Decyl‐perfluorinated magnetic mesoporous microspheres for extraction and analysis perfluorinated compounds in water using ultrahigh‐performance liquid chromatography–mass spectrometry

In this work, the interior‐walls decyl‐perfluorinated functionalized magnetic mesoporous microspheres (F₁₇–Fe₃O₄@mSiO₂) were synthesized for the first time, and applied as adsorbents to extract and concentrate perfluorinated compounds (PFCs) from water samples. The fluorous functionalized interior pore‐walls contributed to the high‐selective preconcentration of PFCs due to fluorous affinity; and abundant silanol groups on the exterior surface of microspheres contributed to the good dispersibility in water sample. Four kinds of PFCs were selected as model analytes, including perfluorooctanoic acid, perfluorononanoic acid, perfluorododecanoic acid, and perfluorooctane sulphonate. In addition, UHPLC‐ESI/MS/MS was introduced to the fast and sensitive detection of the analytes after sample pretreatment. Important parameters of the extraction procedure were optimized, including salinity, eluting solvent, the amount of F₁₇–Fe₃O₄@mSiO₂ microspheres, and extraction time. The optimized procedure took only 10 min to extract analytes with high recoveries and merely 800‐μL acetonitrile to elute analytes from the magnetic adsorbents. Validation experiments showed good linearity (0.994–0.998), precision (2.6–7.6%), high recovery (93.4–105.7%) of the proposed method, and the limits of detection were from 0.008 to 0.125 μg/L. The F₁₇–Fe₃O₄@mSiO₂ magnetic microspheres have the advantages of great dispersibility in aqueous solution, high specificity of extraction, large surface area, and efficient separation ability. The results showed that the proposed method based on F₁₇–Fe₃O₄@mSiO₂ microspheres is a simple, fast, and sensitive tool for the analysis of PFCs in water sample.     

Rapid magnetic solid-phase extraction based on magnetite/silica/poly(methacrylic acid–co–ethylene glycol dimethacrylate) composite microspheres for the determination of sulfonamide in milk samples

A novel magnetic solid-phase extraction (MSPE) sorbent, magnetite/silica/poly (methacrylic acid–co-ethylene glycol dimethacrylate) (Fe₃O₄/SiO₂/P(MAA-co-EGDMA)), was developed. This MSPE material was prepared by distillation–precipitation polymerization of MAA and EGDMA in the presence of Fe₃O₄/SiO₂ microspheres with the surface containing abundant reactive double bonds. The resultant sorbent material was characterized by elemental analysis, electron microscopy, X-ray diffraction and Fourier-transformed infrared spectroscopy. In this work, eleven sulfonamides (SAs) were selected as model analytes to validate the extraction performance of this new MSPE sorbent. Noticeably, the extraction can be carried out quickly, the extraction time for the SAs onto Fe₃O₄/SiO₂/P(MAA-co-EGDMA) sorbent can be clearly shortened to 0.5 min. The desorption solution of SAs was analyzed by LC–MS/MS, and the results showed that the recoveries of these compounds were in the range of 87.6–115.6%, with relative standard deviations ranging between 0.9% and 10.8%; the limit of detection were in the range of 0.5–49.5 ng/L.     

A sensitive method for determination of a broad range of perfluorinated compounds in serum suitable for large-scale human biomonitoring

A sensitive and reliable method based on column switching liquid chromatography (LC) coupled to a triple quadrupole mass spectrometer (MS) has been developed for quantification of 19 perfluorinated compounds (PFCs) in serum. A volume of only 150 μl serum is used and protein precipitation by methanol is the only sample preparation necessary prior to injection into the column switching system. Pseudo-MRM is used as a detection mode for determination of PFCs, resulting in reduced background noise and considerably increased sensitivity for the perfluorinated alkyl sulfonates and the perfluorinated alkyl sulfonamides. The estimated limits of detection for the method were as low as 0.0020–0.050 ng PFCs/ml serum. The accuracy determined from spiking experiments, reported as recovery of added amount, was between 85 and 121% in the range 0.20–50 ng PFC/ml serum, except for perfluorodecylsulfonate for which the accuracy was 146% at 0.20 ng PFC/ml serum. The low sample volume needed, the limited manual handling and the broad range of analytes which are included, make this method advantageous for large-scale epidemiological studies. This column-switching technique can easily be set up on standard LC–MS/MS instruments and is thus available to a wide range of laboratories.     

Enhanced shape selective catalysis of mixed cyclic ketones in aerobic Baeyer-Villiger oxidation with magnetic Cu-Fe3O4 supported mesoporous silica microspheres

Various strategies have been developed to improve the conversion for the Baeyer-Villiger oxidation. However, the catalytic effects of the Baeyer-Villiger oxidation for the mixed ketones are rarely reported, though it is also important for the natural and industrial separation processes. In this report, magnetite Cu modified Fe₃O₄ supported mesoporous silica microspheres (Cu-Fe₃O₄@mSiO₂) have been successfully synthesized by two step direct hydrothermal method (DHT). Over 99% of cyclohexanone conversion was obtained with mild air oxidation and benzaldehyde as sacrificing agent over Cu-Fe₃O₄@mSiO₂. The catalytic system also shows higher conversion rates for small molecular ketones in the mixed ketone reactants, which was attributed to the enhanced mass transfer effect and Fe-Cu composite active sites in the magnetite mesoporous silica microspheres. The catalyst could be recycled for four times with similar catalytic performance, which shows enhanced shape selectivity in aerobic Baeyer-Villiger oxidations for mixed cyclic ketones.     

Development and validation of a pressurized liquid extraction liquid chromatography–tandem mass spectrometry method for perfluorinated compounds determination in fish

This paper describes the development and validation of an analytical methodology to determine eight perfluorinated compounds (PFCs) in edible fish using pressurized liquid extraction (PLE) with water and solid-phase extraction (SPE) with an ion-exchanger as extraction and pre-concentration procedures, followed by liquid chromatography–quadrupole-linear ion trap mass spectrometry (LC–QqLIT–MS). The rapidity and effectiveness of the proposed extraction procedure were compared with those most commonly used to isolate PFCs from fish (ion-pairing and alkaline digestion). The average recoveries of the different fish samples, spiked with the eight PFCs at three levels (the LOQ, 10 and 100 μg kg⁻¹ of each PFC), were always higher than 85% with relative standard deviation (RSD) lower than 17%. A good linearity was established for the eight PFCs in the range from 0.003–0.05 to 100 μg kg⁻¹, with r > 0.9994. The limits of quantification (LOQs) were between 0.003 and 0.05 μg kg⁻¹, which are well below those previously reported for this type of samples. Compared with previous methods, sample preparation time and/or LOQs are reduced. The method demonstrated its successful application for the analysis of different parts of several fish species. Most of the samples tested positive, mainly for perfluoropentanoic acid (PFPA), perfluorobutane sulfonate (PFBS) and perfluorooctanoic acid (PFOA) but other of the eight studied PFCs were also present.     

Analysis of perfluorinated compounds in biota by microextraction with tetrahydrofuran and liquid chromatography/ion isolation-based ion-trap mass spectrometry

An analytical method combining both a simple, fast and efficient solvent microextraction and a sensitive and selective monitoring mode, based on ion isolation ion-trap mass spectrometry (MS), was developed for analysis of perfluorinated compounds (PFCs) in biota. The method involved the vortex-shaking of 0.2 g of tissue sample and 800 μL of tetrahydrofuran (THF):water (75:25, v/v) for 7 min, subsequent centrifugation for 13 min and direct quantitation of PFCs in the extract against solvent-based calibration curves. Selection of solvent composition was based on Hildebrand solubility parameters and their components (i.e. dispersion, dipole–dipole and hydrogen bonding forces). Recoveries in samples for PFCs with hydrocarbon chain lengths between C₄ and C₁₄ ranged from 85 to 111%, with relative standard deviations between 1 and 11%. The ion isolation monitoring mode, proposed for the first time for ion-trap-MS quantitation, proved to be effective in avoiding space-charge effects caused by co-eluting matrix components while keeping the sensitivity of full scan MS operation. Detection limits of the method were in the range 0.8−6 ng g⁻¹ for perfluoroalkyl carboxylates (PFACs) and 0.4–0.8 ng g⁻¹ for perfluoroalkyl sulfonates (PFASs) in wet weight samples. The method was validated using a reference material made up of flounder muscle and by comparison with triple quadrupole MS measurements and it was applied to the determination of PFCs in liver and muscle samples from sea birds and fishes. Only PFASs were found in samples at quantifiable levels (2.9 and 13.1 ng g⁻¹) while PFACs were below the respective quantitation limits. This method allows quick and simple microextraction of PFCs with minimal solvent consumption, while delivering accurate and precise data.     

Determination of perfluorinated compounds in fish fillet homogenates: method validation and application to fillet homogenates from the Mississippi River

We report herein a simple protein precipitation extraction-liquid chromatography tandem mass spectrometry (LC/MS/MS) method, validation, and application for the analysis of perfluorinated carboxylic acids (C7–C12), perfluorinated sulfonic acids (C4, C6, and C8), and perfluorooctane sulfonamide (FOSA) in fish fillet tissue. The method combines a rapid homogenization and protein precipitation tissue extraction procedure using stable-isotope internal standard (IS) calibration. Method validation in bluegill (Lepomis macrochirus) fillet tissue evaluated the following: (1) method accuracy and precision in both extracted matrix-matched calibration and solvent (unextracted) calibration, (2) quantitation of mixed branched and linear isomers of perfluorooctanoate (PFOA) and perfluorooctanesulfonate (PFOS) with linear isomer calibration, (3) quantitation of low level (ppb) perfluorinated compounds (PFCs) in the presence of high level (ppm) PFOS, and (4) specificity from matrix interferences. Both calibration techniques produced method accuracy of at least 100 ± 13% with a precision (%RSD) ≤18% for all target analytes. Method accuracy and precision results for fillet samples from nine different fish species taken from the Mississippi River in 2008 and 2009 are also presented.     

聚酰胺固相萃取-超高效液相色谱-串联质谱法同时检测饲料中的6种全氟化合物

建立了饲料中6种全氟化合物的聚酰胺固相萃取-超高效液相色谱-串联四极杆质谱分析法。样品采用酸化乙腈提取,在酸性条件下用聚酰胺固相萃取小柱富集,甲醇淋洗净化,5%（v/v）氨水/甲醇溶液洗脱后采用超高效液相色谱-串联四极杆质谱（UPLC-MS/MS）检测。分析柱为Acquity BEH C₁₈（100 mm×2.1 mm,1.7 μm）;流动相为5 mmol/L乙酸铵-乙腈梯度洗脱;在最佳实验条件下,采用多反应监测负离子模式测定,同位素内标法定量。该方法对6种全氟化合物的检出限均小于0.1 μg/kg;对6种饲料及原料的加标回收率为94.2%~108.9%,精密度（RSD）为1.8%~8.6%（n=6）;在0.5~25 μg/L范围内均呈良好的线性关系,线性回归系数r>0.995。该方法前处理成本低,效果好,适合复杂基质样品的检测。     

Rapid magnetic-mediated solid-phase extraction and pre-concentration of selected endocrine disrupting chemicals in natural waters by poly(divinylbenzene-co-methacrylic acid) coated Fe3O4 core-shell magnetite microspheres for their liquid chromatography–tandem mass spectrometry determination

A new Fe₃O₄/poly(divinylbenzene-co-methacrylic acid) core-shell magnetite microspheric material have been successfully developed as magnetic-mediated solid-phase extraction micro-particle sorbent in dispersion mode (MM-SPE-MP) for the determination of selected estrogenic endocrine disrupting chemicals (EDCs), namely: estrone (E1), 17β-estradiol (E2), estriol (E3), 17α-ethynylestradiol (EE2) and bisphenol-A (BPA), in natural water, via quantification by HPLC tandem mass spectrometry. The magnetite Fe₃O₄ core of this MM-SPE-MP sorbent was fabricated by a solvothermal approach and the thin layer of amphipolar poly(divinylbenzene-co-methacrylic acid) (pDVB-MAA) coating was established via suspension polymerization. The resultant core-shell MM-SPE-MP sorbent material was characterized by electron microscopy, X-ray diffraction and Fourier-transformed infrared spectroscopy. Particle size distribution of the core-shell microspheres was within the range 300–700 nm in diameter and the thickness of the pDVB-MAA coating was ca. 10 nm. This magnetite microspheric material can be easily dispersed in aqueous samples and retrieved by the application of external magnetic field via a small piece of permanent magnet. The MM-SPE-MP process for the selected estrogenic EDCs involved the dispersion of the core-shell microspheric sorbent in water samples with sonication, followed by magnetic aided retrieval of the sorbent and solvent (methanol) desorption of extracted EDCs for LC–MS/MS analysis. Partition equilibrium for all the selected EDCs onto this MM-SPE-MP sorbent was achieved within 15 min. Recoveries of the EDCs were in ranges of 56–111%. Analytes with smaller K_OW value showed relatively lower recovery (and relatively longer equilibration time for partitioning). Method detection limits achieved were found to be 1–36 pg ml⁻¹ (n = 3), while the repeatability was 6–34% (p < 0.05, n = 3). This work demonstrates the usefulness of MM-SPE-MP in the rapid and highly sensitive monitoring of trace organic contaminants in natural waters.     

Octyl-functionalized hybrid magnetic mesoporous microspheres for enrichment of low-concentration peptides prior to direct analysis by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Octyl‐functionalized hybrid magnetic mesoporous (Fe₃O₄·nSiO₂·meso‐hybrid‐C8) microspheres were synthesized and applied in the isolation and pre‐concentration of low‐concentration peptides prior to direct analysis by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). Such microspheres possess high surface area (324 m²/g), hydrophobic group (C8), relatively large pore volume (0.304 cm³/g), uniform pore diameter (~3.7 nm), and magnetic responsivity, which make them a simple and efficient kind of adsorbent for the enrichment of low‐concentration peptides. For bovine serum albumin (BSA, 15 fmol μL^–1) digest, after concentration by Fe₃O₄·nSiO₂·meso‐hybrid‐C8 microspheres, the enrichment performance was evidently better than those obtained by solvent evaporation and C8‐functionalized magnetic particles, and comparable to those obtained by commercial Anchor chip target and ZipTipC18 pipette tip. Such microspheres were further applied in the enrichment of the tryptic digests of rat cerebellum proteins and endogenous peptides of crude human serum, and more peaks with higher signal‐to‐noise (S/N) ratio were obtained than before pre‐concentration. Furthermore, the pre‐concentration reproducibility of magnetic microspheres for biological samples was good, and the limit of detection (LOD) for BSA digests by MALDI‐TOF MS was decreased by at least one order of magnitude compared with that obtained without pre‐concentration. All the above‐mentioned results indicate that the synthesized Fe₃O₄·nSiO₂·meso‐hybrid‐C8 microspheres are promising for the enrichment of low‐concentration peptides from complex biosamples. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and electrocatalytic activity of haemin-functionalised iron(II,III) oxide nanoparticles

Haemin-functionalised magnetic iron(II, III) oxide (Fe₃O₄) nanoparticles (Fe₃O₄/haemin) were synthesised by changing the acidity of a solution of the two compounds. The nanoparticles were characterised by transmission electron microscopy, UV–vis absorption spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, measurement of magnetisation, and electrochemical techniques. The properties of both haemin and Fe₃O₄ were retained. Thus, Fe₃O₄/haemin nanoparticles exhibited pronounced electrocatalytic activity towards trichloroacetic acid (TCA) like haemin itself. Interestingly, electrocatalytic activity towards TCA was affected by detection temperature, which was controlled via electrically heated carbon paste electrodes. The maximal catalytic current was 5.8 times higher at 60 °C than at room temperature (25 °C). This proposed electrochemical sensor for TCA possessed a linear detection range of 5–80 μM and a detection limit of 0.3 μM at 60 °C.     

Determination of synthetic phenolic antioxidants and their metabolites in water samples by downscaled solid-phase extraction,silylation and gas chromatography–mass spectrometry

The development and performance evaluation of an analytical method dedicated to the comprehensive determination of the most relevant antioxidants and their metabolites in aqueous environmental samples is presented. This was achieved by a miniaturised solid-phase extraction (SPE) with 10 mg Oasis HLB cartridges, which allow to achieve a concentration factor of 200, reducing organic solvent wastes (1 mL of ethyl acetate suffices for complete elution) and SPE costs and eliminating the need for solvent evaporation that otherwise compromises the recoveries of butylated hydroxytoluene (BHT) and 2,6-di-tert-butylcyclohexa-2,5-diene-1,4-dione (BHT-Q). Analytes were then determined by gas chromatography–mass spectrometry (GC–MS) after derivatisation with N-methyl-N-(tert-butyldimethylsilyl)-trifluoroacetamide (MTBSTFA) in a single run. BHT-d₇ and n-propyl-paraben-d₄ (PrP-d₄) were used as surrogate internal standards. These surrogates allowed obtaining relative recoveries in the 80–110% range for all analytes even with complex wastewater samples and LODs at the 2–44 ng L⁻¹ level taking into account blank issues often associated to antioxidants analysis. The method was applied to sewage and river waters, showing that the seven analytes could be detected in raw wastewater. BHT and BHT-Q were the most concentrated species in that type of sample (in the 275–871 ng L⁻¹ range). On the other hand two metabolites of BHT, 3,5-di-tert-butyl-4-hydroxybenzaldehyde (BHT-CHO) and 3,5-di-tert-butyl-4-hydroxybenzoic acid (BHT-COOH) appeared to be the most ubiquitous species, being found in all samples in the 10–150 ng L⁻¹ concentration range.     

Three-layer structure graphene/mesoporous silica composites incorporated with C8-modified interior pore-walls for residue analysis of glucocorticoids in milk by liquid chromatography–tandem mass spectrometry

Three-layer structure graphene/mesoporous silica composites incorporated with C8-modified interior pore-walls (graphene@mSiO₂-C8) were prepared and applied for efficient extraction of glucocorticoid residuals in milk followed by liquid chromatography-tandem mass spectrometry (LC–MS/MS) analysis. The graphene@mSiO₂-C8 nanocomposites were synthesized by coating C8-modified mesoporous silica onto hydrophilic graphene nanosheets through a simple surfactant-mediated co-condensation sol–gel process. The obtained nanosheets possess unique properties of large surface area (632 m²/g), extended plate-like morphology in the exterior surface, highly open pore structure with uniform pore size (2.8 nm), numerous C8-modified interior pore-walls, as well as good water dispersibility. The performance of the prepared graphene@mSiO₂-C8 materials for extracting small hydrophobic molecules directly from complex protein-rich samples was evaluated by analysis of glucocorticoids in milk. Extraction conditions such as sorbents amount, type and volume of eluting solvent, time of adsorption and desorption were investigated and optimized to achieve the best efficiency. Method validations including linearity, recovery, repeatability, and limit of detection (LOD) were also studied. The results indicated that this methodology provided low LOD (S/N = 3, 0.0075–0.03 ng mL⁻¹) and good linearity (0.03–60 ng mL⁻¹, R² > 0.996) for glucocorticoids. Satisfactory reusability and stability were also obtained during the extraction. Finally, the graphene@mSiO₂-C8 composites were successfully applied to the extraction and residue analysis of glucocorticoids in real milk samples. The experimental results showed that this novel approach offered an attractive choice for convenient, efficient and rapid solid-phase extraction of targeted hydrophobic compounds in biological samples.     

Hydrophilic Nb-immobilized magnetic core–shell microsphere – A novel immobilized metal ion affinity chromatography material for highly selective enrichment of phosphopeptides

Rapid and selective enrichment of phosphopeptides from complex biological samples is essential and challenging in phosphorylated proteomics. In this work, for the first time, niobium ions were directly immobilized on the surface of polydopamine-coated magnetic microspheres through a facile and effective synthetic route. The Fe₃O₄@polydopamine-Nb⁵⁺ (denoted as Fe₃O₄@PD-Nb⁵⁺) microspheres possess merits of high hydrophilicity and good biological compatibility, and demonstrated low limit of detection (2 fmol). The selectivity was also basically satisfactory (β-casein:BSA = 1:500) to capture phosphopeptides. They were also successfully applied for enrichment of phosphopeptides from real biological samples such as human serum and nonfat milk. Compared with Fe₃O₄@PD-Ti⁴⁺ microspheres, the Fe₃O₄@PD-Nb⁵⁺ microspheres exhibit superior selectivity to multi-phosphorylated peptides, and thus may be complementary to the conventional IMAC materials.     

Generation of sulfate radicals by supported ruthenium catalyst for phenol oxidation in water

In this study we report the preparation of RuO₂/Fe₃O₄@nSiO₂@mSiO₂ core–shell powder mesoporous catalyst for heterogeneous oxidation of phenol by peroxymonosulfate (PMS) as oxidant. The properties of this supported catalyst were characterized by SEM–EDS (scanning electron microscopy–energy dispersive X-ray spectroscopy), XRD (powder X-ray diffraction), TEM (transmission electron microscopy), and nitrogen adsorption–desorption. It is found that using ruthenium oxide-based catalyst is highly effective in activating PMS for related sulfate radicals. The effects of catalyst loading, phenol concentration, PMS concentration, reaction temperature, and reusability of the as-prepared catalyst on phenol degradation were investigated. In RuO₂/Fe₃O₄@nSiO₂@mSiO₂ mesoporous catalyst, Oxone (PMS) was effectively activated and 100 % phenol degradation occurred in 40 min. The magnetic RuO₂/Fe₃O₄@nSiO₂@mSiO₂ catalyst was facility separated from the solution by an external magnetic field. To regenerate the deactivated catalyst and improve its catalytic properties, three different methods involving annealing in air, washing with water, and applying ultrasonics were used. The catalyst was recovered thoroughly by heat treatment.     

Inherently hydrophilic mesoporous channel coupled with metal oxide for fishing endogenous salivary glycopeptides and phosphopeptides

Both glycosylation and phosphorylation exert crucial rule in multitudinous biological processes. For in-depth profiling of glycosylation and phosphorylation, a magnetic metal oxide is effectively coupled with inherently hydrophilic mesoporous channels (denoted as Fe₃O₄@TiO₂@mSiO₂-TSG). Based on the mechanism of hydrophilic interaction liquid chromatography (HILIC) and metal oxide affinity chromatography (MOAC), the Fe₃O₄@TiO₂@mSiO₂-TSG nanomaterial shows high capacity for simultaneously enriching glycopeptides and phosphopeptides. With human saliva collected in successive four days as practical biological sample, endogenous glycopeptides and phosphopeptides are efficiently enriched. Further gene ontology analysis reveals that the identified endogenous glycopeptides and phosphopeptides participate in diverse molecular functions and biological processes. This strategy is anticipated to promote variation analysis of salivary post-translational modifications.     

Magnetic graphene oxide modified with choline chloride-based deep eutectic solvent for the solid-phase extraction of protein

Four kinds of green deep eutectic solvents (DESs) based on choline chloride (ChCl) have been synthesized and coated on the surface of magnetic graphene oxide (Fe₃O₄@GO) to form Fe₃O₄@GO-DES for the magnetic solid-phase extraction of protein. X-ray diffraction (XRD), vibrating sample magnetometer (VSM), Fourier transform infrared spectrometry (FTIR), field emission scanning electron microscopy (FESEM) and thermal gravimetric analysis (TGA) were employed to characterize Fe₃O₄@GO-DES, and the results indicated the successful preparation of Fe₃O₄@GO-DES. The UV–vis spectrophotometer was used to measure the concentration of protein after extraction. Single factor experiments proved that the extraction amount was influenced by the types of DESs, solution temperature, solution ionic strength, extraction time, protein concentration and the amount of Fe₃O₄@GO-DES. Comparison of Fe₃O₄@GO and Fe₃O₄@GO-DES was carried out by extracting bovine serum albumin, ovalbumin, bovine hemoglobin and lysozyme. The experimental results showed that the proposed Fe₃O₄@GO-DES performs better than Fe₃O₄@GO in the extraction of acidic protein. Desorption of protein was carried out by eluting the solid extractant with 0.005 mol L⁻¹ Na₂HPO₄ contained 1 mol L⁻¹ NaCl. The obtained elution efficiency was about 90.9%. Attributed to the convenient magnetic separation, the solid extractant could be easily recycled.     

Tetrahydrofuran–water extraction,in-line clean-up and selective liquid chromatography/tandem mass spectrometry for the quantitation of perfluorinated compounds in food at the low picogram per gram level

A new solvent extraction system was developed for extraction of PFCs from food. The extraction is carried out with 75:25 (v/v) tetrahydrofuran:water, a solvent mixture that provides an appropriate balance of hydrogen bonding, dispersion and dipole–dipole interactions to efficiently extract PFCs with chains containing 4–14 carbon atoms from foods. This mixture provided recoveries above 85% from foods including vegetables, fruits, fish, meat and bread; and above 75% from cheese. Clean-up with a weak anion exchange resin and Envi-carb SPE, which were coupled in line for simplicity, was found to minimize matrix effects (viz. enhancement or suppression of electrospray ionization). The target analytes (PFCs) were resolved on a perfluorooctyl phase column that proved effective in separating mass interferences for perfluorooctane sulfonate (PFOS) in fish and meat samples. The mass spectrometer was operated in the negative electrospray ionization mode and used to record two transitions per analyte and one per mass-labeled method internal standard. The target PFCs were quantified from solvent based calibration curves. The limits of detection (LODs) were as low as 1–5 pg analyte g⁻¹ food; by exception, those for C₄ and C₅ PFCs were somewhat higher (25–30 pg g⁻¹) owing to their less favourable mass response. To the best of our knowledge these are among the best LODs for PFCs in foods reported to date. The analysis of a variety of foods revealed contamination with PFCs at levels from 4.5 to 75 pg g⁻¹ in 25% of samples (fish and packaged spinach). C₁₀–C₁₄ PFCs were found in fish, which testifies to the need to control long-chain PFCs in this type of food. The proposed method is a useful tool for the development of a large-scale database for the presence of PFCs in foods.     

Dispersive micro-solid-phase extraction of benzodiazepines from biological fluids based on polyaniline/magnetic nanoparticles composite

In this study, diverse types of Fe₃O₄ nanocomposites modified by polyaniline, polypyrrole, and aniline–pyrrole copolymer were synthesized through chemical oxidative polymerization process for dispersive-μ-solid phase extraction (D-μ-SPE) in the presence of various dopants. The results showed that the nanocomposite modified by polyaniline with p-toluene sulfonic acid as a dopant demonstrated higher extraction efficiency for lorazepam (LRZ) and nitrazepam (NRZ). Also the synthesized magnetic sorbents were characterized. The nanocomposite sorbent in combination with high performance liquid chromatography–UV detection was applied for the extraction, preconcentration and determination of lorazepam and nitrazepam in urine and plasma samples. Different parameters influencing the extraction efficiency including: sample pH, amount of sorbent, sorption time, elution solvent and its volume, salt content, and elution time were optimized. The obtained optimal conditions were: sample pH, 6; amount of sorbent, 5 mg; sorption time, 5.0 min; elution solvent and its volume, 0.5 mM cethyltrimethyl ammonium bromide in acetonitrile, 150 μL; elution time, 2.0 min and without addition of NaCl. The calibration curves were linear in the concentration range of 1–2000 μg L⁻¹. The limits of detection (LODs) were achieved in the range of 0.5–1.8 μg L⁻¹ for NRZ and 0.2–2.0 μg L⁻¹ for LRZ, respectively. The percent of extraction recoveries and relative standard deviations (n = 5) were in the range of 84.0–99.0, 6.1–7.8 for NRZ and 90.0–99.0, 4.1–7.0 for LRZ, respectively. Ultimately, the applicability of the method was successfully confirmed by the extraction and determination of NRZ and LRZ in human urine and plasma samples.     

固相萃取-超高效液相色谱-电喷雾串联质谱法同时测定地表水中16种全氟有机化合物

建立了固相萃取-超高效液相色谱-电喷雾串联三重四极杆质谱联用技术分析水中16种全氟有机化合物的高通量检测方法。样品经WAX固相萃取柱富集和净化后,采用Waters ACQUITY UPLC^TM BEH C₁₈色谱柱,含2 mmol/L乙酸铵的甲醇和含2 mmol/L乙酸铵的水作为流动相进行梯度洗脱,质谱采用电喷雾负离子电离,多反应监测模式检测。16种全氟有机化合物在0.5~100 μg/L或1.0~100 μg/L浓度范围内线性关系良好,相关系数为0.9987~0.9999,方法的检出限为0.06~0.46 ng/L;高、中、低3个添加水平的回收率为67.6%~103%,相对标准偏差为2.94%~12.0%。结果表明,该方法灵敏、准确且检测范围广,分析速度快,是一种适于实际水样中全氟有机化合物检测分析的方法。