Blends of organosilicon polymers with polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide)

Blends of organosilicon polymers with polystyrene, PS, and poly(2,6-dimethyl-1,4-phenylene oxide), PPE, were investigated by transmission electron microscopy and differencial scanning calorimetry. Blends with poly(tetramethylsilphenylenesiloxane), PTMPS, showed a morphology characterized by globular domains dispersed in the organic matrix. An apparent homogeneous system was observed when poly(dimethylsilphenylene), PDSP, was mixed with PPE. A crystalline phase was found in samples with a higher PDSP content. The morphology of PS/PDSP blends with low PDSP content showed a dendritic phase dispersed in the PS-rich matrix. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2609–2616, 1997     

Chemical modification of poly(2,6-dimethyl-1,4-phenylene oxide) by bromination-alkynylation

The chemical modification of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) by bromination of the aromatic ring, followed by displacement of bromine with substituted acetylenes, has been investigated. This pathway leads to a series of novel copolymers containing substituted alkynes on the aromatic ring. The degree of bromination and alkynylation, determined by ¹H-NMR, was in the range of 20–85 and 15–80%, respectively. ¹³C-NMR and FT-IR unambiguously elucidated the structure of the alkynylated polymers. Finally, thermal properties and permeation properties of substituted PPO to carbon dioxide, methane, oxygen, and nitrogen are reported. © 1994 John Wiley & Sons, Inc.     

Electrochemical stability and transformations of fluorinated poly(2,6-dimethyl-1,4-phenylene oxide)

Fluorination of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) leads to narrowing of its window of electrochemical stability in a cathodic range of potentials. It is found this is connected with appearance of both perfluorinated and incompletely fluorinated units in the polymer. The former units are liable to electrochemical reduction (at potentials <−2.0 V) followed by elimination of fluorine anions and the latter react with basic products (generated at potentials <−1.8 V) of electrochemical reduction of the background solution. In the both cases this results in appearance of conjugated multiple bonds in the fluorinated macromolecules. Quantities of these units in fluorinated PPO were determined with a help of direct and indirect electrochemical reductive degradation techniques.     

Molecular relaxation in the blends of polystyrene/poly(2,6-dimethyl-1,4-phenylene oxide) at low temperature

Molecular relaxation behavior in terms of the α, β, and γ transitions of miscible PS/PPO blends has been studied by means of DMTA and preliminary work has been carried out using DSC. From DSC and DMTA (by tan δ), the observed α relaxation (T_α or T_g) of PS, PPO, and the blends, which are intermediate between the constituents, are in good agreement with earlier reports by others. In addition, the β transition (T_β) of PS at 0.03 Hz and 1 Hz is observed at −30 and 20°C, respectively, while the γ relaxation (T_γ) is not observed at either frequency. The T_β of PPO is 30°C at 0.03 Hz and is not observed at 1 Hz, while the T_γ is −85°C at 0.03 Hz and −70°C at 1 Hz. On the other hand, blend composition-independent β or γ relaxation observed in the blends may be a consequence of the absence of intra- or intermolecular interaction between the constituents at low temperature. Thus it is suggested that at low temperature, the β relaxation of PS be influenced solely by the local motion of the phenylene ring, and that the β or γ relaxation of PPO be predominated by the local cooperative motions of several monomer units or the rotational motion of the methyl group in PPO. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1981–1986, 1998     

A novel synthetic method for preparing poly(2,6-dimethyl-1,4-phenylene oxide)/polystyrene alloy in reactor containing aqueous medium

Considering the defect of solution polymerization of 2,6-dimethylphenol (DMP), the low molecular weight of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) synthesized in water and difficulty in processing of PPO, a novel one-pot synthetic method for preparing PPO/PS alloy in reactor containing aqueous medium was proposed based on green chemistry. In the presence of styrene, DMP was polymerized to form PPO, and then styrene was in situ polymerized under the initiation of dibenzoyl peroxide (BPO) and dicumyl peroxide (DCP), finally thermodynamically compatible PPO/PS alloy was prepared. It was found that the introduction of styrene during the oxidative polymerization of DMP could increase the molecular weight of PPO. When styrene content was 50 wt%, for the synthesized PPO/PS alloy the yield and the weight-average molecular weight were determined to be 95% and 1.7 × 10⁵ for PPO, 93% and 2.0 × 10⁵ for PS, respectively.     

Miscible blends of zinc-neutralized sulfonated polystyrene and poly(2,6-dimethyl 1,4-phenylene oxide)

Zinc-neutralized sulfonated polystyrene ionomers (ZnSPS) and poly(2,6-dimethyl 1,4-phenylene oxide) homopolymer (PXE) form miscible blends up to at least 7.8 mol % sulfonation, as measured by thermal and mechanical criteria. The addition of an equal weight of PXE raises the glass transition temperature of ZnSPS by 40–50°C. However, this miscibility is not achieved by eradicating the microdomain structure present in ZnSPS, even though the PXE coils are considerably larger than the spacings between ionic aggregates. Small-angle x-ray scattering indicates that while the average interaggregate spacing is roughly the same in ZnSPS and its 50/50 blend with PXE at a given sulfonation level, the extent of phase separation is reduced upon PXE addition, indicating that more ionic groups are dispersed in the matrix. Factors influencing miscibility in the ZnSPS/PXE materials and related blends are discussed.     

Effect of styrene-4-vinyl pyridine diblock copolymer on morphological,thermal, and mechanical properties of poly(2,6-dimethyl-1,4-phenylene ether)/polyethylene ionomer blends

The compatibilizing effects of a styrene-4-vinyl pyridine diblock copolymer on the properties of immiscible poly(2,6-dimethyl-1,4-phenylene ether) (PPE)/polyethylene ionomer (Surlyn) blends are investigated by examining the phase morphology and the thermal and mechanical properties. The block copolymer is synthesized by sequential anionic polymerization at ?78°C and melt-mixed with PPE and Surlyn at 290°C. When a small amount of block copolymer is present, the domain size of the dispersed phase becomes smaller. The tensile strength and elongation at break increase with addition of the block copolymer for PPE-rich matrix blends, whereas the tensile strength increases but the elongation at break decreases for Surlyn-rich matrix blends. These effects are interpreted in terms of the interfacial activity and the reinforcing effect of the block copolymer. From the experimental results, it is concluded that the block copolymer plays a role as an effective compatibilizer for PPE/Surlyn blends. © 1994 John Wiley & Sons, Inc.     

以硝基、氨基修饰改性聚苯醚

将聚苯醚硝化、还原,分别合成了硝化聚苯醚和胺化聚苯醚,最高硝基、氨基取代度分别为95%、65%.讨论了各种反应条件对取代度的影响,并对修饰改性的聚苯醚进行了表征。     

Ternary upper-critical-solution-temperature behavior in a blend system comprising poly(2,6-dimethyl-1,4-phenylene oxide), poly(4-methyl styrene), and polystyrene

 Upper-critical-solution-temperature (UCST) behavior in a ternary blend of poly(2,6-dimethyl-1,4-phenylene oxide), poly(4-methyl styrene), and polystyrene is reported. The as-cast ternary blend is immiscible at ambient conditions and comprises two different phases, and, however, turns into a miscible system above the “clarity point” ranging from 160 to 300 °C for different ternary compositions. The maximum clarity point is labeled as the UCST for the ternary system, which is about 295 °C. Above the clarity point, the originally immiscible ternary blend turned into one miscible phase. Owing to the thermodynamic UCST behavior and kinetic hindrance, the immiscible ternary polymer blend can be locked into a pseudo-miscible state if it is heated to a temperature above the clarity point followed by a rapid-cooling processing scheme. The quenched ternary blend can remain in a pseudo-miscible state as long as the service temperature does not exceed the glass-transition temperature of the blend. Received: 17 July 2001 Accepted: 3 October 2001     

以硝基,氨基酸饰改性聚苯醚

聚苯醚硝化，还原，分别合成了硝化聚苯醚和胺化聚苯醚，最高硝基，氨基取代度分别为９５％，６５％，讨论了各种反应条件对取代度的影响，并对修饰改性的聚苯醚进行了表征。     

Model reactions for preparing poly(imino-tetrafluoro-1,4-phenylene)

2,3,4,5,6-Pentafluoroformanilide was prepared giving, in addition, two new compounds 4,5,6,7-tetrafluoro-1-pentafluorophenyl-benzimidazole and 2,3,4,5-tetrafluoro-6-[(pentafluorophenyl)amino]formanilide. Sodium 2,3,4,5,6-pentafluoro-formanilide was reacted with hexafluorobenzene in a molar ratio of 1:4 to give oligomers of α-pentafluorophenyl-ω-fluoro-poly(imino-tetrafluoro-1,4-phenylene). Some of the oligomers were isolated. The results indicate that poly(imino-tetrafluoro-1,4-phenylene) could be formed. Model reaction on hexafluorobenzene with sodium acetanilide, molar ratio 1:2, gave a low yield of N,N′-diacetyl-diphenyl-tetrafluoro-1,4-phenylenediamine.     

Preparation of poly(1,4-phenylene)s by electro-oxidative polymerization

The effect of substituents on the electropolymerization of benzene derivatives and the redox properrties of the corresponding polymers were determined using Brown's substituent constants (σ⁺). Electron-donating groups lower the oxidation potential by which increase in the current efficiency was observed. However, stabilization of the produced cation radicals by the electron-donating groups resulted in a decrease in the polymerization efficiency. The appropriate values of σ⁺ for the efficient polymerization ranged near ?1.5.     

Miscibility of blends of poly(2,6-dimethyl 1,4-phenylene oxide) with polystyrene-based ionomers and copolymers

Blends of poly(2,6-dimethyl 1,4-phenylene oxide) (PPhO) with the copolymer poly(styrene-co-methacrylic acid) (PS-MAA) and the ionomer poly(styrene-co-sodium methacrylate) (PS-MAA-Na), up to 10 mol% co-unit content, were investigated by dynamic mechanical thermal measurements. The PPhO/PS-MAA-Na blends are compared with PS/PS-MAA-Na blends. The blends of PPhO with PS-MAA are no longer miscible at 10 mol% acid content; this is attributed to a copolymer effect induced by the reduction of PS-PPhO interactions due to the presence of the MAA group which does not interact favorably with PPhO. The blends of PPhO with the ionomer are already immiscible at the lowest ion content studied (2.4 mol%), but become increasingly so as ion content is increased. Despite favorable PS-PPhO interactions, these blends are only a little more miscible than the PS/PS-MAA-Na blends. This is attributed to a combination of the increasing importance of the ionomer cluster phase (from which the homopolymer chains presumably are excluded) as ion content is increased, and of a copolymer effect between the homopolymers and the unclustered phase of the ionomer. These results are compared with published data indicating that blends of PPhO with another biphasic ionomer, zinc sulfonated polystyrene, are miscible. The contrasting behavior is rationalized in part by the suggestion that the copolymer effect between PPhO and the unclustered phase of the latter ionomer, but not of the former, is absent; this is related to multiplet structure and sizes. The analysis made of the above systems is extended to predict what might be the miscibility behavior between PPhO and other PS-based ionomer and related copolymer systems. © 1993 John Wiley & Sons, Inc.     

Poly (2,6-dimethyl-1,4-phenylene oxide)/poly (butadiene) diol interpenetrating polymer networks: Phase morphological characteristics and glass transition temperature behavior

The fracture surface topography of simultaneous interpenetrating polymer networks (SIN'S) of poly (2,6-dimethyl-1,4 phenylene oxide) (PPO)/poly (butadiene) diol was examined by scanning electron microscopy (SEM). The phase morphology of the IPNs is highly dependent on PPO/poly (butadiene) diol mass ratio. A single-phase morphology of the IPNs was achieved when the content of poly (butadiene) diol is below 40 wt % in the initial composition. The SEM observations are also wholly consistent with the glass transition temperature behavior obtained in the differential scanning calorimetric (DSC) measurements. © 1994 John Wiley & Sons, Inc.     

OXIDATIVE POLYMERIZATION BEHAVIOR OF 2,6-DIMETHYLPHENOL IN AQUEOUS MEDIA WITH POTASSIUM FERRICYANIDE

The effects of potassium ferricyanide,sodium n-dodecyl sulfate,sodium hydroxide and temperature on the molecular weight and the yield of poly(2,6-dimethyl-1,4-phenylene oxide)(PPO) synthesized in an aqueous medium were studied.It was found that oxygen in air had little influence on the oxidative polymerization of 2,6-dimethylphenol(DMP) in the aqueous medium,and potassium ferricyanide was only an oxidant during the oxidative polymerization of DMP.Sodium n-dodecyl sulfate could stabilize polymer particles...     

Light-emitting diodes based on poly(2,3-diphenyl-1,4-phenylene vinylene)

In this paper we report polymer light-emitting diodes based on (2,3-diphenyl-1,4-phenylene vinylene) (DP-PPV), a novel π-conjugated polymer made by using the chlorine precursor route (CPR). Thin films of the precursor polymer were formed by spin-casting on indium-tin oxide (ITO) coated glass substrates, followed by thermal conversion to give DP-PPV thin films. Single layer DP-PPV LEDs were completed by thermally evaporating magnesium (Mg) electrodes. The electroluminescent characteristics of ITO/DP-PPV/Mg devices as well as variations between precursor polymer batches are presented. Bilayer LEDs were also made, for which tris(8-hydroxyquinoline)aluminum (Alq₃) was thermally sublimed on the fully converted DP-PPV films in vacuum, followed by Mg deposition. Both significant improvement in the quantum efficiency (up to 0.7% ph/el) and a reduction in the turn-on voltage of the device were found upon incorporation of the Alq₃ layer. These observations suggest that Alq₃ enhances the injection of electrons and also participates in the recombination process. © 1997 John Wiley & Sons, Ltd.     

Synthesis and characterization of poly[2,5-bis(triethoxy)-1,4-phenylene vinylene]

The synthesis of a highly soluble, 2,5-disubstituted poly(p-phenylene vinylene) with pendant side chains containing ether groups was accomplished by a dehydrochlorination route. Specific interactions of the oxygen-containing side chains with the solvent are presumably responsible for the high solubility of the polymer, especially in protogenic solvents. The polymer microstructure was characterized by ¹H- and ¹³C-NMR. The polymer showed solvatochromic properties when dissolved in a variety of solvents. The relatively high molecular weight (M_n = 17,000) permitted the fabrication of free-standing films. The electrical conductivity of iodine-doped films was approximately 2 × 10^–2 S cm^–1. © 1995 John Wiley & Sons, Inc.     

磺化聚苯醚离聚体的溶液性质

研究了磺化度为20.9mol％的磺化聚苯醚(S-PPO)的钠盐和锂盐在四氢呋喃/甲醇混合溶剂中的离聚体行为。S-PPO离聚体在溶液中的链聚集状态与聚合物浓度、阳离子半径密切相关。当Na-SPPO的浓度高于3g/dL时,在30～40℃范围内其聚集度DA与浓度C的关系为:DA=ke~(εc)常数K和β分别表示为与发现链聚集的起始浓度和链聚集速率相关的常数。