PMAA纳米水凝胶的水相制备

利用表面活性剂间的疏水作用以及表面活性剂与单体间的氢键作用,促使甲基丙烯酸(MAA)单体在原位生成的聚甲基丙烯酸甲酯(PMMA)种子乳胶表面的选择性聚合,实现了PMAA纳米水凝胶的水相"绿色"制备。利用动态光散射、傅里叶红外光谱、透射电子显微镜表征了PMAA纳米水凝胶的尺寸、组成、形貌和pH响应性。研究了聚氧乙烯失水山梨醇单月桂酸酯(吐温20)的用量、N,N’-亚甲基双丙烯酰胺(MBA)的用量、MAA的用量和加入方式、十二烷基硫酸钠(SDS)的补加速率等对PMAA纳米水凝胶的尺寸和溶胀性能的影响。结果表明:PMAA纳米水凝胶为核-壳结构;随着MBA用量的减小、吐温20用量的增加、MAA用量的增加,PMAA纳米水凝胶的尺寸和溶胀比均增大;当采用半连续加入MAA时,PMAA纳米水凝胶的尺寸和溶胀比变小;当SDS的补加时间由60min延长到100min时,PMAA纳米水凝胶的尺寸逐渐变小。PMAA纳米水凝胶具有良好的pH响应性,当介质的pH从1增加到6时,其流体力学体积扩张了64倍。     

聚甲基丙烯酸纳米水凝胶的水相合成及其磁性功能化

利用十二烷基硫酸钠/吐温20复配表面活性剂和原位生成的聚甲基丙烯酸甲酯(PMMA)种子乳胶,发展了一种可在全水相中"绿色"合成较高浓度的聚甲基丙烯酸(PMAA)纳米水凝胶的新方法.以PMAA纳米水凝胶为前驱体,采用原位氧化沉淀法制备了磁性PMAA纳米微球.利用动态光散射法、FTIR分析、TEM观察、振动样品磁强计测试(VSM)、热重分析(TG)等对纳米水凝胶和磁性微球进行了表征,并探讨了PMAA纳米水凝胶的形成机理.结果表明,吐温20与MAA和PMAA间的氢键作用,促成了交联PMAA/吐温20复合物层在PMMA种子乳胶表面的选择性生长,导致生成了具有核壳结构的PMAA纳米水凝胶.PMAA纳米水凝胶表现出良好的p H响应性,当介质的p H值由1增加至6时,其流体力学体积扩张了近50倍.磁性PMAA纳米微球具有超顺磁性,其饱和磁化强度高达50 A·m~2/kg.     

新型核壳结构水凝胶的合成与表征

以羟丙基纤维素为模板,在水溶液中合成了不含表面活性剂的聚甲基丙烯酸（PMAA）纳米水凝胶。再以该PMAA纳米水凝胶为模板,合成了具有pH和温度双重敏感的聚甲基丙烯酸/聚N-异丙基丙烯酰胺（PMAA-PNIPA）核壳结构纳米水凝胶。对纳米水凝胶的形态、结构、pH以及温度敏感性的表征结果表明,纳米水凝胶粒径为338.8～407.9 nm,并随交联剂用量的增加而减小,其体积相转变具有良好的pH及温度响应性,这种绿色合成的生物相容性新型核壳结构纳米水凝胶具有极为广泛的应用前景。     

P(MAA-co-AM)纳米水凝胶的制备与表征

利用单体对之间的氢键特殊相互作用,采用一步反应在水相中共聚甲基丙烯酸(MAA)、丙烯酰胺(AM)和交联剂乙二醇二甲基丙烯酸酯(EGDMA),制备了pH响应性共聚物P(MAAco-AM)纳米水凝胶。采用纳米粒度与电位分析仪、傅里叶红外光谱仪、透射电子显微镜、场发射扫描电镜等对P(MAA-co-AM)纳米水凝胶的尺寸、形貌、组成和结构进行了表征。系统研究了反应参数对P(MAA-co-AM)纳米水凝胶的影响。结果表明:当两单体等物质的量投料时所制备的P(MAA-co-AM)纳米水凝胶粒径分布最窄(〈Dh〉=129nm,PDI=0.095),且其粒径随着两单体用量的增加而增大。随着单体加入时间的延长或EGDMA用量的增加,P(MAA-co-AM)纳米水凝胶的粒径逐渐变小。P(MAA-co-AM)纳米水凝胶表现出极好的pH响应性:当介质的pH从4增加到8时,溶胀比高达7,体积扩张了343倍。     

模板聚合法制备高浓度PMAA/HEC核-壳聚合物纳米微球

以羟乙基纤维素(HEC)为大分子模板,选用甲基丙烯酸(MAA)单体,通过模板聚合一步反应,制备了较高浓度(40 mg/mL)的核-壳结构聚合物纳米微球溶液。采用透射电镜、红外光谱、粒径-电位和荧光光谱等分析方法,研究了PMAA/HEC纳米微球的形态、结构、原位形成机理和pH响应特性。结果表明:在大分子间氢键作用的驱动下,原位生成的PMAA和HEC自组装形成了以不溶性的PMAA/HEC大分子复合物为核、以可溶性HEC为壳的PMAA/HEC聚合物纳米微球。微球在pH=0.7~4.0范围内表现出较明显的pH敏感性。     

pH响应性表面对蛋白质吸附的调控

通过表面引发原子转移自由基聚合在固定了引发剂的硅表面接枝了聚甲基丙烯酸叔丁酯(PtBMA),而后通过水解得到聚甲基丙烯酸(PMAA)聚合物刷.通过X射线光电子能谱、椭圆偏振仪和水接触角测试证明了接枝改性的成功.研究发现PMAA改性表面的浸润性和对蛋白质的吸附行为都具有一定的pH响应性.在较低pH值时改性表面相对疏水,随...     

快速pH响应丝胶/聚甲基丙烯酸互穿网络水凝胶的合成及表征

采用同步互穿网络方法制备丝胶蛋白(SS)/聚甲基丙烯酸(PMAA)为组分的互穿网络(IPN)水凝胶. 研究了互穿网络水凝胶对介质pH的刺激响应性能. 结果表明, IPN水凝胶具有强烈的pH刺激响应性能. 在pH=9.2的缓冲溶液中, -COOH解离成 -COO^-, 渗透压与网络之间的静电排斥作用导致IPN的溶胀度增大; 当pH减小时, 溶胀度随之减小. IPN水凝胶具有快速退溶胀速率及可逆溶胀-收缩性能.     

聚甲基丙烯酸单层修饰金纳米粒子的制备及pH响应性催化

采用可逆加成断裂链转移(RAFT)聚合制备了具有硫醇端基的聚甲基丙烯酸叔丁酯(PtBMA),通过其水解得到具有pH刺激响应的聚甲基丙烯酸(PMAA)。利用硫醇端基与金之间的强耦合作用获得了聚甲基丙烯酸单层修饰的金纳米粒子(PMAA-GNPs)催化体系。利用UV-Vis光谱和透射电子显微镜(TEM)研究了PMAA-GNPs催化剂在不同pH值下的分散状态。以NaBH4还原对硝基苯酚的反应,验证了此催化体系的pH响应性。结果表明,调节体系的pH值为酸性,PMAA塌缩和包覆在金纳米粒子(GNPs)的表面,引起GNPs的聚集,从而降低了催化效率。反之,在碱性环境中,在PMAA链的排斥作用下,GNPs能较好的分散,提高催化效率。     

聚甲基丙烯酸单层保护金纳米粒子的制备及pH响应性聚集

通过可逆断裂链转移加成聚合,制备了单分散的聚甲基丙烯酸叔丁酯,并一步水解获得了具有硫醇端基的聚甲基丙烯酸(PMAA).在还原氯金酸为金纳米粒子的同时,利用硫醇端基与金纳米粒子(GNPs)的耦合作用,一步获得了聚甲基丙烯酸单层保护的金纳米粒子.通过紫外光谱和透射电镜表征证实,金纳米粒子为单分散的球型颗粒,在水溶液中具有长期稳定性.聚甲基丙烯酸单层保护的金纳米粒子的光学性质和聚集状态,具有明显的pH响应性.在酸性条件下,由于PMAA被质子化发生疏水性转变,聚合物链收缩聚集,促使金纳米粒子之间互相靠近并聚集,其表面等离子共振吸收峰发生红移.从酸性调节为碱性后,(PMAA-@-GNPs)能重新分散,吸收峰发生蓝移.在多次循环后,溶液的光学信号能可逆互变且变化不大.     

羧基氟碳共聚物纤维光催化剂载体的制备与耐光降解

通过溶液聚合法合成了聚(丙烯酸六氟丁酯-co-甲基丙烯酸)(P(HFBA-co-MAA))和聚(甲基丙烯酸十二氟庚酯-co-甲基丙烯酸)(P(DFHMA-co-MAA))羧基氟碳共聚物. 静电纺丝实验结果表明,随着 MAA 用量的减少,两种氟碳共聚物的可纺性逐渐变差,相应的纺丝液的浓度也逐渐降低,所用溶剂的极性和沸点呈现降低的趋势;当配制纺丝液所用低沸点溶剂丁酮用量增大时,所得纤维的直径呈增加趋势;P(DFHMA-co-MAA) 的可纺性优于 P(HFBA-co-MAA). 采用两步法在 P(DFHMA-co-MAA)共聚物纤维表面制备光催化剂 ZnS,XPS 结果表明锌离子先与共聚物纤维表面的羧酸根离子络合,然后络合的锌离子再与硫源 TAA 反应形成 ZnS. MAA 用量高的共聚物纤维表面形成的 ZnS 量与粒子尺寸较大,MAA 用量为 10 wt% 时,共聚物纤维表面形成了纳米级的 ZnS 粒子,通过紫外降解实验和红外分析表明制备的 ZnS/P(DFHMA-co-MAA)纤维复合物具有很好的耐紫外光降解性能.     

化“材”为“筑”

Chemistry is a central, practical and creative discipline. The development of chemistry plays an important role in the progress of science and society, as well as the improvement of the quality of human life. This paper introduces the chemical knowledge of stone, concrete, glass and other inorganic nonmetallic building materials by the anthropomorphically story. Taking nanomaterials as an example, the prospect of building materials development in the future is put forward.     

"Alpha"-, "beta"- and "delta"-anhydrodigitoxigenin

The syntheses of 3β-hydroxy-5β-carda-14, 20:22-dienolide (= «β»-anhydro-), 3β-hydroxy-5β-carda-8:14, 20:22-dienolide (= «α»-anhydro-) and «δ»-anhydro-digitoxigenin (= probably 3β-hydroxy-5β, 14β-carda-8, 20:22-dienolide) by the best ways known to date, have been described. «δ»-Anhydro-digitoxigenin represents the thermodynamically most stable isomer. In this isomer the double bond in position 8 is unaffected by hydrogenation with Pt in acetic acid; with perbenzoic acid an epoxide results from which, on hydrogenation, the double bond can be regenerated in its original position. Analogous reactions are known to occur in the 8:14-epoxides.     

Making "wheels" and "cubes" from triangles

[Mn(IV)Mn(II)3] triangular units directed by the presence of tripodal alcohols self-assemble in the presence of azide and acetate ligands to form either a [Mn24] "wheel" or a [Mn32] "cube".     

"Turn-on" fluorescent sensing with "reactive" probes

Chemical probes are valuable tools for the investigation of biochemical processes, diagnosis of disease markers, detection of hazardous compounds, and other purposes. Therefore, the development of chemical probes continues to grow through various approaches with different disciplines and design strategies. Fluorescent probes have received much attention because they are sensitive and easy-to-operate, in general. To realize desired selectivity toward a given analyte, the recognition site of a fluorescent probe is designed in such a way to maximize the binding interactions, usually through weak molecular forces such as hydrogen bonding, toward the analyte over other competing ones. In addition to such a supramolecular approach, the development of fluorescent probes that sense analytes through chemical reactions has witnessed its usefulness for achieving high selectivity, in many cases, superior to that obtainable by the supramolecular approach. Creative incorporations of the reactive groups to latent fluorophores have provided novel chemical probes for various analytes. In this feature article, we overview the recent progress in the development of turn-on fluorescent probes that are operating through chemical reactions triggered by target analytes. Various chemical reactions have been implemented in the development of many reactive probes with very high selectivity and sensitivity toward target analytes. A major emphasis has been focused on the type of chemical reactions utilized, with the hope that further explorations can be made with new chemical reactions to develop reactive probes useful for various applications.     

"Clickable" polymersomes

Polymersomes, composed of amphiphilic polystyrene-block-poly(acrylic acid) (PS-b-PAA), with the periphery being covered with azide groups, were used for further functionalization using "click" chemistry.