Absorption Spectroscopy of (8,1) Band in d3△-a3ПSystem of CS Radical

The CS radical was generated by discharging the mixture gas of CS₂ and Helium. The Doppler limited spectra of CS were recorded in the region of 12350～12950 cm^-1 using optical heterodyne concentration modulation absorption spectroscopy. Three hundred and twenty-six lines were recorded and assigned to the d³△-a³П(8,1) band, in which eighty-three transitions were first observed. A set of improved molecular constants for the d³△(v=8) and a³П(8,1)(v=1) levels were determined by a non-linear least-squares fitting of all the lines to the effective Hamiltonian.     

Effect of non-aqueous solvents on stoichiometry and selectivity of complexes formed between 4′-nitrobenzo-15-crown-5 with Fe3+, Y3+, Cd2+, Sn4+, Ce3+ and Au3+ metal cations

The complexation processes between Fe³⁺, Y³⁺, Cd²⁺, Sn⁴⁺, Ce³⁺ and Au³⁺ metal cations with macrocyclic ligand, 4′-nitrobenzo-15-crown-5 (4′NB15C5), were studied in acetonitrile (AN), methanol (MeOH) and nitromethane (NM) solvents at different temperatures using conductometric method. The conductance data show that the stoichiometry of the complexes formed between this macrocyclic ligand and Cd²⁺, Au³⁺ cations is 1: 1 (ML), but in the case of Fe³⁺, Y³⁺ and Ce³⁺ metal cations, 2: 1 (M₂: L) and 2: 2 [M₂: L₂] complexes are formed in nitromethane solutions. The results show, that the selectivity of 4’NB15C5 for the studied metal cations in methanol solutions at 15°C is: Sn⁴⁺ > Cd²⁺ > Y³⁺ > Fe³⁺ ∼ Ce³⁺ > Au³⁺, but in the case of acetonitrile, the stability order was found to be: Y³⁺ > Au³⁺ > Fe³⁺ > Cd²⁺. The values of stability constants of the 1: 1 [M: L] complexes were determined from conductometric data using a GENPLOT computer program. The values of thermodynamic parameter (ΔH _c ^o and ΔH _c ^o) for formation of the complexes were obtained from temperature dependence of the stability constants, using the van’t Hoff plots. The results show that the values of standard enthalpy (ΔH _c ^o) and standard entropy (ΔH _c ^o) change with the nature of the non aqueous solvents.     

近紫外激发Sm3+与Sr2+,Ba2+,Bi3+共掺杂的La1/3NbO3的发光性质

通过高温固相反应合成了La1/3NbO3∶Sm3+荧光粉.样品的荧光光谱表明,La1/3NbO3∶Sm3+荧光粉最强的激发带在406 nm,对应于Sm3+的6H5/2→4K11/2跃迁,属于近紫外区(365～410 nm).当激发波长为406nm时,样品的最强发射峰位于596 nm,是由Sm3+的4G5/2→6H7/2跃迁而产生的.因此,La1/3NbO3∶Sm3+可以作为基于近紫外激发的白光发光二极管(LED)的红光材料.而且,La位共掺杂Sr2+,Ba2+和Bi3+使样品的荧光强度大大增加,在最佳掺杂浓度时的量子产率分别为5.4%,7.5%和5.3%.     

Die halbquantitative Bestimmung von Cl?, Br?, J?, SCN?, AsO43?, Cr2O72? und [Fe(CN)6]3?

Ohne Zusammenfassung     

KMgF3∶Ce3+,Tb3+纳米粒子中Ce3+→Tb3+的发光及能量传递

利用微乳液方法,合成了铈、铽共掺杂的氟镁钾纳米粒子,研究了体系中Ce³⁺→Tb³⁺的发光特性以及它们之间的相互作用,结果表明KMgF₃∶Ce³⁺,Tb³⁺纳米粒子中存在Ce³⁺→Tb³⁺的能量传递过程,即Ce³⁺可以将吸收的能量直接传递给Tb³⁺离子,使得Tb³⁺的绿色发光强度大为增加。     

Hypervalence and the delocalizing versus localizing propensities of H 3– , Li 3– , CH 5– and SiH 5–

Lithium and silicon have the capability to form hypervalent structures, such as Li₃^– and SiH₅^–, which is contrasted by the absence of this capability in hydrogen and carbon, as exemplified by H₃^– and CH₅^– which, although isoelectronic to the former two species, have a distortive, bond-localizing propensity. This well-known fact is nicely confirmed in our DFT study at BP86/TZ2P. We furthermore show that the hypervalence of Li and Si neither originates from the availability of low-energy 2p and 3d AOs, respectively, nor from differences in the bonding pattern of the valence molecular orbitals; there is, in all cases, a 3-center-4-electron bond in the axial X–A–X unit. Instead, we find that the discriminating factor is the smaller effective size of C compared to the larger Si atom, and the resulting lack of space around the former. Interestingly, a similar steric mechanism is responsible for the difference in bonding capabilities between H and the effectively larger Li atom. This is so, despite the fact that the substituents in the corresponding symmetric and linear dicoordinate H₃^– and Li₃^– are on opposite sides of the central atom. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.

Titration of AsO43? ions with 0.1 M magnesium sulphate solution in the presence of Ca2+, Mg2+, Fe3+, Cu2+ ions and some other foreign substances

Summary For the convenient and sufficiently accurate determination of AsO₄ ^3– ions in technical products containing different filling, suspending and colouring materials, as well as impurities—e.g. for the assay of arsenate containing plant protecting materials—the following procedure is recommended.About 5 g of the sample is dissolved, resp. extracted with 4 N hydrochloric acid, and aliquots of the clear filtrate are titrated after elimination of the interfering metal ions by combining them with complexing agents (potassium cyanide and disodium ethylenediamin tetraacetic acid) in a properly buffered medium. The titration with 0.1 M MgSO₄ solution is conducted in the presence of eriochrome black T solution as indicator, first time for eliminating the excess of EDTA added, and afterwards to determine the AsO₄ ^3– ions, after adding about 40% of ethanol.The procedure may be useful chiefly for serial routine analyses.The authors are indebted to engineer L. Fokássy, department leader at the State Institute for Agricultural Quality Control, as well as to engineeress P. Fodor and Mr. Gy. Josepovits, scientific collaborators of the Research Institute for Plant Protection, for kindly supplying some of the samples for the experiments.     

Polyatomic anion versus acetonitrile in coordinating ability: structural properties of AgX-bearing 1,4-bis(2-isonicotinoyloxyethyl)piperazine (X??=?NO3?, CF3SO3?, ClO4?, BF4?, and PF6?)

Type studies on competitive polyatomic anion versus acetonitrile coordination in the self-assembly of a series of [Ag₂(X) _m (bip)(NCCH₃) _n ](X)_2−m (X⁻ = NO₃ ⁻, CF₃SO₃ ⁻, ClO₄ ⁻, BF₄ ⁻, and PF₆ ⁻; m = 0, 2; n = 0, 2, 4; bip = 1,4-bis(2-isonicotinoyloxyethyl)piperazine) were carried out. Each bip spacer acts as an N₄ tetradentate ligand and is linked to four silver(I) centers through two pyridine and two piperazine moieties, producing a double strand consisting of two 20-membered ring units. The coordinating environment around the silver(I) center is subtly determined by the competition of the polyatomic anions with acetonitrile, that is, by the Ag···NCCH₃ versus Ag···X interactions. The coordinating ability of acetonitrile is inversely proportional to the order of the coordination ability of the Hoffmeister series of polyatomic anions, NO₃ ⁻ ≫ CF₃SO₃ ⁻ > ClO₄ ⁻ > BF₄ ⁻ ≫ PF₆ ⁻.     

Zum schnellen Nachweis der Kationen Cu++, Ni++, Co++, Fe++ und Mn++, der AnionenSCN?,OCN?,CN?,S2O82?,J?und Br? sowie tert.aliphatischer Amine und Pyridine

Ohne Zusammenfassung     

Gd2O3:Yb3+,Nd3+,Tm3+/SiO2/Ag纳米复合材料的合成及上转换发光性质

通过多步骤的化学法合成了Gd₂O₃：Yb³⁺,Nd³⁺,Tm³⁺/SiO₂/Ag纳米复合材料。利用XRD,TEM,EDS,XPS,CLSM等方法对样品进行表征。实验结果表明,具有低声子能、稳定的化学性质的Gd₂O₃作为上转换发光的基质,当掺杂的敏化剂Nd³⁺离子浓度为1.0%（n/n）,激活剂离子Tm³⁺浓度为0.5%（n/n）时,上转换发光强度达到最大值。此外,表面吸附的Ag纳米颗粒,由于表面等离激元共振耦合作用,使得上转换发光蓝光波段的强度增强1.70倍。     

Li2SrSiO4:Ce3+,Tb3+荧光粉的发光特性及Ce3+→Tb3+的能量传递

用固相反应法合成了具有单相的Li2EuSiO4结构的Li2Sr1-x-ySiO4:xCe3+,yTb3+系列样品。荧光光谱研究表明,Li2SrSiO4:Ce3+发射很强的蓝光,最强的激发峰位于360 nm;而Li2SrSiO4:Tb3+发射很强的绿光,最强的激发激发峰位于243 nm,但在350～410 nm的激发非常微弱。在Ce3+,Tb3+共掺杂的样品Li2Sr0.99-ySiO4:0.01Ce3+,yTb3+中,观察到Ce3+对Tb3+的共振能量传递。由于Ce3+对Tb3+能量传递,Tb3+的激发光谱中出现360 nm附近的宽激发峰。控制Tb3+/Ce3+掺杂浓度比可以实现绿蓝双基色的调制。这种双基色的荧光粉有望在紫外激发的白光LED中获得应用。     

Ce3+,Tb3+,Eu3+共掺杂Sr2MgSi2O7体系的白色发光和能量传递机理

通过正交试验,采用高温固相法制备了Sr2-x-y-zMgSi2O7∶xCe3+,yTb3+,zEu3+系列样品.使用X射线衍射仪和荧光光谱仪表征了样品的物相和发光性质,并讨论了Ce3+-Tb3+-Eu3+共掺杂Sr2MgSi2O7体系中的能量传递过程.实验结果表明,在327 nm波长激发下,所合成荧光粉的发射峰主要位于387 nm(蓝紫)、542nm(绿)和611 nm(红)处;分别以387,542和611 nm为监控波长,所得激发光谱显示荧光粉在327 nm处有最好的激发.在327 nm光激发下,系列样品发光进入白光区.最优化的荧光粉为Sr1.91MgSi2O7∶0.01Ce3+,0.05Tb3+,0.03Eu3+,其色坐标为(0.337,0.313),是一种潜在的发光二极管(LED)用白色荧光粉.     

298.16 K Na＋, K＋, Mg2＋//Cl－, NO3－-H2O五元体系的相平衡研究

采用等温溶解平衡法研究了五元体系Na^＋, K^＋, Mg^2＋//Cl^－, NO₃^－-H₂O在298.16 K、氯化钠饱和时各盐的溶解度和饱和溶液的物化性质(密度, 电导率)以及四元体系Na^＋, Mg^2＋//Cl^－, NO₃^－-H₂O的相平衡关系. 研究表明: 在298.16 K, 氯化钠饱和时该五元体系溶解度相图由六个结晶区、九条单变量溶解度曲线和四个零变量点构成, 六个结晶区分别对应于NaNO₃＋NaCl, KNO₃＋NaCl, KCl＋NaCl, Mg(NO₃)₂•6H₂O＋NaCl, MgCl₂•6H₂O＋NaCl和复盐KCl•MgCl₂•6H₂O＋NaCl; 在298.16 K时, 该四元体系的相图由四个结晶区、五条单变量溶解度曲线和二个零变量点构成, 四个结晶区分别对应于NaNO₃, NaCl, Mg(NO₃)₂•6H₂O, MgCl₂•6H₂O.     

La3+,Ce3+溶液中樟子松吸收的差异性研究

选用樟子松(Pinus sylvestris var. mongolica Litv.)为研究对象,分析其在水培条件下吸收稀土可溶态镧、铈离子(六水硝酸镧、六水硝酸铈,七水氯化镧、七水氯化铈,八水硫酸镧和八水硫酸铈)的过程,揭示樟子松修复镧、铈离子污染的机制。本研究应用吸收动力学的方法探究了樟子松在不同时间内吸收镧、铈离子的含量和速率;并通过回归分析法探究了樟子松-水培体系中吸收镧和铈离子的实测值与预测值之间的相关性。水培溶液中的镧和铈离子浓度分别设置为100, 300, 500, 1000 mg·L^-1。试验结果表明,樟子松体内的镧、铈离子含量随着水培溶液浓度升高而增加,其中,La₂(SO₄)₃, La(NO₃)₃, LaCl₃的含量范围分别为0.0014～0.0142 g, 0.0009～0.0115 g, 0.0017～0.0195 g; Ce2(SO₄)₃,Ce(NO₃     

CaWO4:xEu3+,ySm3+,zLi+红色荧光粉的制备及光学性能

采用微波固相法制备了CaWO₄：xEu³⁺,ySm³⁺,zLi⁺红色荧光粉。测量样品的XRD图、激发谱、发射谱及发光衰减曲线,研究并分析了Eu³⁺、Sm³⁺、Li⁺的掺杂浓度,对样品微结构、光致发光特性、能量传递及能级寿命的影响。结果表明,Eu³⁺、Sm³⁺、Li⁺掺杂并未引起合成粉体改变晶相,仍为CaWO₄单一四方晶系结构。Eu³⁺、Sm³⁺共掺样品中,Sm³⁺掺杂为3%时,Sm³⁺对Eu³⁺的能量传递最有效。Li⁺掺杂起到了助熔剂和敏化剂的作用,使样品发光更强。在394 nm激发下,与CaWO₄：3%Eu³⁺样品比较,3%Eu³⁺、3%Sm³⁺共掺CaWO₄及3%Eu³⁺、3%Sm³⁺、1%Li⁺共掺CaWO₄样品的发光分别增强2倍及2.4倍。同一激发波长下,单掺Eu³⁺样品寿命最短,Sm³⁺、Eu³⁺共掺样品随Sm³⁺浓度增加,寿命先减小后增加,且掺杂了Li⁺的样品比不掺Li⁺的样品⁵D₀能级寿命有所增加。     

绿色荧光粉Ca3Y2Si3O12:Tb3+,Ce3+的制备及发光特性

采用高温固相法合成了绿色荧光粉Ca₃Y₂Si₃O₁₂:Tb³⁺.XRD检测结果显示,荧光粉主晶相为Ca₃Y₂Si₃O₁₂,属单斜晶系.荧光光谱分析表明：Ca₃Y₂Si₃O₁₂:Tb³⁺硅酸盐荧光粉可以被370 nm的近紫外光激发,发射绿光,主发射峰位于490 nm(⁵D₄→⁷F₆),544 nm(⁵D₄→⁷F₅),585 nm(⁵D₄→⁷F₄)和621 nm(⁵D₄→⁷F₃).用544 nm最强峰监测,得到主激发峰位于370 nm的激发光谱,此光谱覆盖了300~450 nm的波长范围.研究了煅烧条件、掺杂浓度及Ce³⁺共掺杂对荧光粉发光性能的影响：在1 400 ℃下经二次煅烧 6 h得到的样品的发光性能最佳,Tb³⁺离子的最佳掺杂浓度为20mol%,Ce³⁺离子共掺杂能够提高荧光粉的发光强度,其最佳掺杂量为4mol%,说明存在Ce³⁺→Tb³⁺的能量传递.     

Effect of crystallization water and nature of an aluminum alkyl on the reduction of Eu3+ to Eu2+ in interaction of EuCl3 · 6H2O with Bu 3i Al and Et3Al

Volumetric and photoluminescence analytical techniques were employed to study the effect of crystallization water and nature of an aluminum alkyl on the reduction of Eu³⁺ to Eu²⁺ in a heterophase interaction of EuCl₃ · 6H₂O in toluene with Bu₃ⁱ Al and Et₃Al.     

Magnetic properties of fullerene salts containing d- and f-metal cations (Co2+, Ni2+, Fe2+, Mn2+, Eu2+, Cd2+). Specific features of the interaction between C60·? and the metal cations

The interaction between the radical anions C₆₀ ^·− and divalent d- and f-metal (Co, Fe, Ni, Mn, Eu, Cd) cations in DMF and acetonitrile-benzonitrile (AN-BN) mixture was studied. Black solid polycrystalline salts (C₆₀ ^·−)₂{(M²⁺)(DMF) _x } (x = 2.4–4, 1–6) containing the radical anions C₆₀ ^·− and metal(ii) cations solvated by DMF were prepared for the first time and their optical and magnetic properties were studied. The salts containing Co²⁺, Fe²⁺, and Ni²⁺ are characterized by antiferromagnetic interactions between the radical anions C₆₀ ^·−, which result in unusually large broadening of the EPR signal of C₆₀ ^·− upon lowering the temperature (from 5.55–12.6 mT at room temperature to 35–40 mT at 6 K for Co²⁺ and Ni²⁺). The salts containing Mn²⁺ and Eu²⁺ form diamagnetic dimers (C₆₀ ⁻)₂, which causes a jumpwise decrease in the magnetic moment of the complexes and disappearance of the EPR signal of C₆₀ ^·− in the temperature range 210–130 K. A feature of salt 6 is magnetic isolation of the radical anions C₆₀ ^·− due to the presence of diamagnetic cation Cd²⁺. The salts prepared are unstable in air and decompose in o-dichlorobenzene or AN. Reactions of C₆₀ ^·− with metal(ii) cations in AN-BN mixture result in decomposition products of the salts that contain neutral fullerene dimers and metals solvated by BN. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1909–1919, September, 2008.     

A theoretical study of cation--π interactions: Li+, Na+, K+, Be2+, Mg2+ and Ca2+ complexation with mono- and bicyclic ring-fused benzene derivatives

DFT (B3LYP functional) and MP2 methods using 6-311+G(2d,2p) basis set have been employed to examine the effect of ring fusion to benzene on the cation--π interactions involving alkali metal ions (Li⁺, Na⁺, and K⁺) and alkaline earth metal ions (Be²⁺, Mg²⁺ and Ca²⁺). Our present study indicates that modification of benzene (π-electron source) by fusion of monocyclic or bicyclic (or mixture of these two kinds of rings) strengthens the binding affinity of both alkali and alkaline earth metal cations. The strength of interaction decreases in the following order: Be²⁺ > Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺ > K⁺ for any considered aromatic ligand. The interaction energies for the complexes formed by divalent cations are 4–6 times larger than those for the complexes involving monovalent cations. The structural changes in the ring wherein metal ion binds are examined. The distance between ring centroid and the metal ion is calculated for all of the complexes. Strained bicyclo[2.1.1]hexene ring fusion has substantially larger effect on the strength of cation--π interactions than the monocyclic ring fusion for all of the cations due to the π-electron localization at the central benzene ring.