A study on the role of BaTiO<Subscript>3</Subscript> in lithum bis(perfluoroethanesulfonyl)imide-based PVDF-HFP nanocomposites

Lithium bis(perfluoroethanesulfonyl)imide (BETI; guest species)-based polyvinylidenefluoride-hexafluoropropylene (PVDF-HFP) (host matrix) polymer nanocomposites (PNC) films by loading barium titanate (BaTiO₃) as a filler in ascending proportions with plasticizer (mixture of EC + DMC) while keeping host and guest content as constants has been investigated by employing AC impedance, thermal, X-ray diffraction (XRD), phase morphology, and Fourier transform infrared (FTIR) studies. The ionic conductivity measurements on these PNC show that 2.5% BaTiO₃-loaded polymer nanocomposites (PNC) showed mitigation in magnitude of the conductivity compared with that of 0 wt.% loaded PNC; but increase in conductivity is noted thereafter with increase in filler content of up to 7.5 wt.%. The higher conductivity is observed for 7.5% filler-loaded membrane. The XRD study identifies suppression of polymer phase associated with (200) plane. The SEM image illustrates inhomogeneity in surface morphologies for PNCs with the filler dispersed. The thermal profile registers the endothermic changes associated with polymer host indicating a varying heat of fusion ∆Hm with filler increase. FTIR studies confirm possible interaction between various constituents of the PNCs.     

Effect of nanofillers on thermal and transport properties of potassium iodide–polyethylene oxide solid polymer electrolyte

In order to enhance the ionic conductivity of polyethylene oxide (PEO)–KI(80:20) based alkaline polymer electrolytes, nanosized inorganic filler ZnS has been incorporated into PEO–KI matrix and the corresponding nanocomposite polymer electrolytes are synthesized by the usual solution casting procedure. Atomic force microscope image of composite polymer electrolyte exhibits that the introduction of ZnS nanoparticles changes the surface morphology and aggregates them to form an arborization pattern. The prepared nanocomposite polymer electrolyte reveals an ionic conductivity of about 10^?4 S cm^?1 for 5 wt% ZnS at room temperature.     

Synthesis and characterization of proton-conducting polymer electrolyte based on polyacrylonitrile (PAN)

Solid polymer electrolytes based on polyacrylonitrile (PAN) doped with ammonium iodide (NH₄I) have been prepared by solution casting method with different molar ratios of polymer and salt using DMF as solvent. The XRD pattern confirms the dissociation of salt. The FTIR analysis confirms the complex formation between the polymer and the salt. A shift in glass transition temperature (T _g ) of the PAN/NH₄I electrolytes has been observed from the DSC thermograms, which indicates the interaction between the polymer and the salt. The conductivity analysis shows that the polymer electrolyte with 20 mol% NH₄I has the highest conductivity equal to 1.106 × 10⁻³ S cm⁻¹ at room temperature. The activation energy (E _a ) has been found to be low for the highest conductivity sample. The dielectric permittivity (ε*) and modulus (M*) have been calculated from the alternating current (AC) impedance spectroscopy in the frequency range 42 Hz–1 MHz. The DC polarization measurement shows that the conductivity is mainly due to ions.

     

Ultrasound-assisted facile one-pot synthesis of ternary MWCNT/MnO2/rGO nanocomposite for high performance supercapacitors with commercial-level mass loadings

Commercial application of supercapacitors (SCs) requires high mass loading electrodes simultaneously with high energy density and long cycle life. Herein, we have reported a ternary multi-walled carbon nanotube (MWCNT)/MnO₂/reduced graphene oxide (rGO) nanocomposite for SCs with commercial-level mass loadings. The ternary nanocomposite was synthesized using a facile ultrasound-assisted one-pot method. The symmetric SC fabricated with ternary MWCNT/MnO₂/rGO nanocomposite demonstrated marked enhancement in capacitive performance as compared to those with binary nanocomposites (MnO₂/rGO and MnO₂/MWCNT). The synergistic effect from simultaneous growth of MnO₂ on the graphene and MWCNTs under ultrasonic irradiation resulted in the formation of a porous ternary structure with efficient ion diffusion channels and high electrochemically active surface area. The symmetric SC with commercial-level mass loading electrodes (∼12 mg cm⁻²) offered a high specific capacitance (314.6 F g⁻¹) and energy density (21.1 W h kg⁻¹ at 150 W kg⁻¹) at a wide operating voltage of 1.5 V. Moreover, the SC exhibits no loss of capacitance after 5000 charge−discharge cycles showcasing excellent cycle life.     

Effect of ZnO nanoparticles filler concentration on the properties of PEO-ENR50-LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript> solid polymeric electrolyte

A solid polymer electrolyte comprising blend of poly(ethylene oxide) and 50% epoxidized natural rubber (ENR50) as a polymer host, LiCF₃SO₃ as a salt and nanoparticle ZnO as an inorganic filler was prepared by solution-casting technique. The effect of filler on the electrolyte properties was characterized and analysed. FESEM analysis showed that the filler was well distributed in the polymer matrix, while the effective interaction between the salt and the polymer host was reduced by the addition of filler. As evidenced by FTIR analysis, which showed the formation of triplet peak at C-O-C stretching region. Ionic conductivity was found to decrease from 1.4 × 10⁻⁴ Scm⁻¹ to 2.5 × 10⁻⁶ Scm⁻¹ upon the addition of filler, due to the blocking effect of filler into the electrolyte conduction pathways. The temperature dependence on the electrolyte conductivity obeys Arrhenius rule in two temperature regions.     

AC conductivity and relaxation behavior in ion conducting polymer nanocomposite

We report the ac conductivity and relaxation behavior analysis for a heterogeneous polymer–clay nanocomposite (PNC) having composition (polyacrylonitrile)₈LiCF₃SO₃ + x wt.% dodecylamine modified montmorillonite. Charge transport behavior in an ionically conducting PNC has been analyzed systematically and correlated with the macroscopic parameters like polymer glass transition temperature and available free mobile charge carriers. Intercalation of cation coordinated polymer into the nanometric clay channels has been confirmed by high-resolution transmission electron microscopy. The electrical properties of the intercalated PNC films have been studied using complex impedance/admittance spectroscopy. Excellent correlation of relaxation behavior with polymer glass transition temperature (T _g) confirmed the objectives of the work. An analysis of dielectric relaxation indicates that PNC films are lossy when compared with polymer–salt film. This result is a direct outcome of faster ion dynamics leading to strong electrode polarization effect due to the accumulation of charge carriers at the interface.     

Effect of plasticizer on structural and electrical properties of nanocomposite solid polymer electrolytes

The solid polymer electrolyte films based on polyethylene oxide, NaClO₄ with dodecyl amine modified montmorillonite as filler, and polyethylene glycol as plasticizer were prepared by a tape casting method. The effect of plasticization on structural, microstructural, and electrical properties of the materials has been investigated. A systematic change in the structural and microstructural properties of plasticized polymer nanocomposite electrolytes (PPNCEs) on addition of plasticizer was observed in our X-ray diffraction pattern and scanning electron microscopy micrographs. Complex impedance analysis technique was used to calculate the electrical properties of the nanocomposites. Addition of plasticizer has resulted in the lowering of the glass transition temperature, effective dissociation of the salt, and enhancement in the electrical conductivity. The maximum value of conductivity obtained was ∼4.4 × 10⁻⁶ S cm⁻¹ (on addition of ∼20% plasticizer), which is an order of magnitude higher than that of pure polymer nanocomposite electrolyte films (2.82 × 10⁻⁷ S cm⁻¹). The enhancement in conductivity on plasticization was well correlated with the change in other physical properties.     

Ionic conduction behavior in PVC–PEG blend polymer electrolytes upon the addition of TiO2

The blend-based polymer electrolyte consisting of poly (vinyl chloride) (PVC) and poly (ethylene glycol) (PEG) as host polymers and lithium perchlorate (LiClO₄) as the complexing salt was studied. An attempt was made to investigate the effect of TiO₂ concentration in the unplasticized PVC–PEG polymer electrolyte system. The XRD and FTIR studies confirm the formation of a polymer–salt complex. The conductivity results indicate that the incorporation of ceramic filler up to a certain concentration (15 wt.%) increases the ionic conductivity and upon further addition the conductivity decreases. The maximum ionic conductivity 0.012 × 10⁻⁴ S cm⁻¹ is obtained for PVC–PEG–LiClO₄–TiO₂ (75–25–5–15) system. Thermal stability of the polymer electrolyte is ascertained from TG/DTA studies.     

Synthesis and ionic conductivity of polymeric ion gel containing room temperature ionic liquid and phosphotungstic acid

Composite electrolyte comprising phosphotungstic acid (PWA) filler and 1-butyl-3-methyl-imidazolium-tetrafluoroborate (BMImBF₄) room temperature ionic liquid (RTIL) in poly(2-hydroxyethyl methacrylate) (PHEMA) matrix has been prepared. The polymer matrix was formed by free radical polymerization of 2-hydroxyethyl methacrylate (HEMA) monomers. BMImBF₄ was used as both ionic source and plasticizer, and PWA filler provided the proton conductivity in this system. The interactions and structure changes of the PHEMA-RTIL-PWA composites were investigated by Fourier transform infrared spectra, differential scanning calorimetry, and X-ray diffraction. PWA fillers maintained their Keggin structure within a limited range and enhanced the ionic conductivity of the composite electrolyte. The electrolyte with PWA at the 2 wt.% showed the highest ionic conductivity of 8 × 10^− 4 S cm^− 1 at room temperature and 96% relative humidity.     

Plastic separators with improved properties for portable power device applications

We report a novel clay-intercalated polymer nanocomposites (PNC) having very high ionic conductivity (~10^?3 S cm^?1) and improved stability properties. The suitability of the PNC films for subsequent use as a separator component in energy storage devices has been explored in terms of desirable voltage (~4.3 V), thermal (~290 °C) and mechanical (~55 MPa) stability, and ion transport (t _ion, ~0.99) properties. Intercalation of (polyacrylonitrile (PAN)₈LiPF₆ complex into nanometric channels of organophilic clay has been confirmed by X-ray diffraction analysis. These observations agree well with transmission electron microscopy results. Impedance spectroscopy indicated bulk electrical conduction in the high-frequency region followed by electrode polarization effects at lower frequencies. The latter effect is clearly noticed in the admittance plots. Estimated value of ionic conductivity and stability is invariably higher in PNCs compared with clay-free polymer–salt complex film. The feasibility of ionic conduction in the PNC separators has been explained in terms of hopping mechanism. The optimized PNC film may be expected to serve the dual purpose of electrolyte as well as separator in portable energy storage/conversion devices.     

Combined effect of nanochitosan and succinonitrile on structural, mechanical, thermal, and electrochemical properties of plasticized nanocomposite polymer electrolytes (PNCPE) for lithium batteries

A sequence of novel plasticized polymer nanocomposite electrolyte systems based on polyethylene oxide (PEO) as polymer host, LiCF₃SO₃ as salt, and a variety of concentrations of nanochitosan as inert filler, succinonitrile as a solid non-ionic plasticizer has been prepared. The prepared membranes were subjected to X-ray diffraction, FT-IR, tensile strength, morphological studies, thermal analysis, AC ionic conductivity measurement, and interfacial analyses. The combined effect of succinonitrile and nanochitosan on the electrochemical properties of polymer electrolytes has been studied, and it was confirmed that the ionic conductivity is significantly increased. The maximum ionic conductivity of the plasticized nanocomposite polymer electrolytes are found to be in the range of 10^?2.8?S/cm. Besides, the interfacial stability also shows a significant improvement. The tensile measurement and thermal analysis results illustrate that the electrolytes based on that polymer host possess good mechanical and thermal stabilities.     

A study on LiBOB-based nanocomposite gel polymer electrolytes (NCGPE) for Lithium-ion batteries

Lithium bis(oxalato)borate (LiBOB) salt-based nanocomposite gel polymer blend electrolyte (PVdF/PVC) membranes have been prepared by solution casting technique for various concentrations of TiO₂. The effect of anatase structure of nanosized titanium dioxide in the plasticized PVC/PVdF + LiBOB matrix has been observed in the 2:1 salt filler ratio in the impedance measurements that the conductivity is increased one order of magnitude higher than the filler-free electrolyte (1:0 salt:filler ratio). The phase morphology of this electrolyte membrane represents the appearance of the free volume sites for ionic migration.     

Crown ether enhancement of ionic conductivity in a polymer-salt system

Crown ethers are a class of organic compounds that form complexes with inorganic cations. When crown ethers are added to poly (vinylene carbonate) containing dissolved lithium salt, ionic charge transport in the solid electrolyte is assisted. The ionic conductivity of the polymer containing 12-crown-4 is three orders of magnitude greater than the conductivity in the polymer without crown ether. The conductivity of this system at room temperature is approximately 2.5×10⁻⁴ S cm⁻¹, higher than any polymer-lithium salt system yet reported. The effects of various crown compounds as well as their concentration effects are examined.     

多壁碳纳米管/聚丙烯复合材料热导率研究

用Pt细丝代替已有3ω方法中的薄膜热线,并设计了基于Labview程序的虚拟测量系统,准确、方便地测量了聚丙烯复合材料的热导率. 测量结果发现,多壁碳纳米管/丁苯橡胶/聚丙烯三元复合材料的热导率随着多壁碳纳米管/丁苯橡胶粉末含量的增加变化不大;多壁碳纳米管/聚丙烯复合材料的热导率随着多壁碳纳米管含量增加而增大;复合材料热导率远小于简单混合规则预测的结果,而与有效介质理论符合很好. 关键词： ω法')" href="#">3ω法 多壁碳纳米管 聚丙烯复合材料 热导率     

Proton-conducting polymer electrolyte based on PVA-PAN blend doped with ammonium thiocyanate

Blending of polymers is one of the most useful methods for modulating the conductivity of solid polymer electrolytes. Blend polymer electrolytes have been prepared with polyvinyl alcohol (PVA)-polyacrylonitrile (PAN) blend doped with ammonium thiocyanate with different concentrations by solution casting technique, using dimethyl formamide (DMF) as the solvent. The prepared electrolytes are characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), nuclear magnetic resonance (NMR), ultraviolet (UV), and ac impedance measurement techniques. The increase in amorphous nature of the blend polymer electrolyte by the addition of salt is confirmed by XRD analysis. The complex formation between the polymers and the salt has been confirmed by FTIR analysis. The thermal behavior has been examined using DSC and TGA. The maximum conductivity has been found to be 2.4?×?10^?3 S cm^?1 for 92.5PVA/7.5PAN/25 % NH₄SCN sample at room temperature. The temperature dependence of conductivity has been studied with the help of Arrhenius plot, and the activation energies are calculated. The proton conductivity is confirmed by dc polarization measurement technique. ¹H NMR studies reveal the presence of protons in the sample. A proton battery is constructed with the highest conducting sample, and its open circuit voltage is measured to be 1.2 V     

Electrical Impedance Spectroscopic Study of CNT/Ethylene-alt-CO/Propylene-alt-CO Polyketones Nanocomposite

Impedance spectroscopy was utilized to investigate the dielectric properties, ac conductivity and charge transport mechanisms in propylene-alt-CO/ethylene-alt-CO (EPEC) random terpolymer filled with multi-walled carbon nanotubes (MWCNT) as a function of nanofiller content, frequency, and temperature. Equivalent resistor-capacitor (RC) circuit models were proposed to describe the impedance characteristics of the unfilled terpolymer and the nanocomposite at different temperatures. For the nanocomposites, the ac conductivity tended to be frequency independent at low frequencies. At high frequencies, the ac conductivity increased with frequency. The dc conductivity (i.e., plateau of the ac conductivity at low frequencies) at room temperature increased from 10^?9 (Ω·m)^?1 for the unfilled polymer to l0^?3 (Ω·m)^?1 for the 6 wt% MWCNT/EPEC nanocomposite. At low temperatures, the equivalent RC model for EPEC-0 and EPEC-2 was found to consist of a parallel RC circuit. However, for 6 wt% MWCNT/EPEC nanocomposite, an RC model consisting of an R/constant phase element (CPE) circuit and a resistor in series was required to describe the impedance behavior of the nanocomposite.     

Proton-conducting biopolymer electrolytes based on pectin doped with NH4X (X=Cl,Br)

Research has been undertaken to develop polymer electrolytes based on biodegradable natural polymers such as cellulose acetate, starch, gelatin, and chitosan, which are being used as polymer hosts for obtaining new polymer electrolytes for their applications in various electrochemical devices such as batteries, sensors, and electrochromic windows. Pectin is a naturally available material which is extracted from the skin of citrus fruits. Pectins, also known as pectic polysaccharides, are rich in galacturonic acid. The present study focuses on the proton-conducting polymer electrolytes based on the biopolymer pectin doped with ammonium chloride (NH₄Cl) and ammonium bromide (NH₄Br) prepared by solution casting technique. The prepared membranes are characterized using XRD, FTIR, and AC impedance techniques to study their complexation behavior, amorphous nature, and electrical properties. The conductivity of pure pectin membrane has been found to be 9.41 × 10⁻⁷ S cm⁻¹. The polymer systems with 30 mol% NH₄Cl-doped pectin and 40 mol% NH₄Br-doped pectin have been found to have maximum ionic conductivity of 4.52 × 10⁻⁴ and 1.07 × 10⁻³ S cm⁻¹, respectively. The conductivity value has increased by three orders of magnitude compared to pure pectin membrane. The dielectric behavior of both the systems has been explained using dielectric permittivity and electric modulus spectra.

     

Effects of MnO<Subscript>2</Subscript> nano-particles on the conductivity of PMMA-PEO-LiClO<Subscript>4</Subscript>-EC polymer electrolytes

Li-ion rechargeable batteries based on polymer electrolytes are of great interest for solid state electrochemical devices nowadays. Many studies have been carried out to improve the ionic conductivity of polymer electrolytes, which include polymer blending, incorporating plasticizers and filler additives in the electrolyte systems. This paper describes the effects of incorporating nano-sized MnO₂ filler on the ionic conductivity enhancement of a plasticized polymer blend PMMA–PEO–LiClO₄–EC electrolyte system. The maximum conductivity achieved is within the range of 10⁻³ S cm⁻¹ by optimizing the composition of the polymers, salts, plasticizer, and filler. The temperature dependence of the polymer conductivity obeys the VTF relationship. DSC and XRD studies are carried out to clarify the complex formation between the polymers, salts, and plasticizer.     

FTIR and conductivity studies of PVC based polymer electrolyte systems

Poly (vinylchloride) (PVC)-LiBF₄ polymer electrolytes plasticized with DBP in different mole ratios have been studied by FTIR and Impedance Spectroscopic techniques. The complexation has been confirmed from FTIR studies. The maximum room temperature conductivity (2.1·.10⁻⁷ S·.cm⁻¹) has been observed for PVC-LiBF₄-DBP (10-5-85 mole%) complex. The temperature dependence of the conductivity of the polymer films seems to obey the VTF relation. The conductivity values are presented and the results are discussed.     

Conductivity and thermal studies of blend polymer electrolytes based on PVAc–PMMA

The polymer electrolytes comprising blend of poly(vinyl acetate) (PVAc) and poly(methylmethacrylate) (PMMA) as a host polymer and LiClO₄ as a dopant are prepared by solution casting technique. The amorphous nature of the polymer–salt complex has been confirmed by XRD analysis. The DSC thermograms show two T_g's for PVAc–PMMA blend. A decrease in T_g with the LiClO₄ content reveals the increase of segmental motion. Conductance spectra results are found to obey the Jonscher's power law and the maximum dc conductivity value is found to be 1.76 × 10^− 3 S cm^− 1 at 303 K for the blend polymer complex with 20 wt.% LiClO₄, which is suitable for the Li rechargeable batteries. The conductivity–temperature plots are found to follow an Arrhenius nature. The dc conductivity is found to increase with increase of salt concentration in the blend polymer complexes.