SiO2,Al2O3上涂载TiO2,ZrO2,La2O3制备Pd催化剂的研究

采用浸渍法制备了Ｌａ２Ｏ３，ＴｉＯ２，ＺｒＯ２以单层状态分散在ＳｉＯ２，Ａｌ２Ｏ３上的改性载体。用ＸＰＳ求得它们的最大单层分散阈值为：０．２２ｇＬａ２Ｏ３／１００ｍ＾２ＳｉＯ２，０．２７ｇＬａ２Ｏ３／１００ｍ＾２Ａｌ２Ｏ３，０．０４ｇＴｉＯ２／１００ｍ＾２ＳｉＯ２，０．０３６ｇ ＴｉＯ２／１００ｍ＾２Ａｌ２Ｏ３，０．０７ｇＺｒＯ２／１００ｍ＾２ＳｉＯ２，０．０８ｇＺｒＯ２／１００ｍ＾２Ａｌ２Ｏ３．     

Verres du systeme La2S3La2O3Ga2O3Ga2S3

The extent of the glass forming region is described as a function of the composition and of the cooling speed. The shape of this region is explained from the previously described La₂S₃La₂O₃Ga₂O₃Ga₂S₃ phase diagram. Glasses are obtained after relatively slow cooling (5°/min), in a definite region of compositions, which coincides with a relatively large concentration of ternary invariants. The thermal properties (transition temperatures and crystallization temperatures) were measured by DTA. For a relatively large region of compositions, glasses return to the equilibrium conditions with intermediate formation of the La_3.33Ga₆S₁₂O₂ metastable crystalline phase. An approach to the structure of the glasses is made by comparison with the crystal structures of the numerous ternary and quaternary crystalline compounds observed in the system, and by the comparison of the Raman spectra. It appears that these gallium oxysulfide glasses have many structural analogies with germanium sulfide glasses.     

Magnetic and optical investigation of 40SiO2·30Na2O·1Al2O3·(29 − x)B2O3·xFe2O3 glass matrix

Samples of 40SiO₂·30Na₂O·1Al₂O₃·(29 − x)B₂O₃·xFe₂O₃ (mol%), with 0.0 ≤ x ≤ 17.5, were prepared by the fusion method and investigated by electron paramagnetic resonance (EPR), optical absorption (OA) and Mössbauer spectroscopy (MS). The EPR spectra of the as-synthesized samples exhibit two well-defined EPR signals around g = 4.27 and g = 2.01 and a visible EPR shoulder around g = 6.4, assigned to isolated Fe³⁺ ion complexes (g = 4.27 and g = 6.4) and Fe³⁺-based clusters (g = 2.01). Analyses of both EPR line intensity and line width support the model picture of Fe³⁺-based clusters built in from two sources of isolated ions, namely Fe²⁺ and Fe³⁺; the ferrous ion being used to build in iron-based clusters at lower x-content (below about x = 2.5%) whereas the ferric ion is used to build in iron-based clusters at higher x-content (above about x = 2.5%). The presence of Fe²⁺ ions incorporated within the glass template is supported by OA data with a strong band around 1100 nm due to the spin-allowed ⁵E_g–⁵T_2g transition in an octahedral coordination with oxygen. Additionally, Mössbauer data (isomer shift and quadrupole splitting) confirm incorporation of both Fe²⁺ and Fe³⁺ ions within the template, more likely in tetrahedral-like environments. We hypothesize that ferrous ions are incorporated within the glass template as FeO₄ complex resulting from replacing silicon in non-bridging oxygen (SiO₃O⁻) sites whereas ferric ions are incorporated as FeO₄ complex resulting from replacing silicon in bridging-like oxygen silicate groups (SiO₄).     

Refining the Phase Diagram of the System 3Al2O3·2SiO2-ZrO2

The quasi-binary section mullite-zirconium dioxide in the ternary system Al₂O₃-SiO₂-ZrO₂, described by an eutectic phase diagram with T _{e u t} = 1750°C, was studied experimentally.     

209Bi NQR in Mixed Oxides 2Bi2O3· B2O3, 3Bi2O3· 5B2O3, and Bi2O3· 3B2O3

It was earlier found from nuclear quadrupole resonance (NQR) measurements and computer modeling that -Bi₂O₃, Bi₃O₄Br and mixed oxides Bi₂O₃· 2Al₂O₃, Bi₂O₃· 2Ga₂O₃, Bi₂O₃· 3GeO₂, and 2Bi₂O₃· 3GeO₂exhibit local ordered magnetic fields from 30 to 200 G. It thus follows that these compounds are not diamagnets in a conventional sence of the word. With the aim of revealing previously unknown magnetic properties in bismuth(III) oxide-based Main Group element compounds, the mixed bismuth–boron oxides 2Bi₂O₃· B₂O₃, 3Bi₂O₃· 5B₂O₃, and Bi₂O₃· 3B₂O₃were prepared and studied using ²⁰⁹Bi NQR. The quadrupole interactions of the ²⁰⁹Bi nuclei and their electronic environment were studied, the crystallochemical features of the compounds were discussed, and the conformity of the ²⁰⁹Bi results to the X-ray structure data was verified. The preliminary tests in the field of a permanent magnet showed that the resonance intensities increase in external magnetic fields, indicating that a magnetism of unknown nature develops in the titled compounds. It was found reasonable to continue studies of the magnetic properties of these compounds using single-crystal ²⁰⁹Bi NQR in external magnetic fields.     

Die Verbindungen 2SiO2·P2O5 und 2GeO2·P2O5

Zusammenfassung Bei röntgenographischen Untersuchungen im System GeO₂-P₂O₅ wird eine Verbindung der Zusammensetzung 2 GeO₂·P₂O₅ aufgefunden. Einkristallaufnahmen ergeben eine hexagonale (trigonale) Elementarzelle mita=7,99₈ undc=24,8₆ Å. Die schon beschriebene Verbindung 2 SiO₂·P₂O₅ erweist sich als isotyp:a=7,86₂ undc=24,1₃ Å.     

La2O3助剂对Rh/SiO2催化CO加氢反应性能的影响

采用溶胶凝胶法制备了SiO_2和La_2O_3-SiO_2载体,再通过浸渍法分别引入Rh-La和Rh组分,研究考察了La引入方式对Rh/SiO_2催化CO加氢反应性能的影响。结果表明,La的添加有利于提高Rh的分散度,促进Rh+中心数的增加,有效地抑制产物中CO2的生成,提高含氧化合物选择性。此外,La的引入方式会影响La与Rh间的相互作用强弱,Rh和La共浸渍制得的2Rh-5La_2O_3/SiO_2催化剂中Rh-La相互作用较强,削弱的Rh-CO键有利于反应过程中CO的插入反应,使得产物以C_(2+)含氧化合物为主。而La以助剂形式掺入SiO_2制得的2Rh/5La_2O_3-SiO_2催化剂具有较弱的La-Rh相互作用,其产物则以甲醇、乙醇等低碳醇为主。     

掺Eu的SiO2-B2O3体系和SiO2-B2O3-Na2O体系的结构及Eu3+的发光性质

采用溶胶-凝胶技术制备了掺Eu3+的以SiO2-B2O3和SiO2-B2O3-Na2O为基质的玻璃态发光材料. 通过激发光谱、发射光谱研究了Eu3+的发光性质, 通过红外光谱、 TEM 、 XRT进一步研究了基质结构变化对发光性能的影响. 结果显示 材料经 600 ℃退火处理后, 结构已十分稳定. 在588 nm和613 nm处显示弱的Eu3+的特征发射光谱, 对应于Eu3+的5D0-7Fj(j=1,2)跃迁. 以SiO2-B2O3为基质的玻璃材料的红外光谱显示形成了Si-O-B键. 该结构对Eu3+的发光有严重的淬灭作用, 使Eu3+的发光强度大大减弱. 以SiO2-B2O3-Na2O为基质的玻璃材料显示Eu3+的发光增强, 红外光谱显示不存在Si-O-B键的振动吸收. 可能是Na取代B的位置, 形成了Si-O-Na键. 此结构对Eu3+的发光有一定增加作用.     

Thermodynamic properties of two zinc borates: 3ZnO·3B2O3·3.5H2O and 6ZnO·5B2O3·3H2O

Two pure zinc borates with microporous structure 3ZnO·3B₂O₃·3.5H₂O and 6ZnO·5B₂O₃·3H₂O have been synthesized and characterized by XRD, FT-IR, TG techniques and chemical analysis. The molar enthalpies of solution of 3ZnO·3B₂O₃·3.5H₂O(s) and 6ZnO·5B₂O₃·3H₂O(s) in 1 mol · dm⁻³ HCl(aq) were measured by microcalorimeter at T = 298.15 K, respectively. The molar enthalpies of solution of ZnO(s) in the mixture solvent of 2.00 cm³ of 1 mol · dm⁻³ HCl(aq) in which 5.30 mg of H₃BO₃ were added were also measured. With the incorporation of the previously determined enthalpy of solution of H₃BO₃(s) in 1 mol · dm⁻³ HCl(aq), together with the use of the standard molar enthalpies of formation for ZnO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpies of formation of −(6115.3 ± 5.0) kJ · mol⁻¹ for 3ZnO·3B₂O₃·3.5H₂O and −(9606.6 ± 8.5) kJ · mol⁻¹ for 6ZnO·5B₂O₃·3H₂O at T = 298.15 K were obtained on the basis of the appropriate thermochemical cycles.     

NiO－La2O3-Al2O3气凝胶催化剂的制备

采用改进的溶胶－凝胶法和超临界干燥技术制备出超细三元ＮｉＯ－Ｌａ２Ｏ３－Ａｌ２Ｏ３气凝胶催化剂。通过ＢＥＴ、ＴＥＭ、ＤＴＡ、ＩＲ等物性表征,考察了煅烧温度和组成等对气凝胶催化剂制备的影响。结果表明,此种方法制备的多元所凝胶催化剂不仅保留了氧化铝和ＮｉＯ－Ａｌ２Ｏ３气凝胶的主要特征,而且,氧化镧的加入使气凝胶理易晶化,热稳定性更好和吸附能力更强。这种改进的溶胶－凝胶法和超临界干燥技术操作简单有效,适     

La2O3,Y2O3-Mo次级发射材料研究

采用粉末冶金方法制备了La2O3，Y2O3-Mo次级发射材料，测试了各种材料的次级发射系数。结果表明在钼中加入稀土氧化物可以具有很好的次级发射性能。经过激活处理后，材料的最大次级发射系数均高于2．0，达到了材料使用要求的发射水平。应用扫描电镜(SEM)和光电能谱仪(XPS)研究了稀土元素在烧结体断口和发射前后在试样表面的分布情况。分析结果表明稀土元素易于在晶界处偏聚，且发射后试样表面稀土元素的相对浓度明显高于发射前的浓度。     

复合吸附剂SiO2·xH2O·yCaCl2的水蒸气吸附等温线

配制了一种由粗孔球形硅胶和氯化钙组成的新型复合吸附剂SiO2·xH2O·yCaCl2,测得了4个不同氯化钙含量的复合吸附剂样品(氯化钙质量分数分别为0.130,0.2733,0.384和0.510)、CaCl2和粗孔球形硅胶在25℃、35℃及45℃的水蒸气吸附等温线。实验结果表明,复合吸附剂的平衡吸水量随CaCl2质量分数增加而增加,最大可达到粗孔球形硅胶的10倍。用Dubinin-Astakhov方程回归测得的等温线,求得相应的参数。     

The solid-state thermal decomposition of Sr3[La(C2O4)3(H2O)2]2·11H2O

Strontium(II)diaquatris(oxalato)lanthanate(III)unidecahydrate, Sr₃[La(C₂O₄)₃(H₂O)₂]₂·11H₂O, has been synthesized and characterized by elemental, IR and electronic spectral studies. Thermal studies (TG, DTG and DTA) in air showed that all the crystal and coordinated water molecules are removed at ca. 225 °C. The final end product at 1,000 °C was shown to be a mixture of mainly SrCO₃, Sr₃La₄O₉ and La₂Sr₂O₅ along with oxides and carbides of both the metal, through the formation of an intermediate mixture of likely SrC₂O₄ and La₂(C₂O₄)_2.8 at 282 °C, and SrCO₃ and La₂O(CO₃)₂ at 540 °C. The multi-step dehydration and decomposition of the compound has been explored from the DSC study in nitrogen up to 670 °C, and the evaluated kinetic parameters are discussed.     

Y2O3, La2O3, Sm2O3对氧化铝瓷烧结及力学性能的影响

研究了3种稀土氧化物对氧化铝陶瓷烧结性能和力学性能的影响.结果表明 含Y2O3,La2O3,Sm2O3的添加剂促进了氧化铝瓷的烧结,提高了氧化铝瓷的力学性能.Y2O3和Sm2O3掺量为0.50%,La2O3掺量为0.75%时氧化铝瓷在1600或1620 ℃保温2 h烧结,相对密度达98.9%以上,强度超过439 MPa,断裂韧性达5.15 MPa·m1/2以上.微观结构分析表明,Y2O3,La2O3,Sm2O3抑止氧化铝晶粒生长,细化晶粒,使晶粒尺寸较均匀形成致密化结构.