Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 51–52, January–February, 2009.     

Crystal and molecular structure of <Emphasis Type="Italic">tris</Emphasis>(<Emphasis Type="Italic">m</Emphasis>-chlorophenyl)phosphine selenide

The crystal and molecular structure of tris(m-chlorophenyl)phosphine selenide, C₁₈H₁₂Cl₃PSe (I), was investigated by X-ray diffraction (XRD) analysis. The trigonal rhombohedral structure of I (space group \(R\overline 3 c\), a = 14.110(2) Å, c = 32.360(4) Å, Z = 12) was solved by direct methods and refined by least squares in an anisotropic approximation (R = 0.029) for 1319 averaged measured reflections (CAD-4 automatic diffractometer, λCuK_α).     

Functional Expression of <Emphasis Type="Italic">Bacillus anthracis</Emphasis> Protective Antigen in <Emphasis Type="Italic">E. coli</Emphasis>

The protective antigen (PA) of Bacillus anthracis is a potent immunogen and an important candidate vaccine. In addition, it is used in monitoring systems like enzyme-linked immunosorbent assay to assess antibodies against PA in immunized subjects. The low level of PA production in B. anthracis and the difficulty of separating it from other bacterial components have made the researchers do different studies with the aim of producing recombinant PA (rPA). In this study, to produce rPA as a recombinant protein vaccine, the partial sequence of protective antigen of B. anthracis, amino acids 175–764, as a potent immunogenic target was inserted in pET21b(+). This is a prokaryotic plasmid that carries an N-terminal T7.tag sequence. The integrity of constructed plasmid was confirmed using restriction enzyme mapping. rPA was expressed after induction with isopropyl β-d-1-thiogalactopyranoside in Escherichia coli BL21. Purification of rPA was done with an affinity system using anti T7.tag antibody. Electrophoresis and Western blotting confirmed the specificity of the expressed protein. BALB/c mice were immunized with obtained PA protein and evaluation of specific immunoglobulin G antibodies against PA in sera using Western blotting method and showed that rPA is immunogenic. The challenge of immunized mice with virulent strain of B. anthracis showed that rPA is functional to protect against pathogenic strain.