Experimental implementation of multiplexing/demultiplexing in digital images using virtual phase conjugation for holographic data storage

We experimentally implemented and proved the concept of multiplexing and demultiplexing in digital images using virtual phase conjugation, which was proposed in our previous study. In the experiment, we concluded that two digital images multiplexed in a single signal beam are recorded in a holographic medium, and these images are independently and successfully reproduced. In this method, the digital images are multiplexed by superimposing them on a complex amplitude, and not using volume hologram’s multiplexing. Thus, the exposure amount in the holographic medium is constant regardless of the number of multiplexing of digital images, and the method has great potential for achieving high recording density.     

Numerical simulations on the focus-shift multiplexing technique for self-referential holographic data storage

For increasing the data density of holographic data storage (HDS), combining more than two multiplexing techniques is effective. This is also true in self-referential holographic data storage (SR-HDS) that enables holographic recording purely with a single beam. In this paper, a focus-shift multiplexing technique is applied to \(xy\)-shift multiplexed SR-HDS, the feasibility of which has been shown in our previous work. The focus-shift multiplexing technique enables the multiplexing of datapages by slightly changing the focal length of the objective lens. However, the required focus-shift distance for multiplexing and the implementation method of the focus-shift have not been clarified. First, the focus-shift selectivity is investigated by the numerical simulations. In the case where the focus-shift multiplexing technique is applied to \(xy\)-shift multiplexed SR-HDS, the inter-page crosstalk properties are clarified to decide the recording layout that can achieve a low-crosstalk readout. Second, the technique of displaying an additional phase pattern onto the spatial light modulator (SLM) is introduced, which is a focus-shift method without any special optical components, such as varifocal lenses. Finally, we investigate the relationship between the accuracy of the focus-shift and the parameters of SLM.     

A Color Holographic Reconstruction System by Time Division Multiplexing with Reference Lights of Laser

3D-TV systems by holography technique have been studied in the world. In this paper, we report a color holographic reconstruction system by time division multiplexing method with reference lights of laser. The method can reconstruct a color holographic image by switching reference lights of red, green and blue colors at certain intervals. We can observe a color holographic image using red and green lasers as the reference lights, a high minute liquid crystal display (LCD) panel as a spatial light modulator (SLM) and electro-shutters as the shuttering device of the laser lights in the optical system. This approach has some advantages. Namely, the structure of the optical system can be simple and the number of LCD panels in the optical system can be decreased.     

Deterministic Phase Encoded Holographic Data Storage Using Lenticular Lens Array

This work presents a novel optical holographic encrypted data storage approach based on a phase encoding multiplexed scheme. In the proposed data storage scheme, patterns to be encrypted are stored holographically in a photorefractive LiNbO₃:Fe crystal using a lenticular lens array (LLA) sheet phase-encoded multiplexing. Experimental results reveal that rotating an LLA placed as a phase modulator in the path of the reference beam is a simple but effective method of increasing the phase addresses for holographic memory in a crystal. Combining this rotational multiplexing with two-axis rotating multiplexing provides further data storage and data encryption capacity.     

Unitary matrices for phase-coded holographic memories

We propose a novel type of unitary matrix for phase-code multiplexed holographic memories, which could be quickly generated from geometric sequences. Our analysis shows that the phase-code matrices are unitary rather than orthogonal. The new matrices have complex elements. The order of unitary matrices can be any positive integer, so that we can accommodate the available spatial light modulators to obtain the maximum possible storage capacity. The cross-talk noises in phase-encoded memories with unitary matrices and with Hadamard matrices are of the same order of magnitude, which are much lower than those in holographic memories with wavelength multiplexing or angle multiplexing.     

A simple technique for holographic multiplexing

A technique for holographic multiplexing is proposed which utilizes a combination of theta modulation and carrier frequency multiplexing. Twenty two binary transparent object were multiplexed with this technique and a resolution of 10 lines/mm with good diffraction efficiency was obtained. The technique can be used for studying the sequential events at discrete time intervals.     

多路角度复用体全息三维显示技术

为满足高分辨率真三维大数据显示的空间带宽积要求,提出一种基于多通道角度复用模式的体全息三维显示技术。通过对三维场景进行波前编码,获得相位计算全息图,并将计算全息图依次按照不同角度复用记录到掺杂金纳米颗粒体全息光致聚合物材料的同一区域,获得复用体全息图,再现时可以在不同角度观察三维场景。在体全息三维显示实验系统中,实现体全息材料记录区域的单点像素总数为120×1 920×1 080,显示的空间带宽积达到了2.5×108,相对于空间光调制器显示提升了120倍。     

Quasi-Fourier transform hologram format for data storage

For a recording medium such as dichromated gelatin, a quasi-Fourier transform holographic memory is preferred over the exact Fourier transform. We proceed here with angular multiplexing and consider undesired reconstructed waves such as cross-talk noise, and show that the signal-to-noise ratio is 33 dB for 20 angular multiplexed elements in 25 μm thickness of the recording medium. We also study the energy coupling between gratings to standardize the diffraction efficiency of each multiplexed grating.     

Two-step holographic recording in photorefractive lithium niobate crystals using ultrashort laser pulses

We investigate non-volatile holographic data storage in photorefractive lithium niobate crystals. Infrared picosecond laser pulses are used to write holograms after sensitizing the crystal with blue light from a cw-laser. The dependence of the dynamic range and the photoconductivity on the pulse intensities and the recording wavelength is investigated in detail. The results can be explained by a two-center model if the mean intensity of the laser pulses is considered. We demonstrate that several fixed holograms can be multiplexed by employing the wavelength multiplexing technique.     

Orthogonal-reference-pattern-modulated shift multiplexing for collinear holographic data storage

A novel hybrid shift multiplexing method for collinear holographic data storage (CHDS) by using orthogonal reference patterns (RPs) is proposed, analyzed, and demonstrated. For this method, holograms are multiplexed by not only shifting the media but also using different RPs. Compared with the traditional method, the shift pitch for the hybrid method is substantially reduced because of the selectivity introduced by different RPs. The interpage cross talk due to Bragg mismatch and degeneracy for multiplexing holograms in the same volume by using orthogonal RPs is also attenuated by utilizing the shift selectivity of the hologram. A 1.5 μm shift pitch is experimentally achieved by using three amplitude RPs in a system that would be 4.5 μm with only one RP. This new method offers an alternative to significantly increase the data density and transfer rate of the CHDS system given that the media has ideal properties.     

反射式体全息存储角度复用新方案

基于体全息的反射式记录原理,设计并搭建了不同于传统透射式光路的紧凑型反射式体全息存储光路,提出一种新的采用双透镜共焦方法实现数据存储的角度复用方案.通过此系统实现了单点2 000幅图像的连续存储.实验结果表明,反射式光路可以增大全息图的衍射率进而提高存储图像的质量;而双透镜共焦方案易实现且便于控制,可以实现图像的连续存储和高准确度复用;同时减少了光学系统的复杂度,并把复用维度从一维扩展到了水平和垂直二维方向,提高了存储的密度.     

彩色全息显示中液晶空间光调制器位相调制偏差的矫正方法

采用三基色激光照明并结合时分复用或空间复用技术,可实现基于液晶空间光调制器(LC-SLM)的彩色全息显示.但由于在不同激光波长入射条件下LC-SLM的位相调制特性曲线不同,难以同时满足多波长入射条件下2π线性位相调制的要求,致使彩色全息再现结果受到共轭像和零级斑的干扰.针对该问题,本文通过实验测试获得LC-SLM在不同波长入射时的位相调制特性曲线,并分析了RGB激光器各分量的位相调制特性曲线非线性偏差和调制幅度偏差对多阶位相型傅里叶变换相息图再现效果的影响.根据"查表法"建立了各波长入射条件下满足2π线性位相调制的灰度映射关系,并对RGB分量相息图进行修正.通过对修正前后RGB分量相息图的数值模拟再现和光电再现实验与分析,结果表明:该方法有效地克服了LC-SLM位相调制特性曲线偏差的不利影响,从而改善了彩色全息显示中各分量相息图的再现质量.     

动态全息三维显示研究最新进展

全息三维显示是真三维显示技术, 其原理是利用光学干涉记录和衍射再现将物体或场景的三维信息全部重建出来, 所以观看全息三维图像与观看真实物体或场景的效果一样. 近期全息研究领域有一些突破性的成果被报道, 将推动全息显示的应用不断走向成熟. 本文将重点介绍基于光学材料和空间光调制器为全息图承载载体的动态全息三维显示最新发展状况. 虽然动态全息三维显示研究仍然存在挑战, 但最近研究中已经利用光学材料实现了实时动态全息三维视频显示, 这为未来实现大尺寸、高分辨率、彩色全息真三维视频显示提供了可能.     

Ellipse-Like Orbital Angular Momentum Multiplexed Holography and Efficient Decryption Utilizing a Composite Ellipse-Like Lens

The utilization of orbital angular momentum (OAM) as an independent degree of freedom for information encryption has gained significant attention. Nevertheless, the multiplexing capacity of OAM is still constrained, and there is a lack of research on accelerated decryption techniques in OAM multiplexed holography. In this study, ellipse-like orbital angular momentum (EL-OAM) multiplexed holography is proposed and implemented. The ellipse-like (EL) beam incorporates three modulatable parameters: topological charge, power index, and radial shift. To achieve efficient decryption, a composite ellipse-like lens (CELL) is introduced that generates two EL beams carrying different OAMs at distinct axial positions, resulting in two reconstruction holographic images with approximately equal intensity. The mode selectivity of EL-OAM based on the aforementioned parameters is investigated. Experimental verification demonstrates the feasibility of EL-OAM multiplexed holography and its potential for fast decryption in various dimensions. This breakthrough opens up new possibilities for practical information encryption and decryption systems.     

Single-exposure super-resolved interferometric microscopy by red-green-blue multiplexing

We present single-exposure super-resolved interferometric microscopy (SESRIM) as a novel approach capable of providing one-dimensional (1-D) super-resolution (SR) imaging in holographic microscopy using a single illumination shot. The single-exposure SR working principle is achieved by combining angular and wavelength multiplexing incoming from a set of tilted beams with different wavelengths where each wavelength is tuned with the red-green-blue (RGB) channels of a color CCD. Thus, the information included in each color channel is retrieved by holographic recording using a single-color CCD capture and by analyzing the RGB channels. Finally, 1-D SR imaging is obtained after the digital postprocessing stage yielding the generation of a synthetic aperture. Experimental results are reported validating the proposed SESRIM approach while an extension of the proposed approach to the two-dimensional case is considered.     

Holographic digital data storage using phase-modulated pixels

We propose and demonstrate the use of phase images for holographic data storage. Use of phase images as input leads to uniform diffraction efficiency of multiplexed data pages. Use of binary phase-based data pages with 0 and π phase changes produces uniform spectral distribution at the Fourier plane. This in turn facilitates better recording of higher spatial frequencies. We experimentally demonstrate a phase-based holographic data storage system using shift multiplexing in a Fe:LiNbO₃ crystal, and use it for associative retrieval. Preliminary studies indicate high discrimination capabilities of phase-based holographic data storage system over the amplitude-based system in a content-addressable memory.     

Analysis of multiplexed holograms stored in a thick PVA/AA photopolymer

Multiplexing many holograms in photopolymers over 500 μm thick poses many problems associated with Beer’s law. In fact, the commercial holographic films (Aprilis and Inphase for example) are around 300 μm thick. For this range of thickness of absorbent photopolymeric materials, the gratings are recorded using all the thickness of the layer. Since the optical thicknesses of the multiplexed gratings are similar, it is easy to obtain an optimized time schedule to maximize the capacity of the material. For large thicknesses, the different effective optical thickness of each hologram requires an accurate prediction of each effective optical thickness in order to determine the minimum separation necessary between two consecutive multiplexed holograms. In this study, we have checked the experimental utility of the schedule model presented in a previous study to predict the multiplexing process of many gratings in a PVA/acrylamide photopolymer.     

Achromatic diffractive lens written onto a liquid crystal display

We propose a programmable diffractive lens written onto a liquid crystal display (LCD) that is able to provide equal focal lengths for several wavelengths simultaneously. To achieve this goal it is necessary that the LCD operate in the phase-only regime simultaneously for the different wavelengths. We design the appropriate lens for each wavelength, and then the lenses are spatially multiplexed onto the LCD. Various multiplexing schemes have been analyzed, and the random scheme shows the best performance. We further show the possibility of finely tuning the chromaticity of the focal spot by changing the relative weights of the multiplexing among the various wavelengths.     

Optical data storage in LC cells

Liquid crystal devices as a medium for holograms storage have been investigated. Long term memory effects in LC cells have been observed. Experiments proved that certain combination of insulating alignment layers has a major influence on the long term memory effect. Optimal liquid crystal cell construction allows us to achieve sufficient diffraction efficiency to record holographic patterns and to develop a re-writable holographic medium. The configuration of PVK and polyimide layers in LC cell construction with specific LC mixture was tested. The method of permanent and re-writable recording of optical data (holographic pattern) onto LC cells was achieved. However, the method of erasing recorded data was realized but mechanisms of this phenomenon are not clearly understood yet.     

Spatiotemporal multiplexing and streaming of hologram data for full-color holographic video display

We propose a new approach to spatiotemporally multiplex sub-holograms and stream hologram data in parallel by using multiple spatial light modulators (SLMs) to increase the spatiotemporal resolution of holographic display system. With the proposed approach, we have achieved a spatiotemporal resolution of 4.5 × 10¹⁰ pixel/s, as compared with 1.89 × 10⁹ pixel/s of a single SLM. Each frame of computer-generated hologram video has a pixel count of 378 Mpixels and is divided into 288 sub-holograms, each of 1.31 Mpixels. During the playback of holographic video, these sub-holograms are spatiotemporally multiplexed and streamed in parallel to form the integrated hologram within 16.67 ms, which enables full-color holographic video display with a 10-in. diagonal at a hologram data frame rate of 60 frames per second (fps). New SLM devices with higher spatiotemporal resolution need to be developed in order to meet the data bandwidth requirement of about 10¹²–10¹⁴ pixel/s for future 3D holographic displays.