Determination of homologues of quaternary ammonium surfactants by capillary electrophoresis using indirect UV detection

This investigation describes the simultaneous separation of two major non-chromophoric quaternary ammonium surfactants, alkyltrimethyl- and dialkyldimethylammonium compounds (ATMACs and DADMACs, respectively), by capillary electrophoresis (CE) using indirect UV detection. The most effective separation conditions was 10 mM phosphate buffer with 57.5% tetrahydrofuran and 3 mM sodium dodecyl sulfate (SDS) at pH 4.3, and the sample hydrodynamic injection of up to 20 s at 1 psi (approximately 60 nl), and an applied voltage of 25 kV (1 psi = 6.9 kPa). Specially, the selection of an appropriate chromophore and an internal standard (I.S.) to improve the peak identification and quantitation was systematically investigated. Decylbenzyldimethyl ammonium chloride (C10-BDMA+C-) as a chromophore with 3 mM sodium dodecyl sulfate provided the best detectability for all homologues. The reproducibility of the migration time and quantitative analysis can be improved by using tetraoctyl ammonium ion as an internal standard, giving the relative standard deviation (R.S.D.) less than 0.8% for the relative migration times, and 2.5-5.5% for the relative peak areas. A good linearity of CE analysis was obtained in the range of 1.0-20 microg/ml with r2 values of above 0.999. The analysis of cationic surfactants in commercial products of hair conditioners and fabric softeners was also performed. Electrospray mass spectrometric method was applied to evaluate the CE method, and the compatible results were obtained.     

Separation and determination of quaternary ammonium compounds by high-performance liquid chromatography with a hydrophilic polymer column and conductometric detection

An HPLC method has been developed for separation and determination of long alkyl chain quaternary ammonium compounds. A column packed with a hydrophilic polymer packing, Shodex Asahipak GF-310 HQ, and a water–acetonitrile mixture containing 4,4′-bipyridyl and hydrochloric acid were used to depress hydrophobic adsorption of the quaternary ammonium compounds and increase the sensitivity of the conductometric detection with a micromembrane suppressor. Dodecyltrimethylammonium, cetyltrimethylammonium, tetradecyldimethylbenzylammonium and stearyltrimethylammonium ions can be completely separated from one another and quantified at 0.1 nmol level.     

离子对分离和抑制电导检测法测定四乙基铵和四丁基铵根离子

建立了季铵盐的离子色谱分析方法.采用Dionex DX-500 型离子色谱仪,C18柱,电导检测器,以30%乙腈和10 mmol/L甲烷磺酸混合溶液为流动相,流量为1.00 mL/min.四乙基溴化铵和四丁基溴化铵的质量浓度和峰面积的相关系数分别为0.9996和0.9994;线性范围分别为10～80 mg/L和20～120 mg/L;检出限分别为0.28和0.76 mg/L;RSD分别为1.3%、 2.5%.该方法可用于分析水溶液中季铵盐的含量.     

Simultaneous determination of low concentrations of ammonium and potassium ions by capillary type isotachophoresis

Low concentrations of ammonium and potassium ions (<2.0 mg/l.) were determined simultaneously by capillary type isotachophoresis based on the interaction between potassium and 18-crown-6 in the aqueous leading electrolyte. The PU value of potassium ion increased with increasing concentration of 18-crown-6 up to 3mM, whereas that of the ammonium ion remained almost constant. Thus complete separation of ammonium and potassium ions could be obtained by using 1-3mM 18-crown-6. The error in the analysis of mixtures containing ammonium and potassium ions (250-mul sample injection) was less than +/- 20% with a leading electrolyte containing 3mM 18-crown-6. The analysis time was 18 min.     

Direct determination of bromide ions in seawater by capillary zone electrophoresis using polyethyleneimine-coated capillaries

A rapid and simple capillary electrophoretic method was developed for the direct determination of bromide ion in seawater. We have found an effective method, based on the use of polyethyleneimine-coated capillaries and the addition of sodium chloride to the background electrolyte. The use of coated capillaries with a cationic polymer changes the direction of the electroosmotic flow in the capillary, which favors the migration speed of the bromide ion and enables the use of low salt concentrations in the separation electrolyte. Bromide ion in seawater can be determined within 2 min using this system and 20 mmol L^-1 NaCl-containing separation electrolyte. The detection limit for the bromide ion was 0.45 g ml^-1. The method was applied to the determination of bromide ion in seawater samples collected from the Bosphorus and the Black Sea. Bromide contents in samples from 0 to 72 m depths varied between 33.2 and 72.8 mg L^-1 with a mean 3.0% RSD.     

Determination of quaternary alkylammonium compounds by capillary zone electrophoresis and indirect UV detection as a real alternative to ion chromatography with suppressed conductivity detection

A capillary electrophoretic (CE) method for the determination of residual mid-chain alkyltrimethylammonium compounds in the pharmaceutical product Welchol™ (an alkylated, crosslinked polyallylamine) was developed, validated and compared with the existing ion chromatographic (IC) method with suppressed conductivity detection. Excellent reproducibilities of migration times (RSD<0.5% within a series of 55 sample injections) and relative peak areas (RSD<2%) make the method suitable for quality control as a real alternative to IC. Limits of quantification of 0.01% w/w of each impurity in the active substance were achieved. Buffer systems for indirect UV detection based on creatinine as visualization reagent with different inorganic and organic acids (phosphoric, sulfuric, formic, acetic, oxalic and citric acid) and their effect on selectivity to ten quaternary ammonium compounds were studied. Selectivity changes were observed for the di- and trivalent analytes depending on the buffer applied. Also, the influence of acetonitrile, methanol, 1,4-dioxane and tetrahydrofuran on selectivity was investigated. In addition, CE–MS experiments were carried out in order to identify several impurities in the product.     

Modified gelatin with quaternary ammonium salts containing epoxide groups

An EPDDMAC-GE polymer （hydrophilic molecule） has been synthesized based on epoxypropyl dodecyl dimethyl ammonium chloride （EPDDMAC） and gelatin. A DEEPSAC-GE polymer （hydrophobic molecule） has been synthesized based on diethyl-2,3-epoxypropyl-[3-methyldimethoxyl] silpropyl ammonium chloride （DEEPSAC） and gelatin. Compared with initial gelatin, the gelatin modified with quaternary ammonium salts containing epoxide groups exhibits stronger antibacterial activity.     

Simultaneous determination of iodide and iodate in seawater by transient isotachophoresis-capillary zone electrophoresis with artificial seawater as the background electrolyte

We developed capillary zone electrophoresis with transient isotachophoresis (ITP) as an on-line concentration procedure for simultaneous determination of iodide and iodate in seawater. The effective mobility of iodide was decreased by addition of 20 mM cetyltrimethylammonium chloride to an artificial seawater background electrolyte so that transient ITP functioned for both iodide and iodate. Limits of detection for iodide and iodate were 4.0 and 5.0 microg/l (as iodine) at a signal-to-noise ratio of 3. Values of the relative standard deviation of peak area, peak height, and migration times for iodide and iodate were 2.9, 1.3, 1.0 and 2.3, 2.1, 1.0%, respectively. The proposed method was applied to simultaneous determination of iodide and iodate in seawater collected at a pond at our university.     

溴化苄基取代吡啶类季铵盐的制备和抗菌性能

抗菌材料和抗菌制品的研究与应用一直是世界各国研究的重要课题~([1-3]),其中有机抗菌剂占据主要地位.季铵盐是研究比较多的一类有机抗菌剂,它们表现出良好的物理性质,如胶束浓度低,黏弹性好和溶解性强~([4]),同时此类抗菌剂具有强效的抗菌作用~([5]),引起了人们的极大兴趣.季铵盐广泛应用于医药、卫生、食品、饲料工业、农业、纺织、塑料、橡胶、造纸、水处理、油田开采、涂料、日常生活等多种领域~([6-10]).     

Effects of ion association of lipophilic quaternary ammonium salts in ion-exchange and potentiometric selectivity

It has been found experimentally and substantiated theoretically that the anion-exchange selectivity in water—lipophilic quaternary ammonium salts (QAS) toluene solutions systems as well as the potentiometric selectivity of plasticized PVC membranes containing QAS, are strongly influenced by ion association. In particular, it has been demonstrated that varying the steric accessibility of QAS exchange center is a powerful tool for the selectivity control. The experimental values of the selectivity change caused by variations in the QAS exchange center steric accessibility were about 3 orders of magnitude when the single-charged ions were exchanged for the single-charged ones and more than seven orders when double-charged ions were exchanged for the single-charged. The above effects have also been observed for the potentiometric selectivity of QAS-based PVC membranes and, to some extent, for the potentiometric selectivity of the neutral anion carrier-based membranes doped by QAS to provide anion permselectivity. This fact is of immediate practical interest for the development of ISE with improved selectivity. The obtained results allow to revise the generally accepted idea of QAS as “nonselective” ion-exchangers and to suggest specific ways for controlling the ion-exchange and potentiometric selectivity using the ion association as a tool.     

The antibacterial finish of cotton via sols containing quaternary ammonium salts

The sols containing quaternary ammonium salts were prepared via sol-gel process. The effects of the molar rate of HCl, H₂O and EtOH to TEOS on the sol viscosity were investigated in detail. Cetyltrimethylammonium bromide (CTAB), Octadecyl dimethyl benzyl ammonium chloride (DC) and Ethylene-Bis (Octadecyl trimethyl ammonium chloride) [E-Bis(OTAC)]were added in the sols and applied to cotton samples by treated. The antibacterial activities of the samples were assessed against both Escherichia coli and Staphylococcus aureus bacteria. The samples treated by E-Bis(OTAC) sol exhibited the satisfactory antibacterial activity that resulted from the more microorganism adsorption and hydrophobicity. The antibacterial activities were still excellent after 10 times washings comparison with the control samples.     

Mixed ternary ion associate formation between xanthene dye, cinchona-alkaloid and quaternary ammonium ion and its application to the determination of trace amounts of quaternary ammonium salts in pharmaceuticals

Xanthene dyes such as eosin and tetraiodofluorescein form 1:2 ion associates with quaternary ammonium ions at pH 7-9; however, the development of color in the organic solvent is poor. When a quaternary ammonium salt is added in the extractable 1:2 associate formed between a xanthene dye and a cinchona-alkaloid in the neutral media, a mixed ternary ion associate (xanthene dye:cinchona-alkaloid:quaternary ammonium ion=1:1:1) is formed. Its extractability is enhanced due to the more bulky associate formation. The ion association caused by addition of cinchona-alkaloids is unique. Of the cinchona-alkaloids, quinidine and cinchonidine with tetraiodofluorescein show excellent effects on sensitivity and extractability. Eosin and tetraiodofluorescein are useful as ion association reagents in the ion associate formation. The apparent molar absorptivities are about 1×10⁵ l mol⁻¹ cm⁻¹ and the calibration range for quaternary ammonium salt is from 2.5×10⁻⁷ to 1.5×10⁻⁶ M. The proposed method is applicable to the selective and sensitive determination of cetylpyridinium chloride, berberine chloride and benzethonium chloride in pharmaceuticals.     

Novel synthesis of aminoacetonitriles via the selective demethylation of quaternary ammonium salts

N-Methyl cyclic amines readily formed quaternary ammonium salts upon treatment with iodoacetonitrile in high yields (70–96%). The latter were selectively demethylated by heating in dimethylformamide to give aminoacetonitriles in moderate to good overall yields (36–69%).     

The use of indium(III) as a complexing counter-ion to enable the separation of chloride,bromide, and iodide using isotachophoresis

A new method has been devised to enable the determination of halide anions by isotachophoresis. This method uses an electrolyte system that employs indium(III) as a counter-ion to manipulate the effective mobilities of sample species by means of complexation reactions. This new procedure successfully enabled the simultaneous determination of the halide ions chloride, bromide, and iodide when a 12 mmol L^–1 nitrate-based leading electrolyte containing 3.5 mmol L^–1 indium(III) at pH 3.0 was used.     

Rapid optimized separation of bromide in serum samples with capillary zone electrophoresis by using glycerol as additive to the background electrolyte

After decades of neglect, bromide has recently been re-introduced in therapy as an effective anti-epileptic drug. The present paper describes the methodological optimization and validation of a method based on capillary zone electrophoresis for the rapid determination of bromide in serum using a high-viscosity buffer and a short capillary (10 cm). The optimized running buffer was composed of 90 mM sodium tetraborate, 10 mM sodium chloride, pH 9.24 and 25% glycerol. The separation was carried out at 25 kV at a temperature of 20 °C. Detection was by direct UV absorption at 200 nm wavelength. The limit of detection (signal-to-noise ratio = 5) in serum was 0.017 mM. The precision of the method was verified in blank serum samples spiked with bromide, obtaining intra-day and day-to-day tests, relative standard deviation values ≤0.2% in terms of migration times and values <2% in terms of peaks areas, respectively.     

Preparation and antibacterial activity of hybrid materials containing quaternary ammonium salts via sol-gel process

Organic-inorganic hybrid coatings containing quaternary ammonium salts (QAS) bonded to the organic-inorganic network were prepared from tetraethoxysilane and triethoxysilane terminated poly(ethylene glycol)-block-poly(ethylene) using a sol-gel process. They were applied as a thin layer (0.6-1 μm) to PE films and the antibacterial activity of the coated films was tested against both Gram-negative (Escherichia coli ATCC 25922) and Gram-positive (Staphylococcus aureus ATCC 6538) bacteria. Measurements at different contact times showed a rapid decrease of the viable count for both the tested strains. In particular, after 48 h of contact, a decrease of 96.4% and 99.1% of E. coli and S. aureus, respectively, was observed. The permanence of the antibacterial activity of the coated films was demonstrated through repeated washings and prolonged immersion in physiological saline solutions at 37 °C. Indeed, due to the removal of QAS moieties by the nucleophilic attack of water, the antibacterial activity after 24 h was strongly reduced when measured on samples submitted to several washings. However, a quite good antibacterial activity was observed even on the same samples after 96 h, probably due to a spontaneous partial restoring of the QAS on the surface. Very good transparency, quite good adhesion and high wettability are further features of these hybrid coatings.     

Separation of alkylbenzyl quaternary ammonium compounds by capillary zone electrophoresis with sample stacking injection

Summary A systematic investigation of operational buffer systems, sample preparation and instrument parameters for achieving the best possible performance for determinating an homologous series of N-benzyl-N-alkyl-N,N-dimethylammonium chloride compounds by capillary zone electrophoresis with direct UV detection. The most effective separation was achieved within 3.5 min with the addition of acetonitrile (40%) in a phosphate buffer (20 mM pH 5.2) using a 40 cm fused-silica capillary operating at 25 KV and 20°C. Degassing of all electrolyte solutions and samples was very important. The linearity and repeatability for each compounds were satisfactory. To improve detection limits, on-column sample preconcentration, sample stacking, was investigated achieving a tenfold enrichment factor and quantitation limits about 10⁻⁷M.     

Imparting durable antimicrobial properties to cotton fabrics using quaternary ammonium salts through 4-aminobenzenesulfonic acid-chloro-triazine adduct

A 4-aminobenzenesulfonic acid-chloro-triazine adduct was successfully synthesized in a laboratory scale and treated with cotton fabrics in order to increase the anionic sites and thereby % exhaustion of cationic compounds. Two Quaternary Ammonium Salts (QAS) was investigated namely, Cetylpyridinum chloride (CPC) and Benzyldimethylhexadecyl ammonium chloride (BDHAC) which are widely accepted as strong antimicrobial agents. The reaction mechanism involved in the synthesis of the reactive adduct as well its application to cotton fabric were demonstrated in detail. The effects of application parameters, namely pH, temperature and liquor ratio were examined. The reaction efficiency was determined through monitored % exhaustion of the adduct by cotton fabric. Antimicrobial activity of the treated cotton sample was studied against Staphylococcus aureus according to AATCC test method 100-1999. Results obtained show that the treated fabric shows higher antimicrobial activity compared with the untreated fabric. The results depict also that % exhaustion decreases as the pH, temperature and liquor ratio increase. Moreover, the appropriate predictable empirical models were developed using Excel solver function incorporating interaction effects of all variables to predict the % exhaustion and the satisfactory results (R² > 0.98) were obtained.     

Synthesis of fulleropyrrolidines through the reaction of [60]fullerene with quaternary ammonium salts and amino acids

The reactions of [60]fullerene with amino acids and quaternary ammonium salts in toluene afforded two fulleropyrrolidine derivatives. One fulleropyrrolidine derivative contained a RCH moiety originating from quaternary ammonium salts through C–N bond cleavages and other fulleropyrrolidine derivatives contained a PhCH moiety originating from toluene through C–H bond cleavage. By using chlorobenzene instead of toluene as solvent, only one fulleropyrrolidine derivative containing a RCH moiety was obtained in the reactions.