Stereochemistry in cationic polymerization of alkenyl ethers. III. Effect of the alkoxy group on the steric structure of polymers

Propagation mechanism in the cationic polymerization of alkenyl ethers was investigated through the effect of the bulkiness of alkoxy groups on the steric structure of a polymer. In polymerization with BF₃O(C₂H₅)₂ in toluene at ?78°C, trans-propenyl ethers having less bulky alkoxy groups–methyl, ethyl, and benzyl propenyl ethers–produced a stereoregular polymer having a threo-meso structure, and the cis isomer a nonstereoregular one having threo-meso and racemic structures. On the other hand, in the polymerization of propenyl ethers having bulky alkoxy groups–isopropyl and 1-methylpropyl propenyl ethers–the trans isomer yielded a nonstereoregular polymer with threo-meso and racemic structures, and the cis isomer a stereoregular one with a erythro-meso structure. This result suggests that a bulky alkoxy group plays an important role in determining the steric structure of the polymer by repulsion between the alkoxy groups of a growing chain end and of a monomer. The effect of solvent polarity on the steric structure of a polymer was also studied.     

Cationic polymerization of α,β-disubstituted olefins. IV. Stereospecific polymerization of propenyl alkyl ethers catalyzed by BF3·O(C2H5)2 and Al2(SO4)3–H2SO4 complex

The cis- and trans-propenyl alkyl ethers were polymerized by a homogeneous catalyst [BF₃·O(C₂H₅)₂] and a heterogeneous catalyst [Al₂(SO₄)₃–H₂SO₄ complex]. Methyl, ethyl, isopropyl, n-butyl and tert-butyl propenyl ethers were used as monomers. The steric structure of the polymers formed depended on the geometric structures of monomer and the polymerization conditions. In polymerizations with BF₃·O(C₂H₅)₂ at ?78°C., trans isomers produced crystalline polymers, but cis isomers formed amorphous ones except for tert-butyl propenyl ether. On the other hand, highly crystalline polymers were formed from cis isomers, but not from the trans isomers in the polymerization by Al₂(SO₄)₃–H₂SO₄ complex at 0°C. The x-ray diffraction patterns of the crystalline polymers obtained from the trans isomers were different from those produced from the cis isomers, except for poly(methyl propenyl ether). The reaction mechanism was discussed briefly on these basis of these results.     

Stereochemistry in cationic polymerization of alkenyl ethers. I. 1H- and 13C-NMR spectra of poly(propenyl ethers)

Benzyl, ethyl, and deuterated ethyl propenyl ethers (BzPE, EPE, and EPE-d₅, respectively) with different cis/trans isomer ratios were polymerized by BF₃O(C₂H₅)₂ at ?78°C in toluene, methylene chloride, and nitroethane solvents. Poly(propenyl alcohol) [poly(PA)] was also prepared by treating poly(BzPE) with HBr gas. The steric structure of these polymers was studied by ¹H- and ¹³C-NMR spectroscopy. The poly(EPE-d₅) obtained from a trans-rich monomer mixture was crystalline, while one from a cis-rich monomer mixture was amorphous. Poly(BzPE) was always amorphous. Poly(BzPE), poly(PA), and poly(EPE-d₅) gave ¹H-NMR spectra with two β-methine peaks, relative intensities of which depended on the geometric structure of the monomers. Their spectra of β-methyl protons decoupled from β-methine proton were also split into two peaks, relative intensities of which corresponded to those of the two α-methine peaks. ¹³C-NMR spectra of α-OCH₂ and β-CH₃ of poly(EPE), respectively, consisted of two peaks. These observations show that the poly(propenyl ethers) examined, whether crystalline or amorphous, have only two dyad structures (probably threo or erythro-meso and racemic), and that their α- and β-carbons have the same dyad structure, irrespective of the kind of the alkoxyl groups.     

Stereoelective cationic polymerization of propenyl ether by asymmetric catalysts

In order to elucidate the possibility of stereoelective cationic polymerization (asymmetric selective polymerization) of olefinic monomers, racemic cis- and trans-1-methylpropyl propenyl ether and racemic 1-methylpropyl vinyl ether were polymerized by asymmetric alkoxyaluminum dichlorides. In the polymerization of racemic cis-1-methylpropyl propenyl ether with (?)-menthoxyaluminum dichloride in toluene at ?78°C, the polymer obtained showed a positive optical activity, and the residual monomers were converted by BF₃OEt₂ into a polymer having a negative optical activity. Thus, the stereoelective polymerization of racemic cis-1-methylpropyl propenyl ether was beyond any doubt attained in homogeneous cationic polymerization. In the polymerization of the trans isomer by the same catalyst, an optically active polymer was hardly formed. In the polymerization of racemic 1-methylpropyl vinyl ether which has no β-methyl group, stereoelectivity was not observed at all. The cis-1-methylpropyl propenyl ether did not produce an optical active polymer in the polymerization catalyzed by (S)-1-methylpropoxyaluminum dichloride or (S)-2-methylbutoxyaluminum dichloride under the same polymerization conditions.     

Cationic polymerization of α,β-disubstituted olefins. XV. Stereospecific polymerization of butenyl ethers by cationic catalysts

Methyl, ethyl, and isopropyl butenyl ethers, CH₃CH₂CH?CHOR, were polymerized with homogeneous catalysts at ?78°C. Toluene, methylene chloride, and nitroethane were used as solvents, and BF₃O(C₂H₅)₂ and SnCl₄·CCl₃CO₂H were used as catalysts. The stereoregularity of the polymers were compared by x-ray diagrams and infrared absorption ratios. The stereoregularity of polymers increased with increasing content of the trans isomer in the monomer and with increasing polarity of the solvent. In the polymerization of methyl and ethyl butenyl ethers, crystalline polymers were obtained from both the trans and cis isomers. The crystalline polymer prepared from the trans isomer and that from the cis isomer had the same steric structure. This behavior is quite different from that observed in the polymerization of propenyl ethers. It is concluded that the bulkiness of the group on the olefinic β-carbon plays an important role in the stereospecific polymerization of α,β-disubstituted olefins.     

Living cationic polymerization of cis- and trans-ethyl propenyl ethers and synthesis of block copolymers with isobutyl vinyl ether

The cationic polymerization of cis- and trans-ethyl propenyl ethers (EPE, CH₃? CH?CH? O? C₂H₅), initiated by a mixture of hydrogen iodide and iodine (HI/I₂ initiator) at ?40°C in nonpolar media (toluene and n-hexane), led to living polymers of controlled molecular weights and a narrow molecular weight distribution (MWD) (M?_w/M?_n = 1.2–1.3). The geometrical isomerism of the monomer did not affect the living character of the polymerization. ¹³C NMR stereochemical analysis of the polymers showed that the living propagating end is sterically less crowded than nonliving counterparts generated by conventional Lewis acids (e.g., BF₃OEt₂). New block copolymers between EPE (cis or trans) and isobutyl vinyl ether were also prepared by sequential living polymerization of the two monomers.     

Stereochemistry in cationic polymerization of alkenyl ethers. V. Stereochemistry of acetal additions as model reactions for the polymerization of alkenyl ethers

Acetal additions to β-substituted vinyl ethers having a variety of substituents (alkenyl ethers) were stereochemically investigated as model reactions for their cationic polymerization. The reactions catalyzed by BF₃O(C₂H₅)₂ in CH₂Cl₂ at O°C gave 1:1 adducts, the steric structure of which was determined by means of ¹³C-NMR spectroscopy. trans-Alkenyl ethers always gave adducts with a single structure stereospecifically, indicating that the intermediate carbocation attacks a trans-alkenyl ether from a definite direction independent of the bulkiness of substituents. On the other hand, cis-alkenyl ethers formed adducts with two steric structures, and the direction of cation addition was found to depend on the bulkiness of the alkoxy group involved. The above trends were in agreement with the results for poly(alkenyl ether)s and allowed detailed discussion of the stereochemistry of the propagation processes in alkenyl ether polymerizations.     

Cationic polymerization of α,β-disubstituted olefins. VI. Steric structure of poly(methyl propenyl ether) obtained by cationic catalysts

The steric structure of poly(methyl propenyl ether) obtained by cationic polymerization was studied by NMR spectra. From the analysis of β-methyl and α-methoxyal spectra, it was found that the tacticities of the α-carbon were different from those of the β-carbon in all polymers obtained. In the crystalline polymers obtained from the trans isomer by homogeneous catalysts, BF₃·O(C₂H₅)₂ or Al(C₂H₅)Cl₂, and from the cis isomer by a heterogeneous catalyst, Al₂(SO₄)₃–H₂SO₄ complex, the structure of polymers was threo-di-isotactic. Though the configurations of all α-carbons were isotactic, a small amount of syndiotactic structure was observed in the β-carbon. On the other hand, in the amorphous polymer obtained from cis isomer by the homogeneous catalyst, the configuration of the α-carbon was isotactic, but that of the β-carbon was atactic. These facts suggest that the type of opening of a monomeric double bond is complicated, or that carbon–carbon double bond in an incoming monomer rotates in the transition state. From these experimental results, a probability treatment was proposed from the diad tacticity of α,β-disubstituted polymers. It shows that the tacticity is decided by a polymerization mechanism different from that proposed by Bovey.     

Converting dipyrrinones to lactim ethers to fluorescent N,N′-difluoroboryl derivatives

A high-yield straightforward conversion of lactams to lactim ethers is shown by the conversion of (10H)-dipyrrin-1-ones to (11H)-dipyrrin-1-ol methyl and ethyl ethers in 90% yield from heating in neat trimethyl or triethyl phosphite at 160°C. Unlike the parent dipyrrinones, which form intermolecularly hydrogen-bonded dimers in CHCl₃, their lactim ethers are shown to be monomeric by vapor pressure osmometry. The latter react with boron trifluoride etherate to N,N′-bridged BF₂ derivatives that exhibit strong fluorescence (φ_F 0.6–0.8) near 535 nm. X-Ray crystal structures were obtained of the lactim ethyl ether of kryptopyrromethenone and the BF₂ derivative of the lactim ethyl ether 2,3-diethyl-7,8-dimethyl-(10H)-dipyrrin-1-one.     

Converting dipyrrinones to lactim ethers to fluorescent <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′-difluoroboryl derivatives

A high-yield straightforward conversion of lactams to lactim ethers is shown by the conversion of (10H)-dipyrrin-1-ones to (11H)-dipyrrin-1-ol methyl and ethyl ethers in 90% yield from heating in neat trimethyl or triethyl phosphite at 160°C. Unlike the parent dipyrrinones, which form intermolecularly hydrogen-bonded dimers in CHCl₃, their lactim ethers are shown to be monomeric by vapor pressure osmometry. The latter react with boron trifluoride etherate to N,N′-bridged BF₂ derivatives that exhibit strong fluorescence (φ_F 0.6–0.8) near 535 nm. X-Ray crystal structures were obtained of the lactim ethyl ether of kryptopyrromethenone and the BF₂ derivative of the lactim ethyl ether 2,3-diethyl-7,8-dimethyl-(10H)-dipyrrin-1-one. Correspondence: David A. Lightner, Department of Chemistry, University of Nevada, Reno, Nevada 89557-0020 USA.     

Cationic copolymerization of phenyl propenyl ethers

Ring-substituted phenyl propenyl ethers were found to form homopolymers without any rearrangement by metal halides. Phenyl propenyl ethers were less reactive than the corresponding phenyl vinyl ethers in cationic polymerization. In order to study the electronic effect of a substituent on the reactivity, cis-p-Cl,p-CH₃, and p-CH₃O-phenyl propenyl ethers were copolymerized with phenyl propenyl ether in methylene chloride at ?78°C with stannic chloride–trichloroacetic acid, and their ¹H- and ¹³C-NMR spectra were measured. The reaction constant ρ against Hammett σ_p was ?2.1. The cis-phenyl propenyl ethers were slightly more reactive than the corresponding trans isomers. On the other hand, an o-methyl group decreased the reactivity of phenyl propenyl ether. The low reactivity of o-methyl phenyl propenyl ether was attributed to the steric hindrance between the propagating carbocation and the monomer.     

Living cationic polymerization of α‐methyl vinyl ethers using SnCl4

Cationic polymerization of α‐methyl vinyl ethers was examined using an IBEA‐Et_1.5AlCl_1.5/SnCl₄ initiating system in toluene in the presence of ethyl acetate at 0 ～ ?78 °C. 2‐Ethylhexyl 2‐propenyl ether (EHPE) had a higher reactivity, compared to corresponding vinyl ethers. But the resulting polymers had low molecular weights at 0 or ?50 °C. In contrast, the polymerization of EHPE at ?78 °C almost quantitatively proceeded, and the number‐average molecular weight (M_n) of the obtained polymers increased in direct proportion to the EHPE conversion with quite narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ 1.05). In monomer‐addition experiments, the M_n of the polymers shifted higher with low polydispersity as the polymerization proceeded, indicative of living polymerization. In the polymerization of methyl 2‐propenyl ether (MPE), the living‐like propagation also occurred under the reaction conditions similar to those for EHPE, but the elimination of the pendant methoxy groups was observed. The introduction of a more stable terminal group, quenched with sodium diethyl malonate, suppressed this decomposition, and the living polymerization proceeded. The glass transition temperature of the obtained poly(MPE) was 34 °C, which is much higher than that of the corresponding poly(vinyl ether). This poly(MPE) had solubility characteristics that differed from those of poly(vinyl ethers). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2202–2211, 2008     

Multifunctional coupling agents for living cationic polymerization. IV. Synthesis of end-functionalized multiarmed poly(vinyl ethers) with multifunctional silyl enol ethers

Telechelic ( 8 ) and end-functionalized four-arm star polymers ( 9 ) were synthesized through the coupling reactions of end-functionalized living poly(isobutyl vinyl ether) ( 5; DP _n ～ 10) with the bi-and tetrafunctional silyl enol ethers, H_4-nC? [CH₂OC₆H₄C(OSiMe₃) = CH₂]_n ( 3: n = 2; 4: n = 4). The precursor polymers 5 were prepared by living cationic polymerization with functionalized initiators, CH₃CH(Cl)OCH₂CH₂X(6), in conjunction with zinc chloride in methylene chloride at ?15°C. The initiators 6 were obtained by the addition of hydrogen chloride gas to vinyl ethers bearing pendant functional groups X , including acetoxy [? OC(O)CH₃], styryl (? OCH₂C₆H₄-p-CH = CH₂), and methacryloyl [? OC(O)C(CH₃) = CH₂]. The coupling reactions with 3 and 4 in methylene chloride at ?15°C for 24 h afforded the end-functionalized multiarmed polymers ( 8 and 9 ) in high yield (>91%), where those with styryl or methacryloyl groups are new multifunctional macromonomers. © 1994 John Wiley & Sons, Inc.     

Stereochemie des Übergangszustandes aliphatischer CLAISEN-Umlagerungen. Vorläufige Mitteilung

The stereochemistry of the transition state in the CLAISEN rearrangement of crotyl propenyl ethers ( 2 ) has been established. By heating trans, cis-, cis, cis- and trans, trans-crotyl propenyl ether at 142,5°, erythro and threo 2, 3-dimethylpent-4-en-1-al ( 3 and 4 ) were obtained. From the ratio 3/4 it was shown that the rearrangement of the three ethers largely involves (97–98%) a chair-like transition state.     

Cationic polymerization of α,β-disubstituted olefins. Part 17. Effect of polymerization conditions on the reactivity of alkenyl ethers relative to vinyl ethers

In order to clarify the propagation reaction, vinyl ether was copolymerized with the corresponding alkenyl ether under various conditions. cis-Propenyl ether (cis-PE) was several times more reactive than trans-PE and the corresponding vinyl ether in the copolymerization catalyzed by BF₃ · O(C₂H₅)₂ in toluene. However, the reactivity of cis-PE relative to trans-PE and the vinyl ether was found to be greatly decreased with increasing polarity of the solvent and to be very close to unity in such polar solvents as nitroethane. On the other hand, the reactivity of trans-IBPE relative to IBVE was scarcely changed by polymerization conditions. Also, the nature of the initiator and polymerization temperature affect the reactivity of cis-PE relative to the vinyl ether. These phenomena were explained by the relative stability of the bridged and open car bonium ions based on the polarity of the solvent and steric hindrance due to substituents in the trans isomer.     

Gel formation in cationic polymerization of divinyl ethers. III. Effect of oligooxyethylene chain versus oligomethylene chain as central spacer units

Cationic polymerizations of two series of divinyl ethers were carried out to clarify the effects of their central spacer chain structure on their crosslinking polymerization behavior. One series of the monomers involves divinyl ethers with an oligooxyethylene central spacer chain: diethylene glycol divinyl ether ( O‐3 ), triethylene glycol divinyl ether ( O‐4 ), tetraethylene glycol divinyl ether ( O‐5 ), pentaethylene glycol divinyl ether ( O‐6 ), and heptaethylene glycol divinyl ether ( O‐8 ) (see Scheme 1 ). The other series includes divinyl ethers with an oligomethylene central spacer chain: 1,4‐butanediol divinyl ether ( C‐4 ), 1,6‐hexanediol divinyl ether ( C‐6 ), and 1,8‐octanediol divinyl ether ( C‐8 ). Cationic polymerizations of these monomers were carried out with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in methylene chloride (CH₂Cl₂) at ?30 °C ([Monomer]₀ = 0.15 M; [HCl]₀ = 5.0 mM; [ZnCl₂]₀ = 0.5 mM). The polymerizations of the oligomethylene‐based divinyl ethers C‐6 and C‐8 caused gel formation at high monomer conversions (～90%), whereas C‐4 formed soluble polymers even at almost 100% monomer conversion. The oligooxyethylene‐based divinyl ethers O‐3 , O‐4 , O‐5 , and O‐6 underwent gel‐free polymerizations up to 100% monomer conversion and O‐8 did so at least up to ～80% conversion. The content of unreacted pendant vinyl groups of the obtained soluble polymers was measured by ¹H NMR spectroscopy. In the polymerizations of the oligomethylene‐based divinyl ethers ( C‐4 , C‐6 , and C‐8 ), the vinyl contents of the polymers decreased monotonously with increasing monomer conversion, and their number‐average molecular weights (M_n's) and polydispersity ratios (M_w/M_n's) increased considerably just before the gelation occurred. On the contrary, the vinyl contents of the polymers obtained from the oligooxyethylene‐based divinyl ethers ( O‐3 , O‐4 , O‐5 , O‐6 , and O‐8 ) decreased steeply even in the early stage of the polymerizations and almost all the pendant vinyl ether groups were consumed in the soluble polymers at the final stage of the polymerizations. The oligooxyethylene spacer units adjacent to the pendant unreacted vinyl ether groups may solvate intramolecularly with the carbocationic active center to accelerate frequent occurrence of intramolecular crosslinking reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3729–3738, 2004     

Synthesis and properties of poly(cis-1,4-dihydroxy-2,3-epoxybutane)

The cyclic acetone ketal of 1,4-dihydroxy-2,3-epoxybutane (DMTO) polymerizes with i-Bu₃Al-0.7 H₂O catalyst by a cationic mechanism at ?78°C to a moderate molecular weight (η_inh up to 0.7), atactic (based on ¹³C-NMR) polymer (PDMTO). At higher temperature and in bulk, up to 14% crosslinked polymer is obtained as a result of epoxide and ketal ring opening. Triethylaluminum is an effective catalyst at 0–50°C in bulk. Coordination catalysts were less effective but the results indicate that an effective one can be designed. PDMTO is readily hydrolyzed with aqueous HCl treatment to atactic, water-soluble poly(1,4-dihydroxy-2,3-epoxybutane) (PDHEB) with a T_g of 80°C. PDHEB is melt stable to 200°C and can be molded to give brittle, clear films that readily pick up 5–10% H₂O from the atmosphere to give properties like those of plasticized poly(vinyl chloride). PDHEB is degraded by electron beam radiation but can be crosslinked with glyoxal plus toluene sulfonic acid/The bis(trimethylsilyl) ether of cis-1,4-dihydroxy-2,3-epoxybutane was polymerized cationically with the i-Bu₃Al-0.7 H₂O catalyst at ?78°C to a fairly tactic, presumably racemic di-isotactic, amorphous polymer, with η_inh of 0.16. A mechanism is proposed for this stereoregular polymerization based on a complexation of the Si side group of the last chain unit with the propagating oxonium on.     

Structure and reactivity in cationic polymerization of butadiene derivatives. IV. 1-alkoxybutadienes

The reactivity of trans-1-alkoxybutadienes in cationic homopolymerization and copolymerizations and structure of the polymers produced were investigated. 1-Ethoxybutadiene is polymerized easily at ?78°C by various acidic catalysis. The reactivity of 1-ethoxybutadiene was similar to that of ethyl vinyl ether. The polymers produced possessed molecular weights of several thousands, and were composed of 70–95% 1,4 structure and 5–30% 3,4 structure. In the copolymerization of ethyl vinyl ether (M₁) with 1-ethoxybutadiene at ?78°C in toluene by boron trifluoride diethyl etherate, r₁ = 1.15, r₂ = 2.62. From the Hammett plot of the relative reactivities of alkoxybutadienes (alkoxy: CH₃O, C₂H₅O, i-C₃H₇O), the reaction constant _p^* was determined to be ?2.9. Results of the present study were compared with those of various butadiene derivatives.     

Synthesis and Helical Structure of Poly(1‐methylpropargyl ester)s with Various Side Chains

Optically active 1‐methylpropargyl esters bearing various substituents were polymerized with [(nbd)Rh]⁺[η⁶‐C₆H₅B(C₆H₅)₃]^? (nbd=norbornadiene) as a catalyst to afford the corresponding poly(1‐methylpropargyl ester)s with moderate molecular weights in good yields. The polymers have a cis‐stereoregular structure, which was determined by ¹H NMR spectroscopy. Large optical rotations and clear CD signals demonstrated that all these polymers take on a helical structure with a predominantly one‐handed screw sense. The polymers exhibited large viscosity indices in the range 1.14–1.75. Chiral amplification was observed in R/S copolymerization. Conformational analysis revealed that the polymers form a tightly twisted helical structure with a dihedral angle of 70° at the single bond of the main chain.     

Stereospecific polymerization of α-methylstyrene by friedel-crafts catalysts

The relationship between stereoregularity and polymerization conditions of α-methylstyrene has been studied by means of NMR spectra. The effects of solvents and various Freidel-Crafts catalysts have been investigated. The stereoregularity of poly-α-methylstyrene increased with increased polymer solubility in the solvent used and with decreasing polymerization temperature. This behavior is completely different from the stereospecific polymerization of vinyl ethers and methyl methacrylate in homogeneous systems. This may be due to the strong steric repulsion exerted by the two substituents in the α-position of α-methylstyrene. For example, with BF₃ · O(C₂H₅)₂ as catalyst at ?78°C., atactic polymer is obtained in n-hexane, a nonsolvent for α-methylstyrene, whereas highly stereoregular polymer is produced in toluene or methylene chloride, good solvents for the polymer. However, the polarity of the solvent and the nature of the catalyst hardly affect the stereoregularity of the polymer.