CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles structural and magnetic stability relative to ball milling

The combustion method has been utilized to generate cobalt spinel ferrite nanoparticles. The generated nanoparticles were ball milled for different times. Physical and chemical properties of the nanoparticles were characterized by X- ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscope (TEM), and vibrating sample magnetometer (VSM). Crystalline structure of the nanoparticles was stable after ball milling. FTIR showed that oxygen-metal bonding was stronger after ball milling. Moreover, the ball milled nanoparticles magnetically were harder than the nanoparticle without ball milling.     

Prenucleation formations in control over synthesis of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanocrystalline powders

Nanocrystalline cobalt ferrite powders were synthesized by hydrothermal treatment of co-precipitated hydroxides in the conditions of an external heating of the autoclave and under microwave heating of the reaction medium. In the microwave-heating mode, the prenucleation clusters formed under ultrasonic treatment of a suspended mixture of cobalt and iron hydroxides is transformed into CoFe₂O₄ nanocrystals during the first minute of synthesis at a temperature satisfying the equilibrium-existence conditions of cobalt ferrite. In the case of a slow external heating of the autoclave, there is no effect of this kind, which is attributed to the disintegration of the prenucleation clusters before the dehydration of the hydroxides to give crystalline cobalt ferrite becomes thermodynamically favorable. The main factor determining the increase in the formation rate of crystallites of CoFe₂O₄ nanopowders and the decrease in their size is the generation of prenucleation centers in the starting mixture of cobalt and iron hydroxides.     

Effect of heat treatment on magnetic MgFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles

MgFe₂O₄ (Mg-ferrite) nanoparticles encapsulated in amorphous SiO₂ were prepared by the wet chemical method. The particle sizes were estimated, based on the X-ray diffraction peaks, to be between 3 and 8 nm, depending on the annealing temperature. The particle size increased as the annealing temperature increased. From the magnetization measurements, the blocking temperature, T _b, was found to be between 30 and 60 K. The magnetization values varied with the annealing or quenching conditions. To clarify the process of crystal growth, thermogravimetric and differential thermal analysis (TG-DTA) measurements were performed and the results were compared with the X-ray diffraction patterns.     

Comparative study of the synthesis of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> and NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> in silica through the polymerized complex route of the sol–gel method

In this work the synthesis of CoFe₂O₄-SiO₂ and NiFe₂O₄-SiO₂ nanocomposites was studied via the sol–gel method, using the polymerized complex route. The polymerized precursors obtained by the reaction of citric acid, ethylene glycol, tetraethylorthosilicate, ferric nitrate, and cobalt nitrate or nickel chloride were characterized by nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy. NMR and IR spectra of the precursors, without and with metallic ions, show the formation of polymeric chains with ester and ether groups and complexes of metal-polymeric precursor. The nanocomposites were obtained by the thermal decomposition of the organic fraction and characterized by X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). XRD patterns show the formation of CoFe₂O₄ and NiFe₂O₄ in an amorphous silica matrix above 400 °C in both cases. When the calcination temperature was 800 °C the particle size of the crystalline phases, calculated using the Scherrer equation, reached ∼35 nm for the two oxides. VSM plots show the ferrimagnetic behavior that is expected for this type of magnetic material; the magnetization at 12.5 KOe of the CoFe₂O₄-SiO₂ and NiFe₂O₄-SiO₂ compounds was 29.5 and 17.4 emu/g, respectively, for samples treated at 800 °C.     

Synthesis of hybrid nanoparticles based on magnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles and luminescent CdS nanoparticles

A new approach to the synthesis of hybrid nanoparticles based on magnetic Fe₃O₄ nanoparticles and CdS quantum dots, combining magnetic and luminescence properties, has been suggested. Conditions for preparation of their stable aqueous suspensions have been found, and their optical properties have been studied. Nanocomposites produced at the molar ratio Fe₃O₄: CdS = 5: 1, which exhibited the luminescence properties) and gave stable aqueous suspensions, have turned out to be most promising. The results are evidence that the synthesized nanoparticles can be used for the development of visualizing agents for in vitro biomedical research.     

Application of spinel-structured MgFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles for simultaneous electrochemical determination diclofenac and morphine

The paper describes a sensitive method for simultaneous sensing of morphine (MOR) and diclofenac (DCF). The surface of a MgFe₂O₄/graphite paste electrode was modified with multi-walled carbon nanotubes, and the resulting sensor was characterized by cyclic voltammetry, differential pulse voltammetry, chronoamperometry, and electrochemical impedance spectroscopy. The electrode showed an efficient synergistic effect in term of oxidation of DCF and MOR, with sharp oxidation peaks occurring at +0.370 and 0.540 V (vs Ag/AgCl) at pH 7.0. The calibration plot for MOR is linear in the 50 nM to 920 μM concentration range, and the detection limit is 10 nM (at a signal-to-noise ratio of 3). The respective data for DCF are 100 nM to 580 μM, with a 60 nM LOD. The sensor was applied to the determination of MOR and DCF in spiked serum and urine samples, with recoveries ranging between 91.4 and 100.7 %.

Open image in new window

Graphical abstract A sensitive method for simultaneous sensing of morphine (MOR) and diclofenac (DCF) is described. The surface of MgFe₂O₄/graphite paste electrode was modified with multi-walled carbon nanotubes, and the resulting sensor showed an efficient synergistic effect in terms of oxidation of DCF and MOR. The calibration plot for MOR is linear in the 50 nM to 920 μM concentration range, and the detection limit is 10 nM. The respective data for DCF are 100 nM to 580 μM, with a 60 nM LOD.

     

LaNi<Subscript>0.5</Subscript>Ti<Subscript>0.5</Subscript>O<Subscript>3</Subscript>/CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>-based sensor for sensitive determination of paracetamol

A novel electrochemical sensor based on LaNi_0.5Ti_0.5O₃/CoFe₂O₄ nanoparticle-modified electrode (LNT–CFO/GCE) for sensitive determination of paracetamol (PAR) was presented. Experimental conditions such as the concentration of LNT–CFO, pH value, and applied potential were investigated. Under the optimum conditions, the electrochemical performances of LNT–CFO/GCE have been researched on the oxidation of PAR. The electrochemical behaviors of PAR on LNT–CFO/GCE were investigated by cyclic voltammetry. The results showed that LNT–CFO/GCE exhibited excellent promotion to the oxidation of PAR. The over-potential of PAR decreased significantly on the modified electrode compared with that on bare GCE. Furthermore, the sensor exhibits good reproducibility, stability, and selectivity in PAR determination. Linear response was obtained in the range of 0.5 to 901 μM with a detection limit of 0.19 μM for PAR.     

Thermodynamic properties of spinel MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript>: A mass spectrometric study

The activities of oxides in stoichiometric spinel MgAl₂O₄ in the temperature range 1851–2298 K were determined from the data obtained by the Knudsen effusion mass spectrometry. The resulting Gibbs energies of spinel formation from simple oxides, the enthalpies and entropies of spinel formation from simple oxides (–12.02 ± 1.14 kJ/mol and 5.03 ± 0.56 J/(mol K), respectively), and the spinel melting enthalpy (55.81 ± 4.62 kJ/mol) satisfactorily agree with the available thermodynamic data.     

Amperometric hydrogen peroxide sensor based on the use of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> hollow nanostructures

The authors report on the preparation of a hollow-structured cobalt ferrite (CoFe₂O₄) nanocomposite for use in a non-enzymatic sensor for hydrogen peroxide (H₂O₂). Silica (SiO₂) nanoparticles were exploited as template for the deposition of Fe₃O₄/CoFe₂O₄ nanosheets, which was followed by the removal of SiO₂ template under mild conditions. This leads to the formation of hollow-structured Fe₃O₄/CoFe₂O₄ interconnected nanosheets with cubic spinel structure of high crystallinity. The material was placed on a glassy carbon electrode where it acts as a viable sensor for non-enzymatic determination of H₂O₂. Operated at a potential of ?0.45 V vs. Ag/AgCl in 0.1 M NaOH solution, the modified GCE has a sensitivity of 17 nA μM^?1 cm^?2, a linear response in the range of 10 to 1200 μM H₂O₂ concentration range, and a 2.5 μM detection limit. The sensor is reproducible and stable and was applied to the analysis of spiked urine samples, where it provided excellent recoveries.

Open image in new window

Graphical abstract Schematic of a cobalt ferrite (CoFe₂O₄) hollow structure for use in electrochemical determination of H₂O₂. The sensor shows a low detection limit, a wide linear range, and excellent selectivity for H₂O₂.

     

Glycine-assisted combustion synthesis and electrochemical behavior of LiNi<Subscript>0.5</Subscript>Mn<Subscript>0.5</Subscript>O<Subscript>2</Subscript> nanoparticles under microwave irradiation

Layered LiNi_0.5Mn_0.5O₂ nanoparticles have been successfully prepared by the glycine-assisted combustion method under microwave irradiation. The exothermic reaction can generate a large quantity of heat rapidly leading to the formation and crystallization of LiNi_0.5Mn_0.5O₂. From the X-ray diffraction and scanning electronic microscopy results, the resulting powders have a well-developed layered structure and average particle-size is about 80 nm. The chemical composition analysis and electrochemical characteristics of the obtained LiNi_0.5Mn_0.5O₂ nanoparticles as cathode material for rechargeable lithium-ion battery were also investigated. The improved electrochemical performances of the layered LiNi_0.5Mn_0.5O₂ nanoparticles might be ascribed to the nanostructure of the powders and the unique combustion synthesis under microwave irradiation.     

Mass spectrometric study of the evaporation of MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> spinel

The evaporation of MgAl₂O₄ spinel is studied via high-temperature Knudsen effusion mass spectrometry in the temperature range of 1850–2250 K. In the gas phase, molecular components typical of the simple oxides in the spinel and traces of gaseous complex oxide MgAlO are identified above the samples. The resulting values of the partial vapor pressures of the molecular components contained in the gas phase over the spinel are compared with those corresponding to simple oxides for the first time.     

Preparation and adsorption of magnetic Co<Subscript>0.5</Subscript>Ni<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript>-chitosan nanoparticles

In this paper, magnetic chitosan microspheres were prepared by the emulsification cross-linking technique, with glutaraldehyde as the cross-linking agent, liquid paraffin as the dispersant, and the Span-80 as emulsifier. The time of cross-linking and the ratio of Co_0.5Ni_0.5Fe₂O₄/chitosan were investigated. The morphology was studied by different instruments. The adsorption performance was investigated and the effects of initial concentration of methyl orange, the time of cross-linking, and the amount of adsorbent were discussed. It is found that the product has uniform morphology when the ratio of magnetic Co_0.5Ni_0.5Fe₂O₄/chitosan is 1 : 2 and the time of cross-linking is 5 h; At room temperature, magnetic Co_0.5Ni_0.5Fe₂O₄–chitosan has a good adsorption toward methyl orange when the magnetic Co_0.5Ni_0.5Fe₂O₄/chitosan dosage is 20 mg.     

Physical and electrochemical properties of LiFe<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> spinel synthesized by different methods

The study deals with the synthesis and comparison of physicochemical properties of LiFe_0.5Mn_1.5O₄ based cathode materials synthesized by the standard ceramic and the auto-ignition method.     

Synthesis of N-2-aryl-substituted 1,2,3-triazoles mediated by magnetic and recoverable CuFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles

An efficient and economic system for the synthesis of N-2-aryl-substituted 1,2,3-triazoles in the presence of CuFe₂O₄ was developed. The corresponding products can be obtained in good to excellent yields. It is interesting to note that the catalyst could be reused for five consecutive trials without significant decreases in its activity.     

Effect of SO<Subscript>2</Subscript> on chlorination of zinc ferrite ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> and a mixture of ZnO and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

Results of thermodynamic calculations and kinetic studies of the reaction of zinc ferrite ZnFe₂O₄ and of a mixture of oxides, ZnO and Fe₂O₃, with chlorine and SO₂ are presented.     

Effects of Ni-ion doping on electrochemical characteristics of spinel LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> powders prepared by a spray-drying method

Spinel LiMn_2−x Ni _x O₄ compounds doped with a range of Ni (x=0–0.06) were synthesized by a spray-drying method. The structure and morphology characteristics of the powders were studied in detail by means of X-ray diffraction (XRD), scanning electron microscopy, and transmission electron microscopy. The XRD data reveal that all the samples have well-defined spinel structure, but, with the increase in Ni content, the doped lithium manganese spinels have smaller lattice constant. The undoped and doped spinel LiMn₂O₄ particles are fine, narrowly distributed, and well crystallized. The electrochemical characteristics of the samples are measured in the coin-type cells in a potential range of 3.2–4.35 V vs Li/Li⁺. All cyclic voltammogram curves exhibit two pairs of redox reaction peaks, but, among them, there are some differences about the peak split. With the increase in the Ni content, the specific capacities of the samples decrease slightly, but their cyclic ability increases.     

Study of electrochemical behavior of the Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles in aprotic media

Peculiarities of electrochemical behavior of the Fe₃O₄ magnetic nanoparticles immobilized on the surface of a platinum electrode in aprotic organic media were investigated. Possible scheme of electrochemical behavior of nanoparticles depending on pre-electrolysis potential (–1.3,–2.5 V) was suggested. The effect of pre-electrolysis time, potential scan rate and nature of supporting electrolyte on the processes investigated was determined. A linear dependence of electrochemical oxidation signal versus the concentration of nanoparticles in modifying suspension in the concentration range of 0.05—0.5 g L^–1 was observed. The results of the performed research allow using magnetite nanoparticles as a direct signal-generating label in electrochemical immunoassay.