Synthesis of poly(ethylene glycol)/polypeptide/poly(D,L‐lactide) copolymers and their nanoparticles

Core‐shell structured nanoparticles of poly(ethylene glycol) (PEG)/polypeptide/poly(D ,L ‐lactide) (PLA) copolymers were prepared and their properties were investigated. The copolymers had a poly(L ‐serine) or poly(L ‐phenylalanine) block as a linker between a hydrophilic PEG and a hydrophobic PLA unit. They formed core‐shell structured nanoparticles, where the polypeptide block resided at the interface between a hydrophilic PEG shell and a hydrophobic PLA core. In the synthesis, poly(ethylene glycol)‐b‐poly(L ‐serine) (PEG‐PSER) was prepared by ring opening polymerization of N‐carboxyanhydride of O‐(tert‐butyl)‐L ‐serine and subsequent removal of tert‐butyl groups. Poly(ethylene glycol)‐b‐poly(L ‐phenylalanine) (PEG‐PPA) was obtained by ring opening polymerization of N‐carboxyanhydride of L ‐phenylalanine. Methoxy‐poly(ethylene glycol)‐amine with a MW of 5000 was used as an initiator for both polymerizations. The polymerization of D ,L ‐lactide by initiation with PEG‐PSER and PEG‐PPA produced a comb‐like copolymer, poly(ethylene glycol)‐b‐[poly(L ‐serine)‐g‐poly(D ,L ‐lactide)] (PEG‐PSER‐PLA) and a linear copolymer, poly(ethylene glycol)‐b‐poly(L ‐phenylalanine)‐b‐poly(D ,L ‐lactide) (PEG‐PPA‐PLA), respectively. The nanoparticles obtained from PEG‐PPA‐PLA showed a negative zeta potential value of ?16.6 mV, while those of PEG‐PSER‐PLA exhibited a positive value of about 19.3 mV. In pH 7.0 phosphate buffer solution at 36 °C, the nanoparticles of PEG/polypeptide/PLA copolymers showed much better stability than those of a linear PEG‐PLA copolymer having a comparable molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Selective Adsorption of Functionalized Nanoparticles to Patterned Polymer Brush Surfaces and Its Probing with an Optical Trap

The site‐specific attachment of nanoparticles is of interest for biomaterials or biosensor applications. Polymer brushes can be used to regulate this adsorption, so the conditions for selective adsorption of phosphonate‐functionalized nanoparticles onto micropatterned polymer brushes with different functional groups are optimized. By choosing the strong polyelectrolytes poly(3‐sulfopropyl methacrylate), poly(sulfobetaine methacrylate), and poly[2‐(methacryloyloxy)ethyl trimethylammonium chloride], it is possible to direct the adsorption of nanoparticles to specific regions of the patterned substrates. A pH‐dependent adsorption can be achieved by using the polycarboxylate brush poly(methacrylic acid) (PMAA) as substrate coating. On PMAA brushes, the nanoparticles switch from attachment to the brush regions to attachment to the grooves of a patterned substrate on changing the pH from 3 to 7. In this manner, patterned substrates are realized that assemble nanoparticles in pattern grooves, in polymer brush areas, or substrates that resist the deposition of the nanoparticles. The nanoparticle deposition can be directed in a pH‐dependent manner on a weak polyelectrolyte, or is solely charge‐dependent on strong polyelectrolytes. These results are correlated with surface potential measurements and show that an optical trap is a versatile method to directly probe interactions between nanoparticles and polymer brushes. A model for these interactions is proposed based on the optical trap measurements.     

Molecular Nanoworm with PCL Core and PEO Shell as a Non‐spherical Carrier for Drug Delivery

Core/shell wormlike polymer brushes with densely grafted poly(ϵ‐caprolactone)‐b‐poly(ethylene oxide) (PCL‐b‐PEO) are synthesized via grafting an alkynyl terminated PCL‐b‐PEO (ay‐PCL₁₇‐b‐PEO₁₁₃) onto a well‐defined azido functionalized polymethacrylate (PGA₉₄₀) and are evaluated preliminarily as a single molecular cylindrical vehicle for drug delivery. Water soluble molecular worms of ca. 230 nm are obtained and then the anticancer drug doxorubicin (DOX) is loaded into its PCL core by hydrophobic interaction. Compared with spherical micelles from linear PCL₁₇‐b‐PEO₁₁₃, the brushes demonstrate a lower loading efficiency but a faster release rate of DOX. Confocal laser scanning microscopy measurements show that DOX‐loaded cylindrical molecular brushes can easily enter into HeLa and HepG2 cells in 1 h.     

Synthesis and characterization of polylactide‐PAMAM “Janus‐type” linear‐dendritic hybrids

Herein, we present a facile and comprehensive synthetic methodology for the preparation of polyester‐polyamidoamine (PAMAM) (i.e., polyester: polylactide [PLA] (hydrophobic) and polyamidoamine, PAMAM [hydrophilic]) polymers. A library of PLA‐PAMAM linear dendritic block copolymers (LDBCs) in which both l and d , l polylactide were employed in mass ratios of 30:70, 50:50, 70:30, and 90:10 (PLA:PAMAM) were synthesized and analyzed. When placed in aqueous media, the immiscibility of the hydrophilic and hydrophobic segments leads to nanophase‐segregation exhibited as the formation of aggregates (e.g., vesicles, worms, and/or micelles). By employing both stereochemical configurations of PLA, the differentiation in mass ratios of PLA‐PAMAM aided in elucidating the structure–property relationships of the LDBC system and provided a means toward the control of nanoparticle morphology. Transmission electron microscopy and dynamic light scattering afford the size and shape of the nanoparticles with diameters ranging from 10.6 for low mass ratios to 122.4 nm for high mass ratios of PLA‐PAMAM and positive zeta‐potential values between +24.7 mV and +48.2 mV. Furthermore, small‐angle X‐ray scattering (SAXS) studies were employed to obtain more detailed information on the morphological assemblies constructed via direct dissolution. Such insights provide a pathway toward nanomaterials with unique morphologies and tunable properties deemed relevant in the development of next generation biomaterials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1448–1459     

N‐Boc‐Histidine‐Capped PLGA‐PEG‐PLGA as a Smart Polymer for Drug Delivery Sensitive to Tumor Extracellular pH

A pH‐sensitive polymer was synthesized by introducing the N‐Boc‐histidine to the ends of a PLGA‐PEG‐PLGA block copolymer. The synthesized polymer was confirmed to be biodegradable and biocompatible, well dissolved in water and forming micelles above the CMC. DOX was employed as a model anticancer drug. In vitro drug release from micelles of N‐Boc‐histidine‐capped PLGA‐PEG‐PLGA exhibited significant difference between pH = 6.2 and pH = 7.4, whereas DOX release from micelles composed of un‐capped virgin polymers was not significantly sensitive to medium pH. Uptake of DOX from micelles of the new polymer into MDA‐MB‐435 solid tumor cells was also observed, and pH sensitivity was confirmed. Hence, the N‐Boc‐histidine capped PLGA‐PEG‐PLGA might be a promising material for tumor targeting.

     

Towards Targeted Drug Delivery by Covalent Ligand-Modified Polymeric Nanocontainers

Here we present a novel strategy for specific cellular targeting of polymeric nanocontainers by using self-assembly of block copolymers consisting of either Polydimethoxysiloxane-b-Polymethyloxazoline-b-Polydimethoxysiloxane (PDMS-b-PMOXA-b-PDMS) or functionalized PDMS-b-PMOXA-b-PDMS. Covalent functionalization of the above copolymer was accomplished using either the fluorescent dye sulforhodamine B or a poly-guanosin ligand, the latter by using the Huisgen 1,3-dipolar cycloaddition. The success of the covalent modification of the block copolymer has been determined by studying functionalized sulforhodamine B by NMR and fluorescence correlation spectroscopy. The covalent click chemistry approach leads to efficiently functionalized polymeric nanocontainers which enables specific uptake by activated macrophages overexpressing the scavenger receptor A1.     

New Thiol‐Responsive Mono‐Cleavable Block Copolymer Micelles Labeled with Single Disulfides

Thiol‐responsive symmetric triblock copolymers having single disulfide linkages in the middle blocks (called mono‐cleavable block copolymers, ss‐ABP₂) were synthesized by atom transfer radical polymerization in the presence of a disulfide‐labeled difunctional Br‐initiator. These brush‐like triblock copolymers consist of a hydrophobic polyacrylate block having pendent oligo(propylene oxide) and a hydrophilic polymethacrylate block having pendent oligo(ethylene oxide). Gel permeation chromatography and ¹H NMR results confirmed the synthesis of well‐defined mono‐cleavable block copolymers and revealed that polymerizations were well controlled. Because of amphiphilic nature, these copolymers self‐assembled to form colloidally stable micelles above critical micellar concentration of 0.032 mg · mL⁻¹. In response to reductive reactions, disulfides in thiol‐responsive micelles were cleaved. Atomic force microscopy and dynamic light scattering analysis suggested that the cleavage of disulfides caused dissociation of micelles to smaller‐sized assembled structures in water. Moreover, in a biomedical perspective, the mono‐cleavable block copolymer micelles are not cytotoxic and thus biocompatible.

     

Bioactive,Elastic, and Biodegradable Emulsion Electrospun DegraPol Tube Delivering PDGF‐BB for Tendon Rupture Repair

Healing of tendon ruptures represents a major challenge in musculoskeletal injuries and combinations of biomaterials with biological factors are suggested as viable option for improved healing. The standard approach of repair by conventional suture leads to incomplete healing or rerupture. Here, a new elastic type of DegraPol® (DP), a polyester urethane, is explored as a delivery device for platelet‐derived growth factor—BB (PDGF‐BB) to promote tendon healing. Using emulsion electrospinning as an easy method for incorporation of biomolecules within polymers, DegraPol® supports loading and release of PDGF‐BB. Morphological, mechanical and delivery device properties of the bioactive DP scaffolds, as well as differences arising due to different electrospinning parameters are studied. Emulsion electrospun DP scaffolds result in thinner fibers than pure DP scaffolds and experience decreased strain at break [%], but high enough for successful surgeon handling. PDGF‐BB is released in a sustained manner from emulsion electrospun DP, but not completely, with still large amount of it being inside the polymeric fibers after 30 d. In vitro studies show that the bioactive scaffolds promote tenocyte proliferation in serum free and serum⁺ conditions, demonstrating the potential of this surgeon‐friendly bioactive delivery device to be used for tendon repair.

     

Water Soluble Star‐block Copolypeptides: Towards Biodegradable Nanocarriers for Versatile and Simultaneous Encapsulation

The synthesis of water soluble star‐block copolypeptides and their encapsulation properties are described. The star‐block copolypeptides, obtained by ring‐opening polymerization of amino acid N‐carboxyanhydrides, consist of a PEI core, a hydrophobic polyphenylalanine or polyleucine inner shell, and a negatively charged polyglutamate outer shell. The encapsulation study showed that these water soluble, amphiphilic star‐block copolypeptides could simultaneously encapsulate versatile compounds ranging from hydrophobic to anionic and cationic hydrophilic guest molecules.

     

Sustained and Extended Release with Structural and Activity Recovery of Lysozyme from Complexes with Sodium (Sulfamate Carboxylate) Isoprene/Ethylene Oxide Block Copolymer

The complexation of lysozyme and sodium (sulfamate carboxylate) isoprene/ethylene oxide (SCIEO) at pH = 7.4 and the release of lysozyme from the complexes in the presence of NaCl were investigated. Through electrostatic and hydrophobic interactions, lysozyme and SCIEO form stable complex nanoparticles. The complexation partially disturbs the structure of lysozyme. Some of the hydrophobic residues of lysozyme are exposed to bind with SCIEO. The complexation leads to loss of most of the lysozyme activity. In the presence of NaCl, lysozyme can be released from the complexes. The released lysozyme molecules recover their native structure and activity completely. In the condition of physiological pH and ionic strength, a sustained and extended release of lysozyme was achieved.

     

Micelles from amphiphilic block copolyphosphates for drug delivery

Amphiphilic block copolyphosphates (PEP-b-PIPPs) are synthesized by two-step ROP of cyclic phosphate monomers with different pedant groups. They can spontaneously self-assemble into approximately spherical micelles ranging in size between 89 and 198 nm in water. A typical hydrophobic anti-cancer drug DOX is encapsulated into the micelles. The release rate of DOX slows down with increasing hydrophobic block length of PIPP. DOX-loaded micelles are investigated for the proliferation inhibition of Hela cells and the DOX dose required for 50% cellular growth inhibition is found to be 0.8 μg mL(-1). It is demonstrated that PEP-b-PIPP micelles can be used as a safe and promising drug delivery system.     

经两亲嵌段共聚物自组装制备纳米胶束

本文介绍两亲嵌段共聚物的合成,综述了经两亲嵌段共聚物自组装制备纳米胶束的研究进展,并对该领域的发展趋势进行了展望。     

Dendritic Polyglycerol‐Derived Nano‐Architectures as Delivery Platforms of Gemcitabine for Pancreatic Cancer

Dendritic polyglycerol‐co‐polycaprolactone (PG‐co‐PCL)‐derived block copolymers are synthesized and explored as nanoscale drug delivery platforms for a chemotherapeutic agent, gemcitabine (GEM), which is the cornerstone of therapy for pancreatic ductal adenocarcinoma (PDAC). Current treatment strategies with GEM result in suboptimal therapeutic outcome owing to microenvironmental resistance and rapid metabolic degradation of GEM. To address these challenges, physicochemical and cell‐biological properties of both covalently conjugated and non‐covalently stabilized variants of GEM‐containing PG‐co‐PCL architectures have been evaluated. Self‐assembly behavior, drug loading and release capacity, cytotoxicity, and cellular uptake properties of these constructs in monolayer and in spheroid cultures of PDAC cells are investigated. To realize the covalently conjugated carrier systems, GEM, in conjunction with a tertiary amine, is attached to the polycarbonate block grafted from the PG‐co‐PCL core. It is observed that pH‐dependent ionization properties of these amine side‐chains direct the formation of self‐assembly of block copolymers in the form of nanoparticles. For non‐covalent encapsulation, a facile “solvent‐shifting” technique is adopted. Fabrication techniques are found to control colloidal and cellular properties of GEM‐loaded nanoconstructs. The feasibility and potential of these newly developed architectures for designing carrier systems for GEM to achieve augmented prognosis for pancreatic cancer are reported.     

Biodegradable amphiphilic block copolymers containing functionalized PEO blocks:Controlled synthesis and biomedical potentials

A series of controllable amphiphilic block copolymers composed of poly(ethylene oxide)(PEO) as the hydrophilic block and poly(ε-caprolactone)(PCL) as the hydrophobic block with the amino terminal group at the end of the PEO chain(PCL-b-PEO-NH2) were synthesized.Based on the further reaction of reactive amino groups,diblock copolymers with functional carboxyl groups(PCL-b-PEO-COOH) and functional compounds RGD(PCL-b-PEO-RGD) as well as the triblock copolymers with thermosensitive PNIPAAm blocks(PCL-b-PEO-b-P...     

注射用生物可降解胰岛素纳米微球的制备

共聚物;药剂释放体系;注射用生物可降解胰岛素纳米微球的制备     

Synthesis and Self‐Assembly of Thermoresponsive Amphiphilic Biodegradable Polypeptide/Poly(ethyl ethylene phosphate) Block Copolymers

We report the design and synthesis of new fully biodegradable thermoresponsive amphiphilic poly(γ‐benzyl L ‐glutamate)/poly(ethyl ethylene phosphate) (PBLG‐b‐PEEP) block copolymers by ring‐opening polymerization of N‐carboxy‐γ‐benzyl L ‐glutamate anhydride (BLG? NCA) with amine‐terminated poly(ethyl ethylene phosphate) (H₂N? PEEP) as a macroinitiator. The fluorescence technique demonstrated that the block copolymers could form micelles composed of a hydrophobic core and a hydrophilic shell in aqueous solution. The morphology of the micelles as determined by transmission electron microscopy (TEM) was spherical. The size and critical micelle concentration (CMC) values of the micelles showed a decreasing trend as the PBLG segment increased. However, UV/Vis measurements showed that these block copolymers exhibited a reproducible temperature‐responsive behavior with a lower critical solution temperature (LCST) that could be tuned by the block composition and the concentration.