交联结构对肝素/壳聚糖层层组装多层膜内皮细胞相容性的影响

采用1-乙基-(3-二甲基氨基丙基)碳酰二亚胺交联技术对具有抗凝血抗菌作用的肝素/壳聚糖多层膜进行交联, 研究了交联结构对多层膜稳定性和血管内皮细胞亲和性的影响. QCM-D结果显示, 交联可有效地提高多层膜的稳定性, 在模拟人体血液流速(3.0 cm/s)下保持良好的稳定. 体外内皮细胞的研究结果显示, 多层膜的交联可有效地调节肝素/壳聚糖多层膜表面粘弹性, 并显著增加内皮细胞的粘附与生长. 交联的肝素/壳聚糖多层膜有望成为理想的心血管功能界面涂层材料.     

Photoinduced Graft Copolymerization onto Chitosan Under Heterogeneous Conditions

Photoinitiated graft copolymerization of acrylamide onto chitosan under heterogeneous conditions and in the absence of a photo initiator was investigated. The effect of irradiation time, the amount of chitosan and monomer concentration on the extent of grafting was examined. The maximum grafting percentage obtained was 294%. The copolymer was characterized using carbon-13 nuclear magnetic resonance (¹³C-NMR) spectroscopy, X-ray diffraction analysis (XRD), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The system designed allows synthesis of grafted chitosan with free amine groups which are otherwise possible only by chemical protection. The swelling properties of copolymer were followed in aqueous solution.     

基于壳聚糖衍生物的蛋白质药物载体材料的制备及性能

在离子液体均相体系中合成了一种新型两亲性窄分子量分布的低聚壳聚糖衍生物月桂基-琥珀酰化壳聚糖(LSCOS). 以LSCOS为载体材料, 以牛血清蛋白(BSA)为模板蛋白, 以戊二醛为交联剂, 用油包水(W/O)乳化交联法制备了包载BSA的BSA/LSCOS缓释载药微球. 通过扫描电子显微镜(SEM)、 透射电子显微镜(TEM)及紫外-可见光谱(UV-Vis)研究了BSA/LSCOS比率和戊二醛/LSCOS比率对微球的形貌结构、 包埋率、 载药率和体外药物释放特性的影响. 结果表明, 在离子液体中合成的LSCOS包覆了BSA, 形成的微球粒径约为1 μm, 微球表面随BSA用量的增加变得光滑, 随戊二醛用量的增加变得粗糙. BSA的累积释放率与BSA包载量成正比, 与交联剂添加量成反比, 因此, 可通过控制蛋白质药物的添加比率和交联剂用量来控制蛋白质药物体外释放率.     

可诱导核酸交联剂的研究进展

如何选择性的破坏癌细胞DNA链结构的药物,一直是研究的热点,可诱导核酸交联剂在增加药物靶标选择性方面有很多的优点,利用氧化、还原或光诱导产生的DNA交联作用,在临床治疗中具有重要意义,本文就可诱导核酸交联剂的最新研究进展做了评述。     

Physico-Chemistry of the Limestone Sulphation Process

Aspects of the mechanism of the overall reaction between CaCO₃/CaO and SO₂/SO₃ under oxidizing conditions are discussed. The limestone and lime sulphation processes were carried out in a thermobalance under conditions relevant to atmospheric fluidized bed combustion. Sulphated samples, prepared in the form of cross-section particles, were examined in a scanning electron microscope by energy-dispersive X-ray and back-scattered electron imaging. Photomicrographs are presented. The reaction proceeded from the outer surface of the particles and along the pores. Surface textural changes during the reaction were considered. The layer of products was identified as controlling both the rate and extent of limestone/lime sulphation. In the products, two sulphur-bearing solids (CaSO₄ and CaS) were identified. The presence of CaS, which may cause difficulties in practice, is attributed to CaSO₃ disproportionation. This revised version was published online in August 2006 with corrections to the Cover Date.     

壳聚糖希夫碱铜多相催化剂的制备及其催化苯乙烯环丙烷反应的研究

采用均相和多相两种方法合成了壳聚糖希夫碱－Cu(Ⅱ)配合物，用于催化苯乙烯的不对称环丙烷反应，考察了不同制备方法和不同铜含量对催化剂催化性能的影响以及催化剂的重复使用情况，当催化剂的铜含量为4．4％时，得到20．7％的ee值。     

Fabrication of Insoluble Elastin by Enzyme-Free Cross-Linking

Elastin is an essential extracellular matrix protein that enables tissues and organs such as arteries, lungs, and skin, which undergo continuous deformation, to stretch and recoil. Here, an approach to fabricating artificial elastin with close-to-native molecular and mechanical characteristics is described. Recombinantly produced tropoelastin are polymerized through coacervation and allysine-mediated cross-linking induced by pyrroloquinoline quinone (PQQ). A technique that allows the recovery and repeated use of PQQ for protein cross-linking by covalent attachment to magnetic Sepharose beads is developed. The produced material closely resembles natural elastin in its molecular, biochemical, and mechanical properties, enabled by the occurrence of the cross-linking amino acids desmosine, isodesmosine, and merodesmosine. It possesses elevated resistance against tryptic proteolysis, and its Young's modulus ranging between 1 and 2 MPa is similar to that of natural elastin. The approach described herein enables the engineering of mechanically resilient, elastin-like materials for biomedical applications.     

壳聚糖的改性及其应用

简要评述了近年来壳聚糖的改性和应用,介绍了接枝共聚、共混及形成聚电解质复合物等改性,以及作为生物医用材料应用方面的研究进展。     

印染污泥的活性炭负载过渡金属化合物非均相催化臭氧化

采用湿式浸渍法,将6种含过渡金属(Cu,Fe,Zn,Ni,Mn,Ce)元素的化合物负载在活性炭（AC）上,制得6种催化剂AC/M(M=Cu,Fe,Zn,Ni,Mn,Ce),在室温条件下,催化臭氧化处理苯酚溶液和印染污泥。 催化剂AC/M通过Boehm滴定、XRD和BET分析进行表征。 苯酚的3种降解方法中,AC/M催化剂的臭氧催化最好,AC/M吸附处理次之,单独臭氧处理的效果最差。 在苯酚的降解处理过程中,AC/M催化臭氧化处理苯酚溶液的效率依次为：AC/Fe＞AC/Zn＞AC/Ni＞AC/Ce＞AC/Cu＞AC/Mn。 AC/M催化剂催化臭氧化效果随溶液pH值的增大而增强。 AC/M催化剂处理印染污泥的效率依次为：AC/Fe＞AC/Zn＞AC/Ce=AC/Ni＞AC/Cu＞AC/Mn,AC/Fe催化臭氧化处理印染污泥可使污泥中有机质含量降低8.17%。     

Chitosan Based Scaffolds by Lyophilization and sc.CO2 Assisted Methods for Tissue Engineering Applications

Porous chitosan scaffolds with possible tissue engineering applications were synthesized by using lyophilization and supercritical carbon dioxide (sc.CO₂) drying technique. 1% Chitosan (CS) solution in aq. acetic acid was treated with 37% formaldehyde solution; the resulting hydrogels were subjected to solvent-exchange prior to the final treatment procedures. Their morphology, pore structure, and physical properties were characterized by Fourier transform infrared spectroscopy (FTIR), thermal analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and the specific surface areas and porosities of scaffolds were determined by using N₂ adsorption. The sc.CO₂ treated scaffolds showed a much greater surface area in comparison to the lyophilized one. Hence, sc.CO₂ treated scaffolds is better for cell proliferation. We further investigated the bioactivity of sc.CO₂ treated scaffolds using simulated body fluid (SBF). The sc.CO₂ assisted chitosan scaffold prepared by using green chemistry approach is highly pure and from a hygienic point of view, it is an ideal material for tissue engineering applications.     

Heterogeneous CuII‐Catalysed Solvent‐Controlled Selective N‐Arylation of Cyclic Amides and Amines with Bromo‐iodoarenes

A selective N‐arylation of cyclic amides and amines in DMF and water, respectively, catalysed by Cu^II/Al₂O₃ has been achieved. This protocol has been employed for the synthesis of a library of arenes bearing a cyclic amide and an amine moiety at two ends, including a few scaffolds of therapeutic importance. The mechanism has been established based on detailed electron paramagnetic resonance (EPR) spectroscopy, X‐ray photoelectron spectroscopy (XPS), UV diffuse reflectance spectroscopy (DRS) and inductively coupled plasma‐mass spectrometry (ICP‐MS) studies of the catalyst at different stages of the reaction. The Cu^II/Al₂O₃ catalyst was recovered and recycled for subsequent reactions.     

壳聚糖的表面活性和聚集

壳聚糖是甲壳素的脱乙基产物 ,作为唯一的阳离子型聚电解质天然多糖 ,具有许多独特的性质 ,在生物、医学、食品、水处理等许多领域有广泛的应用或呈现出诱人的应用前景 [1～ 4].然而 ,从表面化学的角度 ,壳聚糖是否具有表面活性、在水溶液中是否聚集尚是一个有争议的问题 [5、 6].本研究结果表明壳聚糖具有表面活性 ,在水溶液中单个分子就能聚集 ,临界聚集浓度 cac≈ 0,对非极性有机物芘具有明显的增溶作用 .属于结构特殊的阳离子型高分子表面活性 剂 .1实验部分 1.1试剂 　　壳聚糖：以虾壳为原料 ,用稀碱处理除去蛋白质 ,再用稀酸处理除去…     

壳聚糖的光度测定新方法

研究了以刚果红分光光度法测定壳聚糖,探讨了最佳实验条件及干扰因素的影响。在pH9．7时,刚果红和壳聚糖形成有色物质,检测波长为543．5nm,线性方程为：A=0．0200ρ＋0．0156,R^2=0．9978。在0～20．00μg／mL范围内呈现良好的线性关系,平均回收率为99．20％。采用该方法测定了两种复方样品中的壳聚糖,方法的选择性和灵敏度良好。该方法可用于检测复方样品中少量的壳聚糖。     

Preparation of a Montmorillonite-Modified Chitosan Film-Loaded Palladium Heterogeneous Catalyst and its Application in the Preparation of Biphenyl Compounds

The natural polymer chitosan was modified with polyvinyl alcohol to enhance the mechanical properties of the membrane, and then, the montmorillonite-modified chitosan-loaded palladium catalyst was prepared using the excellent coordination properties of montmorillonite. The results showed that the catalyst has good tensile strength, thermal stability, catalytic activity, and recycling performance and is a green catalytic material with industrial application potential.     

壳聚糖及其衍生物水凝胶的研究进展

综述了近年来壳聚糖及其衍生物水凝胶的研究工作进展,介绍了水凝胶的制备方法和应用,尤其是在生物医药方面的广泛应用,并对其未来进行了展望。     

水溶性量子点的制备及其与壳聚糖衍生物的自组装

以3-巯基丙酸(HS-CH2CH2COOH)为稳定剂, 制备了水溶性的碲化镉(CdTe)量子点(QDs), 考察了制备条件对QDs荧光性能的影响及CdTe QDs与壳聚糖及叶酸和聚乙二醇改性的壳聚糖的自组装. 研究发现, 壳聚糖及改性壳聚糖与QDs的复合物荧光强度相对纯的CdTe QDs明显增强, 且QDs被包裹在内核, 复合粒子呈明显的核/壳结构. 改性壳聚糖/QDs复合物较小且尺寸分布更为均一.     

可注射的壳聚糖水凝胶的制备及应用进展

可注射的水凝胶由于其独特的性质在生物医学领域中备受关注。壳聚糖是自然界中唯一的一种阳离子多糖,具有含量丰富、价格低廉、生物相容性和生物可降解性良好等优点,经常被用来制备可注射的水凝胶。近年来,随着研究的进一步深入,通过采用各种化学或物理改性和修饰方法、引入各种生物功能分子或采用各种交联方法,具有优异性能的可注射的壳聚糖水凝胶不断涌现,其应用范围不断扩展,在实际应用中发挥了越来越重要的作用。本文主要介绍了常见的化学交联的和物理交联的可注射的壳聚糖水凝胶的制备方法,综述了其在药物载体、基因载体、细胞支架和伤口修复等生物医学领域中的应用进展,对其存在的问题及发展趋势进行了分析和展望,为可注射的壳聚糖水凝胶的进一步发展提供指导和借鉴。     

甲壳素和壳聚糖的接枝共聚改性

天然高分子甲壳素、壳聚糖由于分子链上大量存在的反应性官能团 ,易于通过自由基引发与乙烯基单体接枝共聚 ,也可与其它高分子链偶合制得接枝共聚物。通过接枝共聚改性 ,可以赋予甲壳素和壳聚糖以某些新的性能 ,扩大了其应用范围。本文对甲壳素、壳聚糖的接枝共聚改性反应进展、机理以及产物的性能等进行了介绍     

Heterogeneous Membrane and Coated Wire Type Electrode with Chitosan as Ionophore in the Potentiometric Determination of Glutamate: Comparative Study

This study reports on two types of glutamate sensors based on chitosan, i) heterogeneous membrane and ii) coated wire (CWE). The linearity ranges are: i) membrane, 1.0×10^?5 to 1.0×10^?1 M and ii) CWE, 1.0×10^?5 to 1.0×10^?3 M. The LODs, and pH ranges are i) membrane, 5.0×10^?6 M and 4–8 and ii) CWE, 1.0×10^?5 M and 3–5, respectively. The presence of ionic species normally found in foodstuffs did not interfere in both electrodes. Interference in CWE was minimized by prior dilution of the sample. The CWE was further investigated for on‐line analysis. The material for proposed electrodes was cheaper and environmental friendly. Hence, they were suggested as alternative tools for the analysis of glutamate.