Selenium speciation analysis using inductively coupled plasma-mass spectrometry

Selenium exists in several oxidation states and a variety of inorganic and organic compounds, and the chemistry of selenium is complex in both the environment and living systems. Selenium is an essential element at trace levels and toxic at greater levels. Interest in speciation analysis for selenium has grown rapidly in this last decade, especially in the use of chromatographic separation coupled with inductively coupled plasma-mass spectrometry (ICP-MS). Complete characterization of selenium compounds is necessary to understand selenium's significance in metabolic processes, clinical chemistry, biology, toxicology, nutrition and the environment. This review describes some of the essential background of selenium, and more importantly, some of the currently used separation methodologies, both chromatographic and electrophoretic, with emphasis on applications of selenium speciation analysis using ICP-MS detection.     

Employing multivariate calibration for the determination of radionuclides by inductively coupled plasma-mass spectrometry

A method for the simultaneous ICP-MS determination of α- and β-emitting radionuclides in acid digested samples of concrete without further sample pretreatment is presented. Spectral and non-spectral interferences are corrected for by combining systematic internal standardization with bilinear multivariate calibration. Consequently, especially for radionuclides with long half-lives, ICP-MS is an alternative to radiometric analytical methods. The optimal multivariate calibration approach is the PLS1-model with preselected variables.     

Dry ashing of organic rich matrices with palladium for the determination of arsenic using inductively coupled plasma-mass spectrometry

A dry ashing procedure is developed for the determination of As in organic rich matrices such as wheat flour, lichen and tobacco leaves. The volatility of As during dry ashing is avoided by the addition of palladium nitrate [Pd(NO₃)₂]. The recovery of both As(III) and As(V) is found to be near quantitative. The residue after dry ashing is dissolved in nitric acid (HNO₃) and analysed by inductively coupled plasma-mass spectrometry (ICP-MS). The process blank and limit of detection (LOD) are 11 and 6.6 ng g⁻¹, respectively. The procedure is applied for the determination of As in certified reference materials namely wheat flour NIST SRM 1567a (National Institute of Standards and Technology Standard Reference Material), lichen BCR CRM 482 (Institute for Reference Materials, European Commission) and Virginia tobacco leaves CTA-VTL-2 (Poland Academy of Sciences). The results obtained by the present procedure are in good agreement with the certified values and also determined after complete dissolution of samples using closed microwave digestion.     

Effects of sampler-skimmer separation in inductively coupled plasma-mass spectrometry

The effects of varying the sampler-skimmer spacing in an inductively coupled plasma-mass spectrometer are illustrated. The signals for a number of species were monitored including background ions (ArN⁺, ArO⁺, ArOH⁺, Ar₂⁺, Ar₂H⁺), background continuum, analyte ions (Cu⁺, Ce⁺, La⁺), analyte oxide ions (CeO⁺, LaO⁺), and matrix induced ions (ArNa⁺). As the sampler-skimmer spacing is increased over that normally used, the signal for some species decreases in intensity while the signal for others increases in intensity. There is a wide range of differential behavior and in some cases the signal changes are quite dramatic.

In addition to presenting results for an Ar plasma, measurements are also presented for a N₂-Ar mixed gas plasma. For some species, the signal changes observed when the sampler-skimmer spacing is increased are quite different with the N₂-Ar mixed gas plasma than with the Ar plasma and are, in some cases, opposite to signal changes observed with the Ar plasma. It appears that a larger sampler-skimmer spacing is more appropriate for a N₂ mixed gas plasma than the spacing normally used for a pure Ar plasma. Finally the effect of sampler-skimmer spacing on matrix effects is presented and it appears that matrix effects are not induced in the zone between the sampler and the skimmer.     

Neutron activation analysis and inductively coupled plasma-mass spectrometry for the determination of elements in tree stems

Mn, Zn and Al concentrations of ume, sakura and sugi stems determined by ICP-MS using a simple pretreatment were compared with those determined by INAA. We obtained a considerably good agreement between the two methods. ICP-MS using simple pretreatment was found to be useful in analyzing the elements in tree stems.     

High-throughput determination of seven trace elements in food samples by inductively coupled plasma-mass spectrometry

A method was developed for high-throughput determinations of 7 elements in food samples, namely antimony (Sb), arsenic (As), cadmium (Cd), chromium (Cr), lead (Pb), mercury (Hg), and tin (Sn). The samples were digested by closed-vessel microwave-assisted digestion using concentrated nitric acid (HNO3) as the medium, followed by microwave- assisted evaporation to concentrate the sample solutions before dilution to the desired volume. The microwave-assisted evaporation procedure effectively reduced the final acid concentration to around 8% before analysis by inductively coupled plasma-mass spectrometry (ICP-MS). This reduction allows determination by ICP-MS to proceed without further sample dilution, which would affect the detection limit. The method was validated, and method recoveries for As, Cd, Cr, Pb, and Hg were within the certified ranges of the chosen certified reference materials. Recoveries of the 7 elements from spiked samples ranged from 93.1 to 103.6%. The standard uncertainties of precision for the 7 elements were between 3.1 and 4.3%. Interlaboratory comparison studies for As, Cd, and Pb gave z-scores ranging from -0.2 to 0.3.     

Automatic selection of internal standards in inductively coupled plasma-mass spectrometry

The automatic selection of internal standards in inductively coupled plasma-mass spectrometry was performed using a cluster analysis algorithm. The samples contained 25 analytes, spanning the atomic mass and ionization potential ranges, and a single interfering element. The interferents examined were Na, Mg, K, Zn, Ba, and Pb. The cluster analysis algorithm used kinetic energy, ionization potential, oxide bond strength, hydride bond strength, and electronegativity, to group the analytes. These variables were weighted differently in the various matrices. The performance of the clustering method and selection of internal standards was good for most analytes in the various matrices.     

Development of a method for the determination of heavy metals in calcified tissues by inductively coupled plasma-mass spectrometry

Calcified tissues are good indicators of exposure to environmental pollution since the mineral phase incorporates heavy metals to which it is exposed during development. Analysis of these specimens is difficult due to the low concentration of the elements of interest compared with the high concentration of the matrix elements. ICP-MS allows rapid multielement determination of samples and a method for the determination of trace elements in calcified tissues is presented with reference to an SRM of Bone Ash (NIST 1400). Received: 2 October 1998 / Revised: 30 November 1998 / Accepted: 4 December 1998     

Development of a method for the determination of heavy metals in calcified tissues by inductively coupled plasma-mass spectrometry

Calcified tissues are good indicators of exposure to environmental pollution since the mineral phase incorporates heavy metals to which it is exposed during development. Analysis of these specimens is difficult due to the low concentration of the elements of interest compared with the high concentration of the matrix elements. ICP-MS allows rapid multielement determination of samples and a method for the determination of trace elements in calcified tissues is presented with reference to an SRM of Bone Ash (NIST 1400).     

Using inductively coupled plasma-mass spectrometry for calibration transfer between environmental CRMs

Multielement analyses of environmental reference materials have been performed using existing certified reference materials (CRMs) as calibration standards for inductively coupled plasma-mass spectrometry. The analyses have been performed using a high-performance methodology that results in comparison measurement uncertainties that are significantly less than the uncertainties of the certified values of the calibration CRM. Consequently, the determined values have uncertainties that are very nearly equivalent to the uncertainties of the calibration CRM. Several uses of this calibration transfer are proposed, including, re-certification measurements of replacement CRMs, establishing traceability of one CRM to another, and demonstrating the equivalence of two CRMs. RM 8704, a river sediment, was analyzed using SRM 2704, Buffalo River Sediment, as the calibration standard. SRM 1632c, Trace Elements in Bituminous Coal, which is a replacement for SRM 1632b, was analyzed using SRM 1632b as the standard. SRM 1635, Trace Elements in Subbituminous Coal, was also analyzed using SRM 1632b as the standard.     

Development of column-pretreatment chelating resins for matrix elimination/multi-element determination by inductively coupled plasma-mass spectrometry

Chelating resins, two kinds of iminodiacetate derivatives (IDA) of cross-linked chitosan (CCS) were synthesized and investigated for adsorption capacity, matrix elimination and collection/concentration of analytes by a column pretreatment in a multi-element ICP-MS determination method. The adsorption behavior of 54 elements at the 10 ng ml(-1) level on chitosan derivatives in a packed mini-column was systematically examined. Almost 30 kinds of metal ions were recovered quantitatively at pH 5 with CCS-HP/IDA (cross-linked chitosan possessing N-2-hydroxypropyl iminodiacetic acid groups) column. Compared with available chitosan-iminodiacetate resin, CHITOPEARL CI-03, the recovery of the metal ions such as Cu, Pb and La is satisfactory with CCS-IDA (cross-linked chitosan possessing N,N-iminodiacetic acid groups) and CCS-HP/IDA using 2 M nitric acid as an eluent, which may be attributed to the difference of cross-linking and macroporous structure. Compared with Chelex-100, the adsorption efficiency is in the order: Chelex-100 > CCS-IDA > CCS-HP/IDA, especially in the chelating ability for alkaline earth metals. The resin with a longer spacer (CCS-HP/IDA) showed higher adsorption selectivity between heavy metal ions and alkaline earth metals at pH < 7. The separation efficiency of the major matrix cations in seawater (Na. K, Mg, Ca) has also been investigated, and matrix interference was negligible even in a seawater sample at pH 5 with CCS-HP/IDA. The recoveries of Mn at pH 5 with CCS-HP/IDA or Chelex-100 were almost 100%. However, those of Mg with each resin were 4 or 98%, respectively. The adsorption capacities of synthesized CCS-HP/IDA for Cu(II), Pb(II) and La(III) were 0.90, 0.65 and 0.34 mmol g(-1), respectively. Therefore, the chelating chitosan resins developed are applicable to the pretreatment of trace amounts of elements in various kinds of water samples.     

Determination of total iodine in foods and dietary supplements using inductively coupled plasma-mass spectrometry

A method was developed and validated for the determination of total iodine in a wide variety of food products and dietary supplements. The method involves a unique sample digestion with a KOH solution in an oven or by using an open-vessel microwave system. After digestion, a stabilizer is added and the solution is taken to volume, then filtered and analyzed either directly or after dilution. The amount of iodine is determined with inductively coupled plasma-mass spectrometry (ICP-MS). The method was validated by experiments to determine its precision, accuracy, linearity, specificity, ruggedness, and robustness. The LOQ of this method is 25-50 microg/kg. The method demonstrated an average RSD of 2.27% during analysis of milk powder and 4.30% during analysis of a dietary supplement tablet reference material. The accuracy of the method as determined with these same reference materials was 100 and 94.2%, respectively. The method has been used successfully on commodity foods, processed foods, dairy products, pet food, infant formula, animal feed, mineral premixes, and a variety of dietary supplements.     

An improved interface for inductively coupled plasma-mass spectrometry (ICP-MS)

Adiabatic sampling of the plasma from an inductively coupled plasma (ICP) torch is a crucial first step for inductively coupled plasma-mass spectrometry (ICP-MS) to reach its full potential as a trace multi-element analysis system. Previous results in the literature are reviewed, and a series of experiments reported, which indicate that a discharge, previously called a “pinch” effect, can be present in which the plasma properties are strongly altered by a constricted current flowing between the plasma and the sampling orifices, i.e. a secondary discharge. Measurements and calculations indicate that this mechanism is consistent with previously reported deleterious effects—abnormal production of doubly ionized species, a wide kinetic energy distribution for the ions sampled into vacuum, formation of ions from metal eroded from the sampling orifices, and a decreased orifice life-time. The mechanism producing the effect was found to be an unwanted capacitive coupling between the voltage on the induction coil and the plasma. Results are included which show that by centre-grounding the coil, the “pinch” effect can be reduced to negligible proportions. The resulting improvements for ICP-MS operation are described.     

A computer-controlled direct sample insertion device for inductively coupled plasma-mass spectrometry

A direct sample insertion (DSI) device has been developed for application to inductively coupled plasma-mass spectrometry (ICP-MS). In a DSI device for use with ICPs, the sample is placed into or onto a probe with subsequent introduction of the sample carrying probe, via the central tube of the ICP torch, into the plasma. A mechanical, stepper-motor driven, computer controlled DSI device and software support system has been designed and developed that can easily be attached to a commercial ICP-MS system (Perkin-Elmer/SClEX Elan). This system allows the direct introduction of microliter volumes of liquids and milligram quantities of powdered/solid samples into the ICP-MS with little or no sample pre-treatment.     

Microwave assisted extraction of iodine and bromine from edible seaweed for inductively coupled plasma-mass spectrometry determination

The feasibility of microwave energy to assist the solubilisation of edible seaweed samples by tetramethylammonium hydroxide (TMAH) has been investigated to extract iodine and bromine. Inductively coupled plasma-mass spectrometry (ICP-MS) has been used as a multi-element detector. Variables affecting the microwave assisted extraction/solubilisation (temperature, TMAH volume, ramp time and hold time) were firstly screened by applying a fractional factorial design (2^5-1 + 2), resolution V and 2 centre points. When extracting both halogens, results showed statistical significance (confidence interval of 95%) for TMAH volume and temperature, and also for the two order interaction between both variables. Therefore, these two variables were finally optimized by a 2² + star orthogonal central composite design with 5 centre points and 2 replicates, and optimum values of 200 °C and 10 mL for temperature and TMAH volume, respectively, were found. The extraction time (ramp and hold times) was found statistically non-significant, and values of 10 and 5 min were chosen for the ramp time and the hold time, respectively. This means a fast microwave heating cycle. Repeatability of the over-all procedure has been found to be 6% for both elements, while iodine and bromine concentrations of 24.6 and 19.9 ng g⁻¹, respectively, were established for the limit of detection. Accuracy of the method was assessed by analyzing the NIES-09 (Sargasso, Sargassum fulvellum) certified reference material (CRM) and the iodine and bromine concentrations found have been in good agreement with the indicative values for this CRM. Finally, the method was applied to several edible dried and canned seaweed samples.     

On-line coupling of gel electrophoresis and inductively coupled plasma-mass spectrometry

The on-line coupling of gel electrophoresis with inductively coupled plasma-mass spectrometry (GE-ICP-MS) is a powerful tool for simultaneous separation, detection and quantification of bio-molecules, and has been applied to the determination of phosphorus in DNA, phosphoproteins, and phosphopeptides, gold in nano-particles, iron in metalloproteins, and iodine in aerosols, and cisplatin-oligonucleotide interactions. However, since the first report in 2005, relatively few papers have been published, perhaps reflecting the lack of familiarity with the benefits of this promising methodology. So, here for the first time, we critically review the applications of GE-ICP-MS, and explore the advantages and the limitations of the technique for various applications. Such scrutiny may be useful in not only the development of the technique but also highlighting its potential in proteomics, genomics and metallomics.     

电感耦合等离子体质谱法测定地球化学样品中镉

采用HF-HClO4-HNO3-H2SO4分解样品,王水提取,选用4个国家一级标准物质制备成标准系列校准,ICP-MS法直接测定地球化学样品中的Cd。选择103Rh为内标,确定了仪器的最佳分析条件,研究了Zr,Sn对Cd的干扰,选择114Cd作为测定同位素,采用数学公式校正了Sn对Cd的同质异位素干扰,方法检测限(3s)为6.3×10-3μg/g,RSD(n=12)为3.9%～6.6%。经国家一级标准物质验证,测定值与标准值吻合较好。该方法适用于地球化学样品中的微量Cd的测定。     

Preparation of ion-imprinted polyvinyl sulfonate-grafted silica particles for trace enrichment of Th(IV) prior to determination by inductively coupled plasma-mass spectrometry

Grafting from polymerisation technique has been used to prepare Th(IV) ion-imprinted polyvinyl sulfonate (IIPVS)-bonded silica particles. The graft polymerisation of vinyl sulfonate (VS) on the surface of silica particles was achieved in aqueous medium through thermal decomposition of surface-bound azo initiators (60°C) in the presence of thorium ion. The prepared material was characterised by Fourier transform infrared spectroscopy, differential scanning calorimetry and thermogravimetric analysis. The entrapped template ion was then removed using 2 M HCl. The experimental batch rebinding data were successfully described by the Langmuir–Freundlich model. The prepared material was then packed to a PTFE micro-column (20 mm × 3.0 mm, id) to evaluate its efficiency in column operations prior to determination by inductively coupled plasma-mass spectrometry (ICP-MS). The limit of detection of the method and breakthrough capacity of the column was evaluated as 0.074 µg L^?1 and 0.83 mg g^?1, respectively. The selectivity of the prepared polymer towards Th(IV) ion was investigated in the presence of some foreign competitor ions, including U(VI). Finally, the proposed method has been used to determine Th(IV) ion in real samples.     

A new HF-resistant tandem spray chamber for improved determination of trace elements and Pb isotopes using inductively coupled plasma-mass spectrometry

The use of a new HF-resistant tandem spray chamber arrangement consisting of a cyclonic spray chamber and a Scott-type spray chamber made from PFA and PEEK provides a straightforward approach for improving the performance of inductively coupled-mass spectrometry (ICP-MS). The characteristics of the tandem spray chamber were critically evaluated against a PEEK cyclonic and a PFA Scott-type spray chamber, respectively. Sensitivity across the entire mass range was increased by about three times compared to the conventional setup utilizing only one spray chamber. Precision of the results, especially at low signal intensities, improved by 160% and 31% compared to the cyclonic and Scott-type spray chamber, respectively. Using the tandem spray chamber, the oxide formation rate was lowered by about 50%. Signals as low as 30 counts could be determined under routine measurement conditions with a RSD of 2.4% thus allowing to precisely quantify small concentration differences at the ng l^− 1 concentration level. The excellent precision (0.02–0.07%) of ²⁰⁶Pb / ²⁰⁷Pb and ²⁰⁶Pb / ²⁰⁸Pb ratios determined in pore water samples was rather limited by the instrumental capabilities of the single collector ICP-MS instrument than by the performance of the tandem spray chamber.