Electrochemical synthesis and characterization of poly(3,4-ethylenedioxythiophene) in ionic liquids with bulky organic anions

The electrochemistry of poly(3,4-ethylenedioxythiophene) (PEDOT) was studied in two ionic liquids with bulky organic anions, i.e., 1-butyl-3-methylimidazolium (BMIM) diethylene glycol monomethyl ether sulfate (MDEGSO₄) and BMIM octyl sulfate (OctSO₄). BMIM-MDEGSO₄ is a liquid, while BMIM-OctSO₄ is in solid form at room temperature. Electrosynthesis of PEDOT in BMIM-MDEGSO₄ with an EDOT concentration of 0.1 M and in BMIM-MDEGSO₄/EDOT 1/1 (w/w) solution resulted in no polymer at all or a very limited amount of polymer on the electrode surface, as determined by cyclic voltammetry in 0.1 M KCl(aq) solution. In contrast, electrosynthesis of PEDOT in BMIM-OctSO₄/EDOT 1/1 (w/w) resulted in a high yield of electroactive material on the electrode surface. Furthermore, electrosynthesis of PEDOT in ionic liquid–water solution (C_{ionic liquid}=1.5 M) containing 0.1 M EDOT was also found to give a relatively high yield of electroactive material on the electrode surface, both for 1.5 M BMIM-MDEGSO₄(aq) and 1.5 M BMIM-OctSO₄(aq). The PEDOT electrodes showed an anionic potentiometric response in 10^–5–10^–1 M KCl(aq) solution, indicating a predominant anion transfer at the polymer–solution interface despite the relatively bulky anions (MDEGSO₄^– or OctSO₄^–) incorporated as counterions in PEDOT during electropolymerization. On the basis of electrochemical impedance spectroscopy, the charge (ion) transport properties of the polymer film were strongly influenced by the water content of the ionic liquid (C_{ionic liquid}=0.05–2.0 M).Dedicated to Zbigniew Galus on the occasion of his 70th birthday     

Selective separation of lambdacyhalothrin by porous/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization

Porous/magnetic molecularly imprinted polymers (PM‐MIPs) were prepared by Pickering emulsion polymerization. The reaction was carried out in an oil/water emulsion using magnetic halloysite nanotubes as the stabilizer instead of a toxic surfactant. In the oil phase, the imprinting process was conducted by radical polymerization of functional and cross‐linked monomers, and porogen chloroform generated steam under the high reaction temperature, which resulted in some pores decorated with easily accessible molecular binding sites within the as‐made PM‐MIPs. The characterization demonstrated that the PM‐MIPs were porous and magnetic inorganic–polymer composite microparticles with magnetic sensitivity (M_s = 0.7448 emu/g), thermal stability (below 473 K) and magnetic stability (over the pH range of 2.0–8.0). The PM‐MIPs were used as a sorbent for the selective binding of lambdacyhalothrin (LC) and rapidly separated under an external magnetic field. The Freundlich isotherm model gave a good fit to the experimental data. The adsorption kinetics of the PM‐MIPs was well described by pseudo‐second‐order kinetics, indicating that the chemical process could be the rate‐limiting step in the adsorption of LC. The selective recognition experiments exhibited the outstanding selective adsorption effect of the PM‐MIPs for target LC. Moreover, the PM‐MIPs regeneration without significant loss in adsorption capacity was demonstrated by at least four repeated cycles.     

Fabrication of Immunosensor Based on Polyaniline,Fullerene‐C60 and Palladium Nanoparticles Nanocomposite: An Electrochemical Detection Tool for Prostate Cancer

Present work demonstrates the fabrication of new and facile sandwich‐type electrochemical immunosensor based on palladium nanoparticles (PdNPs), polyaniline (PANI) and fullerene‐C₆₀ nanocomposite film modified glassy carbon electrode (PdNP@PANI‐C₆₀/GCE) for ultrasensitive detection of Prostate‐specific antigen (PSA) biomarker. PdNP@PANI‐C₆₀ was electrochemically synthesized on GCE and used as an electroactive substrate. PdNP@PANI‐C₆₀ was characterized by scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDS), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Primary antibody anti‐PSA (Ab1) was covalently immobilized on PdNP@PANI‐C₆₀/GCE using NHS/EDC linkers. In the presence of PSA antigen, horseradish peroxidase secondary antibody (HRP‐Ab2) was brought into the surface of the electrode, developing stable amplified signals of H₂O₂ reduction. Under the optimal conditions, a linear curve for determination of PSA at the proposed immunosensor was 1.6×10^?4 ng.mL^?1 to 38 ng.mL^?1 with a limit of detection (LOD) of 1.95×10^?5 ng.mL^?1. The proposed immunosensor was successfully validated in serum and urine samples towards PSA detection with satisfactory and acceptable results.     

三唑酮分子印迹预组装体系的分子模拟与吸附性能

以三唑酮为模板分子, 以丙烯酰胺(AM)、 丙烯酸(AA)、 甲基丙烯酸(MAA)和三氟甲基丙烯酸(TFMAA)为功能单体预组装了分子印迹聚合物体系, 采用半经验法和从头算法, 利用Hyperchem软件模拟了三唑酮与4种功能单体所组成的分子印迹预组装体系的构型、 能量、 反应配比及复合反应的结合能, 选择复合物结合能最高的功能单体用于分子印迹聚合物的合成. 采用密度泛函方法计算了模板与单体在不同致孔剂中的溶剂化能. 结果表明, 三唑酮与三氟甲基丙烯酸所形成复合物的作用力最强, 在非极性溶剂中溶剂化能最弱. 由预组装体系的差示紫外光谱法研究发现, 一分子三唑酮可与两分子三氟甲基丙烯酸在氯仿中形成氢键复合物, 与分子模拟的结果一致. 在最佳模拟条件下, 合成了三唑酮的印迹聚合物, 利用吸附等温线Langmuir和Freundlich模型研究了印迹聚合物的吸附行为及识别机理. 上述方法对于分子印迹体系的筛选及分子印迹聚合物性能的预测有重要的意义.     

Preparation and Application of a Novel Silica-Supported Organic-Inorganic Hybrid Molecular Imprinting Polymer

Abstract

A novel estazolam-imprinted silica sorbent was prepared by the surface imprinting technique using 3-aminopropyltriethoxysilane (APTEOS) and phenyltrimethoxysilane (PTMOS) as functional monomers. The functional monomers are expected to form hydrogen bonds and π-π interactions with estazolam. The imprinted silica sorbent was characterized by Fourier transform infrared spectroscopy (FT-IR), element analysis, and scanning electron micrograph (SEM). Compared to C₁₈ solid phase extraction (SPE) and liquid-liquid extraction, molecular imprinting polymer (MIP) SPE was the most feasible method to extract estazolam from human plasma, and the recovery of estazolam was up to 98.7±1.2%.     

Reactions of solute species at an electrode modified with titanocene functionalized polypyrrole film: ferrocene and titanocene dichloride

We have studied for the first time the ability of a conducting polymer film, p(Tc3Py), representing a polypyrrole matrix with covalently attached titanocene dichloride (TcCl₂) centers, to serve as an intermediator for the electron charge transport between the electrode and the reaction sites of solute reactants. The standard potential of the first of these electroactive species, ferrocene (Fc), is in the range where the polymer matrix is in its slightly oxidized state so that solute Fc species give a reversible response at the surface of this modified electrode. Another solute reactant, TcCl₂, was studied in solutions in which it demonstrates a (quasi)reversible behavior at bare electrode surfaces, THF+TBAPF₆ and AN+TEACl. The standard redox potential of this species belongs to the range of the electroactivity of immobilized TcCl₂ centers (where the matrix is in its non-conducting state) so that the electron charge has to be transported via stepwise redox reactions between neighboring centers inside the film. The combination, solute reactant+film, results in a greater CV current compared to the response of the film in background solution or of the solute species at the bare electrode surface. This current for THF solution even exceeds the sum of separate currents for the film and the reactant. This finding is attributed to a catalytic effect of solute species as redox intermediators for the transformation of immobilized electroactive centers leading to a greater degree of the film reduction. The presence of solute TcCl₂ species results in a much greater stability of immobilized centers (compared to the corresponding reactant-free solution), both in the course of CV with the passage of the range of their response and in experiments with the film holding at the potential within this range. This holding leads to an almost constant current related to the reaction of solute species at the film/solution interface. Our estimate shows that immobilized centers undergo above 10,000 reversible transformations (without an observed tendency to the degradation) to ensure the passage of this current. The conclusion has been drawn that immobilized TcCl₂ centers are able to serve as sufficiently stable redox intermediators for the electron charge transport across the film, a prerequisite for the catalytic applications of such films.Abbreviations AN acetonitrile - THF tetrahydrofuran - Cp cyclopentadienyl, C₅H₅ - Cp cyclopentadienyl radical, C₅H₄ - Fc ferrocene, Cp₂Fe - TcCl₂ titanocene=bis(cyclopentadienyl)titanium dichloride, Cp₂TiCl₂ or its radical CpCpTiCl₂ - PPy polypyrrole - Tc3Py titanocene-propyl-pyrrole, Cl₂TiCpCp(CH₂)₃NC₄H₄ - p(Tc3Py) polymer obtained from Tc3Py - TBAPF₆ tetrabuthylammonium hexafluorophosphate - TEACl tetraethylammonium chlorideDedicated to Zbigniew Galus on the occasion of his 70th birthday.     

Application of a novel electrosynthesized polydopamine-imprinted film to the capacitive sensing of nicotine

The application of novel electrosynthesized polydopamine (PDA)-imprinted film as a recognition element for the capacitive sensing of nicotine is reported. The PDA-imprinted film was electropolymerized directly on the gold electrode surface in the presence of nicotine without an additional self-assembled thiol sublayer. The compact PDA film has various functional groups that aid the imprinting procedure. Furthermore, the film shows good capacitive response since it is insulating in nature and ultrathin. The sensor’s linear response range for nicotine was between 1–25 μmol L⁻¹, with a detection limit of 0.5 μmol L⁻¹. The proposed molecularly imprinted polymer capacitive (MIPC) sensor exhibited good selectivity for nicotine. The reproducibility and repeatability of the MIPC senor were all found to be satisfactory. The results from sample analysis confirmed the applicability of the MIPC sensor to quantitative analysis.     

Amperometric morphine sensing using a molecularly imprinted polymer-modified electrode

This study incorporates morphine into a molecularly imprinted polymer (MIP) for the amperometric detection of morphine. The polymer, poly(3,4-ethylenedioxythiophene), PEDOT, is an electroactive film that catalyzes morphine oxidation and lowers the oxidization potential on an indium tin oxide (ITO) electrode. The MIP-PEDOT modified electrode is prepared by electropolymerizing PEDOT onto an ITO electrode in a 0.1 M LiClO₄ solution with template addition (morphine). After template molecule extraction, the oxidizing current of the MIP-PEDOT modified electrode is measured in a 0.1 M KCl solution (pH = 5.3) at 0.75 V (versus Ag/AgCl/sat’d KCl) with the morphine concentration varying in the 0.1-5 mM range. A linear range, displaying the relationship between steady-state currents and morphine concentrations, from 0.1 to 1 mM, is obtained. The proposed amperometric sensor could be used for morphine detection with a sensitivity of 91.86 μA/cm² per mM. A detection limit of 0.2 mM at a signal-to-noise ratio of 3 is achieved. Moreover, the proposed method can discriminate between morphine and its analogs, such as codeine.     

Preparation and characterization of novel molecularly imprinted polymers based on thiourea receptors for nitrocompounds recognition

Molecularly imprinted polymers (MIPs) for the recognition of nitro derivatives are prepared from three different (thio)urea-bearing functional monomers. The binding capability of the polymers is characterized by a batch binding experiment. The imprinting factors and affinity constants (K) of the imprinted polymers exhibit the same tendency as the binding constants (K_a) of the functional monomers to the target substance in solution. Not only nitrofurantoin is efficiently bound by these MIPs but also a broad spectrum of other nitro compounds is bound with at the intermediate level, addressing that these (thio)urea-based monomers can be utilized to prepare a family of MIPs for various nitro compounds, which can be applied as recognition elements in separation and analytical application.     

A novel molecularly imprinted polymer thin film as biosensor for uric acid

A novel amine-imide type conducting polymer, denoted as poly(PD-BCD), was molecularly imprinted on an indium-tin oxide (ITO) glass, with uric acid (UA) as the template and without any functional monomer. Intending to improve the imprinting efficiency, the polymer content was varied from 0.3 to 0.9 wt% during the preparation of the molecularly imprinted polymer (MIP), thereby varying the thickness of the polymer film; the content of UA as the template was maintained to be the same for all the films. The sensitivities of the thus prepared MIP electrodes were calculated to be more than 3-fold, compared to those of the corresponding non-MIP (NMIP) electrodes, which were obtained through the same method, however, without adding UA during their preparation. A polymer content of 0.6 wt% rendered the best performing MIP electrode, as judged by the imprinting efficiency and sensitivity of the electrode for UA. A linear relationship between steady-state currents and UA concentrations from 0 to 1.125 mM was obtained for both types of the sensors. The sensitivities of the MIP and the NMIP electrodes made with 0.6 wt% of polymer were calculated to be 24.72 and 6.63 μA mM⁻¹ cm⁻², respectively. The limit of detection (LOD) for this MIP was found to be 0.3 μM at a signal to noise ratio (S/N) of 3. This MIP electrode was used as a biosensor for the detection of UA in the presence of ascorbic acid (AA) in a sample containing these species in the same concentrations as those in a human serum. The selectivity of MIP electrode is higher than that of NMIP electrode, and the values are 28.76 and 8.85, respectively. The results are substantiated by using cyclic voltammetry (CV), linear sweep voltammetry, amperometry, and scanning electron microscopy.     

The effectively specific recognition of bovine serum albumin imprinted silica nanoparticles by utilizing a macromolecularly functional monomer to stabilize and imprint template

Structural stability of the template is one of the most important considerations during the preparation of protein imprinting technology. To address this limitation, we propose a novel and versatile strategy of utilizing macromolecularly functional monomers to imprint biomacromolecules. Results from circular dichroism and synchronous fluorescence experiments reflect the macromolecularly functional monomers tendency to interact with the protein surface instead of permeating it and destroying the hydrogen bonds that maintain the protein’s structural stability, therefore stabilizing the template protein structure during the preparation of imprinted polymers. The imprinted polymers composed of macromolecularly functional monomers or their equivalent micromolecularly functional monomers over silica nanoparticles were characterized and carried out in batch rebinding test and competitive adsorption experiments. In batch rebinding test, the imprinted particles prepared with macromolecularly functional monomers exhibited an imprinting factor of 5.8 compared to those prepared by micromolecularly functional monomers with the imprinting factor of 3.4. The selective and competitive adsorption experiments also demonstrated the imprinted particles made by macromolecularly functional monomers possessed much better selectivity and specific recognition ability for template protein. Therefore, using macromolecularly functional monomers to imprint may overcome the mutability of biomacromolecule typically observed during the preparation of imprinted polymers, and thus promote the further development of imprinting technology.     

Amperometric detection of morphine based on poly(3,4-ethylenedioxythiophene) immobilized molecularly imprinted polymer particles prepared by precipitation polymerization

Molecular imprinting is a novel technique used for chiral separation, artificial antibodies, sensors, and assays. Typically, molecular imprinted polymers (MIPs) are monoliths with irregular shapes. However, microspherical shapes with more uniform size can be obtained by the method of precipitation polymerization, which offers a higher active surface area by manipulating its compositions. In this study, MIP particles for the target molecule, morphine, were synthesized using a precipitation polymerization method that is more facile than the previous one that produced a thermally polymerized bulk. The conducting polymer, poly(3,4-ethylenedioxythiophene) (PEDOT), was utilized to immobilize the MIP particles onto the indium tin oxide (ITO) glass as a MIP/PEDOT-modified electrode. The sensitivity for the MIP/PEDOT-modified electrode with MIP particles was 41.63 μA/cm² mM, which is more sensitive than that with non-MIP particles or that of a single PEDOT film with no incorporated particles in detecting morphine ranging from 0.1 to 2 mM. The detection limit was 0.3 mM (S/N = 3). In addition, we presented that the modified electrode can discriminate codeine that plays an interfering species.     

柚皮苷分子印迹传感器的制备与应用

以邻氨基酚为单体,无电化学活性的柚皮苷为模板分子,采用循环伏安法(扫速为100mV/s)在碳电极上往复扫描30次,电聚合出具有识别柚皮苷分子功能的敏感膜。以扫描电子显微镜(SEM)、X射线全反射(XRR)及电化学方法对该印迹传感器进行表征。结果表明,印迹传感器敏感膜与非印迹膜在形貌结构和电化学特性方面有明显的不同。此传感器对柚皮苷有较好的选择性,响应快(30s),在6.0×10-5～1.4×10-4mol/L范围内呈线性关系,且重现性好(RSD=1.8%,n=5);传感器对柚皮苷的检出限为1.6×10-5mol/L。     

复合碱性功能单体分子烙印手性固定相

采用丙烯酰胺+2-乙烯基吡啶的复合碱性功能单体体系制备了氨基酸衍生物分子烙印高效液相色谱手性固定相。在优化了功能单体与烙印分子的比例条件下对于烙印分子及其结构相似的对映体具有良好的手性分离能力。考察了烙印分子的化学基团对手性分离的影响,发现氢键作用力和较强的离子作用力在手性分离过程中均有贡献。     

Sorption/desorption of radionickel on/from Na-montmorillonite: kinetic and thermodynamic studies

In this work, Na-montmorillonite was used as a novel adsorbent for the sorption of Ni(II) from aqueous solutions. The sorption and desorption of Ni(II) on Na-montmorillonite was investigated as the function of pH, ionic strength, Ni(II) concentrations and temperature. The results indicated that the sorption of Ni(II) on Na-montmorillonite was strongly dependent on pH, ionic strength and temperature. The sorption of Ni(II) increases slowly from 22.1 to 51.4% at pH range 2–6.5, abruptly at pH 6.5–9, and at last maintains high level with increasing pH at pH > 9 in 0.1 mol/L NaNO₃ solutions. The Ni(II) kinetic sorption on Na-montmorillonite was fitted by the pseudo-second-order model better than by the pseudo-first-order model and the experimental data implies that Ni(II) sorption on montmorillonite were mainly controlled by the film diffusion mechanism. The Langmuir, Freundlich and D–R models were used to simulate the sorption data at three different temperatures (298.15, 318.15 and 338.15 K) and the results indicated that Langmuir model simulates the experimental data better than Freundlich and D–R models. The sorption–desorption isotherm of Ni(II) on montmorillonite suggested that the sorption is irreversible. The irreversible sorption of Ni(II) on montmorillonite indicates that montmorillonite can be used to pre-concentration and solidification of Ni(II) from large volumes of solution and to storage Ni(II) ions stably.     

A new green-to-transmissive polymer with electroactive poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) as an interface layer for achieving high-performance electrochromic device

A new neutral green electrochromic (EC) polymer, namely poly(5,8-bis(2,3-dihydro[3,4-B][1,4]dioxin-5-yl)-2,3-dual(4-(hexadecyloxy) phenyl) quinoxaline) (PBOPEQ) was designed and synthesized. PBOPEQ-poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) film was further prepared by electrochemical polymerization on the PEDOT:PSS modified indium tin oxide (ITO) electrode. Scanning electron microscopy images and ultrasonic experiment indicate that PBOPEQ-PEDOT:PSS film shows better film-forming ability and stronger interface adhesive with ITO electrode compared to that of PBOPEQ film. It is worth mentioning that PBOPEQ-PEDOT:PSS film presents more reversible redox characteristic, better optical contrast (~40%) and coloration efficiency (~230 cm² C⁻¹) at 678 nm, excellent EC stability and memory property (36 hr), which should be ascribed to that the electroactive PEDOT:PSS layer facilitates the charge transfer process and enhances the ion doping/dedoping properties. EC device based on PBOPEQ-PEDOT:PSS film exhibits superior integrated performance such as reversible color change from green to transmissive, optical contrast of 41.0% and switching time less than 1 s. Accordingly, PBOPEQ-PEDOT:PSS is an excellent EC material when combined with electroactive PEDOT:PSS interface layer for achieving high performance device, which shows potential applications in displays, electronic papers, and tags.     

Microelectrode Electrochemistry in Microemulsion Systems

Abstract

In this paper, we demonstrate the microelectrode electrochemistry of a simple electroactive probe (ferrocene) in SDS/n‐C₄H₉OH/H₂O microemulsion systems. The oxidation of ferrocene within the microemulsion environment was carried out at a Pt microelectrode using a three‐electrode assembly with a Pt wire acting as an auxiliary electrode and an Ag wire as the pseudo‐reference electrode. Excellent Nernstian electrochemical responses were observed. The well‐defined reversible electrochemical responses facilitated the measurement of the self‐diffusion coefficient of microemulsion droplets and introduced the possibility of probing the structural changes of microemulsion systems.     

Electrochemistry and scanning electron microscopy of polyaniline/peroxidase-based biosensor

An amperometric biosensor was prepared by in situ deposition of horseradish peroxidase (HRP) enzyme on a polyaniline (PANI)-doped platinum disk electrode. The PANI film was electrochemically deposited on the electrode at 100 mV s⁻¹/Ag-AgCl. Cyclic voltammetric characterization of the PANI film in 1 M HCl showed two distinct redox peaks, which prove that the PANI film was electroactive and exhibited fast reversible electrochemistry. The surface concentration and film thickness of the adsorbed electroactive species was estimated to be 1.85×10⁻⁷ mol cm⁻² and approximately 16 nm, respectively. HRP was electrostatically immobilized onto the surface of the PANI film, and voltammetry was used to monitor the electrocatalytic reduction of hydrogen peroxide under diffusion-controlled conditions. Linear responses over the concentration range 2.5×10⁻⁴ to 5×10⁻³ M were observed. Spectroelectrochemistry was used to monitor the changes in UV-vis properties of HRP, before and after the catalysis of H₂O₂. The biosensor surface morphology was characterized by scanning electron microscopy (SEM) using PANI-doped screen-printed carbon electrodes (SPCEs) in the presence and absence of (i) peroxidase and (ii) peroxide. The SEM images showed clear modifications of the conducting film surface structure when doped with HRP, as well as the effect of hydrogen peroxide on the morphology of biosensor.     

Photo-induced Charge-transfer and Photovoltaic Effect in a Composite Involving a Nonconjugated Conductive Polymer and C60

Photo-induced charge-transfer and resulting photovoltaic effect in a composite involving a nonconjugated conductive polymer, poly(β -pinene) and C₆₀ is reported. The photovoltaic cell was fabricated using indium-tin-oxide coated glass as one electrode and aluminum as the other, with poly(β -pinene)-C₆₀ composite film sandwiched in-between. A Nitrogen laser (325 nm) and an illuminant white-light-source (300–700 nm) were used and the photo-voltage produced was found to have a linear dependency on light intensity. The photoluminescence of poly(β -pinene) (at 360 nm) was quenched when C₆₀ was added to form the composite. Therefore, the photovoltaic effect is a result of excited-state electron-transfer from poly(β -pinene) to C₆₀.