Photo-catalytic H2 evolution over a series of Keggin-structure heteropoly blue sensitized Pt/TiO2 under visible light irradiation

We report the visible light-induced hydrogen generation over a series of Keggin-structure heteropoly blue (HPB) anions (PW₁₂O₄₀³⁻, phosphotungstic blue (PTB), GeW₁₂O₄₀⁴⁻ (GTB), SiW₁₂O₄₀⁴⁻ (STB), BW₁₂O₄₀⁵⁻ (BTB)) sensitized Pt/TiO₂ photo-catalysts. The sensitization of TiO₂ by HPB was certified using photo-electrochemical measurements and UV-vis absorption spectra. PTB showed the most pronounced sensitization effect for TiO₂ in those HPB anions and Pt/TiO₂-PTB showed the highest hydrogen generation activity. The sensitization of TiO₂ was significantly dependent on the reduction potential of HPA, which was determined by the kind of central atom in HPA.     

Preparation and photocatalytic activity of CeO2/TiO2 interface composite film

The CeO₂/TiO₂ and TiO₂/CeO₂ interface composite films were prepared on glass substrates by the sol-gel process via dip-coating and calcining technique. The scanning electron microscopy (SEM) revealed that the TiO₂ layer has a compact and uniformity glasslike surface with 200 nm in thickness, and the CeO₂ layer has a coarse surface with 240 nm in thickness. The X-ray diffractometer (XRD) analysis showed that the TiO₂ layer is made up of anatase phase, and the CeO₂ layer is structured by cubic fluorite phase. Through a series of photo-degradation experiments, the relationship of the photocatalytic activity with the constituents of the films was studied. In virtue of the efficient interfacial charge separation via the process of electron transfer from TiO₂ to CeO₂, the photocatalytic activity of the CeO₂/TiO₂ composite film is high. Contrarily, the photocatalytic activity of the TiO₂/CeO₂ composite film is low, due to its inert surface made up of CeO₂ with broad bandwidth. Apart from the effect of the film structure, the effect of film thickness on photocatalytic activity was also discussed.     

Effect of surface fluorination on the photocatalytic and photo-induced hydrophilic properties of porous TiO2 films

Porous surface-fluorinated TiO₂ (F-TiO₂) films were prepared through PEG modified sol-gel method and surface fluorination. The as-prepared films were characterized with XRD, FTIR, AFM, XPS and UV-vis DRS. The effects of surface fluorination on the photocatalytic activity and hydrophilicity of porous TiO₂ film were studied by photocatalytic degradation of rhodamine B (RhB) as well as water contact angle (CA) on porous TiO₂ film. The results showed that the surface fluorination increased the adsorption of RhB on the porous TiO₂ film and enhanced the photocatalytic degradation of RhB. The concentration and pH of NaF solutions affected much the photocatalytic activity of porous TiO₂ film. Porous F-TiO₂ film prepared in 40 mM NaF solution at pH 4.0 showed the highest photocatalytic activity. Because of its porous structure, the porous F-TiO₂ film had original water CA of 22.7°, which is much smaller than that of normal F-TiO₂ film. Under UV light irradiation, the water CA of porous F-TiO₂ film decreased to 5.1° in 90 min.     

Low-temperature transport properties of individual SnO2 nanowires

Stannic oxide (SnO₂) nanowires have been prepared by Chemical vapor deposition (CVD). The low-temperature transport properties of a single SnO₂ nanowire have been studied. It is found that the transport of the electrons in the nanowires is dominated by the Efros-Shklovskii variable-range hopping (ES-VRH) process due to the enhanced Coulomb interaction in this semiconducting nanowire. The temperature dependence of the resistance follows the relation lnR∼T^−1/2. On the I-V and dI/dV curves of the nanowire a Coulomb gap-like structure at low temperatures appears.     

Growth of high-density Ru- and RuO2-composite nanodots on atomic-layer-deposited Al2O3 film

Growth of Ru- and RuO₂-composite (ROC) nanodots on atomic-layer-deposited Al₂O₃ film has been studied for the first time using ion-beam sputtering followed by post-deposition annealing (PDA). X-ray photoelectron spectroscopy analyses reveal that RuO₂ and Ru co-exist before annealing, and around 10% RuO₂ is reduced to metallic Ru after PDA at 900 °C for 15 s. Scanning electron microscopy measurements show that well-defined spherical ROC nanodots are not formed till the PDA temperature is raised to 900 °C. The mean diameter of the nanodots enlarges with increasing PDA temperature whereas the nanodot density decreases, which is attributed to coalescence process between adjacent nanodots. It is further illustrated that the resulting nanodot size and density are weakly dependent on the annealing time, but are markedly influenced by the decomposition of RuO₂. In this article, the ROC nanodots with a high density of 1.6 × 10¹¹ cm⁻², a mean diameter of 20 nm with a standard deviation of 3.0 nm have been achieved for the PDA at 900 °C for 15 s, which is promising for flash memory application.     

Surface characterization of the Zn-Ni-Al2O3 nanocomposite coating fabricated under ultrasound condition

Zn-Ni-Al₂O₃ nanocomposite coating, which was fabricated by eletrodeposition technique with the aid of ultrasound, was investigated by scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis and X-ray photoelectron spectroscopy (XPS). The results reveal that 7.2 wt.% nano-alumina particles uniformly dispersed in the matrix of the composite coating. The XPS analyses demonstrate that the outermost layer of Zn-Ni-Al₂O₃ coating was composed of nano-alumina and Zn(OH)₂, while the transition layer between the outermost layer and the Zn-Ni matrix consisted of nano-alumina, metallic Zn, ZnO and metallic Ni. In order to investigate the influences of ultrasonic agitation and the incorporation of nano-alumina on the composition and surface structure of Zn-Ni matrix, the comparison studies of Zn-Ni-Al₂O₃ nanocomposite coating with Zn-Ni coatings fabricated with and without ultrasound were conducted. The results indicate that ultrasonic agitation resulted in a decrease of Ni content in the Zn-Ni matrix and an increase of the thickness of surface oxide layer; while the incorporation of nano-α-Al₂O₃ increased the Ni content in the Zn-Ni matrix.     

Photoluminescence from amorphous silica nanowires synthesized using TiN/Ni/SiO2/Si and TiN/Ni/Si substrates

Photoluminescence characteristics of amorphous silica nanowires (a-SiONWs) grown on TiN/Ni/Si and TiN/Ni/SiO₂ substrates have been studied. A-SiONWs grown on TiN/Ni/Si substrates show a Si-rich composition compared to those grown from TiN/Ni/SiO₂/Si. The emission characteristics of the nanowires were found to depend on the type of substrate. By annealing the a-SiONWs grown on TiN/Ni/Si in air, emission bands shift from blue to green bands. It is likely that silicon to oxygen ratio is an important factor in deciding the types of defects and emission bands of amorphous silica nanowires.     

Enhanced activity of mesoporous Nb2O5 for photocatalytic hydrogen production

The mesoporous Nb₂O₅ photocatalysts were synthesized via an evaporation-induced self-assembly (EISA) method. The mesoporous structure of the as-made samples was studied by small-angle X-ray diffraction, N₂ adsorption-desorption isothermal and transmission electron microscopy. The increase of the calcination temperature during the synthesis resulted in enhanced crystallization, but decreased mesoporosity of the samples. The later was found to have a crucial influence on the photocatalytic activity by bringing on decreased BET surface area and especially increscent pore wall thickness. The advantage of the mesoporous Nb₂O₅ was also proved by performing 20 times higher photocatalytic activity than a bulk Nb₂O₅ without any porosity. A model was given to describe the effect of mesoporosity on the transportation and recombination of carriers.     

Large-scale synthesis of rutile SnO2 nanorods

A high yield of tin oxide (SnO₂) nanorods was obtained via annealing a nanoscale precursor in the molten salt flux and surfactant. X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, selected area electron diffraction and infrared spectroscopy showed that the nanorods are composed of SnO₂ with rutile structure. The surfactant and temperature have a profound influence on the production of SnO₂ nanorods.     

Synthesis of PEO/4Hb-TaS2 layered nanocomposite

Single-phase layered nanocomposite containing 4Hb-TaS₂ and poly(ethylene oxide) [PEO] has been first synthesized by using the exfoliation-adsorption technique. It has been characterized by powder X-ray diffraction (XRD) and electrical dc resistivity measurements. As the product exhibited lattice expansions along the stacking direction, PEO was intercalated into 4Hb-TaS₂ galleries.     

One-dimensional structures of Bi2O3 synthesized via metalorganic chemical vapor deposition process

We have demonstrated the synthesis of one-dimensional (1D) structures of bismuth oxide (Bi₂O₃) by a reaction of a trimethylbismuth (TMBi) and oxygen (O₂) mixture at 450 °C. Scanning electron microscopy showed that the product consisted of 1D materials with width or diameters less than 1 μm and lengths up to several tens of micrometers. The X-ray energy dispersive spectroscopy revealed that the materials contained elements of Bi and O. The results of X-ray diffraction and selected area electron diffraction pattern indicated that the obtained Bi₂O₃ were crystalline with monoclinic structure.     

Raman spectroscopic and photoluminescence study of single-crystalline SnO2 nanowires

Single-crystalline SnO₂ nanowires with sizes of 4-14 nm in diameter and 100-500 nm in length were produced in a molten salt approach by using hydrothermal synthesized precursor. Structural characters of the nanowires were examined by X-ray diffraction and high-resolution electron transmission microscopy. Raman, photoluminescence and X-ray photoelectron spectra of the samples were examined under heat treatments. Three new Raman modes at 691, 514 and 358 cm⁻¹ were recorded and assigned. The former two are attributed to activation of original Raman-forbidden A_2uLO mode and the third is attributed to defects in small-sized nanowires. A strong photoluminescence is observed at about 600 nm, the temperature effects is examined and the origin of the PL process is discussed via X-ray photoelectron spectra.     

Photoelectron spectroscopy of nanocrystalline anatase TiO2 films

Nanocrystalline TiO₂ (anatase) films were prepared using either colloidal suspensions or a sol-gel route. The electronic structure of these films was analyzed using X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). Apart from pristine films, films containing defects introduced by annealing under ultra-high vacuum conditions or by ion bombardment were investigated. Generally, annealing in the temperature range up to 720 K results in no significant changes in the XPS and UPS spectra as compared to the pristine state, indicating that the amount of defect formation is too low to be observable by these techniques. On the other hand, ion irradiation causes the appearance of distinct defect states; these could be identified in agreement with previous data from photoemission studies on rutile and anatase single crystals. From UPS, a valence-band width of ∼4.6 eV was determined for the nanocrystalline anatase films.     

Preparation and characterization of Cobalt Sulfophthalocyanine/TiO2/fly-ash cenospheres photocatalyst and study on degradation activity under visible light

Cobalt Sulfophthalocyanine (CoSPc) sensitized TiO₂ sol samples were prepared through a Sol-Gel method using Cobalt Sulfophthalocyanine as a sensitizer. Loading and modified floating photocatalyst was prepared by hydrothermal method using fly-ash cenospheres as a carrier. The properties of the samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and UV-vis diffuse reflectance spectrum (DRS). Photocatalytic activity was studied by degrading wastewater of methylene blue under visible light. The results indicate that the fly-ash cenospheres are covered by modified TiO₂ film which composed of the anatase, brookite and rutile misch crystal phase. CoSPc/TiO₂/fly-ash cenospheres samples have good catalytic activity under visible light, and have strong absorbency during 600-700 nm. The sensitization of CoSPc can enhance visible light catalytic activity of TiO₂/fly-ash cenospheres. The degradation rate of methylene blue reaches 73.36% in 180 min under the visible light illumination. But too much CoSPc can decrease its catalytic activity.     

Scalable synthesis of Sb(III)Sb(V)O4 nanorods from Sb2O5 powder via solvothermal processing

Scalable Sb(III)Sb(V)O₄ nanorods from Sb₂O₅ powder were prepared using solvothermal route. XRD and HRTEM demonstrate that the nanorods are single-crystal orthorhombic-Sb₂O₄ phase with several micrometers long and 200-300 nm diameter size. XPS result further shows that the antimony cations in the nanorods are composed of three valence and five valence antimony ions. The emission of the nanorods appears around 450 nm wavelength. The formation mechanism of the Sb(III)Sb(V)O₄ nanorods was discussed in detail.     

Cr-doping induced ferromagnetic behavior in antiferromagnetic EuTiO3 nanoparticles

We have synthesized a series of high quality EuTi_1−xCr_xO₃ (x = 0.0, 0.02, and 0.04) nanoparticles by simple sol-gel technique. The averaged grain size of these obtained nanoparticles displays no obvious change with Cr-doping and is about 100 nm. The structural and magnetic properties of EuTi_1−xCr_xO₃ (x = 0.0, 0.02, and 0.04) samples were detailedly investigated. It is found that the G-antiferromagnetic (G-AFM) ordering of pure EuTiO₃ can be significantly modified with slight Cr-doping, and finally the ferromagnetic behavior is enhanced for EuTi_1−xCr_xO₃ system with Cr-doping.     

Area-selectively sputtering the RuO2 nanorods array

The RuO₂ nanorods array is grown selectively on the SiO₂-patterned sapphire (SA) wafers using reactive sputtering. The area-selectivity is attributed to an early nucleation of RuO₂ and its fast surface coverage on SA (1 0 0) and (0 1 2), in contrast to the sluggish nucleation on glassy SiO₂ in the initial sputtering period. The growth domain is explored by investigating the temperature windows at sputtering power 40, 50, and 60 W. The low-temperature bound is limited by the mobility of precursors on SiO₂ surface, which enables the precursors to depart before aggregating into a large size to smear the non-growth region. The high-temperature bound is set by the horizontal growth which enlarges the rod width and deteriorates its one-dimensional feature. The temperature window shrinks with increasing sputtering power. The X-ray photoelectron spectra indicate the as-sputtered rod surface is ruthenium rich. The X-ray diffraction analysis shows that RuO₂ growth on SA (1 0 0) and (0 1 2) follows the epitaxial relations between RuO₂ and SA crystals.     

The optical absorption edge of brookite TiO2

The optical absorption edge of brookite TiO₂ was measured at room temperature, using natural crystals. The measurements extend up to 3.54 eV in photon energy and 2000 cm⁻¹ in absorption coefficient. The observed absorption edge is broad and extends throughout the visible, quite different from the steep edges of rutile and anatase. No evidence of a direct gap is seen in the range measured. The spectral dependence of the absorption strongly suggests that the brookite form of TiO₂ is an indirect-gap semiconductor with a bandgap of about 1.9 eV.     

Pt/N-codoped TiO2 nanotubes and its photocatalytic activity under visible light

Pt/N-codoped TiO₂ nanotubes were prepared and characterized by various analytical methods, such as transmission electron microscope (TEM), diffuse reflection spectra (DRS), X-ray powder diffraction (XRD), X-ray photoelectron emission spectroscopy (XPS) and fluorescence spectra (FL). The photocatalytic efficiency was evaluated by the photodegradation of Rhodamine B (RB) in an aqueous solution under visible light irradiation. It has been confirmed that Pt/N-codoped TiO₂ nanotubes could be excited by visible light and the recombination rate of electron-hole pairs declined significantly. The higher visible light activity is due to the codoping of nitrogen and platinum.     

On the spray-drying deposition of TiO2 photocatalytic films

The photocatalytic activity of TiO₂ films deposited on different substrates by the spray-drying method using suspensions of commercially available TiO₂ (Degussa P25 or Tronox) as starting material was studied. The influence of the type of the initial TiO₂, preparation conditions (temperature of the substrate during the film deposition, temperature of the post-deposition annealing), substrate material (glass, fused silica, stainless steel and graphite), the presence of additives in the spraying suspension (polyethylene glycol, ethylene glycol and acetylacetone) and its sonication before spraying on the morphology, size of crystallites and phase composition (rutile/anatase ratio) was studied. Optimal conditions for spray deposition of the films are suggested.