Microchemical determination of nine rare earth elements in silicate rocks by cation-exchange preconcentration — Ion-interaction chromatography

Summary A method of applying ion-interaction chromatography to the determination of the rare earth elements in silicate rocks on a 100 to 200 mg sample basis has been developed. The rare earths are first separated as a group from matrices by cation-exchange chromatography in hydrochloric acid-thiocyanate media and isolated in a small, defined volume (3.00 ml). Using fractions of this, on-column concentration of the rare earths on a C-18 bonded phase silica coated with 1-octanesulfonate and a subsequent concentration gradient elution with glycolate (0.05 to 0.35 M) at pH 3.5 allows the respective separation of La, Ce, Pr, Nd, and Y (100 l aliquot used) and of Er, Tm, Yb, and Lu (2.00 ml aliquot used). Sm, Eu, Gd, Tb, and Dy elute together, and Ho is not sufficiently well resolved from these middle rare earth elements. The eluted rare earth elements are detected and quantified by post-column reaction with Arsenazo III photometrically, using a UV-VIS spectrophotometer at a wavelength of 650 nm. The method is shown to be capable of determining nine of the rare earth elements in a variety of international reference rock samples with good precision and accuracy.     

Analysis of wines by ICP-MS: Is the pattern of the rare earth elements a reliable fingerprint for the provenance?

In a comparative analysis of young and finished product wines by semi-quantitative ICP-MS, a striking difference was observed: finished products exhibited significant concentrations of the rare earth elements whereas the concentrations in young wines which had not been subdued to any treatment after their initial preparation from the grapes were below the determination limits with a quadrupole instrument and could only be determined with a magnetic field instrument operated at a low mass resolution (R = 300). The reason was found in contamination from bentonites as usually applied for the purification of wines from tarnishing components such as proteins. Therefore, bentonites of different origin were extracted with a reference wine, and an increase of the rare earth element concentrations by more than one order of magnitude was observed in the extracts. The investigation leads to the conclusion that the concentration pattern of the rare earth elements can be strongly affected by the wine producing process and therefore is not generally suitable as a fingerprint for the provenance of wines. Received: 3 December 1998 / Revised: 11 February 1999 / Accepted: 18 February 1999     

Analysis of wines by ICP-MS: Is the pattern of the rare earth elements a reliable fingerprint for the provenance?

In a comparative analysis of young and finished product wines by semi-quantitative ICP-MS, a striking difference was observed: finished products exhibited significant concentrations of the rare earth elements whereas the concentrations in young wines which had not been subdued to any treatment after their initial preparation from the grapes were below the determination limits with a quadrupole instrument and could only be determined with a magnetic field instrument operated at a low mass resolution (R = 300). The reason was found in contamination from bentonites as usually applied for the purification of wines from tarnishing components such as proteins. Therefore, bentonites of different origin were extracted with a reference wine, and an increase of the rare earth element concentrations by more than one order of magnitude was observed in the extracts. The investigation leads to the conclusion that the concentration pattern of the rare earth elements can be strongly affected by the wine producing process and therefore is not generally suitable as a fingerprint for the provenance of wines.     

Off-line separation and determination of rare earth elements associated with chloroplast pigments of hyperaccumulator Dicranopteris dichotoma by normal-phase liquid chromatography and ICP–MS

An off-line normal-phase liquid chromatography–ICP–MS method has been used for separation and determination of the rare earth elements (REE) associated with chloroplast pigments of Dicranopteris dichotoma. The stability of REE-bound pigments was tested, and almost no destruction of REE-bound pigments occurred during the so-called normal-phase liquid chromatography. The accumulated free REE ions on the microcrystalline cellulose column were cleaned by elution with 5 mmol L^–1 2-ethylhexyl hydrogen 2-ethylhexylphosphonate (P507), to avoid exchange of these free ions with metals from the pigments. When these precautions were taken, the method was applied to the study of REE-bound pigments in D. dichotoma. ICP–MS results showed REE were present in chlorophylls and lutein, although REE concentrations in carotene and pheophytin were both below procedural blank levels. By careful analysis of the eluate fractions containing chlorophyll a it was found that REE-bound chlorophyll a in D. dichotoma was slightly enriched in the fractions with relatively short retention time. Results indicated that the retention time of REE-bound chlorophyll a might be slightly less than that of magnesium chlorophyll a, and REE-bound chlorophylls might be of relatively low polarity in comparison with magnesium bound chlorophylls. This phenomenon could be explained by the special double-decker sandwich-structure of REE-bound chlorophylls, as was reported by us and other authors. On the basis of these results we preferred to consider that REE can replace magnesium in chlorophyll a of D. dichotoma, and that the role of REE-bound chlorophylls in photosynthesis cannot be neglected. These data might be useful for understanding of both the properties of REE-bound pigments and the effect of REE on plant photosynthesis.     

Inductively coupled plasma atomic emission spectroscopic determination of rare earth elements in geological samples after preconcentration by countercurrent chromatography—Part II

This paper directly links up with Part I [Spectrochim. Acta 48B, 1365 (1993)] which treats the first application of countercurrent chromatography (CCC) for pre-separation of rare earth elements (REE) in rocks. The rapid and reliable separation and pre-concentration of “light” REE and Y can be achieved using a system of 0.5 mol/l di-2-ethylhexylphosphoric acid (D2EHPA) in n-decane-hydrochloric acid of different concentrations and a planetary centrifuge as a CCC device. However, Tm, Yb and Lu are partially retained in the stationary phase. Comparative data is presented on three other two-phase liquid systems containing trioctylphosphine oxide (TOPO); D2EHPA and TOPO mixtures and diphenyl(dibutylcarbamoylmethylphosphine)oxide (Ph₂-Bu₂) as extractants in terms of their ability for whole REE group complete isolation from the rock constituents. The partial losses of “light” REE (La and Ce) occurred in the system of 0.1 mol/l solution of TOPO in isobutylmethylketone (IBMK) (stationary phase)-1 mol/l NH₄NO₃-6 mol/l HCl aqueous solutions (mobile phase). Complete isolution of the entire REE group can be reached in two systems: 0.3 mol/l D2EHPA + 0.02 ml/l TOPO in the solvents mixture (3:1) of n-decane + IBMK, respectively (stationary phase)-1 mol/l NH₄NO₃-6 mol/l HCl aqueous solution (mobile phase), and 1.0 mol/l Ph₂-Bu₂ solution in chloroform (stationary phase)-3 mol/l HNO₃ aqueous solution (mobile phase). The D2EHPA + TOPO mixture is recommended as more economic and accessible.     

Spectral interferences in the determination of traces of scandium,yttrium and rare earth elements in “pure” rare earth matrices by inductively coupled plasma atomic emission spectrometry Part III. Europium

This paper is the third part of a series of papers dealing with spectral interferences of rare earth elements (REEs) in inductively coupled plasma atomic emission spectrometry (ICP-AES). The present article shows: (a) the spectral data of europium interferent for 200 pm wide windows centred (±100 pm) about prominent lines of scandium, yttrium and REEs; (b) the database of Q values for line interference (Q_l) and Q values for (wing) background interference (Q_w); (c) the detection limits measured by using the “true detection limit” criterion as proposed by P.W.J.M. Boumans and J.J.A.M. Vrakking (Spectrochim. Acta Part B, 42 (1987) 819; 43 (1988) 69). Different possibilities for improvement of the true detection limits are discussed: the use of equipment of high resolving power, the application of multicomponent analysis (MCA) techniques and preliminary separation of the matrix component combined with preconcentration of trace REEs. This article is an electronic publication in Spectrochimica Acta Electronica (SAE), the electronic section of Spectrochimica Acta Part B (SAB). The hard copy text is accompanied by a disk with data and text files. The data files comprise in particular the tabular material of this article in electronic form.     

Development of a procedure for the multi-element determination of trace elements in wine by ICP–MS

An inductively coupled plasma mass spectrometric (ICP–MS) procedure has been developed for the determination of trace elements in wine. The procedure consists in simple 1+1 dilution of the wine and semi-quantitative analysis (without external calibration) using In as internal standard. Thirty-one elements at concentrations ranging from 0.1 mg mL^–1 to 0.5 ng mL^–1 can be determined by ICP–MS analysis with and without digestion. It was investigated whether a matrix effect observed for EtOH in the wine matrix can be overcome by application of a micro-concentric nebulizer with a membrane desolvator (MCN 6000). The results obtained for the MCN 6000 are compared with those obtained by use of a conventional Meinhard nebulizer. It is shown that the observed matrix effect can only be compensated by use of an internal standard for the Meinhard nebulizer, but not for the MCN 6000. Results for ICP–MS are compared with those obtained by total reflection X-ray fluorescence spectrometry (TXRF).     

A new type of combustion tube for carbon-hydrogen determination by the “rapid combustion method”

Summary Using the empty tube technique based on earlier work ofIngram, a new type of combustion tube has been designed. The horizontal combustion tube is maintained. Halogen and sulphur oxides are absorbed by electrolytic silver wool.The nitrogen oxides are absorbed by manganese dioxide in a slightly modified absorber.

---

Zusammenfassung Ein neues, horizontales Verbrennungsrohr für die Methode mit leerem Rohr nachIngram wird vorgeschlagen. Schwefeloxyde und Halogene werden an elektrolytischer Silberwolle absorbiert. Der mit Mangandioxyd gefüllte Absorptionsapparat für Stickstoffoxyde wurde etwas abgeändert.

---

Résumé Utilisant la technique du « tube vide » d'après le travail antérieur deIngram, l'auteur à mis au point un nouveau type de tube à combustion. Le tube à combustion horizontal est conservé. Les halogènes et les oxydes du soufre sont absorbés par de la laine d'argent « électrolytique ». Les oxydes de l'azote sont absorbés par du bioxyde de manganèse dans un absorbeur légèrement modifiée.

     

Thermal investigation of heavy crude oil by simultaneous TG–DSC–FTIR and EDXRF

Present study investigates thermal behavior of two heavy crude oils with different °API values by simultaneous thermogravimetry–differential scanning calorimetry–fourier transform infrared spectroscopy (TG–DSC–FTIR), and an evaluation of the chemical element levels present in the oils’ ashes was done by energy dispersive X-ray fluorescence spectrometry. TG and DSC curves were obtained for two samples in nitrogen atmosphere. Among all inorganic components evaluated, the highest concentration in the two oils was SO₃. Thus this study may contribute to a better understanding of the thermal behavior of heavy crude oils and their composition.     

Spectrometric methods for the determination of chlorine in crude oil and petroleum derivatives — A review

Chlorine determination in crude oil is made in order to guarantee that the oil does not contain levels of this element that might cause damages in the oil processing equipment. In petroleum products, the determination of chlorine is made, for instance, to evaluate if there are proper concentrations of organochloride compounds, which are used as additives. Such determinations are currently performed following official guidelines from the ASTM International and from the United States Environmental Protection Agency as well as protocols indicated by the Universal Oil Products. X-ray fluorescence spectroscopy plays an important role in many of these official methods. In contrast, other spectrometric methods based on optical and mass detection are plagued by limitations related to both the fundamental characteristics of non-metals and to the complex sample matrices, which reflects in the small number of articles devoted to these applications. In this review, the current status of the spectrometric methods, especially the role played by X-ray fluorescence spectrometry, is evaluated in terms of the determination of chlorine in crude oil and petroleum derivatives. Comparison of the performance of the methods, limitations and potential new approaches to ensure proper spectrometric determinations of chlorine is indicated.     

Two types of rare earth–organic frameworks constructed by racemic tartaric acid

Hydrothermal reactions of rare earth oxides with racemic tartaric acid (H₂tar) yielded 7 rare earth(III) MOFs with general formulas [R₂(tar)₃(H₂O)₂]_n (R=Y (1), Sm (4), Eu (5), Tb (6), Dy (7)) and [R₂(tar)₂(C₂O₄)(H₂O)₂]_n·4nH₂O (R=La (2), Nd (3)). X-ray powder diffraction analysis and single-crystal X-ray diffraction analysis reveal that they present two different structural types. MOFs 1, 4, 5, 6 and 7 are isostructural and crystallize in the orthorhombic non-centrosymmetric space group Iba2, and feature unusual fsc-3,4-Iba2 topology. MOFs 2 and 3 are isostructural and crystallize in monoclinic P2₁/c space group and display rare fsx-4,5-P2₁/c topology containing hydrophilic channels bounded by triple helical chains along a axis. MOFs 3, 4, 5, 6 and 7 exhibit intense lanthanide characteristic photoluminescence at room temperature.     

Spectral interferences in the determination of traces of scandium,yttrium and rare earth elements in ‘pure’ rare earth matrices by inductively coupled plasma atomic emission spectrometry:: Part VI—Ytterbium

The present article is the sixth part in a series of papers discussing the spectral interferences of rare earth elements (REEs) in inductively coupled plasma atomic emission spectrometry (ICP-AES). The spectral interferences in the presence of ytterbium as interferent for 200-pm-wide windows centered (±100 pm) around the prominent lines of scandium, yttrium and REEs were investigated. The quantification of the interferences in terms of Q-value for line interference Q_I(λ_a) and Q-values for wing background interference Q_W(Δλ_a) was used in accordance with Boumans and Vrakking [Spectrochim. Acta Part B 42 (1987) 819; Spectrochim. Acta Part B 43 (1988) 69]. The excitation temperature, T_exc=7200 K was chosen as the optimal in the determination of traces of REEs in Yb₂O₃.     

Mapping of rare earth elements in nuclear waste glass–ceramic using micro laser-induced breakdown spectroscopy

A micro-LIBS system was set up based on a quadruple Nd:YAG laser at 266 nm coupled with a microscope. Elemental mapping was performed on a Mo-rich glass–ceramic sample containing CaMoO₄ crystallites hundreds of microns in length and about 25 μm in section diameter. The topography of single-shot laser-induced craters was characterized using an atomic force microscope (AFM), which revealed a crater size less than 7 μm. Mappings of Mo, Ca, Sr, Al, Fe, Zr and rare earth elements such as Eu, Nd, Pr and La were undertaken. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was conducted to validate the micro-LIBS analysis. Principal components analysis calculation was used to investigate the correlation of elements in the two phases of glass–ceramic. Correlation between Ca, Sr, rare earth elements and Mo indicates their preferential incorporation into the calcium molybdate crystalline phase. Anti-correlation between Fe, Zr, Al and Mo revealed their affinity to the glass phase.     

Pt–rare earth catalysts for ethanol electrooxidation: modification of polyol synthesis

Journal of Solid State Electrochemistry - Pt–Ln/C (Ln = La, Ce, Pr, and Eu) catalysts were obtained by using a modification of the polyol method and tested for ethanol oxidation. Transmission...     

Example of a technique for evaluation of interferences caused by complicated sample matrix elements in ICP–AES determination

An example of a useful and rapid procedure for the evaluation of interferences caused by complicated sample matrices in inductively coupled plasma atomic emission spectrometry (ICP–AES) is described. Using simple acid–base standards, all the elements investigated were determined separately in complicated matrices with satisfactory results. Multiple linear regression was used to calculate the linear correction coefficients for each matrix element analyzed. Good analytical results improved still further when this correction method was used.     

Direct μ-flow injection isotope dilution ICP-MS for the determination of heavy metals in oil samples

The determination of trace elements in oil samples and their products is of high interest as their presence significantly affects refinery processes and the environment by possible impact of their combustion products. In this context, inductively coupled plasma mass spectrometry (ICP-MS) plays an important role due to its outstanding analytical properties in the quantification of trace elements. In this work, we present the accurate and precise determination of selected heavy metals in oil samples by making use of the combination of μ-flow direct injection and isotope dilution ICP-MS (ICP-IDMS). Spike solutions of ⁶²Ni, ⁹⁷Mo, ¹¹⁷Sn and ²⁰⁶Pb were prepared in an organic solvent, mixed directly with the diluted oil samples and tested to be fit for purpose for the intended ID approach. The analysis of real samples revealed strong matrix effects affecting the ICP-MS sensitivity, but not the isotope ratio measurements, so that accurate results are obtained by ICP-IDMS. Typical relative standard deviations were about 15% for peak area and peak height measurements, whereas the isotope ratios were not significantly affected (RSD < 2%). The developed method was validated by the analysis of a metallo-organic multi-element standard (SCP-21, typically applied as a calibration standard) and the standard reference material SRM1084a (wear metals in lubricating oil). The obtained results were in excellent agreement with the certified values (recoveries between 98% and 102%), so the proposed methodology of combining μ-flow direct injection and ICP-IDMS can be regarded as a new tool for the matrix-independent, multi-element and reliable determination of trace elements in oil and related organic liquids.     

Simultaneous determination of five synthetic antioxidants in edible vegetable oil by GC–MS

A simple, quick and nontoxic analytical method for the simultaneous determination of five synthetic antioxidants [t-butyl-4-hydroxyanisole (BHA), 2,6-di-t-butyl-hydroxytoluene (BHT), t-butyl hydroquinone (TBHQ), ethoxyquin (EQ) and 2,6-di-tert-butyl-4-hydroxymethyl-phenol (Ionox 100)] in edible vegetable oil has been developed. The analytes were extracted by ethanol, then separated and detected by GC–MS. Extraction conditions such as volume of ethanol required, mixing time and number of extractions were investigated and optimized by an orthogonal array experimental design. The five compounds behaved linearly in the 0.100∼20.0 mg/L concentration range, and the limits of detection (LOD) for BHA, BHT, TBHQ, EQ and Ionox-100 were 1.00, 0.92, 11.5, 0.83 and 1.39 μg/L, respectively. The recoveries at the tested concentrations of 1.00, 20.0 and 100 mg/kg were 75.6∼123%, with coefficients of variation <10.0%. The proposed procedure was successfully applied to the simultaneous analysis of the five antioxidants in soybean oil, tea oil, edible blended oil, rap oil, peanut oil, peanut blended oil and sesame oil samples purchased from local supermarkets.     

Development of an analytical procedure for the determination of polybrominated diphenyl ethers in environmental water samples by GC–ICP-MS

Polybrominated diphenyl ethers (PBDEs) are flame retardants, which due to their widespread use are frequently present as pollutants in the environment. In the EU Water Framework Directive (WFD) six PBDE congeners (BDE 28, BDE47, BDE 99, BDE 100, BDE 153 and BDE 154) are listed as priority substances. The uncertainty of the analytical method used for their determination in water samples at environmental quality standard (EQS) level (0.5 ng L⁻¹ for the ΣPBDEs) should be equal or less than 50% and the limit of quantification (LOQ) for ΣPBDEs below 0.15 ng L⁻¹. To meet these requirements, an analytical procedure for the determination of these six PBDEs in environmental water samples by gas chromatography–inductively coupled plasma mass spectrometry (GC–ICP-MS) was developed. The acidification of water samples to pH 2 maintained the stability of PBDEs for at least 20 days. The use of Tris–citrate buffer enabled efficient desorption of PBDEs from suspended particulate matter (SPM) and humic acids (HA), and their further quantitative solvent extraction into 2 mL of iso-octane. When 300 mL of water sample was used for analysis and the organic phase concentrated to 25 μL, the expanded uncertainty for determination of PBDEs at EQS level was found to be around 40% (a coverage factor for a confidence level of 95%, k = 2), and the LOQ for the ΣPBDEs 0.109 ng L⁻¹. Finally, to demonstrate the applicability of the newly developed GC–ICP-MS procedure, PBDEs were determined in river and sea water samples.     

Extraction of vanadyl porphyrins in crude oil by inclusion dispersive liquid–liquid microextraction and nano-baskets of calixarene

The novelties of this approach are introducing the self-settled dispersive liquid–liquid microextraction technique to remove the centrifuging step, conducting the dispersive liquid–liquid microextraction in complex organic systems, applicability of water as disperser phase, and inclusion microextraction of charged porphyrins by nano-baskets of calix[4]arenes, which act as the settling agents as well as the inclusion ligands. Diacid p-tert-butylcalix[4]arene in the cone conformation was synthesized and used. The related parameters including ligand concentration, volume of water disperser, salt effect, and extraction time were optimized. The linear range, detection limit (S/N?=?3) and precision (RSD, n?=?6) were determined to be 0.2–50, 0.07?μg?L^?1 and 5.3%, respectively. The established method was applied to determine the target compound in five samples of live crude oil, were sampled from an Iranian offshore field. Owing to the overall differences (such as organic media, inclusion extraction, water-soluble ligands, etc.), the comparison of the proposed method with the traditional liquid–liquid microextraction was inapplicable. These results revealed that the new approach is competitive analytical tool and an alternative of the traditional methods in the crude oil and related systems. Moreover, in those systems that the inclusion separation is not requested, it is possible to use a tertiary system including a proper extraction agent/solvent and calixarene phase, as settling agent, along with the aqueous disperser in the organic systems.