Ultra-thin-layer agarose gel electrophoresis. I. Effect of the gel concentration and temperature on the separation of DNA fragments

A novel, rapid and efficient separation method is described for the analysis of double stranded (ds) DNA fragments in the form of horizontal ultra-thin-layer agarose gel electrophoresis. This separation technique combines the multilane, high-throughput separation format of agarose slab gel electrophoresis with the excellent performance of capillary electrophoresis. The electrophoretic separation of the fluorophore (Cy5)-labeled dsDNA molecules were imaged in real time by a scanning laser-induced fluorescence/avalanche photodiode detection system. Effects of the gel concentration (Ferguson plot) and separation temperature (Arrhenius plot) on the migration characteristics of the DNA fragments are discussed. An important genotyping application is also shown by characterizing the polymorphic region (2× or 4×48 base pair repeats) of the dopamine D₄ receptor gene (D₄DR, exon III region) for ten individuals, using PCR technology with Cy5-labeled primers and ultra-thin-layer agarose gel electrophoresis.     

Prestaining method as a useful tool for the agarose gel electrophoretic detection of polymerase chain reaction products with a fluorescent dye SYBR gold nucleic acid gel stain.

Three staining methods using SYBR Gold Nucleic Acid Gel Stain (SYBR Gold) as a fluorescent dye were evaluated for the agarose gel electrophoretic detection of DNA. The methods involve prestain, in-gel stain, and poststain methods. DNA markers and polymerase chain reaction (PCR) products obtained by minisatellite variant repeat-PCR (MVR-PCR) amplification in a D1S8 locus were used as model DNA and practical samples, respectively. Among the three methods tested under the usual electrophoretic conditions, a prestain method using a 10000-fold diluted SYBR Gold solution showed most excellent features regarding cost and rapidity to use with good stainability and resolution over loaded DNA amounts of about 98 ng to 300 ng. The prestain method was found to be applicable to the analysis of DNA in MVR-PCR products from a human hair root.     

Ribonuclease protection assay on microchip electrophoresis

We describe the potential of microchip electrophoresis with a Hitachi SV1210, which can be used to evaluate the integrity of total RNA, for the analysis of mRNA expression. The ribonuclease (RNase) protection assay was performed by using microchip electrophoresis with cyanine 5 (Cy5) labeled 248-base antisense RNA probe (riboprobe) encoding adipose-type fatty acid binding protein (A-FABP) as the riboprobe. The fluorescence intensity corresponding to the protected RNA fragment increased in a dose-dependent manner with respect to the complementary strand RNA. Results were obtained in 120 s, and the same amount of Cy5-labeled antisense riboprobe as used in the conventional method can be used. Furthermore, 8 times more sensitive detection of mRNA by microchip electrophoresis could be obtained. An obvious increase in the mRNA expression of A-FABP, which is known as a differentiation marker of adipocytes, occurred during the adipocyte differentiation of 3T3-L1 cells. These results clearly indicate the potential of microchip electrophoresis for the analysis of mRNA expression in cells.     

UV- and visible-excited fluorescence of nucleic acids separated by capillary electrophoresis

UV- and visible-excited fluorescence detection strategies were compared for nucleic acids separated by capillary electrophoresis (CE). A dual-polymer sieving matrix consisting of hydroxypropylmethylcellulose and poly(vinylpyrrolidone) was used to separate DNA fragments from a 100-base pair ladder and RNA from individual cells. Two nucleic acid dyes, SYBR Gold and SYBR Green I, were evaluated for their performance at both UV (275 nm) and visible (488 nm) excitation wavelengths. While SYBR Gold-bound RNA from single cells yielded a substantially reduced UV-excited signal compared to that with visible excitation (as expected), the sensitivity of SYBR Gold-bound double-stranded DNA was comparable for UV and Vis excitation wavelengths. This study reveals the first demonstration of using SYBR Gold dyes for DNA detection following separation with CE and also the first example of SYBR-based detection of RNA sampled and separated from individual cells.     

The staining efficiency of cyanine dyes for single‐stranded DNA is enormously dependent on nucleotide composition

The staining of nucleic acids with fluorescent dyes is one of the most fundamental technologies in relevant areas of science. For reliable and quantitative analysis, the staining efficiency of the dyes should not be very dependent on the sequences of the specimens. However, this assumption has not necessarily been confirmed by experimental results, especially in the staining of ssDNA (and RNA). In this study, we found that both SYBR Green II and SYBR Gold did not stain either homopyrimidines or ssDNA composed of only adenine (A) and cytosine (C). However, these two dyes emit strong fluorescence when the ssDNA contains both guanine (G) and C (and/or both A and thymine (T)) and form potential Watson‐Crick base pairs. Interestingly, SYBR Gold, but not SYBR Green II, strongly stains ssDNA consisting of G and A (or G and T). Additionally, we found that the secondary structure of ssDNA may play an important role in DNA staining. To obtain reliable results for practical applications, sufficient care must be paid to the composition and sequence of ssDNA.     

Comparison of benzothiazole-based dyes for sensitive DNA detection

For efficient and quantitative DNA detection, fluorescence staining is the most often explored approach, which relies on non-covalent binding of dyes with double stranded DNA (dsDNA). Ethidium bromide (EB) is the most classic DNA stain, but suffers from its high carcinogenicity. A series of less toxic alternatives were developed, many of which contain the core structure of the benzothiazole ring. However, the relationship between the structure and the DNA detection performance was not illustrated. Herein, five benzothiazole dyes, namely thiazole orange, SYBR Green I, PicoGreen, SYBR Safe, and thioflavine-T, were compared for DNA detection through direct fluorescence and gel electrophoresis, with particular focus on the structure-performance relationship. It turned out that SYBR Green I is currently the best choice for DNA detection. The results in this work may be useful for future DNA-staining dye developments.     

Comparison of benzothiazole-based dyes for sensitive DNA detection

For efficient and quantitative DNA detection, fluorescence staining is the most often explored approach, which relies on non-covalent binding of dyes with double stranded DNA (dsDNA). Ethidium bromide (EB) is the most classic DNA stain, but suffers from its high carcinogenicity. A series of less toxic alternatives were developed, many of which contain the core structure of the benzothiazole ring. However, the relationship between the structure and the DNA detection performance was not illustrated. Herein, five benzothiazole dyes, namely thiazole orange, SYBR Green I, PicoGreen, SYBR Safe, and thioflavine-T, were compared for DNA detection through direct fluorescence and gel electrophoresis, with particular focus on the structure-performance relationship. It turned out that SYBR Green I is currently the best choice for DNA detection. The results in this work may be useful for future DNA-staining dye developments.     

Homogeneous time-resolved fluoroimmunoassay of 3,5,3'-triiodo-l-thyronine in human serum by using europium fluorescence energy transfer

A sensitive homogeneous time-resolved fluoroimmunoassay method for 3,5,3'-triiodo-l-thyronine (T3) based on the fluorescence resonance energy transfer (FRET) from a fluorescent Eu(3+) complex, {[(4,6-dichloro-1,3,5-triazin-2-yl)amino-biphenyl-4'-yl]-2,2':6',2'-terpyridine-6,6'-diyl}bis(methylenenitrilo) tetrakis(acetate)-Eu(3+) (DTBTA-Eu(3+)) (lambda(ex,max)=335nm, lambda(em,max)=615nm), to an organic fluorescence dye Cy5 has been developed. The new assay system combined the use of DTBTA-Eu(3+)-labeled T3-bovine serum albumin (BSA) conjugate and Cy5-labeled anti-T3 monoclonal antibody for a competitive-type immunoassay. After the competitive reactions of DTBTA-Eu(3+)-labeled T3-BSA and T3 sample with Cy5-labeled anti-T3 antibody, the T3 concentration was measured with a time-resolved mode by monitoring the sensitized emission of Cy5 derived from FRET in a homogeneous format. The method gives the detection limit of 0.26ng/ml. The coefficient variations of the method are less than 2.0% and the recoveries are in the range of 80-111% for serum sample measurement. The concentrations of T3 in 30 human serum samples were determined, and the results were compared with those of the independently determined by a radio-immunoassay method. A good correlation was obtained with a correlation coefficient of 0.989.     

多重聚合酶链反应-毛细管电泳-激光诱导荧光法检测三种食源性致病菌

建立了食品中常见致病菌大肠杆菌O157:H7的uidA基因、沙门菌的invA基因和志贺菌的ipaH基因的多重聚合酶链反应（PCR）产物的毛细管电泳快速检测方法。根据这3种致病菌的特异性基因序列设计多重PCR引物,优化PCR扩增反应体系,采用7.0 g/L 甲基纤维素为筛分介质,毛细管电泳-激光诱导荧光检测法同时检测了3种常见致病菌的PCR扩增产物。在优化的多重PCR反应和毛细管筛分电泳条件下,该方法可以同时检测沙门菌、志贺菌和大肠杆菌O157:H7基因的多重PCR扩增产物,22 min内即可完成3种常见致病菌的毛细管电泳检测。迁移时间的相对标准偏差为1.47%~2.07%。与凝胶电泳法比较,该法简便快速,灵敏度高,可用于多种致病菌脱氧核糖核酸的检测,为食品安全提供了一种可靠的快速检测方法。     

DNA amplification via polymerase chain reaction inside miniemulsion droplets with subsequent poly(n-butylcyanoacrylate) shell formation and delivery of polymeric capsules into mammalian cells

There is a growing interest in the development of stable nanocapsules that could deliver the bioactive compounds within the living organism, and to release them without causing any toxic effects. Here the miniemulsion droplets were first used as "nanoreactors" for the amplification of single-molecule dsDNA template (476 and 790 base pairs) through PCR. Afterwards, each droplet was surrounded with a biodegradable PBCA shell by interfacial anionic polymerization, enabling therefore to deliver the PCR products into the cells. The size of the initial miniemulsion droplets and the final polymeric capsules was in the range of 250 and 320 nm, mainly depending on the type of the continuous phase and presence of dsDNA template molecules. The formation of PCR products was resolved with gel electrophoresis and detected with fluorescence spectroscopy in the presence of DNA specific dye (SYBRGreen). TEM studies were performed to prove the formation of the polymeric shell. The shell thickness was measured to be within 5-15 nm and the average molecular weight of the formed PBCA polymer was around 75000 g · mol(-1) . For the cell uptake experiments, the obtained nanocapsules were transferred from the organic phase into aqueous medium containing a water-soluble surfactant. The effect of the surfactant type (anionic, cationic or non-ionic) on the HeLa cell viability and nanocapsule uptake behavior was studied by CLSM and FACS. Confocal analysis demonstrated that nanocapsules stabilized with cationic (CTMA-Cl) and non-ionic (Lutensol AT50) surfactants show almost the same uptake, whereas capsules redispersed in anionic (SDS) surfactant possess a 30% higher uptake. The release of the encapsulated material within the cell was studied on the example of Cy5-labeled oligonucleotides showing the colocalization with mitochondria of MSCs cells.     

Separation‐free single‐base extension assay with fluorescence resonance energy transfer for rapid and convenient determination of DNA methylation status at specific cytosine and guanine dinucleotide sites

A separation‐free single‐base extension (SBE) assay utilizing fluorescence resonance energy transfer (FRET) was developed for rapid and convenient interrogation of DNA methylation status at specific cytosine and guanine dinucleotide sites. In this assay, the SBE was performed in a tube using an allele‐specific oligonucleotide primer (i.e., extension primer) labeled with Cy3 as a FRET donor fluorophore at the 5′‐end, a nucleotide terminator (dideoxynucleotide triphosphate) labeled with Cy5 as a FRET acceptor, a PCR amplicon derived from bisulfite‐converted genomic DNA, and a DNA polymerase. A single base‐extended primer (i.e., SBE product) that was 5′‐Cy3‐ and 3′‐Cy5‐tagged was formed by incorporation of the Cy5‐labeled terminator into the 3′‐end of the extension primer, but only if the terminator added was complementary to the target nucleotide. The resulting SBE product brought the Cy3 donor and the Cy5 acceptor into close proximity. Illumination of the Cy3 donor resulted in successful FRET and excitation of the Cy5 acceptor, generating fluorescence emission from the acceptor. The capacity of the developed assay to discriminate as low as 10% methylation from a mixture of methylated and unmethylated DNA was demonstrated at multiple cytosine and guanine dinucleotide sites.     

Multiple genotyping based on multiplex PCR and microarray

The genetic variability has obtained more and more attention in the process of diagnosis and treatment of tumors.Herein,we have described a multiple genotyping method based on magnetic enrichmentmultiplex PCR (MEM-PCR) and microarray technology.Monodisperse magnetic beads were fabricated and modified with streptavidin.Four loci on two genes (M235T and A-6G loci on AGT gene,A1298C and C677T loci on MTHFR gene) were selected to study single nucleotide polymorphisms (SNP).Target sequences of these SNP loci were amplified using Cy3-labeled primers through multiplex PCR in one tube after the templates were enriched and purified by functional magnetic beads (MB).Four pairs of NH₂-labeled probes,corresponding to each locus,were fixed on CHO-modified glass slide by covalent binding.Hybridization between target sequences and probes was performed under suitable conditions.The spotting locations on microarray and the ratio of fluorescence intensity,produced by different loci,were used to distinguish the SNP genotypes.Finally,three of gastric cancer samples were collected and genotyping analysis for these four SNP loci was carried out successfully simultaneously by this method.     

Allele-specific extension on microarray for DNA methylation analysis

Aberrant DNA methylation of CpG site in the gene promoter region has been confirmed to be closely associated with carcinogenesis. In this present study, a new method based on the allele-specific extension on microarray technique for detecting changes of DNA methylation in cancer was developed. The target gene regions were amplified from the bisulfite treated genomic DNA (gDNA) with modified primers and treated with exonuclease to generate single-strand targets. Allele-specific extension of the immobilized primers took place along a stretch of target sequence with the presence of DNA polymerase and Cy5-labeled dGTP. To control the false positive signals, the hybridization condition, DNA polymerase, extension time and primers design were optimized. Two breast tumor-related genes (P16 and E-cadherin) were analyzed with this present method successfully and all the results were compatible with that of traditional methylation-specific PCR. The experiments results demonstrated that this DNA microarray-based method could be applied as a high throughput tool for methylation status analysis of the cancer-related genes, which could be widely used in cancer diagnosis or the detection of recurrence.     

An approach to the sensitivity of temperature-gradient gel electrophoresis in the detection of clonally expanded T-cells in cutaneous T-cell lymphoma

Detection of T-cell clonality by polymerase chain reaction (PCR) and high-resolution electrophoresis facilitates differentiation of early stages of cutaneous T-cell lymphoma (CTCL) from benign T-cell-rich dermatoses. However, data regarding the sensitivity of the various electrophoresis techniques differ remarkably. In the present study, the capacity of heteroduplex (HD)-loaded temperature-gradient gel electrophoresis (TGGE) to detect clonally expanded T-cells was assessed systematically and modifications to the procedure were defined. Using our standard protocol, HD-TGGE detected clonal T-cell receptor (TCR)-gamma PCR products, generated from the Jurkat cell line, down to a total of 2 ng/microL (14 ng) DNA. However, slowly migrating single strands of the clonal PCR product reduced the amount of the clonality indicating homoduplices. To overcome this single-strand formation, thus decreasing the detection limit, the urea concentration in the gel and the temperature ramp for the HD-formation were altered, as well as the temperature gradient in the gel. Application of the modified protocol resulted in a tenfold lower detection limit of 0.15 ng/microL (1.05 ng) DNA in the clonal band. The sensitivity of the adapted HD-TGGE was investigated by dilution experiments using the well established T-cell lines Jurkat, Molt-4, MyLa and SeAx. By these approaches clonal PCR products diluted in nonclonal PCR products were detectable down to concentrations of 5-10%. Comparably, in the case of mixtures of clonal in nonclonal DNA the detection limit reached 5-10% clonal DNA. However, by dilution of clonal cells in nonclonal peripheral blood mononuclear cells, which corresponds to in vivo conditions, a lower detection limit of approximately 1-5% was observed.     

Quantitative proteomics by fluorescent labeling of cysteine residues using a set of two cyanine‐based or three rhodamine‐based dyes

Despite all remarkable progress in gel‐based proteomics in recent years, there is still need to further improve quantification by decreasing the detection limits and increasing the dynamic range. These criteria are achieved best by fluorescent dyes that specifically stain the proteins either by adsorption after gel electrophoresis (in‐gel staining) or covalent coupling prior to gel electrophoresis (in‐solution staining). Here we report a multiplex analysis of protein samples using maleimide‐activated cyanine‐based (Cy3 and Cy5) and rhodamine‐based dyes (Dy505, Dy535, and Dy635) to permanently label all thiol‐groups of cysteine‐containing proteins. The detection limits in SDS‐PAGE were about 10 ng per band and even 2 ng for BSA due to its high content of cysteine residues. Thus only 5 μg protein of a mouse brain homogenate were analyzed by 2‐DE. Both cyanine‐ and rhodamine‐based dyes also stained proteins that did not contain cysteines, probably by reaction with amino groups. This side reactivity did not limit the method and might even extend its general use to proteins missing cysteine residues, but at a lower sensitivity. The dynamic range was more than two orders of magnitude in SDS‐PAGE and the Dy‐fluorophores did not alter the mobility of the tested proteins. Thus, a mixture of Dy505‐, Dy555‐, and Dy635‐labeled Escherichia coli lysates were separated by 2‐DE in a single gel and the three spot patterns relatively quantified.     

A new quantitative method for circulating DNA level in human serum by capillary zone electrophoresis with laser-induced fluorescence detection

We present a method for the quantification of circulating DNA in serum by capillary zone electrophoresis (CZE) with laser-induced fluorescence detection (LIF). The serum was digested by proteinase to release free DNA. SYBR Gold was utilized as DNA intercalating dye, fluorescein as internal standard (ISTD). CZE-LIF was applied for the separation and quantification of total circulating DNA. Good linearity (R = 0.9992) in the low range of DNA concentrations (0.5-40 ng/mL) and a detection limit of 0.5 ng/mL for DNA (S/N = 3) were obtained. Our data demonstrated that CZE-LIF system has a good linearity with excellent sensitivity and satisfactory reproducibility in the quantification of circulating DNA in serum. This method was successfully used for the quantification of circulating DNA levels in serum. We observed that the circulating DNA levels in certain cancer patients were significantly higher than that in healthy individuals. Compared to current methods, our protocol does not need the extraction of DNA from serum. Our preliminary results have illustrated that CZE-LIF system is simple, rapid, and sensitive, and it is well suitable for large-scale quantification of circulating DNA levels in clinical diagnosis.     

High-throughput separation of DNA and proteins by three-dimensional geometry gel electrophoresis: feasibility studies

We report a novel separation method that is applicable to both DNA and protein samples, based on electrophoresis in a three-dimensional (3-D) geometry. In contrast to conventional electrophoresis, samples are applied in a two-dimensional, planar array to one of the surfaces of a 3-D geometry separation medium. Loading onto a plane results in a very high sample capacity. Sample migration and separation occur along the third spatial dimension, which is perpendicular to the loading plane. The key problem of electrophoresis in a 3-D geometry separation setup is that temperature gradients are caused by Joule's heat, affecting the electrical conductivity and viscosity of the separation medium. A means of achieving straight sample migration under these circumstances is to force heat flow through the separation medium parallel to the axis of sample migration. This can be done by dissipating the heat via the electrode sides of the gel and blocking any other heat transfer. The separation of DNA and proteins by this method has been tested using agarose gel electrophoresis, polyacrylamide gel electrophoresis, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Data were acquired off-line by conventional staining methods as well as on-line by detection of laser-induced fluorescence. We describe how to excise samples from the separation medium for preparative purposes. Possible unique applications of this 3-D geometry electrophoresis separation method are also discussed.     

Gel electrophoretic analysis of chitosan hydrolysis products.

Enzymatic hydrolysis of commercial crustacean chitosan by barley chitosanases was analyzed by subjecting chitosan to electrophoresis in a 10% w/v polyacrylamide slab gel in the presence of 7 M urea and 5.5% v/v acetic acid. Chitosan migrated as a polycation. Chitosan was stained with Coomassie Brilliant Blue R-250 or visualized by ultraviolet transillumination after staining with Calcofluor White M2R. Some chitosan molecules were retarded by gel electrophoresis while small chitosan molecules migrated at the bottom of a 10% w/v polyacrylamide gel. Such analysis revealed that 96 h were necessary to convert all chitosan to oligosaccharides under our assay conditions. Chitosan oligosaccharides generated by enzymatic or chemical hydrolysis were further analyzed by electrophoresis in a 33% w/v polyacrylamide gel containing urea and acetic acid. Coomassie Brilliant Blue R-250 was found to be better than Calcofluor White M2R for staining chitosan oligosaccharides. Chitosan oligomers of four residues (tetramers) or more were easily resolved in such a polyacrylamide gel system. To our knowledge, this is the first report of a gel electrophoretic separation of chitosan and its oligosaccharides.