Effect of oxygen content and deposition temperature on the characteristics of thin silver films deposited by magnetron sputtering

Thin silver films were prepared by direct current magnetron sputtering in a single-ended in-line sputter system at various substrate temperatures and in O₂ contents in sputter gas, and their electrical, optical, structural and morphological properties together with the compositional properties were investigated. When deposited at room temperature, the electrical and optical properties of Ag films deteriorated with addition of O₂ to sputter gas. Deposition of Ag films in O₂ added sputter gas promoted the formation of Ag crystallites with (2 0 0) plane parallel to the substrate surface. The electrical resistivity and optical reflection of Ag films deposited above 100 °C were not affected by the sputtering plasma containing oxygen. X-ray photoelectron spectroscopic analysis showed that Ag films deposited above 100 °C in O₂ added sputter gas did not possess surplus oxygen in the film, and that the oxidation states of these films were almost identical to that of Ag films deposited in pure Ar gas.     

Structure and electrical properties of CdIn2O4 thin films prepared by DC reactive magnetron sputtering

CdIn₂O₄ thin films were prepared by direct-current (DC) reactive magnetron sputtering. The structure, surface morphology and the chemical composition of the thin films were analyzed by X-ray diffraction (XRD), atomic force microscope (AFM) and X-ray photoelectron spectroscopy (XPS), respectively. The electrical properties of the films prepared in different oxygen concentration and annealing treatment were determined, and the effects of the preparing conditions on the structure and electrical properties were also explored. It indicates that the CdIn₂O₄ thin films with uniform and dense surface morphology contain mainly CdIn₂O₄, In₂O₃ phases, and CdO phase is also observed. The XPS analysis confirms the films are in oxygen-deficient state. The electrical properties of these films significantly depend on the preparing conditions, the resistivity of the films with the oxygen concentration of 4.29% is 2.95 × 10⁻⁴ Ω cm and the Hall mobility is as high as 60.32 cm²/V s. Annealing treatment can improve the electrical performance of the films.     

Epitaxial growth of Co(0 0 0 1)hcp/Fe(1 1 0)bcc magnetic bi-layer films on SrTiO3(1 1 1) substrates

Co(0 0 0 1)_hcp/Fe(1 1 0)_bcc epitaxial magnetic bi-layer films were successfully prepared on SrTiO₃(1 1 1) substrates. The crystallographic properties of Co/Fe epitaxial magnetic bi-layer films were investigated. Fe(1 1 0)_bcc soft magnetic layer grew epitaxially on SrTiO₃(1 1 1) substrate with two type variants, Nishiyama–Wasserman and Kurdjumov–Sachs relationships. An hcp-Co single-crystal layer is obtained on Ru(0 0 0 1)_hcp interlayer, while hcp-Co layer formed on Au(1 1 1)_fcc or Ag(1 1 1)_fcc interlayer is strained and may involve fcc-Co phase. It has been shown possible to prepare Co/Fe epitaxial magnetic bi-layer films which can be usable for patterned media application.     

Effects of substrate temperature on properties of NbNx films grown on Nb by pulsed laser deposition

NbN_x films were deposited on Nb substrate using pulsed laser deposition. The effects of substrate deposition temperature, from room temperature to 950 °C, on the preferred orientation, phase, and surface properties of NbN_x films were studied by X-ray diffraction, atomic force microscopy, and electron probe micro analyzer. We find that the substrate temperature is a critical factor in determining the phase of the NbN_x films. For a substrate temperature up to 450 °C the film showed poor crystalline quality. With temperature increase the film became textured and for a substrate temperature of 650−850 °C, mix of cubic δ-NbN and hexagonal phases (β-Nb₂N + δ′-NbN) were formed. Films with a mainly β-Nb₂N hexagonal phase were obtained at deposition temperature above 850 °C. The c/a ratio of β-Nb₂N hexagonal shows an increase with increased nitrogen content. The surface roughness of the NbN_x films increased as the temperature was raised from 450 to 850 °C.     

Effects of crystalline quality on the ultraviolet emission and electrical properties of the ZnO films deposited by magnetron sputtering

The ZnO films were deposited on c-plane sapphire, Si (0 0 1) and MgAl₂O₄ (1 1 1) substrates in pure Ar ambient at different substrate temperatures ranging from 400 to 750 °C by radio frequency magnetron sputtering. X-ray diffraction, photoluminescence and Hall measurements were used to evaluate the growth temperature and the substrate effects on the properties of ZnO films. The results show that the crystalline quality of the ZnO films improves with increasing the temperature up to 600 °C, the crystallinity of the films is degraded as the growth temperature increasing further, and the ZnO film with the best crystalline quality is obtained on sapphire at 600 °C. The intensity of the photoluminescence and the electrical properties strongly depend on the crystalline quality of the ZnO films. The ZnO films with the better crystallinity have the stronger ultraviolet emission, the higher mobility and the lower residual carrier concentration. The effects of crystallinity on light emission and electrical properties, and the possible origin of the n-type conductivity of the undoped ZnO films are also discussed.     

Emission properties of Ti-DLC films prepared by unbalanced magnetron sputtering

The field emission properties of Ti-DLC films in diode and coplanar device structures were studied. An emission current density of 1.14 A/cm² could be obtained at an applied field of 33 V/μm and the threshold field was 24 V/μm for the coplanar emission structure. The silicon substrate was found to limit the emission current in the diode structure because of its high resistivity.     

Preparation of CuInGeSe4 thin films by selenization method using the Cu-In-Ge evaporated layer precursors

CuInGeSe₄ quaternary compounds are known to have a chalcopyrite-like structure and have band gaps of about 1.3 eV, suitable for optimum conversion efficiency for solar cells. We have prepared the CuInGeSe₄ thin films by the selenization method using the Cu-In-Ge evaporated layer precursors. The analyses of X-ray diffraction show that the single phase of CuInGeSe₄ is obtained by the selenization of precursors at 450-500 °C. The SEM observation of film surface shows that the grain sizes are in the order of 1-2 μm. The band gaps of selenized films close to 1.6 eV are wider than that of bulk crystals (about 1.3 eV). These films have p-type conduction and higher electrical resistivities than more 10⁵ Ω cm at room temperature.     

Substrate and orientation influence on electrical properties of sputtered La-doped PZT thin films

Pb_1−2y/3La_yZr_xTi_1−xO₃ (PLZT) thin films have been prepared “in situ” by multi-target sputtering on Silicon, LaAlO₃ (LAO) and MgO substrates covered with a Pt bottom electrode. The purpose was to grow tetragonal PLZT films (Zr/Ti = 28/72 with different La contents) on these various substrates and to compare their electrical properties. To this aim, Pt was first deposited on the three different substrates to get (1 1 1)Pt/Si, (1 1 1)Pt/LAO and (2 0 0)Pt/MgO. Then PLZT was deposited in a same run on these three kinds of substrates and the influence of La contents and film orientation on electrical properties was investigated. The La content was varied from y = 0 to y = 32 in order to explore the phase transition between ferroelectric and paraelectric phases as a function of the substrate. For large amount of Lanthanum, relaxor behavior has been observed and studied.     

Effect of substrate temperature on structure and electrical resistivity of laser-ablated IrO2 thin films

IrO₂ thin films were prepared on Si(1 0 0) substrates by laser ablation. The effect of substrate temperature (T_sub) on the structure (crystal orientation and surface morphology) and property (electrical resistivity) of the laser-ablated IrO₂ thin films was investigated. Well crystallized and single-phase IrO₂ thin films were obtained at T_sub = 573-773 K in an oxygen partial pressure of 20 Pa. The preferred orientation of the laser-ablated IrO₂ thin films changed from (2 0 0) to (1 1 0) and (1 0 1) depending on T_sub. With the increasing of T_sub, both the surface roughness and crystallite size increased. The room-temperature electrical resistivity of IrO₂ thin films decreased with increasing T_sub, showing a low value of (42 ± 6) × 10⁻⁸ Ω m at T_sub = 773 K.     

Effect of annealing temperature on the microstructure and optical–electrical properties of Cu–Al–O thin films

We have successfully prepared Cu–Al–O thin films on silicon (100) and quartz substrates by radio frequency (RF) magnetron sputtering method. The as-deposited Cu–Al–O film is amorphous in nature and post-annealing treatment in argon ambience results in crystallization of the films and the formation of CuAlO₂. The annealing temperature plays an important role in the surface morphology, phase constitution and preferred growth orientation of CuAlO₂ phase, thus affecting the properties of the film. The film annealed at 900 °C is mainly composed of CuAlO₂ phase and shows smooth surface morphology with well-defined grain boundaries, thus exhibiting the optimum optical–electrical properties with electrical resistivity being 79.7 Ω·cm at room temperature and optical transmittance being 80% in visible region. The direct optical band gaps of the films are found in the range of 3.3–3.8 eV depending on the annealing temperature.     

Control of a- and c-plane preferential orientations of ZnO thin films

We report orientation-controllable growth of ZnO thin films and their orientation-dependent electrical characteristics. ZnO thin films were deposited on single-crystalline (1 0 0) LaAlO₃ and (1 0 0) SrTiO₃ substrates using pulsed laser deposition (PLD) at different substrate temperatures (400-800 °C). It was found that the orientation of ZnO films could be controlled by using different substrates of single-crystalline (1 0 0) LaAlO₃ and (1 0 0) SrTiO₃. The a-plane () and c-plane (0 0 0 2) oriented ZnO films are formed on LaAlO₃ and SrTiO₃, respectively. In both cases, the degree orientation increased with increasing deposition temperature T_s. Both the surface free energy and the degree of lattice mismatch are ascribed to play an important role for the orientation-controllable growth. Further characterization show that the grain size of the films with both orientations increases for a substrate temperature increase (i.e. from T_s = 400 °C to T_s = 800 °C), whereas the electrical properties of ZnO thin films depend upon their crystalline orientation, showing lower electrical resistivity values for a-plane oriented ZnO films.     

Effects of processing on the electrical and structural properties of spray deposited CdS:In thin films

Polycrystalline CdS:In thin films were prepared by the Spray pyrolysis technique (SP) at a substrate temperature T_s=490 °C. The effects of annealing in nitrogen atmosphere at 400 °C and HCl-etching on the electrical and structural properties of the films were investigated. The electrical properties were studied through the analysis of the I-V curves, while the structural properties were studied through the analysis of the X-ray diffraction (XRD) patterns and the scanning electron microscope (SEM) images. An increase in the films’ resistivity was occurred after annealing and/or HCl-etching, which was accompanied by changes in the XRD patterns and SEM images. These changes were related to a phase change from the mixed (cubic and hexagonal) phase to the hexagonal phase which was expected to occur during the aforementioned processes. The X-ray diffraction (XRD) patterns and the scanning electron microscope images confirm this expectation.     

Improvement of electrical properties of Sr-modified (Pb,Ca)TiO3 thin films grown by soft chemistry route

Strontium and calcium-modified lead titanate (Pb_0.70Ca_0.15Sr_0.15)TiO₃ soft chemistry-derived thin films were prepared on platinum-coated silicon substrate by spin-coating method. Investigations were made on the structure, surface morphology and electrical properties of the film. The results by XRD and FE-SEM showed that the film exhibits a pure tetragonal perovskite phase and an average grain size of about 50-60 nm, respectively. Electrical measurements of a metal-ferroelectric-metal type capacitor exhibited a stable and switchable electrical polarization in the film. The structure of the Au/PCST/Pt capacitor showed well-saturated hysteresis loops at an applied voltage of 300 kV/cm with remanent polarization and coercive field values of 22 μC/cm² and 100 kV/cm, respectively. At 100 kHz, the dielectric constant and the dielectric loss of the (Pb_0.70Ca_0.15Sr_0.15)TiO₃ thin film with thickness 240 nm were 528 and 0.05, respectively.     

Spray pyrolytic synthesis of samarium doped ceria (Ce0.8Sm0.2O1.9) films for solid oxide fuel cell applications

Uniform, adherent, single phase samarium doped ceria films have been successfully deposited by spray pyrolysis technique for their application in solid oxide fuel cell. These films have been deposited at different substrate temperatures on glass substrate and subsequently heat treated in tube furnace. Effect of substrate temperature and annealing temperature on phase formation was studied with thermo-gravimetric analysis and differential temperature analysis, X-ray diffraction, scanning electron microscope, and energy dispersive X-ray analysis techniques. These studies showed the formation of single phase Ce_0.8Sm_0.2O_1.9 films, at substrate temperature 400 °C and annealing temperature 550 °C. Electrical resistivity of the films, at room temperature was of the order of 10⁷ Ω cm while at 400 °C it is found to be of the order of 10¹ Ω cm. This reveals the use of these films for making low temperature solid oxide fuel cells.     

Role of the mercury pressure during reaction synthesis of Hg(Re)-based superconducting films

Thin films of mercury based superconductors were prepared on the R-plane sapphire with a CeO₂ buffer layer using a two step process involving the deposition of the Hg-free precursor and ex situ mercuration in the sealed quartz tube. For the thin film preparation, a method with no contact between the mercury source and the precursor film was used for mercuration. We studied the influence of the basic parameters of the mercuration (annealing time, temperature and partial pressure of the mercury) regarding the composition and superconducting properties of prepared Hg-based films to determine appropriate conditions for this mercuration method. We found out that an increased partial pressure of mercury inhibited the creation of the parasitic Re-based phase and supported the crystallization of the superconducting phase. The advantage of this mercuration method is higher reproducibility as well as its capability to prepare high quality thin large areas films. Presented at 5-th International Conference Solid State Surfaces and Interfaces, November 19–24, 2006, Smolenice Castle, Slovakia     

Influence of substrate temperature on electrical and optical properties of p-type semitransparent conductive nickel oxide thin films deposited by radio frequency sputtering

Nickel oxide thin films were deposited on fused silica and Si(1 0 0) substrates at different substrate temperatures ranging from room temperature to 400 °C using radio frequency reactive magnetron sputtering from a Ni metal target in a mixture of O₂ and Ar. With the increase of substrate temperature, nickel oxide films deposited on the Si substrates exhibit transition from amorphous to poly-crystalline structures with different preferred orientations of NiO(2 0 0) and (1 1 1). The films deposited at higher temperature exhibit higher Ni²⁺/Ni³⁺ ratio. With substrate temperature increasing from room temperature to 400 °C, the electrical resistivities of nickel oxide films increase from (2.8 ± 0.1) × 10⁻² to (8.7 ± 0.1) Ω cm, and the optical band-gap energies increase from 3.65 to 3.88 eV. A p-nickel oxide/n-zinc oxide heterojunction was fabricated to confirm the p-type conduction of nickel oxide thin film, which exhibited a steadily rectifying behavior.     

Epitaxial growth and structural characterization of Pb(Fe1/2Nb1/2)O3 thin films

We have grown lead iron niobate thin films with composition Pb(Fe_1/2Nb_1/2)O₃ (PFN) on (0 0 1) SrTiO₃ substrates by pulsed laser deposition. The influence of the deposition conditions on the phase purity was studied. Due to similar thermodynamic stability spaces, a pyrochlore phase often coexists with the PFN perovskite phase. By optimizing the kinetic parameters, we succeeded in identifying a deposition window which resulted in epitaxial perovskite-phase PFN thin films with no identifiable trace of impurity phases appearing in the X-ray diffractograms. PFN films having thicknesses between 20 and 200 nm were smooth and epitaxially oriented with the substrate and as demonstrated by RHEED streaks which were aligned with the substrate axes. X-ray diffraction showed that the films were completely c-axis oriented and of excellent crystalline quality with low mosaicity (X-ray rocking curve FWHM?0.09°). The surface roughness of thin films was also investigated by atomic force microscopy. The root-mean-square roughness varies between 0.9 nm for 50-nm-thick films to 16 nm for 100-nm-thick films. We also observe a correlation between grain size, surface roughness and film thickness.     

Characterization of SnO2 obtained from the thermal oxidation of vacuum evaporated Sn thin films

Tin oxide has been prepared by thermal oxidation of evaporated tin thin films onto pyrex glass substrates. Films oxidation was achieved in air at a temperature of 600 °C with varied duration from 20min to 3 h. Structural, optical and electrical properties of the films were characterized by means of X-ray diffraction, UV–vis spectroscopy and electrical resistivity measurements respectively. The X-ray analysis revealed the transformation of Sn into SnO₂ with preferential orientation along (101) plans. No intermediate phases such as SnO and Sn₃O₄ were evidenced. It was also found that the SnO₂ crystallites orientation changed with the annealing time due to the strain energy effect. Both band gap energy and electrical resistivity decrease with annealing time due to the crystalline quality improvement and films densification. We have noticed that oxidation at 600 °C for 3 h leads to transparent and conductive films with suitable properties for photovoltaic applications.     

Epitaxial growth of Ba8Ga16Ge30 clathrate film on Si substrate by RF helicon magnetron sputtering with evaluation on thermoelectric properties

Epitaxial Ba₈Ga₁₆Ge₃₀ clathrate thin films were successfully grown on Si substrate by using helicon magnetron sputtering. The (1 0 0) lattice of Ba₈Ga₁₆Ge₃₀ was identified grown on four Si(2 0 0) lattices in small mismatch (0.1%). Both the color of samples and XRD results suggest 600 °C is the optimal substrate temperature for the growth of high quality Ba-Ga-Ge clathrate film on Si substrates. High Seebeck coefficients and electrical resistivities for the deposited clathrate thin films in comparison with those of bulk are obtained. The high crystal quality and thermionic effects in heterostructures may contribute to the larger Seebeck coefficients, while the increasing of interface scattering for electrons probably is the reason for large electrical resistivities. Although the thermoelectric (TE) results are not ideal as designed, our results are significant due to the first successful work on epitaxial growth of Ba₈Ga₁₆Ge₃₀ clathrate thin films on Si substrate with large Seebeck coefficient.     

Growth of textured nonstoichiometric MoTe2 films from Mo/Te layers and their use as precursor in the synthesis of MoTe2−xSx films

Molybdenum ditelluride, MoTe₂, thin films have been prepared on a glass substrate by depositing first a layer of Mo of 1 μm thickness by rf sputtering and then layers of tellurium of 4 μm thickness followed by annealing, in a vacuum sealed Pyrex tube, at 823 K for one hour. The films have been studied by X-ray diffraction, electron microprobe analysis, scanning electron microscopy and for optical and electrical properties. This indicated that the films so prepared are well crystallized and textured with a hexagonal structure similar to 2H-MoS₂. However, the film is non stoichiometric due to the presence of small amounts of oxygen. The optical properties are in good agreement with those of single crystals and film deposited by other means. The room temperature conductivity is of the same order of magnitude as that of single crystals. Finally, MoTe₂ has been used as a precursor for the growth of MoTe_2−xS_x films.