Formation of the same pyrimido[1,2-a]indoles from 1-(oxiran-2-ylmethyl)-1H-indole or [1,3]oxazolo[3,2-a]indole derivatives in its reactions with aromatic amines

Reactions of two isomers—2-chloro-1-(oxiran-2-ylmethyl)-1H-indole-3-carbaldehyde or 2-(chloromethyl)-2,3-dihydro[1,3]oxazolo[3,2-a]indole-9-carbaldehyde with aromatic amines lead to the same products in both cases—hydrochlorides of pyrimido[1,2-a]indole derivatives containing two fragments of an amine per one part of the indole nucleus. Its structure was confirmed by X-ray analysis of the crystals base, obtained by alkali treatment of the reaction product (when aryl is 4-MeOC₆H₄).     

Quinoxaline-2,3-dithiol in reactions with propargyl bromide and 1,3-dibromopropyne

Propargyl bromide with quinoxaline-2,3-dithiol in DMSO in the presence of K₂CO₃ affords 2,3-bis-(2-propynylsulfanyl)quinoxaline in good yield whereas in absolute methanol in the presence of sodium methoxide at 20°C a 1:2 mixture of 2,3-bis(2-propynylsulfanyl)quinoxaline and 3-(2-propynylsulfanyl)-2(1H)-quinoxalinethione is formed. Individual 3-(2-propynylsulfanyl)-2(1H)-quinoxalinethione was obtained by crystallization of this mixture from ether. The reaction of 1,3-dibromopropyne with quinoxaline-2,3-dithiol in ethanol in the presence of NaOH at heating results in 2-bromomethylidene-1,4-(3H)-dithiino[2,3-b]quinoxaline in 77% yield. Performing this reaction in methanol in the presence of sodium methoxide during long heating (16 h) led to 2,3-bis[(3-bromo-2-propynyl)sulfanyl]quinoxaline in 72% yield.     

A theoretical study on the photochemical reactions of 2,3-diazabicyclo[2.1.1]hex-2-ene

The photochemical reactions of 2,3-diazabicyclo [2.1.1]-hex-2-ene (the 1,3-sigmatropic shift of a bridged carbon atom to give a nitrogen-retained product and the N₂ elimination) are investigated by ab initio MO Cl calculation. The present calculation suggests that a stable intermediate exists at the lowest triplet state in the course of the 1,3-sigmatropic shift. The methylene group of this intermediate can rotate almost freely, which results in the stereochemical randomization of the bridge carbon atom of a nitrogen-retained product. On the other hand, one of the CN of a reactant is broken at the ¹B₂ state with a bent in-plane mode. The other CN bond seission proceeds through the intersystem crossing from the ¹A″ state (which comes from the ¹B₂ state of a reactant) to the ³A′ state (which comes from the ³B₁ state of a reactant) because the ³A′ state has CN bonds with σσ* character. Once the N₂ is eliminated, a product (bicyclo[1.1.0]butane of 1.3-butadiene) is formed easily via 1,3-cyclobutanediyl.     

Novel fluoro-substituted benzo- and benzothieno fused pyrano[2,3-c]pyrazol-4(1H)-ones

A straightforward, two-step synthesis of fluoro substituted chromeno[2,3-c]pyrazol- and [1]benzothieno[2′,3′:5,6]pyrano[2,3-c]pyrazol-4(1H)-ones, respectively, is presented. Hence, treatment of 1-substituted or 1,3-disubstituted 2-pyrazolin-5-ones with fluoro substituted 2-fluorobenzoyl chlorides or 3-chloro-6-fluoro-1-benzothiophene-2-carbonyl chloride using calcium hydroxide in refluxing 1,4-dioxane gave the corresponding 4-aroylpyrazol-5-ols, which were cyclized into the fused ring systems. 5-Fluorochromeno[2,3-c]pyrazol-4(1H)-one was obtained upon treatment of the 1-(4-methoxybenzyl) protected congener with trifluoroacetic acid. Treatment of 5-fluorochromeno[2,3-c]pyrazol-4(1H)-ones with methylhydrazine afforded novel tetracyclic ring systems such as 2-methyl-7-phenyl-2,7-dihydropyrazolo[4′,3′:5,6]pyrano[4,3,2-cd]indazole. Detailed NMR spectroscopic investigations (¹H, ¹³C, ¹⁵N, ¹⁹F) with the obtained compounds were undertaken.     

Synthesis of tricyclic isoindoles and thiazolo[3,2-c][1,3]benzoxazines

The thermolysis of (3R,9bS)-5-oxo-2,3,5,9b-tetrahydrothiazolo[2,3-a]isoindole-3-carboxylic acids in Ac₂O led to novel 3-methylene-2,5-dioxo-3H,9bH-oxazolo[2,3-a]isoindoles and chiral (9bS)-5-oxo-2,3,5,9b-tetrahydrothiazolo[2,3-a]isoindoles were obtained on FVP. Starting from l-cysteine methyl ester (3R,10bR)-5-oxo-2,3-dihydro-10bH-[1.3]thiazolo[3,2-c][1,3]benzoxazines were obtained as single stereoisomers. The thermolysis of (3R,10bR)-5-oxo-2,3-dihydro-10bH-[1.3]thiazolo[3,2-c][1,3]benzoxazine-3-carboxylic acid in Ac₂O gave 5-acetyl-2-phenyl-2,3-dihydrothiazole. The structures of methyl (3R,9bS)-5-oxo-2,3,5,9b-tetrahydrothiazolo[2,3-a]isoindole-3-carboxylate 1a and methyl (2R,4R)-N-chlorocarbonyl-2-(2-hydroxyphenyl)thiazolidine-4-carboxylate 9 were determined by X-ray crystallography.     

An efficient ionic liquid mediated synthesis of substituted 5H[1,3]-thiazolo[2,3-b]quinazoline-3,5-(2H)-dione and 5H-thiazolo[2,3-b]quinazolin-5-one

A new, environmentally benign two-step synthesis of 5H[1,3]-thiazolo[2,3-b]quinazoline-3,5-(2H)-dione and 5H-thiazolo[2,3-b]quinazolin-5-one derivatives has been accomplished stepwise. The substituted 2-aminobenzoic acid upon condensation with thiourea in 1-butyl-3-methylimidazolium bromide at moderate temperature under nitrogen atmosphere yielded 2-thioxo-1H-4-quinazolinones. The resulting intermediate 2-thioxo-1H-4-quinazolinones, when reacted with 2-chloroethanoic acid/2-chloropropanal underwent cyclization to yield the desired product in excellent yields.     

Synthesis of 7-iodo(arylsulfanyl)methyl-7,8-dihydro-[1,3]thiazolo[2,3-i]purinium pentaiodide (perchlorates) and their transformation into 4-amino-5-(1,3-thiazol-2-yl)imidazole derivatives

Intramolecular electrophilic cyclization of 6-allylsulfanylpurine by the action of iodine and arenesulfenyl chlorides gave 7-iodomethyl-7,8-dihydro[1,3]thiazolo[2,3-i]purin-6-ium pentaiodide and 7-arylsulfanylmethyl-7,8-dihydro[1,3]thiazolo[2,3-i]purin-6-ium perchlorates, respectively. 7-Iodomethyl-7,8-dihydro-[1,3]thiazolo[2,3-i]purin-6-ium iodide reacted with sodium and potassium alkoxides to produce alkyl N-[5-(4-methyl-1,3-thiazol-2-yl)-1H-imidazol-4-yl]formimidates, and its reaction with secondary cyclic amines afforded 5-(4-methyl-1,3-thiazol-2-yl)-N-[morpholin-4-yl(or piperidin-1-yl)methylidene]-1H-imidazol-4-amines. Successive treatment of 7-arylsulfanylmethyl-7,8-dihydro[1,3]thiazolo[2,3-i]purin-6-ium perchlorates with sodium acetate and morpholine led to the formation of 5-(4-arylsulfanylmethyl-4,5-dihydro-1,3-thiazol-2-yl)-N-(morpholin-4-ylmethylidene)-1H-imidazol-4-amines.     

Thermal decomposition products of methyl 1,5-diphenyl- and 5-methyl-1-phenyl-2,3-diazabicyclo[3.1.0]hex-2-ene-6-exo-carboxylates

Methyl 1,5-diphenyl- and 5-methyl-1-phenyl-2,3-diazabicyclo[3.1.0]hex-2-ene-6-exo-carboxylates at 138°C undergo decomposition via elimination of nitrogen molecule with formation in each case of five products. Two products are methyl 1,3-diphenyl(or 1-methyl-3-phenyl)bicyclo[1.1.0]butane-2-endo- and -exo-carboxylates, and the three others are derivatives of buta-1,3-diene, methyl (Z)-2-benzylidene-3-phenyl(or 3-methyl)but-3-enoate and methyl (E)- and (Z)-3,4-diphenyl(or 4-methyl-3-phenyl)penta-2,4-dienoates. The formation of these products may be rationalized assuming intermediacy of substituted allylcarbene which undergoes both intramolecular cycloaddition and rearrangements involving 1,2-hydride and 1,2-vinyl shifts.     

Unexpected course of rearrangement of substituted S-(1(3H)-isobenzofuranone-3-yl)isothiuronium bromides

Three series of S-(1(3H)-isobenzofuranone-3-yl)isothiuronium bromides differing in substitution at the isothiuronium moiety (none, one or two methyl groups) and at the benzene ring were prepared and characterized. These salts were then treated with various bases (acetate, triethylamine, Na₂CO₃) to give either 1-hydroxy-3-oxo-1,3-dihydro-2H-isoindol-2-carbothioamides or the product of S to N isobenzofuranone-3-yl migration, i.e., 1,3-dimethyl-1-(3-oxo-1,3-dihydro-2-benzofuran-1-yl)thioureas. If ammonia was used in reaction with N,N′-dimethyl isothiuronium salts then 3-hydroxy-2,3-dihydro-1H-isoindol-1-ones were formed together with 1,3-dimethyl-1-(3-oxo-1,3-dihydro-2-benzofuran-1-yl)thioureas in parallel reaction with the yields increasing with ammonia concentration. The formation of isoindolones takes place in two steps with an aldehyde intermediate, which can be trapped with N,N-dimethylhydrazine.     

Molecular rearrangement of 1-substituted 9b-hydroxy-3,3a,5,9b-tetrahydro-1H-imidazo[4,5-c]quinoline-2,4-diones—an unexpected pathway to new indole and imidazolinone derivatives

1-Substituted 3a-alkyl/aryl-9b-hydroxy-3,3a,5,9b-tetrahydro-1H-imidazo[4,5-c]quinoline-2,4-diones and 3′-substituted 3-alkyl/aryl-3-ureido-1H,3H-quinoline-2,4-diones react in boiling acetic acid to give 2-alkyl/aryl-1H-indol-3-yl-ureas and/or 1,3-bis[2-(2-oxo-2,3-dihydro-1H-imidazol-4-yl)-phenyl]-ureas. By the action of hydrochloric acid, the first of them rearrange to give 4-(2-aminophenyl)-1,3-dihydroimidazol-2-ones. The structure of 1,3-bis[2-(2-oxo-2,3-dihydro-1H-imidazol-4-yl)-phenyl]-ureas was confirmed by their synthesis. All compounds were characteried by their ¹H NMR, ¹³C NMR, IR spectra, atmospheric pressure chemical ioniation mass spectra, and some of them also by ¹⁵N NMR spectroscopic data.     

Efficient syntheses of novel indeno[1,2-b]chromenone derivatives via hetero-Diels-Alder reactions of 2-(arylmethylene)-1H-indene-1,3(2H)-diones with enaminones

Efficient syntheses of novel 10-aryl-5a-(arylamino)-9-hydroxy-5a,6,7,8-tetrahydroindeno[1,2-b]chromen-11(10H)-one derivatives has been reported by [4+2] cycloaddition reactions of electron-deficient 2-(arylmethylene)-1H-indene-1,3(2H)-dione heterodienes with electron-rich enaminones in [bmim]BF₄ at 80?°C and in acetic acid at 80?°C. Dimedone/cyclohexane-1,3-dione enaminones have been used as dienophiles in Inverse Electron Demand hetero-Diels-Alder reactions. The products were obtained in high yields by a simple work up.     

Thermal isomerizations of cis,anti,cis-tricyclo[6.4.0.0]dodec-3-ene to trans- and cis,endo-tricyclo[6.2.2.0]dodec-9-ene: diradical conformations and stereochemical outcomes in [1,3] carbon shifts

The gas-phase thermal isomerizations at 315 °C of cis,anti,cis-tricyclo[6.4.0.0^2,7]dodec-3-ene to trans-tricyclo[6.2.2.0^2,7]dodec-9-ene and to cis,endo-tricyclo[6.2.2.0^2,7]dodec-9-ene favor the former, the more geometrically strained product, by a ratio of 2.4:1. These products correspond to suprafacial inversion (si) and suprafacial retention (sr) stereochemical outcomes. The reaction stereochemistry shown by the 11-carbon homolog, cis,anti,cis-tricyclo[6.3.0.0^2,7]undec-3-ene, is strikingly different: the [1,3] carbon shift takes place to give only the ‘forbidden’ sr product. Two related bicyclic vinylcyclobutanes, 8-deuterio- and 8-exo-methylbicyclo[4.2.0]oct-2-enes, evidence contrasting reaction stereochemical predilections in [1,3] shifts, but the 12-carbon tricyclic system and the 8-exo-methyl bicyclic analog isomerize with the same si:sr ratio! These observations prompt fresh considerations of structural influences on conformational preferences available to the alkyl, allyl diradical reactive intermediates involved.     

Iodocyclization of 2-[allyl(methallyl)sulfanyl]-6-(trifluoromethyl)pyrimidin-4(3<Emphasis Type="Italic">H</Emphasis>)-ones

Iodination of 2-[allyl(methallyl)sulfanyl]-6-(trifluoromethyl)pyrimidin-4(3H)-ones was accompanied by cyclization to 2,3-dihydro[1,3]thiazolo[3,2-a]pyrimidin-4-ium triiodides. 3-(Iodomethyl)-3-methyl- 7-oxo-5-(trifluoromethyl)-2,3-dihydro[1,3]thiazolo[3,2-a]pyrimidin-4-ium triiodide was reduced with sodium iodide to 3,3-dimethyl-7-oxo-5-(trifluoromethyl)-2,3-dihydro[1,3]thiazolo[3,2-a]pyrimidin-4-ium iodide.     

Formation of carbon-carbon bonds between activated alkynes and diimine ligands in the aluminum complexes

The gallium and aluminum complexes containing the redox-active ligand (dpp-bian)Ga-Ga(dpp-bian) (1), (dpp-bian)Al-Al(dpp-bian) (2), or (dpp-bian)AlI(Et₂O) (3) (dpp-bian is 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene) react with alkyl butynoates Me-C≡C-CO₂R (R = Me, Et) to form C-C bonds between the dpp-bian ligand and alkyne. The reaction of complex 1 with methyl 2-butynoate and 4-chloroaniline in a molar ratio of 1: 2: 2 affords 7-(2,6-diisopropylphenyl)-10-methylacenaphtho[1,2-b]pyridin-8(7H)-one (4) containing no gallium. In the reaction of complex 2 with methyl 2-butynoate, alkyne is inserted into the skeleton of the dpp-bian ligand to form 4-(dpp-AIE)-9-(2,6-diisopropylphenyl)-8-(1,3-dpp-2MBIDP)-3,7-dimethoxy-1,5-dialuma-9-aza-2,6-dioxabicyclo[3.3.1]nonadiene-3,7 (5) (dpp-AIE is 1-[2-(2,6-diisopropylphenylimino)acenaphthen-1(2H)-ylidene]ethyl; 1,3-dpp-2MBIDP is 1,3-bis(2,6-diisopropylphenylimino)-2-methyl-2,3-dihydro-1H-phenalen-2-yl). The reactions of complex 3 with methyl and ethyl 2-butynoates afford dimeric derivatives [-OC(OR)=C(2,3-dpp-1MBIDP)Al(I)-]₂ (2,3-dpp-1MBIDP is 2,3-bis(2,6-diisopropylphenylimino)-1-methyl-2,3-dihydro-1H-phenalen-2-yl; R = Me (6), Et (7)). The reaction of complex 3 with methyl 2-butynoate gives the product isomeric to compound 6: [-OC(OCH₃)=C(1,3-dpp-2MBIDP)Al(I)-]₂ (8), which cleaves THF resulting in complex [-OC(OCH₃)=C(1,3-dpp-2MBIDP)Al(OC₄H₈I)-]₂ (9). Complex (dpp-bian)Al(acac) (10), obtained by the reduction of dpp-bian with aluminum in the presence of Al(acac)₃ in diethyl ether at ambient temperature, is inert towards acetylene, phenylacetylene, and alkyl butynoates. Compounds 4–7 and 10 were characterized using IR spectroscopy, and compounds 4, 7, and 10 were additionally characterized by ¹H NMR spectroscopy. The structures of compounds 4–7, 9, and 10 were determined by X-ray diffraction analysis.     

Stereoselective ring-opening reactions with AcBr and AcCl. A new method for preparation of some haloconduritols

The actions of AcX (X=Br, Cl) on 7-oxa-bicyclo[2.2.1]hept-5-ene-2,3-diol diacetates and a transoid-epoxide prepared from the acetonide of cyclohexa-3,5-diene-cis-1,2-diol were studied. H₂SO₄-catalyzed cleavage of exo-cis-7-oxa-bicyclo[2.2.1]hept-5-ene-2,3-diol diacetate with AcCl gave (1α,2α,3α,6β)-6-chloro-4-cyclohexene-1,2,3-triol triacetate, from which the corresponding chloroconduritol was obtained by trans-esterification (MeOH/HCl). A similar reaction of the exo-diacetate with AcBr in the presence of H₂SO₄ resulted in bromine addition. The formation of bromine from the reaction of AcBr and H₂SO₄ was observed by independent experiments. H₂SO₄-catalyzed reaction of endo-cis-7-oxa-bicyclo[2.2.1]hept-5-ene-2,3-diol diacetate with AcX (X=Br, Cl) gave (1α,2α,3β,6β)-6-halo-4-cyclohexene-1,2,3-triol triacetates. The reaction of the transoid-epoxide with AcX (X=Br, Cl) with no catalyst gave also (1α,2α,3β,6β)-6-halo-4-cyclohexene-1,2,3-triol triacetates.     

Acetylene-driven multi-molecular assemblies of high complexity: imidazo[1,2-a]pyridines and 5-chloro-N-[2-(imidazo[1,2-a]pyridin-6-yl)vinyl]pyridin-2-amine

Acetylene reacts with 2-aminopyridines in the superbase system KOBu^t/DMSO (the initial acetylene pressure ∼8 atm, 80 °C, 5 min) to give 2,3-dimethylimidazo[1,2-α]-pyridines in up to 60% yields. In the case of 2-amino-5-chloropyridine, along with ‘normal’ product, (Z)-5-chloro- N-[2-(2,3-dimethylimidazo[1,2-α]pyridin-6-yl)vinyl]pyridin-2-amine is formed in 40% yield. These multi-molecular assemblies involve parallel nucleophilic addition of N-centered anions to the triple bond and ethynylation of the forming C=N bond.     

Cyclodimerization of 1-(Dimethoxyniethyl)-5,6-dimethylidene-7-oxa-bicyclo[2.2.1]hept-2-ene Induced by Nonacarbonyldiiron. Crystal Structure of (1RS, 2SR, 3RS, 4RS, 4aRS, 9aSR)- Tricarbonyl[C, 2,3, C-η-(1,4-epoxy-1,5-bis(dimethoxymethyl)-2,3-dimethylidene-1,2,3,4,4a,9,9a,10-octahydroanthracene)]iron

The transition-metal-carbonyl-induced cyclodimerization of 5,6-dimethylidene-7-oxabicyclo[2.2.1]hept-2-ene is strongly affected by substitution at C(1) While 5,6-dimethylidene-7-oxabicyclo[2.2.1]hept–2-ene-l-methanol ( 7 ) refused to undergo [4 + 2]-cyclodimerization in the presence of [Fe₂(CO)⁹] in MeOH, 1-(dimethoxymethyl)-5,6-di-methylidene-7-oxabicyclo[2.2.1]hept-2-ene ( 8 ) led to the formation of a 1.7:1 mixture of ‘trans’ ( 19, 21, 22 ) vs. ‘cis’ ( 20, 23, 24 ) products of cyclodimerization together with tricarbonyl[C, 5,6, C-η-(l-(dimethoxymethyl)-5,6-di-methylidenecyclohexa-1,3-diene)]iron ( 25 ) and tricarbonyl[C,3,4, C-η-(methyl 5-(dimethoxymethyl)-3,4-di-methylidenecyclohexa-1,5-diene-l-carboxylate)]iron ( 26 ). The structures of products 19 and of its exo ( 21 ) and endo ( 22 ) [Fe(CO)₃(1,3-diene)]complexes) and 20 (and of its exo ( 23 ) and endo (24) (Fe(CO)₃(1,3-diene)complexes) were confirmed by X-ray diffraction studies of crystalline (1RS, 2SR, 3RS, 4RS, 4aRS, 9aSR)-tricarbonyl[C, 2,3, C-η-(1,4-epoxy-1,5-bis(dimethoxymethyl])-2,3-dimethylidene-1,2,3,4,4a,9,9a,10-octahydroanthracene)iron ( 21 ). In the latter, the Fe(CO)₃(1,3-diene) moiety deviates significantly from the usual local C_s symmetry. Complex 21 corresponds to a ‘frozen equilibrium’ of rotamers with η-alkyl, η³-allyl bonding mode due to the acetal unit at the bridgehead centre C(1).     

Cycloaddition of Alkenes and Alkynes to the P-centered Singlet Biradical [P(μ-NTer)]2

The reaction of biradical [P(μ-NTer)]₂ ( 1 , Ter = 2,6-bis(2,4,6-trimethylphenyl)phenyl) towards different alkenes (R = 2,3-dimethyl–butadiene, 2,5-dimethyl-2,4-hexadiene, 1,7-octadiene, 1,4-cyclohexadiene) and alkynes (R = 1,4-diphenyl-1,3-butadiyne) was studied experimentally. Although these olefins can react in different ways, only [2+2] cycloaddition products ( 1R ) were observed. The reaction with 2,3-dimethylbutadiene also led to the [2+2] product ( 1dmb ). Thermal treatment of 1dmb above 140 °C resulted in the recovery of biradical 1 upon homolytic bond cleavage of the two P–C bonds and the release of 2,3-dimethylbutadiene. In contrast to this reaction, all other [2+2] additions products ( 1R , R = 1,7-octadiene, 1,4-cyclohexadiene, 1,4-diphenyl-1,3-butadiyne) began to decompose at temperatures between 200 °C and 300 °C. Only unidentified products were obtained but no temperature-controlled equilibrium reactions were observed. Computations were carried out to shed light into the formal [2+2] as well as the possible [4+2] addition reaction.     

Substituted chromones in [3+2] cycloadditions with nonstabilized azomethine ylides: synthesis of 1-benzopyrano[2,3-c]pyrrolidines and 1-benzopyrano[2,3-c:3,4-c′]dipyrrolidines

Chromones bearing electron-withdrawing substituents at the 2- or 3-position react with nonstabilized azomethine ylides to produce 1-benzopyrano[2,3-c]pyrrolidines in good yields. Reactions of 3-cyanochromones proceed diastereoselectively to give 1-benzopyrano[2,3-c]pyrrolidines and tetrahydro-1H-spiro[chromeno[2,3-c]pyrrol-9,5′-oxazolidine]-9a-carbonitriles, depending on the reactant ratio, as a result of a 1,3-dipolar cycloaddition of the azomethine ylide at the double bond and carbonyl group of the chromone system. The latter undergoes demethylenation and recyclization into a novel hexahydrochromeno[2,3-c:3,4-c′]dipyrrole tetracyclic system on heating with hydrochloric acid.     

Indenols, indenones and (arylcyclohexadienyl)Mn(CO)3 π-complexes from the thermally promoted reactions of alkynes with ortho-Mn(CO)4 aryl ketone, amide, ester and aldehyde derivatives

Thermally promoted reactions of a range of alkynes with the orthomanganated acetophenone (η²-2-acetylphenyl)Mn(CO)₄ generally give 1H-inden-1-ols in good yield; effects of substituents and solvent on these reactions are reported, along with the crystal structure of 1-methyl-2,3-diphenyl-1H-inden-1-ol. The corresponding orthomanganated benzophenone similarly gives the indenol with diphenylacetylene but by exception, orthomanganated 3-acetylthiophene with phenylacetylene reacts via triple alkyne insertion and cyclisation, shown by crystal structure determination of the π-complex product [(1,2,3,4,5-η)-2-(3-acetylthien-2-yl)-1,3,5-triphenylcyclohexadienyl]tricarbonylmanganese. Corresponding orthomanganated derivatives of N,N-dimethylbenzamide, methyl 3,4,5-trimethoxybenzoate and 4-dimethylaminobenzaldehyde all give indenones with diphenylacetylene, but with (excess) acetylene only the aldehyde gives an indenone, the amide and ester giving instead [(1,2,3,4,5-η)-6-arylcyclohexadienyl]Mn(CO)₃ complexes. ¹H NMR analysis of these complexes shows H at C6 to be on the same face of the cyclohexadienyl ring as Mn(CO)₃ (endo-6-H; exo 6-aryl) as expected from three successive syn additions of alkyne at metallated carbon followed by intramolecular syn addition of alkene in the final cyclisation stage.