Titania-lanthanum phosphate photoactive and hydrophobic new generation catalyst

Titania-lanthanum phosphate nanocomposites with multifunctional properties have been synthesized by aqueous sol-gel method. The precursor sols with varying TiO₂:LaPO₄ ratios were applied as thin coating on glass substrates in order to be transparent, hydrophobic, photocatalytically active coatings. The phase compositions of the composite powders were identified by powder X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM). The anatase phase of TiO₂ in TiO₂-LaPO₄ composite precursors was found to be stable even on annealing at 800 °C. The glass substrates, coated with TL1 (TiO₂-LaPO₄ composition with 1 mol% LaPO₄) and TL50 (composite precursor containing TiO₂ and LaPO₄ with molar ratio 1:1) sols and annealed at 400 °C, produced contact angles of 74° and 92°, respectively, though it is only 62° for pure TiO₂ coating. The glass substrates, coated with TL50 sol, produced surfaces with relatively high roughness and uneven morphology. The TL1 material, annealed at 800 °C, has shown the highest UV photoactivity with an apparent rate constant, k_app=24×10⁻³ min⁻¹, which is over five times higher than that observed with standard Hombikat UV 100 (k_app=4×10⁻³ min⁻¹). The photoactivity combined with a moderate contact angle (85.3°) shows that this material has a promise as an efficient self-cleaning precursor.     

Synthesis of a new photoactive nanovehicle: a nanoworm

A nanovehicle with a new photoactive moiety has been synthesized. The incorporation of the azobenzene chassis allows for potential wormlike movement accompanying the rolling behavior of the wheels. Two versions, the fullerene-wheeled and carborane-wheeled nanoworms, were synthesized to examine the solution-based photoisomerization yields of the chassis.     

p-Carborane: a new cage spacer for photoactive metal polypyridine dyads

The first example of a binuclear ruthenium complex involving the p-carborane framework in the bridging ligand is reported. The bridging ligand is a symmetric linear array comprising a central p-carborane unit, two p-phenylene spacers, and two 5-yl-2,2'-bipyridine coordinating units. A homobinuclear Ru(II) complex, with 2,2'-bipyridine as peripheral ligands, was synthesized and characterized. The Ru(II)-Ru(III) mixed-valence species, obtained by partial oxidation, has been investigated with steady-state and time-resolved techniques in CH3CN. The rate of photoinduced electron transfer is 2.3 x 10(8) s(-1).     

Carbanion addition to a metalated acetaldehyde. A new regiospecific alkene synthesis

The reaction of 2-[(dicarbonyl)(η⁵-cyclopentadienyl)iron]acetaldehyde with organolithium and Grignard reagents results in efficient addition to the aldehyde carbonyl. The intermediate alkoxides have been treated with tetrafluoroboric acid to give high yields of isolated η²-alkene complexes of the dicarbonyl(η⁵-cyclopentadienyl)iron cation. Using this procedure the following alkenes were produced as complexed ligands to iron in 50–90% yield: propene, 1-hexene, 3-methyl-1-pentene, 3,3-dimethyl-1-butene, 1,3-butadiene, and styrene.     

High-performance bioreactors: a new generation

Compact loop bioreactors with a total volume of 4 l were equipped with electrically controllable valves and pumps, most of the currently available on-line sensors, direct digital control systems and a process minicomputer; complete automatic operation was thus achieved. These reactors perform excellently: the mixing time is <1 s, oxygen transfer is not a limiting factor and the precision of control of more than 10 process variables is much better than so far reported on other systems. Such high-performance bioreactors were used in investigating the stable synchronous oscillations of Saccharomyces-type yeasts and the reduction of slightly soluble organic compounds with biocatalysts. The inherent advantages of on-line measurement (and control) are discussed.     

Circulating miRNAs: a new generation of anti-doping biomarkers

MicroRNAs (miRNAs) are small non-coding RNAs that regulate a variety of biological processes. Cell-free miRNAs detected in blood plasma are used as specific and sensitive markers of physiological processes and some diseases. Circulating miRNAs are highly stable in body fluids, for example plasma. Therefore, profiles of circulating miRNAs have been investigated for potential use as novel, non-invasive anti-doping biomarkers. This review describes the biological mechanisms underlying the variation of circulating miRNAs, revealing that they have great potential as a new class of biomarker for detection of doping substances. The latest developments in extraction and profiling technology, and the technical design of experiments useful for anti-doping, are also discussed. Longitudinal measurements of circulating miRNAs in the context of the athlete biological passport are proposed as an efficient strategy for the use of these new markers. The review also emphasizes potential challenges for the translation of circulating miRNAs from research into practical anti-doping applications.     

Toward a new generation of therapeutics

Scientific evidence in the prevention and treatment of various disorders is accumulating regarding probiotics. The health benefits supported by adequate clinical data include increased resistance to infectious disease, decreased duration of diarrhea, management of inflammatory bowel disease, reduction of serum cholesterol, prevention of allergy, modulation of cytokine gene expression, and suppression of carcinogen production. Recent ventures in metabolic engineering and heterologous protein expression have enhanced the enzymatic and immunomodulatory effects of probiotics and, with time, may allow more active intervention among critical care patients. In addition, a number of approaches are currently being explored, including the physical and chemical protection of cells, to increase probiotic viability and its health benefits. Traditional immobilization of probiotics in gel matrices, most notably calcium alginate and κ-carrageenan, has frequently been employed, with noted improvements in viability during freezing and storage. Conflicting reports exist, however, on the protection offered by immobilization from harsh physiologic environments. An alternative approach, microencapsulation in “artificial cells,” builds on immobilization technologies by combining enhanced mechanical stability of the capsule membrane with improved mass transport, increased cell loading, and greater control of parameters. This review summarizes the current clinical status of probiotics, examines the promises and challenges of current immobilization technologies, and presents the concept of artificial cells for effective delivery of therapeutic bacterial cells.     

Quantum mechanical/molecular mechanical studies on spectral tuning mechanisms of visual pigments and other photoactive proteins

The protein environments surrounding the retinal tune electronic absorption maximum from 350 to 630 nm. Hybrid quantum mechanical/molecular mechanical (QM/MM) methods can be used in calculating excitation energies of retinal in its native protein environments and in studying the molecular basis of spectral tuning. We hereby review recent QM/MM results on the phototransduction of bovine rhodopsin, bacteriorhodopsin, sensory rhodopsin II, nonretinal photoactive yellow protein and their mutants.     

HOUDINI: a new approach to computer-based structure generation

A new method of structure generation called convergent structure generation has been developed to address limitations of earlier methods. The features of the program (HOUDINI) based on this method include the following: a single integrated representation of the collective substructural information; the use of parallel atom groups for efficient processing of families of alternative substructural inferences; and a managed structure generation procedure designed to build required structural features early in the process.     

Discotic liquid crystals: a new generation of organic semiconductors

Discotic (disc-like) molecules typically comprising a rigid aromatic core and flexible peripheral chains have been attracting growing interest because of their fundamental importance as model systems for the study of charge and energy transport and due to the possibilities of their application in organic electronic devices. This critical review covers various aspects of recent research on discotic liquid crystals, in particular, molecular design concepts, supramolecular structure, processing into ordered thin films and fabrication of electronic devices. The chemical structure of the conjugated core of discotic molecules governs, to a large extent, their intramolecular electronic properties. Variation of the peripheral flexible chains and of the aromatic core is decisive for the tuning of self-assembly in solution and in bulk. Supramolecular organization of discotic molecules can be effectively controlled by the choice of the processing methods. In particular, approaches to obtain suitable macroscopic orientations of columnar superstructures on surfaces, that is, planar uniaxial or homeotropic alignment, are discussed together with appropriate processing techniques. Finally, an overview of charge transport in discotic materials and their application in optoelectronic devices is given.     

A new catalytic conjugate addition/aldol strategy that avoids preformed metalated nucleophiles

A new conjugate addition/aldol strategy has been developed. Unlike conventional procedures that require metalation of the nucleophilic species, the procedure allows the direct coupling of aryl iodides, aldehydes, and acrylates in a nickel-catalyzed, organozinc-promoted process.     

Photophysical, photochemical and photobiological properties of pyrrolocoumarins; a new class of photoactive compounds

With the aim of finding new photoactive compounds that may reduce the side effects of 8-methoxypsoralen photochemotherapy we report on some photophysical, photochemical and photobiological properties of recently synthesized pyrrolocoumarins, in particular 4-methyl-N-ethyl-pyrrolo[3,2-g]coumarin (PCNEt) which has an absorption maximum in the UV-A (320-400 nm). Laser (347 nm) flash photolysis studies showed triplet transients that were quenched by O2 and by ground state PCNEt. Singlet minus triplet spectra were broad (350-550 nm) and, at 700 nm, indicated solvated electron and radical production. PCNEt complexes with DNA in the dark and photobinds to thymine but does not form DNA cross-links. PCNEt was phototoxic in yeast with an action spectrum similar to its absorption spectrum. PCNEt showed photohaemolytic activity but was not phototoxic on guinea pig skin. These data suggest that PCNEt may photosensitize via several mechanisms: direct DNA photobinding, photodynamic action, or photoproduction of radicals.     

Selective anion encapsulation by a metalated cryptophane with a pi-acidic interior

Metalation of the exterior arene faces of the molecular capsule (+/-)-cryptophane-E with [Cp*Ru]+ moieties results in a pi-acidic cavity capable of encapsulating anions. The [CF3SO3]- and [SbF6]- salts have been crystallographically characterized and demonstrate the encapsulation of these anions by the metalated cryptophane. 1H and 19F NMR spectroscopy establish the binding of anions in NO2CD3 solution and reveal the relative affinity of the cavity for different anions (KX-/KOTf-): [BF4]- approximately 0, [PF6]- = 1.18, [CF3SO3]- identical with 1, [SbF6]- = 0.30. Variable temperature rate studies reveal the activation barrier for triflate encapsulation to be DeltaG298K = 18.0(8) kcal.mol-1 (DeltaH = 17.5(4) kcal.mol-1 and DeltaS = 2(1) cal.mol-1.K-1).     

Reaction of metalated nitriles with enones

[reaction: see text] There have been a number of reports of the kinetic conjugate (1,4) addition of metalated arylacetonitriles to enones. Several proposals have been made to explain this behavior based on nucleophile structure or aggregation state or on the HSAB properties of the reactants. A reexamination of these studies showed that in each case the 1,4 adducts resulted from equilibration of the kinetically formed 1,2 adducts to the more stable 1,4 adducts. Thus, no conclusions about the origins of 1,4 selectivity can be drawn from these experiments. The 1,2 addition, retro-1,2 addition, 1,4 addition, and retro-1,4 addition of lithiophenylacetonitrile to benzylideneacetone were examined, and a free energy level diagram was constructed for the reaction.     

Identification of six new photoactive yellow proteins--diversity and structure-function relationships in a bacterial blue light photoreceptor

Photoactive yellow proteins (PYP) are bacterial photoreceptors with a Per-Arnt-Sim (PAS) domain fold. We report the identification of six new PYPs, thus nearly doubling the size of this protein family. This extends the taxonomic diversity of PYP-containing bacteria from photosynthetic to nonphotosynthetic bacteria, from aquatic to soil-dwelling organisms, and from Proteobacteria to Salinibacter ruber from the phylum Bacteriodetes. The new PYPs greatly increase the sequence diversity of the PYP family, reducing the most prevalent pair-wise identity from 45% to 25%. Sequence alignments and analysis indicate that all 14 PYPs share a common structure with 13 highly conserved residues that form the chromophore binding pocket. Nevertheless, the functional properties of the PYPs vary greatly--the absorbance maximum extends from 432 to 465 nm, the pK(a) of the chromophore varies from pH 2.8 to 10.2, and the lifetime of the presumed PYP signaling state ranges from 1 ms to 1 h. Thus, the PYP family offers an excellent opportunity to investigate how functional properties are tuned over a wide range, while maintaining the same overall protein structural fold. We discuss the implications of these results for structure-function relationships in the PYP family.     

Catalytic antibodies as a new generation of biocatalysts

The present state and perspectives of the creation of a new generation of biocatalysts, catalytic antibodies (CA), and their application to organic synthesis are discussed. The problems to be solved for the development of the practical application of CA are especially noted. This paper was prepared in response to a request from the Editorial board in order to attract the attention of investigators to the creation of artificial enzymes, called catalytic antibodies, which is a new and important direction in science. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1568–1574, September, 1997     

Amorphous fluoropolymers - a new generation of products

Poly(tetrafluoroethylene) (PTFE) already known since 50 years, Is a unique material among plastics due to its chemical inertness, heat resistance, electrical insulation properties and low coefficient of friction. Its high melt viscosity needs special ways of processing. That fact led to the development of melt-processible fluoropolymers such as Perfluoroethylene-propylene (FEP) and Perfluoroalkoxy (PFA). Now we have a third generation which is an amorphous fluorpolymer made by copolymerizing tetrafluoroethylene with 2,2-bis (trifluoromethyl) - 4,5 - difluoro -1,3 - dioxole. The bulky cyclic structure prevents the normal crystallisation as with PTFE polymers. The amorphous fluoropolymers have high clarity and dissolve in selected solvents. Having C-F, C-C and C-O bonds the well known properties as high temperature and chemical resistance are retained. Dielectric constant is in the range 1.83 - 1.93 up to 10.00 MHz the lowest of any plastic material. Optical properties are also very special. Refractive index is very low, in the range 1.29 - 1.32. Transmission is high from UV to IR and the polymer is not photo-degraded. The unique electrical and optical properties, coupled with high chemical and thermal stability, plus the ability to work from solution offers a powerful tool for those working on the frontiers of technology.     

Triggering DNAzymes with light: a photoactive C8 thioether-linked adenosine

Herein we report evidence for a light-inducible DNAzyme. In so doing, we also disclose the synthesis and photochemical properties of a novel nucleoside: 8-(2-(4-imidazolyl)ethyl-1-thio)-2'-deoxyriboadenosine (d1). The light sensitivity of (d1) was evaluated via an examination of the photoinduced reactivation of DNAzyme 8-17E from an inactive form that contained a single nucleotide (d1) modification. Restoration of DNAzyme activity results from a photoinduced reversion of (d1) to unmodified deoxyadenosine. Deuterium studies indicate that water is the source of hydrogen in the C8-H product and not the alkylthio group, suggesting that reversion of (1) to adenosine is not a consequence of simple homolysis of the C8-S bond but of an unprecedented photochemical conversion. This adenosine, which affords significant control of catalytic reactivation of a DNAzyme, may find general use in photodecaging other biological systems.     

Efficient synthesis and characterization of new photoactive dextran esters showing nanosphere formation

Different types of photoactive dextran derivatives with high degree of substitution were prepared by an efficient and mild esterification of the biopolymer with 2-methoxycinnamic acid, [(4-methyl-2-oxo-2H-chromen-7-yl)oxy]acetic acid, and azobenzene-4-carboxylic acid via in situ activation of the carboxylic acid groups with N,N'-carbonyldiimidazole. The structures of the novel dextran esters were evaluated by means of NMR spectroscopy applying the perpropionylated samples. Perpropionylation yields samples soluble in chloroform and acetonitrile that are very useful solvents not only for NMR but also for UV-vis spectroscopic studies. The photochemistry was studied by NMR and UV-vis spectroscopy in the dissolved state and the changes observed may be used to control the properties. The photoactive dextran esters form spherical nanoparticles of a size below 200 nm that are of interest in the design of smart materials.