乙二醇-聚(咪唑丙基-天冬酰胺)-聚丙氨酸三嵌段共聚物的合成及其pH-响应性药物控制释放性能的研究

聚天冬氨酸及其衍生物是一种具有良好生物相容性和可生物降解性的高分子材料, 被广泛应用于生物医药领域. 本研究通过大分子引发剂ω-胺基-α-甲氧基聚乙二醇引发N-羧基-α-氨基环内酸酐开环聚合和N-(3-氨丙基)咪唑侧基改性, 制备了一种侧链含有咪唑丙基的聚乙二醇-聚(咪唑丙基-天冬酰胺)-聚丙氨酸三嵌段共聚物. 在水溶液中, 此聚合物可自组装形成一种核-壳-冠型的三层共聚物胶束, 其中疏水性的聚丙氨酸链段自聚集形成胶束的核, 聚(咪唑丙基-天冬酰胺)链段形成具有pH-响应性的壳层, 用于包埋和释放药物, 外围的聚乙二醇链段可以提供一个稳定的水合冠层, 延长药物的体内循环时间. 利用咪唑环与游离阿霉素之间的π-π相互作用和疏水相互作用可以在自组装的过程中将阿霉素包埋到胶束内. 研究发现, 载药胶束随环境pH 值的降低药物的释放速率显著增加. 这主要是由于咪唑环在酸性条件下的质子化导致链段亲疏水性质发生明显变化.     

pH响应性ABC型共聚物的合成与溶液自组装

用单氨基聚乙二醇(m PEG-NH2)引发ε-三氟乙酰基-L-赖氨酸-N-羧酸酐(Lys(TFA)-NCA)开环聚合,得到了聚乙二醇-b-聚(ε-三氟乙酰基-L-赖氨酸)(PEG-b-PTLL)两嵌段共聚物.将PTLL链段末端的NH2与2-溴异丁酰溴反应得到了大分子引发剂,通过原子转移自由基聚合(ATRP)的方法分别分别引发苯乙烯(St)和N-异丙基丙烯酰胺(NIPAM)聚合,制备了结构明确、聚合度可控的聚乙二醇-b-聚(ε-三氟乙酰基-L-赖氨酸)-b-聚苯乙烯(PEG-b-PTLL-b-PS)和聚乙二醇-b-聚(ε-三氟乙酰基-L-赖氨酸)-b-聚(N-异丙基丙烯酰胺)(PEG-b-PTLL-b-PNIPAM)三嵌段杂化共聚肽.将PEG-b-PTLL-b-PNIPAM去保护后得到温度和p H响应三嵌段共聚物;将PEG-b-PTLL-b-PS去保护后得到p H响应的两亲性三嵌段共聚物.研究了PEG45-b-PLL106-b-PS20在混合溶剂H2O/DMF中的p H诱导胶束化行为.TEM结果表明,当水溶液p H小于PLL的p Ka时,PEG45-bPLL106-b-PS20形成球状胶束,当水溶液p H大于PLL的p Ka时,PLL转变成α-螺旋,PEG45-b-PLL106-b-PS20组装成盘状胶束.     

pH敏感新型嵌段共聚物的合成及其对叶酸的运载与释放

采用可逆加成-断裂链转移(RAFT)法,成功合成了一种具有荧光性能的新型p H敏感两亲性嵌段共聚物聚(甲基丙烯酰氧喹啉-co-甲基丙烯酸-2-二甲氨基乙酯)-b-聚(甲基丙烯酸聚乙二醇酯)(P(MAQ-co-DMAEMA)-b-PMAPEG),用红外光谱(FT-IR)、核磁共振(1H NMR)、凝胶渗透色谱(GPC)对其结构进行表征.此共聚物在水溶液中可自组装形成胶束,由扫描电子显微镜(SEM)、动态光散射(DLS)、紫外光谱(UV)和荧光光谱(FL)对聚合物胶束溶液表征可知胶束为尺寸约80 nm的球形颗粒,且胶束溶液具有良好的荧光性.以叶酸(FA)为模型药物,研究载药胶束在模拟人体环境中的控释行为.结果表明:P(MAQ-co-DMAEMA)-b-PMAPEG可作为包载药物的一种新型纳米材料,载药胶束的体外释放呈明显p H依赖性,且具有较好的荧光性,该聚合物有望成为具有荧光性的理想药物载体.     

不同嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为

采用氢核磁共振(¹H-NMR)、动态光散射(DLS)及透射电子显微镜(TEM)对聚乙二醇-嵌段-聚甲基丙烯酸N,N-二甲氨基乙酯(PEG-b-PDMAEMA)三种具有不同PEG/PDMAEMA嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为进行了研究. 研究表明, 两嵌段比例是影响聚合物胶束化过程的关键因素: 只有当其中聚乙二醇含量较低(质量分数低于33%)时, 聚合物才具有其pH/温度敏感胶束化特性. 此外, 共聚物溶液随温度胶束化过程与共聚物嵌段比大小密切相关. PEG-b-PDMAEMA这种不同于传统双亲性嵌段共聚物(DHBCs)在选择性溶剂中独特的胶束化行为, 是由聚合物溶液体系中各种基团之间的氢键作用决定的.     

两亲性嵌段共聚物的合成及其在离子液体中的自组装行为

采用阴离子开环聚合法合成了两亲性嵌段共聚物PLA-PEG-PLA.用FT-IR,1H NMR和GPC等手段对嵌段共聚物的结构组成进行了表征.两亲性嵌段共聚物在离子液体1-丁基-3-甲基咪唑六氟磷酸盐中能自组装成胶束,用透射电子显微镜观察了聚合物在离子液体中形成胶束的纳米结构.当疏水链长固定时,胶束的自组装形状主要依赖于亲水链的长度.两亲性共聚物在离子液体中可自组装成可控制结构的纳米胶束,这种纳米结构胶束在很多领域具有广泛的应用前景.     

化学酶法合成五嵌段聚合物及其自组装行为的研究

用酶促开环聚合与ATRP方法相结合,制备了聚甲基丙烯酸六氟丁酯-聚己内酯-聚乙二醇-聚己内酯-聚甲基丙烯酸六氟丁酯(PHFMA-b-PCL-b-PEG-b-PCL-b-PHFMA)五嵌段聚合物.首先用Novozym e 435作为催化剂合成了聚己内酯-聚乙二醇-聚己内酯三嵌段聚合物,然后通过端基官能化法合成了大分子引发剂,并用其引发甲基丙烯酸六氟丁酯(HFMA)的ATRP反应,合成了五嵌段聚合物.通过核磁和GPC证明了大分子引发剂和五嵌段共聚物的结构,五嵌段共聚物的GPC分析表明这种合成方法的可行.共聚物胶束的直径和大小通过动态光散射方法和原子力显微镜测试,五嵌段共聚物在水中的的自组装行为也被研究.结果证明胶束是球形,其平均直径为77 nm.聚合物在四氢呋喃中的浓度对聚合物的聚集形貌有很大的影响.     

双重敏感的磺酸甜菜碱-姜黄素药物载体的合成和表征

合成了聚姜黄素-二硫键-聚甲基丙烯酸二乙胺基乙酯-聚磺酸甜菜碱(Cur-DA-ss-PDEA-PS,或简写为Cur-ss-PDEA-PS),采用核磁、红外对聚合物结构进行了表征,用示差扫描量热法测试了聚合物热性能.用溶剂挥发法制备聚合物胶束,形成了聚磺酸甜菜碱为亲水壳层、聚姜黄素为疏水核、二硫键作为还原敏感基团和聚甲基丙烯酸二乙氨基乙酯为p H敏感基团的胶束.用荧光分光光度计测定了临界胶束浓度,动态光散射以及扫描电镜对胶束结构及性质进行了表征.结果显示,胶束稳定性良好,粒径分布较窄,且具有p H敏感性和还原敏感性.胶束载药量及包封率测试结果显示,相比于聚己内酯为内核的聚合物胶束,聚姜黄素的引入提高了胶束对药物的封装效果.     

PPEGMEA-g-PDEAEMA全亲水接枝共聚物的合成及其 包埋甲氨喋呤体外控释的研究

以聚乙二醇丙烯酸酯(PEGMEA)为起始原料, 将原子转移自由基聚合(ATRP)技术和从主干接枝(grafting-from)策略相结合, 合成了结构规整的聚甲基醚聚乙二醇丙烯酸酯-g-聚(N,N’-二乙基胺乙基甲基丙烯酸酯) (PPEGMEA-g- PDEAEMA)接枝共聚物. 这种接枝共聚物通过静电作用形成胶束包埋甲氨喋呤(MTX), 得到具有98.7%高包封率的药物载体, 体外药物释放得到很好的控制.     

聚乙二醇甲醚-聚(D,L-乳酸)嵌段共聚物纳米胶束的制备

聚乙二醇甲醚-聚(D;L-乳酸)嵌段共聚物纳米胶束的制备;聚乙二醇单甲醚;两亲性二嵌段共聚物;纳米沉淀技术     

轻度交联环糊精聚合物包结诱导自组装胶束的研究

合成了含β-环糊精的多取代单体(GMA)x-CD,经自由基聚合得到轻度交联的或高度支化的聚合物P(GMA)x-CD;同时由自由基共聚得到含有金刚烷侧基的疏水聚合物PtBA-ADA.研究表明,他们可在碱性水中通过β-CD和ADA间的包结络合作用形成胶束.当改变聚合物浓度比时,胶束尺寸在150~300 nm范围变化.TEM和AFM研究表明胶束具有核壳结构,核为疏水PtBA-ADA,壳为亲水(GMA)x-CD.通过对胶束壳CD基的化学交联,将胶束结构进一步固定化.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.