Die Darstellung der Oligosilane Si8 X 18 (X-Cl,OCH3) durch Photolyse von Silylquecksilberverbindungen

The formation of SiSi-bonds by a photochemical reaction of silylmercury compounds is described. The silylmercury compounds [(X ₃Si)₃Si]₂Hg (X=Cl, OCH₃) were synthesized via theVyazankin Hydrid method with (X ₃Si)₃SiH and Bis(t-butyl)mercury. By UV-irradiation of these products in hexane as a solvent, the oligosilanes [(X ₃Si)₃Si]₂ are formed in good yields. All these compounds are charactericed by spectroscopical methods.

     

Photoinitiated processes in 1-p-tolylsulfonylazo-2,4,6,8-tetrakis(tert-butyl)phenoxazine

New photochromic compound 1-p-tolylsulfonylazo-2,4,6,8-tetrakis(tert-butyl)phenoxazine containing the intramolecular hydrogen bond NH...N and the corresponding model structures 2,4,6,8-tetrakis(tert-butyl)-1-(veratroylazo)phenoxazine and 2,4,6,8-tetrakis(tert-butyl)-N-acetyl-1-(p-tolylsulfonylazo)phenoxazine were synthesized and studied. The data obtained suggested the mechanism of the photoreaction resulting in the accumulation of betaine 1-hydroxy-2,4,6,8-tetrakis(tert-butyl)-10-tolylsulfonylphenoxazin-9-one. The photochromic transformations in the molecule under study are due to intramolecular proton phototransfer followed by E–Z-isomerization about the N–N bond and the formation of betaine 1-hydroxy-2,4,6,8-tetrakis(tert-butyl)-10-tolylsulfonylphenoxazin-9-one. The molecular and crystal structure of the photoproduct was studied by X-ray analysis.     

四个基于间苯二(取代水杨醛酰腙)的有机锡配合物的溶剂热合成、结构和荧光性能

采用间苯二（取代水杨醛酰腙）（H₄L）与R₃²SnOH溶剂热反应,或间苯二甲酰肼、3-叔丁基水杨醛和三环己基氢氧化锡一锅溶剂热法反应,合成了4个新的有机锡配合物（SnR²）₂L（1~4）,其中,H₄L=m-Ph（CONH—N=CH（o-OH） PhR¹）₂;R¹=NEt₂,R²=Ph（1）;R¹=3,5-di-tert-butyl=3,5-t-2Bu,R²=Ph（2）;R¹=3,5-t-2Bu,R²=Cy（3）;R¹=3-tert-butyl=3-t-Bu,R²=Cy（4）。经元素分析、红外光谱和（¹H、¹³C、¹¹9Sn）核磁共振谱表征,并用X射线衍射方法确证配合物1~4的结构。配体H₄L的2个取代水杨醛酰腙链向内取向并与锡原子配位形成3个内向E型配合物1~3,取代水杨醛酰腙链向外取向并与锡原子配位形成外向E型配合物4。配合物1、2和4属于三斜晶系P1空间群,配合物3属于单斜晶系P2₁/c空间群。中心锡与配位原子构成畸形双角三锥构型。配体、配合物-三氯甲烷溶液的荧光性能表明,当具有弱荧光的配体m-Ph（CONH—N=CH（o-OH） PhNEt₂）₂（H₄L¹）和无荧光的配体m-Ph（CONH—N=CH（o-OH） Ph（3,5-t-2Bu））₂（H₄L²）分别与苯基锡、环己基锡配位后,配合物-三氯甲烷溶液发出强荧光。     

Synthese und Eigenschaften einigerp-tolyl-phenylsubstituierter Di- und Trisilane und von 1,1,1,3,3,3-Hexaphenyltrisilan

The synthesis and properties of [Ph ₂ p-TolSi]₂, [Ph ₂ p-TolSi]₂SiPh ₂, [Ph ₃ Si]₂Si(p-Tol)₂, [Ph ₂ p-TolSi]₂Si(p-Tol)₂ and (SiPh ₃)₂SiH₂ are described. The silanes are identified using IR,Ra- and²⁹Si-NMR-spectroscopy.

     

Products of Photo- and Thermochemical Rearrangement of 19-Membered di-tert-Butyl-Azoxybenzocrown

The preparation and characterization of products of the photochemical and thermochemical rearrangements of 19-membered azoxybenzocrowns with two, bulky, tert-butyl substituents in benzene rings in the para positions to oligooxyethylene fragments (meta positions to azoxy group, i.e., t-Bu-19-Azo-O have been presented. In photochemical rearrangement, two colored typical products were expected, i.e., 19-membered o-hydroxy-m,m′-di-tert-butyl-azobenzocrown (t-Bu-19-o-OH) and 19-membered p-hydroxy-m,m′-di-tert-butyl-azobenzocrown (t-Bu-19-p-OH). In experiments, two colored atypical macrocyclic derivatives, one 6-membered and one 5-membered ring, bearing an aldehyde group (t-Bu-19-al) or intramolecular ester group (t-Bu-20-ester), were obtained. Photochemical rearrangement led to one more macrocyclic product being isolated and identified: a 17-membered colorless compound, without an azo moiety, t-Bu-17-p-OH. The yield of the individual compounds was significantly influenced by the reaction conditions. Thermochemical rearrangement led to t-Bu-20-ester as the main product. The structures of the four crystalline products of the rearrangement—t-Bu-19-o-OH, t-Bu-19-p-OH, t-Bu-20-ester and t-Bu-17-p-OH—were determined by the X-ray method. Structures in solution of atypical derivatives (t-Bu-19-al and t-Bu-20-ester) and t-Bu-19-p-OH were defined using NMR spectroscopy. For the newly obtained hydroxyazobenzocrowns, the azo–phenol⇄quinone–hydrazone tautomeric equilibrium was investigated using spectroscopic methods. Complexation studies of alkali and alkaline earth metal cations were studied using UV-Vis absorption spectroscopy. ¹H NMR spectroscopy was additionally used to study the cation recognition of metal cations. Cation binding studies in acetonitrile have shown high selectivity towards calcium over magnesium for t-Bu-19-o-OH.     

Reactions of organotin chlorides R2SnCl2 (R = Et, But, or Ph) with lithium 4,6-di( tert -butyl)- N -(2,6-diisopropylphenyl)- o -amidophenolate. Synthesis and structures of tin( IV ) o -iminoquinone complexes

The exchange reactions of tin diorganohalides R₂SnCl₂ (R = Et, Bu^t, or Ph) with lithium amidophenolate APLi₂ (AP is the 4,6-di(tert-butyl)-N-(2,6-diisopropylphenyl)-o-iminobenzo-quinone dianion) in tetrahydrofuran produced the new five-coordinate (Et₂SnAP(THF) (3)) and four-coordinate (R₂SnAP (R = Bu^t, Ph)) tin(IV) complexes. The reaction of Ph₂SnCl₂ with APLi₂ in a nonpolar solvent (hexane or toluene) is accompanied by the additional redox process giving rise to the paramagnetic complex Ph₂Sn(ImSQ)Cl (6) (ImSQ is the 4,6-di(tert-butyl)-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone radical anion). The molecular structures of complexes 3 and 6 were established by X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 253–258, February, 2007.     

Deprotection of a primary Boc group under basic conditions

Treatment of a primary t-butyl carbamate (Boc) group with excess sodium t-butoxide in slightly wet tetrahydrofuran or 2-methyltetrahydrofuran provides the corresponding primary amine in excellent yield. We believe the reaction proceeds through an isocyanate intermediate.     

Stereoselective epoxidation of 3-trans-benzylideneisoborneol

2-Benzylidenecyclopentanol ( 2 ) can be epoxidized stereoselectively to furnish 2-trans-benzylidene-1β-hydroxycyclopentane β-oxide ( 4 ) with either t-butyl hydroperoxide in the presence of vanadium catalyst or m-chloroperoxybenzoic acid. Epoxidation of 3-trans-benzylideneisoborneol ( 10 ) with t-butyl hydroperoxidevanadium catalyst furnishes stereoselectively 3-trans-benzylideneisoborneol exo-oxide ( 11 ) whereas epoxidation of alcohol 10 with m-chloroperoxybenzoic acid furnishes stereoselectively 3-trans-benzylideneisoborneol endo-oxide ( 14 ).     

Synthesis and Complexation Studies of a Tetra(N,N-dimethyl) Aminoethylamide p-tert-butyl Calix[4]arene and Its Tetramethylammonium Derivative

We describe the synthesis of two functionalised p-tert-butyl calix[4]arenes: tetra(N,N-dimethyl) aminoethylamide derivative 1 and related tetramethylammonium 2. Their complexation properties towards alkali and zinc metal cations are reported along with complexation of perchlorate anion by 2.     

Kinetic modeling of the ethylbenzene/xylene isomerization reaction over HZSM-5 zeolites revisited

In this article, a binderless dealuminated HZSM-5 zeolite (Si/Al = 41.4) was used as a catalyst for the isomerization of a mixture of ethylbenzene and xylene. The experimental results indicated that at low residence times the catalyst is effective to isomerize the ethylbenzene into xylenes. A comprehensive kinetic model considering chemisorption, surface chemical reactions, and diffusional processes was developed for this reaction. The intrinsic activation energy (71.99 kJ mol⁻¹) for the surface reaction of ethylbenzene into m-xylene was calculated for the first time, and the corresponding intrinsic activation energies for o-xylene to m-xylene and m-xylene to p-xylene surface reactions were calculated to be 59.45 and 50.68 kJ mol⁻¹, respectively. Lower apparent values have been reported in the literature, and we rationalize that they correspond to multistep processes and intrinsically include a negative activation energy pertaining to chemisorption. The results also revealed that the ethylbenzene diffusion within the zeolite channels was four orders of magnitude smaller than p-xylene.     

Catalytic oxidation of α-pinene by transition metal using t-butyl hydroperoxide and hydrogen peroxide

The allylic oxidation of α-pinene 1 was investigated using various catalytic systems. By a proper choice of the latter, the reaction can be directed toward the selective synthesis of verbenol 2 or verbenone 3. High yield into verbenone was achieved under mild conditions with copper salts as catalysts and t-butyl hydroperoxide (TBHP) as oxidant. On the other hand, when Pd(acac)₂ was used with hydrogen peroxide, verbenol was obtained as the main product.     

p-(Chloro-tert-butyl)cumene hydroperoxide

Oxidation of a mixture ofm- andp-(chloro-tert-butyl) cumenes (12:88) by molecular oxygen gives onlyp-(chloro-tert-butyl)cumene hydroperoxide in a high yield; this product can be used for the synthesis of the pyrethroid ethofenprox. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1248–1250, June, 1998.     

REDUCTIVE DEIMINATION OF SULFOXIMIDES AND SULFIMIDES WITH P-TOLUENESULFONYL NITRITE AND T-BUTYL THIONITRATE1

Abstract

Reduction of sulfimides and sulfoximides with p-toluenesulfonyl nitrite, a new nitrosating agent, gave nearly quantitatively the corresponding deimination products, sulfides and sulfoxides, respectively. In the reaction of dialkyl and aryl alkyl sulfoximides with t-butyl thionitrate, N-t-butylthiosulfoximides were obtained besides the usual deimination products, although diaryl sulfoximides were readily deiminated to the corresponding sulfoxides in good yields in the same treatment. t-Butyl thionitrate was also found to deiminate diphenyl sulfimide to give diphenyl sulfide in good yield. Sulfoximides reacted sluggishly with t-butyl thionitrite, however, eventually affording a small amount of sulfoxides.     

Design and Development of Zeolite-Based Catalytic Processes for Aromatics Production

Processes for the production of xylenes, which occur in an integrated aromatic complex, are discussed. A brief overview of the work carried out at Indian Petrochemicals Corporation Limited for the development of zeolite-based catalytic processes for the production of aromatics is presented. This includes xylene isomerization, transalkylation and disproportionation of C₇ and C₉ aromatics for maximization of xylenes, selective disproportionation of toluene and selective alkylation of mono-alkylaromatics to p-dialkylbenzene. Achievements in the commercialization of zeolite-based catalysts and processes for isomerization of m-xylene to p- and o-xylene along with dealkylation of ethylbenzene, and for selective ethylation of ethylbenzene to produce p-diethylbenzene are highlighted.     

Strukturelle Abwandlungen an partiell silylierten Kohlenhydraten mittels Triphenylphosphan/Azodicarbonsäurediethylester, 4. Mitt.: Transformationen an Mannose und Galaktose

Reaction of methyl -D-galactopyranoside (1) with two equivalents oft-butyldimethylchlorosilane yields methyl 2,6-bis-O-(tBDMSi)--D-galactopyranoside (1 b), methyl 3,6-bis-O-(tBDMSi)--D-galactopyranoside (1 c) and methyl 4,6-bis-O-(tBDMSi)--D-galactopyranoside (1 d). Likewise methyl -D-mannopyranoside (6) affords methyl 2,6-bis-O-(tBDMSi)--D-mannopyranoside (6 d) and methyl 3,6-bis-O-(tBDMSi)--D-mannopyranoside (6 b), which can be isomerised withTPP/DEAD to methyl 4,6-bis-O-(tBDMSi)--D-mannopyranoside (6 f). Methyl 6-O-(tBDMSi)--D-galactopyranoside (1 a) and methyl 6-O-(tBDMSi)--D-mannopyranoside (6 a) can be prepared from1 or6 with one equivalent oft-butyldimethylchlorosilane.Without an external nucleophile the sugar derivatives1 a and1 b react withTPP/DEAD to form the 3,4-carbonato--D-galactopyranosides1 h and1 i and the 3,4-carbonato-2-O-ethoxycarbonyl--D-galactoside (1 j). In contrast to the formation of the compound1 i by means ofTPP/DEAD the reaction of1 a withTPP and Di-t-butyl-azodicarboxylate (DTBAD) yields the 2,3-anhydro--D-taloside (4 b) and only a small amount of1 i. The epoxide4 b can be cleaved withp-nitrobenzoylchloride/pyridine to the 3-chloro-3-deoxy-2,6-di-O-p-nitrobenzoyl--D-idoside (5). Reaction of1 c and1 d withTPP/DEAD yields the 2,3-anhydro--D-gulopyranoside (2), which can be transformed with NaN₃/NH₄Cl to the 2-azido-2-deoxy--D-idopyranoside (3).Likewise6 a and6 d can be converted to the 3,4-anhydro--D-talosides (7 a and7 b). Reaction of7 b or6 d withTPP/DEAD/NH₃ leads to 3,4-anhydro-2-azido-2-deoxy--D-galactopyranoside (8) and 3-azido-3-deoxy--D-altropyranoside (10), resp.The epoxide7 b is opened with NaN₃/NH₄Cl to the 4-azido-4-deoxymannosides (11 a and11 c) and the 3-azido-3-deoxy--D-idopyranoside (12), while the epoxide8 affords the 2,4-di-azido-2,4-dideoxy--D-glucopyranoside (9).Structures were elucidated by¹H-NMR-analysis of the corresponding acetates.

H. H. Brandstetter undE. Zbiral, Helv., im Druck.     

Selective alkylation of xylenes by alcohols on zeolite catalysts

The peculiarities of catalytic performance of crystalline aluminosilicates of different types and compositions (X, Y including dealuminated Y, mordenite, pentasil ZSM-5), as well as of amorphous aluminosilicate catalyst in conversion of xylene + alcohol mixtures were studied. New data were obtained for alkylation ofo-xylene withtert-butyl alcohol, concerning controlling the selectivity and stability of the zeolite catalysts in reactions proceeding with the participation of water, including the water evolved during the reaction, in particular by controlling the acidic properties and hydrophobycity of the zeolites. A catalyst ensuring production of 1,2-dimethyl-4-tert-butylbenzene (DMTBB) with a 94% yield and selectivity of alcohol conversion to the target product of 94–97% was developed. The catalyst can be used as the basis for a high-performance and environmentally safe method for the synthesis of DMTBB. The catalysts developed can be also used for selective alkylation ofo-xylene by C₃-C₅ alcohols and for alkylation ofm-xylene bytert-butyl alcohol.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No, 12, pp, 2912–2917, December, 1996.     

Thermally reversible polymer systems by cyclopentadienylation. I. A model for termination by cyclopentadienylation of olefin polymerization

The reaction between tert-butylchloride (t-BuCl) and dimethylcyclopentadienylaluminum (Me₂AlCPD) was studied as a model for initiation by the tert-butyl cation (t-Bu^⊕) and termination by cyclopentadienylation by the Me₂Al(CPD)Cl^? counteranion of isobutylene polymerization. All reaction products formed in this model system have been identified and quantitatively determined. A comprehensive scheme that indicates pathways to these products was developed (scheme III). It is proposed that the predominant product, tert-butylcyclopentadiene (t-BuCPD), arises in the collapse of the t-Bu^⊕-Me₂Al(CPD)Cl^? ion pair, mainly by CPD^? transfer to the tert-butyl cation. The minor products are neopentane (t-BuMe) and isobutylene (i-C₄H₈), which are probably formed, respectively, by Me^? transfer to and proton loss from the t-butyl cation. Cyclopentadienylation selectivity increases by lowering the temperature and extrapolation of results suggests 100% cyclopentadienylation at ?55°C. The t-BuCl/Me₂AlCPD ratio strongly influences the overall reaction pathway. The reaction is first order in t-BuCl with ΔE_a of ca. 7 kcal/mole (1,2-dichloroethane or chlorobenzene solvents, +24 to ?29°C). Indirect evidence indicates that the kinetic product of cyclopentadienylation is 5-t-BuCPD and that this isomer cannot be tert-butylated; that is, the initiation of 5-t-BuCPD polymerization by t-Bu^⊕ is sterically unfavorable. Detailed analysis of the chemistry and kinetics of the t-BuCl/Me₂AlCPD model system holds important clues to the controlled polymerization of olefins leading to macromolecules with cyclopentadiene (CPD) termini.     

Synthesis of isomeric β-haloethylthienopyrroles

The preparation of ethyl 4-(2-bromoethyl)thieno[2,3-b]pyrrole-5-carboxylate and ethyl 6-(2-bromoethyl)thieno[3,2-b]pyrrole-5-carboxylate by reaction of t-butyl 2-(2-thienyl)carbazate and t-butyl 2-(3-thienyl)carbazate with ethyl-5-bromo-2-oxopentanoate are described.     

Effective synthesis of methyl 3β-amino-3-deoxybetulinate

A practical method for preparing methyl 3β-amino-3-dexoybetulinate that is based on column chromatographic separation of 3α- and 3β-t-butoxycarbonates and subsequent removal of the protecting group using formic acid is proposed. The structure of methyl 3β-N-(t-butoxycarbonyl)-3-deoxybetulinate was established by an x-ray structure analysis. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 488–490, September-October, 2008.     

Tetrahydropyridines and furans from the reaction of 4-t-butylpyridine 1-oxide with t-butyl and 1-adamantyl mercaptan

The reaction of 4-t-butylpyridine 1-oxide (1) with t-butyl or 1-adamantyl mercaptan in acetic anhydride yielded the expected 2- and 3-alkylthio-4-t-butylpyridines and 1-acetyl-2,6-bis-(alkylthio)-3-acetoxy-4-t-butyl- and the unexpected 1-acetyl-2-acetoxy-3,6-bis(alkylthio-4-t-butyl-1,2,3,6-tetrahydropyridines. The addition of t-butyl mercaptan to a solution of 1 in acetic anhydride containing triethylamine produced the expected 1-acetyl-2-t-dmtylthio-3-acetoxy-4-t-butyl-6-hydroxy-1,2,3,4-tetrahydropyridine ( 6a ) and the unexpected 1-acetyl-2,6-bis(hydroxy)-3-t-butylthio-4-t-butyl-1,2,3,6-tetrahydropyridine. Mild alkaline hydrolysis of 6a yielded predominantly 2-[(acetamido) (t-butylthio)methyl]-3-t-butyl-5-hydroxy-2,5-dihydrofuran. The latter was converted by very mild acidic reagents to the corresponding furan and with 2,4-dinitrophenylhydrazine and sulfuric acid furnished 3-t-butylfurfural 2,4-dinitrophenyl-hydrazone.