Study on chemisorption of H<Subscript>2</Subscript>, O<Subscript>2</Subscript>, CO and C<Subscript>2</Subscript>H<Subscript>4</Subscript>on Pt-Ag/SiO<Subscript>2</Subscript>catalysts by microcalorimetry and FTIR

Adsorption microcalorimetry has been employed to study the interaction of ethylene with the reduced and oxidized Pt-Ag/SiO₂catalysts with different Ag contents to elucidate the modified effect of Ag towards the hydrocarbon processing on platinum catalysts. In addition, microcalorimetric adsorption of H₂, O₂, CO and FTIR of CO adsorption were conducted to investigate the influence of Ag on the surface structure of Pt catalyst. It is found from the microcalorimetric results of H₂and O₂adsorption that the addition of Ag to Pt/SiO₂leads to the enrichment of Ag on the catalyst surface which decreases the size of Pt surface ensembles of Pt-Ag/SiO₂catalysts. The microcalorimetry and FTIR of CO adsorption indicates that there still exist sites for linear and bridged CO adsorption on the surface of platinum catalysts simultaneously although Ag was incorporated into Pt/SiO₂. The ethylene microcalorimetric results show that the decrease of ensemble size of Pt surface sites suppresses the formation of dissociative species (ethylidyne) upon the chemisorption of C₂H₄on Pt-Ag/SiO₂. The differential heat vs. uptake plots for C₂H₄adsorption on the oxygen-preadsorbed Pt/SiO₂and Pt-Ag/SiO₂catalysts suggest that the incorporation of Ag to Pt/SiO₂could decrease the ability for the oxidation of C₂H₄.     

Microstructure of SiO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> hybrid electrospun nanofibers and their application in dye degradation

SiO₂/TiO₂ hybrid nanofibers were prepared by electrospinning and applied for photocatalytic degradation of methylene blue (MB). The phase structure, specific surface area, and surface morphologies of the SiO₂/TiO₂ hybrid nanofibers were characterized through thermogravimetry (TG), X-ray diffraction (XRD) analysis, Brunauer–Emmett–Teller (BET) analysis, scanning electron microscopy (SEM), etc. XRD measurements indicated that doping of silica into TiO₂ nanofibers can delay the phase transition from anatase to rutile and decrease the grain size. SEM and BET characterization proved that silica doping can remarkably enhance the porosity of the SiO₂/TiO₂ hybrid nanofibers. The MB adsorption capacity and photocatalytic activity of the SiO₂/TiO₂ hybrid nanofibers were distinguished experimentally. It was found that, although increased silica doping content could enhance the MB adsorption capacity, the intrinsic photocatalytic activity gradually dropped. The SiO₂ (10 %)/TiO₂ composite nanofibers exhibited the highest MB degradation rate, being superior to SiO₂ (20 %)/TiO₂ or pure TiO₂.     

Quantum chemical simulation of propylene oxidation on Ag<Subscript>20</Subscript>

The adsorption of atomic oxygen and the mechanism of propylene (C₃H₆) oxidation to oxide (C₃H₆O) on an Ag₂₀ tetrahedral cluster were studied using density functional theory. The effects of cluster structure and active site structure on the mechanism of this reaction were considered. The oxidation of C₃H₆ can occur both on an edge and at the apex of the silver cluster. The C₃H₆O formation steps on the cluster edge are characterized by lower activation energies.     

Optimisation of accurate rutile TiO<Subscript>2</Subscript> (110), (100), (101) and (001) surface models from periodic DFT calculations

In this paper, geometric bulk parameters, bulk moduli, energy gaps and relative stabilities of the TiO₂ anatase and rutile phases were determined from periodic DFT calculations. Then, for the rutile phase, structures, relaxations and surface energies of the (110), (100), (101) and (001) faces were computed. The calculated surface energies are consistent with the natural rutile powder composition, even if a dependence on the number of layers of the slab used to model the surface was identified. Internal constraints, consisting in freezing some internal layers of the slab to atomic bulk positions, were thus added to mimic the bulk hardness in order to stabilise the computed surface energies for thinner systems. In parallel, the influence of pseudopotentials was studied and it appears that four valence electrons for titanium atoms are sufficient. The aim of this study was to optimise accurate rutile TiO₂ surface models that will be used in further calculations to investigate water and uranyl ion sorption mechanisms.     

Influence of NH<Subscript>3</Subscript>-treating temperature on visible light photocatalytic activity of N-doped P<Subscript>25</Subscript>-TiO<Subscript>2</Subscript>

The influence of NH₃-treating temperature on the visible light photocatalytic activity of N-doped P₂₅-TiO₂ as well as the relationship between the surface composition structure of TiO₂ and its visible light photocatalytic activity were investigated. The results showed that N-doped P₂₅-TiO₂ treated at 600°C had the highest activity. The structure of P₂₅-TiO₂ was converted from anatase to rutile at 700°C. Moreover, no N-doping was detected at the surface of P₂₅-TiO₂. There was no simply linear relationship between the visible light photocatalytic activity and the concentration of doped nitrogen, and visible light absorption. The visible light photocatalytic activity of N-doped P₂₅-TiO₂ was mainly influenced by the synergistic action of the following factors: (i) the formation of the single-electron-trapped oxygen vacancies (denoted as V_o^·); (ii) the doped nitrogen on the surface of TiO₂; (iii) the anatase TiO₂ structure.     

Dispersion state and catalytic properties of vanadia species on the surface of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> catalysts

The dispersion state and catalytic properties of anatase-supported vanadia species are studied by means of X-ray diffraction (XRD), laser Raman spectroscopy (LRS), H₂ temperature-programmed reduction (TPR) and the selective oxidation of o-xylene to phthalic anhydride. The almost identical values of the experimental dispersion capacity of V₂O₅ on anatase and the surface vacant sites available on the preferentially exposed (001) plane of anatase suggest that the highly dispersed vanadium cations are bonded to the vacant sites on the surface of anatase as derived by the incorporation model. When the loading amount of V₂O₅ is far below its dispersion capacity, the dispersed vanadia species might mainly consist of isolated VO_x species bridging to the surface through V-O-Ti bonds. With the increase of V₂O₅ loading the isolated vanadia species interact with their nearest neighbors (either isolated or polymerized vanadia) through bridging V-O-V at the expenses of V-O-Ti bonds, resulting in the increase of the ratio of polymerized to isolated vanadia species and the decrease of the reactivity of the associated surface oxygen anions and, consequently, although the activity increases with loading to reach a maximum value, the turn over number (TON) of the V₂O₅/TiO₂ catalyst decreases linearly. When the loading amount of V₂O₅ is higher than its dispersion capacity, the turn over number decreases more rapidly with the increase of V₂O₅ loading due to the formation of V₂O₅ crystallites in which the oxygen anions associated with V-O-V bonds are less reactive and only partially exposed on the surface.     

Preparation of nanocrystalline TiO<Subscript>2</Subscript> powders for photocatalytic oxidation of phenol

Nanocrystalline TiO₂ powders in the anatase, rutile, and mixed phases prepared by hydrolysis of TiCl₄ solution were of ultrafine size (<7.2 nm) with high specific surface areas in the range 167 to 388 m²/g. In the photocatalytic degradation of phenol as model reaction, the photocatalytic properties of TiO₂ nanoparticles were evaluated by use of UV–vis absorption spectroscopy and total organic carbon (TOC) content. The synthetic mixed-phase TiO₂ powder calcined at 400 °C had higher activity than pure anatase or rutile; it degraded more than 90% phenol to CO₂ (evaluated by TOC) after irradiation with near UV light for 90 min at a catalyst loading of 0.4 g/L. The TOC results indicated that rutile TiO₂ crystallites of particle size 7.2 nm resulted in much better photocatalytic performance than particles of larger size. This result suggested that some intermediates, not determined by UV–vis absorption spectroscopy, existed in the solution after the photocatalytic process over the rutile TiO₂ photocatalysts of larger crystallite size.     

Preparation and photoelectrochemical performance of TiO<Subscript>2</Subscript>/Ag<Subscript>2</Subscript>Se interface composite film

Coupling TiO₂ with a narrow band gap semiconductor acting as the photosensitizer has attracted much attention in solar energy exploitation. In this work, the porous TiO₂ film was first formed on the conducting glass plate (CGP) substrate by the decomposition of polyethylene glycol (PEG) mixing in titanium hydroxide sol at 450°C. Then, the TiO₂/Ag²Se interface composite film was fabricated by interface reaction of AgNO₃ with NaSeSO₃ on the activated surface of porous TiO₂ film. The results of SEM and XRD analyses indicated that the porous TiO₂ layer was made up of the anatase crystal, and the Ag₂Se layer was made up of congregative small particles that have low-temperature α-phase structure. Due to its efficient charge separation for the photo-induced electron-hole pairs, the TiO₂/Ag₂Se interface composite film as-prepared has good photovoltaic property and high photocurrent response for visible light, which have been confirmed by the photoelectrochemical measurements.     

Preparation of Pt<Subscript>core</Subscript>Ag<Subscript>shell</Subscript> nanoparticles: Catalytic reduction of Ag<Superscript>+</Superscript> ions by hydrogen

It is shown that the saturation of an aqueous solution containing silver ions with hydrogen in the presence of 9.5-nm platinum nanoparticles leads to the reduction of silver and the formation of Pt_coreAg_shell bimetal nanoparticles. An increase in the concentration of silver ions gives rise to a number of elementary silver layers that cover the platinum core. It is established that the concentration of silver ions does not substantially affect the rate of the formation of a silver shell on the surface of platinum nanoparticles.     

Synthesis of Mixed-Phase TiO<Subscript>2</Subscript> Nanopowders Using Atmospheric Pressure Plasma Jet Driven by Dual-Frequency Power Sources

Mixed-phase TiO₂ nanopowders with different ratios of anatase and rutile have been successfully synthesized using atmospheric pressure plasma jet driven by dual-frequency power sources. The crystal structures of the TiO₂ nanopowders were characterized by X-ray diffraction, SAED, HRTEM, and Raman shift spectroscopy. These results indicated that samples possessed anatase and rutile structure, in addition, the crystallinity of the TiO₂ nanopowders increased and the chlorine contamination decreased with discharge RF power increasing. The photocatalytic activity of the TiO₂ nanopowders was evaluated by decomposition methylene blue solution. The TiO₂ nanopowders which were produced at the discharge RF power of 110 W had the highest photocatalytic activity. Optical emission spectroscopy (OES) was used to detect various excited species in the plasma jet. The results indicate that the various RF power significantly changes the intensities of emission lines (Ar, Ar⁺, Ti, Ti⁺, Ti²⁺, Ti³⁺ and O), which results in the TiO₂ nanopowders a mixture of anatase and rutile phases. The nonequilibrium chemical composition could be formed in one step without anneal. It may have potential applications for synthesizing nanosized particles of high crystallinity by reactive nonthermal plasma processing.     

Effect of Ag Loading on the Microstructure of TiO<Subscript>2</Subscript> Electrospun Nanofibers

In this research work, crystalline structure, phase transformation, morphology and mean size of titanium dioxide (TiO₂) electrospun nanofibers have been tailored by loading with 2.5, 5.0 and 7.5 wt.% of silver (Ag) which was followed by calcination. The as prepared non woven mats of nanofibers were calcinated at 500 °C to allow the reaction moieties to leave the TiO₂ matrix and subsequently formation of Ag clusters. The effect of Ag loading and calcination on the transformation of microstructure of these electrospun nanofibers have been characterized by XRD, FESEM, FT-IR and Raman spectroscopy (RS). The mean diameter of Ag loaded nanofibers has been found to decrease upon calcination which was estimated to 70 nm whereas length was in the order of mm range. XRD and RS results have strongly supported the transformation of crystalline phase from rutile (A) to anatase (R) above 2.5 wt.% of Ag loading in TiO₂ after calcination. The roughness on the outer surfaces of these nanofibers has been observed to increase with the Ag loading consequent to calcination, which has been attributed to the formation Ag nanoparticles that were found adsorbed at the surfaces. An interesting finding of this study is the existence of 1D nanofibers’ structure even at higher (7.5 wt.%) Ag loading, as observed by the SEM micrographs.     

DSC investigation of nanocrystalline TiO<Subscript>2</Subscript> powder

The aim of the article is to investigate the influence of particle size on titanium dioxide phase transformations. Nanocrystalline titanium dioxide powder was obtained through a hydrothermal procedure in an aqueous media at high pressure (in the range 25–100 atm) and low temperature (≤200 °C). The as-prepared samples were characterized with respect to their composition by ICP (inductive coupled plasma), structure and morphology by XRD (X-ray diffraction), and TEM (transmission electron microscopy), thermal behavior by TG (thermogravimetry) coupled with DSC (differential scanning calorimetry). Thermal behavior of nanostructured TiO₂ was compared with three commercial TiO₂ samples. The sequence of brookite–anatase–rutile phase transformation in TiO₂ samples was investigated. The heat capacity of anatase and rutile in a large temperature range are reported.     

Thermodynamic study of Ag<Subscript>8</Subscript>GeSe<Subscript>6</Subscript> by EMF with an Ag<Subscript>4</Subscript>RbI<Subscript>5</Subscript> solid electrolyte

The Ag–Ge–Se system was studied in the range of compositions Ag₂Se–GeSe₂–Se by measuring the EMF of the concentration (relative to the silver electrode) circuits with a solid electrolyte Ag₄RbI₅ in the temperature range 290–430 K. The polymorphic transition temperature of Ag₈GeSe₆ (320 K) was determined and the partial molar functions of silver were calculated for both crystal modifications of this compound based on the EMF measurements. The thermodynamic functions of formation and entropy of both modifications of Ag₈GeSe₆ and the thermodynamic functions of its polymorphic transition were calculated.     

Phase formation in mixed TiO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> oxides prepared by sol-gel method

Pure titania, zirconia, and mixed oxides (3–37 mol.% of ZrO₂) are prepared using the sol-gel method and calcined at different temperatures. The calcined samples are characterized by Raman spectroscopy, X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption porosimetry. Measurements reveal a thermal stability of the titania anatase phase that slightly increases in the presence of 3–13 mol.% of zirconia. Practically, the titania anatase-rutile phase transformation is hindered during the temperature increase above 700°C. The mixed oxide with 37 mol.% of ZrO₂ treated at 550°C shows a new single amorphous phase with a surface area of the nanoparticles double with respect to the other crystalline samples and the formed srilankite structure (at 700°C). The anatase phase is not observed in the sample containing 37 mol.% of ZrO₂. The treatment at 700°C causes the formation of the srilankite (Ti_0.63Zr_0.37O_x) phase.     

Yttria stabilized zirconia solid electrolyte surface modification with ZrO<Subscript>2</Subscript>, Y<Subscript>2</Subscript>O<Subscript>3</Subscript>, and ZrO<Subscript>2</Subscript> + 9 mol % Y<Subscript>2</Subscript>O<Subscript>3</Subscript> films

The surface of ceramic electrolyte ZrO₂ + 9 mol % Y₂O₃, hereinafter referred to as YSZ (abbreviated yttria stabilized zirconia), was modified with 0.1 to 0.2 μm oxide films of ZrO₂, Y₂O₃, and YSZ (same composition as substrate) by dip coating in alcohol solutions of the relevant salts and further annealing. The results of scanning electronic microscopy and X-ray diffraction evidence epitaxial film growth. By means of impedance spectroscopy at the temperatures of 500 to 600°C, the effect of YZS electrolyte surface modification with ZrO₂, Y₂O₃, and YSZ films to the polarization resistance of silver electrode was studied.     

Selective catalytic oxidation of ammonia into nitrogen and water vapour over transition metals modified Al<Subscript>2</Subscript>O<Subscript>3</Subscript>, TiO<Subscript>2</Subscript> and ZrO<Subscript>2</Subscript>

Copper or iron supported on commercially available oxides, such as γ-Al₂O₃, TiO₂ (anatase) and monoclinic tetragonal ZrO₂ (mt-ZrO₂) were tested as catalysts for selective catalytic oxidation of ammonia into nitrogen and water vapour (NH₃-SCO) in the low temperature range. Different commercial oxides were used in this study to determine the influence of the specific surface area, acidic nature of the support and crystalline phases as well as of the type of species and aggregation state of transition metals on the catalytic performance in selective ammonia oxidation. Copper modified oxide supports were found to be more active and selective to nitrogen than catalysts impregnated with iron. Activities of both transition metal modified samples decreased in the following order: mt-ZrO₂, TiO₂ (anatase), γ-Al₂O₃. Quantitative total ammonia conversion was achieved with the Cu/ZrO₂ catalytic system at 400°C. Characterisation techniques, e.g. H₂-temperature programmed reduction, UV-VIS-diffuse reflectance spectroscopy, suggest that easily reducible copper oxide species are important in achieving high catalytic performances at low temperatures.     

Synthesis and crystal structure of new double mercury silver phosphide iodide Hg<Subscript>12</Subscript>Ag<Subscript>41</Subscript>P<Subscript>88</Subscript>I<Subscript>41</Subscript>

New double mercury silver phosphide iodide Hg₁₂Ag₄₁P₈₈I₄₁ (1) was synthesized and its crystal structure was established. Compound 1 crystallizes in the cubic system. The characteristic feature of the crystal structure 1 is the presence of the anionic cage clusters P₁₁ ³⁻, which have been previously found in alkali metal compounds only. The well-ordered P₁₁ ³⁻ clusters form a system of polyhedra, which encapsulate various disordered α-AgI-type fragments. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1882–1886, October, 2007.     

Active Sites for Adsorption and Reaction of Molecules on Rutile TiO2(110) and Anatase TiO2(001) Surfaces (cited: 1)

The reactivity of specific sites on rutile TiO₂(110)-(1×1) surface and anatase TiO₂(001)-(1×4) surface has been comparably studied by means of high resolution scanning tunneling microscopy. At the rutile TiO₂(110)-(1×1) surface, we find the defects of oxygen vacancy provide distinct reactivity for O₂ and CO₂ adsorption, while the terminal fivefold-coordinated Ti sites dominate the photocatalytic reactivity for H₂O and CH₃OH dissociation. At the anatase TiO₂(001)-(1×4) surface, the sixfold-coordinated terminal Ti sites at the oxidized surface seem to be inert in both O₂ and H₂O reactions, but the Ti-rich defects which introduce the Ti³⁺ state into the reduced surface are found to provide high reactivity for the reactions of O₂ and H₂O. By comparing the reactions on both rutile and anatase surfaces under similar experimental conditions, we find the reactivity of anatase TiO₂(001) is actually lower than rutile TiO₂(110), which challenges the conventional knowledge that the anatase (001) is the most reactive TiO₂ surface. Our findings could provide atomic level insights into the mechanisms of TiO₂ based catalytic and photocatalytic chemical reactions.     

Dissociative adsorption of molecular hydrogen onto Pt<Subscript>6</Subscript> and Pt<Subscript>19</Subscript> platinum clusters located on the tin dioxide surface: Quantum-chemical modeling

It is suggested that, for the operation of platinum catalysts based on tin dioxide in air hydrogen fuel cells, hydrogen spillover (migration) leading to a change in the electron and proton contributions of the catalyst conductivity is of crucial importance. The hydrogen adsorption, dissociation, and migration in the platinum-tin dioxide-hydrogen system surface have been modeled by the density functional theory method within the generalized gradient approximation (GGA) under periodic conditions using a projector-augmented plane-wave (PAW) basis set with a pseudopotential. It has been demonstrated that the adsorption energy of a hydrogen molecule onto a platinum cluster increases from 1.6 to 2.4 eV as the distance to the SnO₂ substrate decreases. The calculated Pt-H bond length for adsorbed structures is 1.58–1.78 Å. The computer modeling has demonstrated that: (1) the hydrogen adsorption energy on clusters is higher than on the perfect platinum surface; (2) dissociative chemisorption onto Pt _n clusters can occur without a barrier and depends on the adsorption site and the cluster structure; (3) the adsorption energy of hydrogen onto the SnO₂ surface is higher than the adsorption energy onto the platinum cluster surface: (4) multiple H₂ dissociation on the tin dioxide surface occurs with a barrier; (5) the dissociation adsorption of hydrogen molecules onto the platinum cluster surface followed by atom migration (spillover) is energetically favorable.