便携式红外目标模拟器的研制

针对导弹整体性能测试中目标体红外辐射强度和运动特性的模拟需求,研制了基于卡塞格林式准直光学原理的便携式红外目标模拟器。该目标模拟器采用抛物面型主反射镜与双曲面型次反射镜相结合的卡塞格林准直光管作为光学系统,采用黑体作为辐射源,在可变小孔光阑和旋转台的配合下,实现了对红外目标运动特性和辐射强度的模拟。经检测表明,研制的目标模拟器焦距为414.8mm,系统出射光平行度小于10″,黑体辐射温度范围大于80℃,可为测试红外导引头的角运动情况和红外辐射强度提供一条有效的技术途径。     

定向红外对抗系统的激光源模拟研究

针对半实物仿真中定向红外对抗系统的有效模拟问题,在分析定向红外对抗激光源技术的基础上,依据实战应用,计算得到3 m~5 m波段定向红外对抗激光源的辐射能量为飞机红外辐射强度绝对值的8倍,结合波长4 m处简化的大气传输透过率随传输距离的变化,推导出实战应用中红外导引头上辐射照度随飞机导弹之间距离的变化规律。设计半实物仿真中定向红外对抗的模拟方案,依据逼真模拟的原则,计算得到模拟激光源能量随飞机导弹之间距离和飞机辐射强度的变化规律,据此将飞机导弹相互距离1 km时刻的红外干扰源辐射能量设置为波长4 m模拟激光源能量,其他距离的模拟能量通过衰减片来控制。为提高定向红外对抗模拟的通用性和智能性,设计了模拟激光源的闭环控制方案。     

一种靶机红外辐射特性增强技术研究

为了在外场试验中检验红外制导武器系统的工作性能,需要使用靶机红外增强装置实现对真实目标红外辐射特性的模拟。介绍了一种利用光学方法实现靶机红外辐射增强和目标辐射特性模拟的技术。使用高亮度红外光源作辐射源,通过对光学系统的控制,在实现红外辐射增强的同时,可模拟不同距离和方向的红外辐射强度特性。通过建模对所模拟目标的红外辐射强度及辐射方向特性进行了分析,并以此为设计依据设计了光学系统。实现了对最大红外辐射强度为1600W/sr的目标辐射方向特性的模拟。     

红外/激光双模共口径光学系统设计

针对未来导弹的发展趋势,提出一种红外/激光双模共口径光学系统设计方案,可用于获取目标的双模信息。分析了光学系统的基本参数,研究了双模共口径系统的设计思想,并进行了光学系统设计。所设计系统实现了长波红外和激光双波段的共口径成像。红外部分相对孔径1.27,光学系统传递函数接近于衍射限;激光部分相对孔径0.63,接近于理论极限,成像光斑能量分布均匀,线性区范围内光斑变化较小。     

紫外告警系统探测距离的估算

介绍了紫外告警原理及紫外告警系统的结构组成。基于典型目标(导弹)的紫外辐射特征和紫外辐射的大气传输特性,结合紫外告警系统探测器件的性能参数,根据像平面照度公式,提出了紫外告警系统探测距离的估算方法及模型,实例计算并验证了紫外告警系统在不同观察方位角对固体推进剂导弹的探测距离。分析研究表明,改变CCD最小照度值,像管的增益,光学系统的透过率和相对孔径等探测传感器的性能参数,可以提高紫外告警系统的探测距离。     

大相对孔径紧凑型无热化红外光学系统设计

根据目前搜索和跟踪系统要求其红外成像光学系统具有高成像质量、超轻小型化和高温度适应性的特点。采用折反射式光学系统结构形式,基于J-T制冷型320×320凝视焦平面阵列探测器,设计了一种大相对孔径紧凑型无热化红外光学系统,光学系统远摄比达到0.6。采用光学被动消热差方法进行设计,使该系统在-40℃～60℃温度范围内实现了无热化。同时采用杂散辐射分析软件对系统进行杂散辐射分析,提出合理杂辐射抑制方案,给出了完整的光学系统设计。结果表明,光学系统在不同温度环境下所有视场的调制传递函数(MTF)(17lp/mm)均接近衍射极限,80%的能量集中在1个像元内,且具有结构紧凑、体积小等优点,可满足搜索和跟踪红外光学系统的使用要求。     

迎头方向隐身导弹红外辐射特性分析北大核心CSCD

隐身导弹应用红外隐身技术将降低导弹被红外探测系统的发现概率。通过以AGM-158C导弹为参考,对迎头观测方向目标的红外辐射特性,包括目标蒙皮、目标蒙皮反射周围背景和目标尾焰的红外辐射强度进行估算,并与典型亚音速导弹红外辐射特性的数据进行对比分析。分析结果表明:红外隐身技术可以明显降低导弹的中、长波红外辐射,尤其是中波波段的红外辐射;红外探测系统设计时尾焰探测通常选用中波红外探测器,弹体探测通常选用长波红外探测器;隐身导弹采用红外隐身技术将提高导弹的突防能力。     

导弹逼近告警器及无源干扰设备测试软件设计

为解决导弹逼近告警器及无源干扰设备测试成本高、维护保障难的问题,研制了一套导弹逼近告警器及无源干扰设备自动检测系统;设计了系统测试软件,按照模块化设计方式,针对设备检测需求,开发不同的软件测试模块并集成;该系统集成度高,配置灵活,操作智能化,功能完整,测试项目全,测试和排故障效率高;经试用表明,该检测系统具有良好的操作性和维护性,可以为导弹逼近告警器及无源干扰设备检测维修提供技术支持,有效节省测试成本和维护保障费用。     

32×64元硅化铂肖特基势垒红外焦平面列阵的物理设计

本文介绍了国内首见报导的32×64元硅化铂肖特基势垒红外焦平面的物理设计方法。作者从计算探测目标的辐射能量出发,综合考虑了器件的结构、材料和工艺参数,电参数,光学系统参数和响应率的非均匀性,以信嗓比作为焦平面的品质因数进行了性能优化计算。根据系统参数和现有工艺条件,预计焦平面对室温景物成象的温度分辨率优于1°K,这同器件的热象测试结果符合得相当好。     

基于信噪比的紫外红外复合告警系统模型

提出一种将红外告警与紫外告警相复合的全新的告警模式。该模式能够在保证探测精度、探测距离的前提下大大降低系统虚警率,提高平台的战场生存能力。参考目前流行的设计方法,针对所提出复合告警模型,我们采用了一种基于信噪比的方法进行了模型的建模,并分析了大气透过率、探测器性能、探测信噪比以及目标背景辐射之间的关系,确立了系统探测距离和所需光学孔径的关系以及系统分辨率和光学系统焦距的关系。经过分析和测试该模型完全满足系统设计的需要,对后续的光学和机械伺服参数的确定起着重要的作用。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.