Analysis of mercury(II), methylmercury and phenylmercury by RPHPLC with micellized dithizone post-column derivatization photometric detection

Post-column derivatization detection system based on dithizone solubilized in cetyltrimethyl-ammonium hydrogenesulfate micellar media at pH 2.0 was devised and evaluated for selective detection of mercury(II), methylmercury and phenylmercury in reversed-phase HPLC system with photometric detection at 500 nm. This reagent solution is fully compatible with acidic organo-aqueous mobile phases generally used in RPHPLC. With the aid of the detection systematic study of the retention behaviour of three mercury species on octadecylsilica sorbent was carried out. Influence of pH, acetonitrile volume fraction, complex forming additives was investigated in detail. In mobile phase consisting of 5–30% of acetonitrile in water at pH 2.0 and 2·10^–4 mol·I^–1 DCTA linear calibration curves were measured in range 20–1000 ppb with correlation coefficient better than 0.99. Detection limits were 1–5 ng for this three mercury species. Interferences of copper(II) and silver(I) are negligible.     

Supported liquid membrane extraction of W(VI) ions using tri-n-octylamine as carrier

Study of the extraction of W(VI) ions using supported liquid membrane has been carried out. The carrier used for this metal ion transport, is tri-n-octylamine (TOA) dissolved in xylene. The liquid was supported in microporous polypropylene film. The parameters studied are effect of carrier concentration in the membrane, acid concentrations in the feed solution, concentration of stripping agent on transport of W(VI) ions and of temperature on the transport properties of these supported liquid membranes. The optimum conditions of transport for these metal ions determined are, TOA concentration, 0.66 mol·dm^–3 (TOA); HF concentration in the feed solution, 0.01 mol·dm^–3 and concentration of NaOH used as stripping agent 2.5 mol·dm^–3. The maximum flux and permeability determined under optimum conditions are 3.06·10^–5 mol·m^–2·s^–1 and 8.44·10^–11 mol· ·m²·s^–1 at 25±2°C and 4.21·10^–5 mol·m^–2·s^–1 and 11.55·10^–11 mol·m²·s^–1 at 65°C, respectively. The diffusion coefficients for the metal ion carrier complex in the membrane have also been determined. Under the optimum conditions the value for the metal ion carrier complex is 0.14·10^–11 mol·m²·s^–1. Mechanism of transport and the complex formed in the presence of HF have also been discussed. The transport process involves two carrier amine molecules and two protons.     

Zur emissionsspektralanalytischen Bestimmung von Cu-, Fe- und Pb-Spuren in ZnS-Leuchtstoffen

Zusammenfassung Eine emissionsspektralanalytische Methode wird beschrieben, mit deren Hilfe 3 · 10^–7 bis 3 · 10^–5 g Fe, 2 · 10^–6 bis 3,2 · 10^–6 g Pb und 3 · 10^–8 bis 1 · 10^–5 g Cu pro g ZnS bestimmt werden können.

---

Summary An emission spectral analytical method is described by which 3 · 10^–7 to 3 · 10^–5 g iron, 2 · 10^–6 3.2 · 10^–5 g lead, and 3 · 10^–8–1 · 10^–5 g copper per g ZnS can be determined.

---

Résumé On décrit une méthode d'analyse spectrale par émission permettant de doser 3 · 10^–7–3 · 10^–5 g Fe, 2 · 10^–6–3,2 · 10^–5 g Pb et 3 · 10^–8–1 · 10^–5g Cu par g ZnS.

---

---

Herrn Prof. Dr.A. A. Benedetti-Pichler zum 70. Geburtstag gewidmet. Vorgetragen am XI. Colloquium Spectroacopicum Internationale, Beograd, 1963.

---

Wir danken auch an dieser Stelle HerrnP. Endröi für die Zubereitung der Standards mit Cu- und Fe-Zusatz und Herrn DirektorF. Kömüves für die Erlaubnis zur Publikation dieser Arbeit.     

Investigation of adsorption behaviour of mercury in microamounts on manganese dioxide from aqueous solutions

Adsorption of mercury onto manganese dioxide was studied in relation to the concentrations of electrolyte, adsorbent and adsorbate and foreign ions. Adsorption of other metal ions under similar conditions was also measured. Adsorption decreases with increasing electrolyte concentration. Thiosulfate, thiocyanate, iodide and all cations tested suppress the adsorption; the greater the ionic potential of cation, the weaker the adsorption of mercury. Adsorption follows the Freundlich-type isotherm over a wide range of mercury concentration (10^–7–10^–8 g·ml^–1). 98% of the adsorbed mercury can be eluted from the oxide column with 60 ml of 3M nitric acid solution.     

Studies on intermolecular interactions of metal chelate complexes. Part X. Interactions of metal chelates with ozone

Summary The interactions of more than forty metal chelate complexes, dithiocarbamates, dithiophosphates and acetylacetonates, with ozone are studied in homogeneous phase and the stoichiometry and the rate constants of the reactions estimated. Most powerful ozone deactivators are nickel(II) and copper(II) dithiocarbamate and dithiophosphate complexes interacting with 6.5 moles ozone per mole of the ligand with rate constant >0⁶m · I^–1 · s^–1. The remote ligand substituents do not influence the reaction parameters. Other sulphur-containing complexes of iron(III), cobalt(II), cobalt(III), zinc(II), manganese(III), bismuth(III), antimony(III), arsenic(III), cadmium(II), platinum(II), palladium(II) and chromium(III) deactivate 3–4 moles ozone per mole ligand with rate constants of 10²–10⁴ m · I^–1 · s^–1. Acetylacetonate complexes of copper(II), nickel(II), cobalt(III), iron(III), chromium (III), and oxovanadium(II) deactivate 1–3 moles ozone per mole ligand with a rate constant of 10–10⁴ m · I^–1 · s^–1. Using e.p.r. and electronic spectra, some intermediate products are detected and the mechanism of the reaction is discussed. The reported data are compared with other widely used antiozonants and the metal chelates are shown to have several advantages.     

Extraction-spectrophotometric determination of uranium(VI) with PAR and N-octylacetamide

A new and simple method for selective spectrophotometric determination of uranium(VI) with 4-(2-pyridylazo)resorcinol (PAR) and N-octylacetamide into benzene over pH 7.0–9.0 is described. The molar absorptivity of the complex with 9 different amides is in the range of (0.40–3.2)·10⁴ 1·mol^–1·cm^–1 at the absorption maximum. Out of these, the most sensitive compound N-octylacetamide (OAA) was chosen for detailed studies in the present investigation. The detection limit of the method is 0.008 g U·ml^–1. The system obeys Beer's law in the range of 0–5 g U·ml^–1. The method is free from interferences of most of the common metal ions except vanadium(V) and copper(II), which are masked by proper masking agents. The composition of the complex is determined by curve-fitting method. The method has been applied for the recovery of the metal from rock samples and synthetic mixtures.     

Determination of cobalt,nickel and copper in steel and in radioactive wastes using desferrioxamine “B”

A simple and sensitive spectrophotometric method for the determination of cobalt, nickel and copper with desferrioxamine-B (desferal) is described. The sensitivity of the colour reactions of cobalt, nickel and copper is increased by introducing desferal. The pH range for the formation of Co II, Ni II or Cu II-desferal. Chelates is 4.5–8.5, 5.5–9, and 6.5–9.5, respectively. The molar absorptivities of the chelates are 1.2·10⁵, 5.6·10⁴ and 4.8·10⁴ at 545 nm, 390 nm and 680 nm, respectively. Beer's law is obeyed up to 10 g/ml of metal ion. The effect of desferal concentration, pH, standing time and interfering ions are discussed. The method was applied to the determination of trace amounts of cobalt, nickel and copper in steel and simulated radioactive wastes.     

Elektrochemische Methoden in der Ultramikroanalyse

Zusammenfassung Ein komplexometrisches Verfahren zur potentiometrischen und voltammetrischen Titration von Nanogrammengen Kupfer wird beschrieben. Durch Einsatz der ultramikroanalytischen Arbeitstechnik können potentiometrisch noch 4 · 10^–10 g und voltammetrisch noch 5 · 10^–9 g Cu mit befriedigender Genauigkeit bestimmt werden.

---

Electrochemical methods in ultramicroanalysisI. Potentiometric and voltammetric titration of copper in the ng-scale

The complexometric method described for the potentiometric and voltammetric titration of copper in nanogram quantities permits the determination of 4×10^–10 g Cu (potent.) and 5×10^–9 g Cu (volt.) with satisfactory accuracy by help of ultramicro-analytical operations.

     

Thermal decomposition of copper(II) benzenetricarboxylates in air atmosphere

The conditions of thermal decomposition of copper(II) benzenetricarboxylates in air atmosphere at heating rates of 10 and 5 deg·min^–1 were studied. At 10 deg · min^–1, the hemimellitate and trimesinate of copper(II) lose crystallization water and then decompose directly to CuO, whereas at 5 deg·min^–1 they decompose to CuO through Cu₂O. The trimellitate of copper(II) heated at various rates decomposes in the same way: it loses 1 water molecule and then decomposes directly to CuO.     

A study of the polarographic behaviour of meso-tetra(4-trimethylammoniumphenyl)porphine and its copper and magnesium complexes and its analytical applications

The investigation of the electrochemical reduction and the adsorption of meso-tetra(4-trimethylammoniumphenyl)porphine (T(4-TMAP)P) at a mercury electrode in alkaline solution shows that the overall reduction involves three two-electron steps, of which the first step is reversible and the latter two are irreversible. In addition, T(4-TMAP)P and its metal complexes of Cu(II) and Mg(II) can be strongly adsorbed on the surface of a mercury electrode. The adsorption phenomena have been utilized as a preconcentration step for the determination of trace amounts of the two ions by single sweep polarography. For copper, the detection limit is 1 × 10^–8 mol dm^–3, for magnesium, 1 × 10^–7 mol dm^–3, the latter being limited by the reagent blank. The proposed method was applied to the determination of Cu and Mg in various types of samples (chemicals, hair and liver tissues) with satisfactory results.     

Extraction of Pd(II) ions using tri-n-octylamine xylene base supported liquid membranes

Membranes, based on tri-n-octylamine (TOA) xylene liquid, supported in hydrophobic microporous films have been used to study the transport of Pd(II) ions, after extraction into the membrane. Various parameters, such as the effect of hydrochloric acid concentration in the feed solution, TOA concentration in the membrane phase, effect of stripping agent like nitric acid concentration, and temperature on the flux of Pd(II) ions across the liquid membranes have been investigated. The optimum conditions of transport for these metal ions determined are, TOA concentration, 1.25 mol·dm^–3, HCl concentration in the feed solution, 5 mol·dm^–3, and concentration of nitric acid used as a stripping, agent 5 mol·dm^–3. The maximum values of the flux and permeability determined under the optimum condition are 23·10^–6 mol·m^–2·s^–1 and 2.40·10³ m²·s^–1 at 25°C. The results obtained have been used to elucidate the mechanism of palladium transport.     

Synthesis,electrochemical and magnetic properties of new macrocyclic copper(II) complexes derived from 2,6-diacetyl-4-4-methylphenol

A series of binuclear macrocyclic copper(II) complexes [Cu2Lm,n](ClO4)2·xH2O have been prepared in which the two copper(II) ions are placed in two geometrically distinct co-ordination environments. The macrocycles with two 2,6-bis(iminomethyl)-4-methylphenol entities combined through two different lateral chains, –(–CH2–)–m and –(–CH2–)–n (m = 2 or 3, n = 2 to 5) were synthesized by stepwise cyclization. Cyclic voltammetry shows the presence of two reduction couples: CuIICuII CuICuII and CuIICuI CuICuI. The comproportionation constants, Kcom, for the mixed valence CuICuII complexes have been determined electrochemically. The Kcom value increases in the order of the macrocycles: (L2,2)^2–<(L2,3)^2–<(L2,4)^2–<(L2,5)^2– and (L3,3)^2–<(L3,4)^2–<(L3,5)^2–. Cryomagnetic investigations (80–300K) reveal a moderately strong antiferromagnetic spin exchange between the copper(II) ions within each complex (J = –210 to –390 cm–1).     

ESR spectra of copper(ii) complexes with 2-hydroxy-5-methyl- and 5-chloro-2-hydroxyacetophenone acyldihydrazones

ESR spectra of binuclear copper(ii) complexes with 2-hydroxy-5-methyl- and 5-chloro-2-hydroxyacetophenone acyldihydrazones (H₄L) [Cu₂L·2Py], in which the coordination polyhedra are linked by the polymethylene chain with different lengths (from one to five units), were studied. The spectra of the complexes based on acyldihydrazones of malonic, succinic, glutaric, and adipic acids exhibit weak exchange interactions between the paramagnetic sites. These interactions induce seven HFS lines from two equivalent copper nuclei with the constant 40·10^–4 cm^–1 in the ESR spectra of liquid solutions. An increase in the polymethylene chain length to five units prevents the exchange interactions, and the ESR spectrum of the complex based on heptadioic acyldihydrazone contains the signal of four HFS lines with the constant 72·10^–4 cm^–1, which is common for the copper(ii) monomeric compounds.     

Transport of titanium(IV) ions across di-2-ethylhexylphosphoric acid-CCl4 supported liquid membranes

Transport study for Ti(IV) ions using di-2-ethylhexylphosphoric acid (D2EHPA) (carrier)-CCl₄ (diluent) liquid supported membrane in microporous polypropylene hydrophobic film has been performed. The parameters studied are effects of carrier, H₂SO₄, stripping agent (NH₄F) concentrations and temperature variation on flux and permeability coefficients of the metal ion. The optimum concentrations of transport found are 2.04 mol·dm^–3 D2EHPA, 1.0 mol·dm^–3 H₂SO₄ in the feed and 1 mol·dm^–3 NH₄F as stripping agent. The maximum flux and permeability coefficient determined are 1.32·10^–5 mol·m^–2·s^–1 and 8.02·10^–12 mol·m^–2·s^–1, respectively. The transport of this metal ion is increased with increase in temperature. The mechanism of transport appears to be based on coupled counter ion transport phenomenon.     

Spectrophotometric determination of mercury with thiocyanate and Rhodamine B

Summary Mercury(II) in the presence of a large excess of thiocyanate forms a violet colour with Rhodamine B. The complex formed can be stabilized by addition of poly(vinyl alcohol), and forms the basis for a spectrophotometric method for determination of trace amounts of mercury. The calibration graph for measurement at 610 nm is linear in the range 1–15g of mercury per 25 ml, with a molar absorptivity of 1.1×10⁵l· mole^–1·cm·. The effect of foreign ions has been studied and the method can be applied to the determination of mercury in air with reliable analytical results.

---

Spektrophotometrische Bestimmung von Quecksilber mit Rhodanid und Rhodamin B

Zusammenfassung In Gegenwart eines großen Überschusses von Rhodanid bildet Hg(II) mit Rhodamin B eine violette Färbung. Durch Zusatz von Polyvinylalkohol kann dieser Komplex stabilisiert werden und bietet somit die Grundlage für die spektrophotometrische Bestimmung von Hg-Spuren. Die Eichkurve für die Messung bei 610 nm verläuft für 1–15g Hg/25 ml linear. Die molare Absorptivität beträgt 1,1×10⁵ l·mol^–1·cm^–1. Die Fremdionenwirkung wurde untersucht. Das Verfahren kann zur Hg-Bestimmung in Luft verwendet werden.

     

Analytical study of a cadmium ion-selective ceramic membrane electrode

Summary A cadmium ion-selective membrane electrode has been developed by applying a hot-pressing method. The membrane contains cadmium sulphide, silver sulphide, and copper(I)-sulphide.The best response was obtained with a membrane containing less than 30% of copper(I) sulphide and more than 5% of cadmium sulphide. The Nernstian slope was secured over an activity range of 10^–1 to 10^–6 M, and potentiometric analysis could be carried out over a concentration range of 10^–1-10^–7 M. The potentials were maintained at constant values over more than 6 months. Also, the potentials satisfied the Nernst's factor 2.303 RT/2F at the temperature range between 0 and 95°C. Among the common ions, silver, copper(II), iron(III), mercury(II), sulphide, and iodide ions interfered seriously. However, about 10–100 times of lead and bromide ions and more than 1000 times of alkali metal, alkaline earth metal, zinc, aluminium, nickel, cobalt, manganese(II), perchlorate, and nitrate ions did not interfere at all.

---

Analytische Untersuchung einer cadmiumionenselektiven keramischen Membranelektrode

Zusammenfassung Die Membran wurde durch Pressen von Cd-, Ag und Cu(I)-sulfid bei 200–500°C und 3–7 t/cm² hergestellt. Die beste Ansprechempfindlichkeit ergab sich bei einem Gehalt von <30% Cu₂S und >5% CdS. Die Nernstsche Gleichung war gültig im Bereich von 10^–1–10^–6 M, der analytische Bereich war 10^–1–10^–7 M. Die Potentiale konnten mehr als 6 Monate auf einem konstanten Wert gehalten werden. Sie entsprachen dem Nernstschen Faktor, 2,303·R·T/2 F, im Temperaturbereich von 0–95°C. Erhebliche Störungen werden durch Ag⁺-, Cu²⁺-, Fe³⁺-, Hg²⁺-, S^2– und J^–-Ionen verursacht. Jedoch verursachen etwa 10–100fache Mengen von Pb²⁺- und Br^–-Ionen sowie mehr als 1000fache Mengen von Alkali-, Erdalkali-, Zn²⁺-, Al³⁺-, Ni²⁺-, Co²⁺-, Mn²⁺-, ClO₄ ^–- und NO₃ ^–-Ionen keine Störungen.

---

---

The authors thank Dr. S. Kisaka, Dr. K. Sugihara, Dr. S. Hayakawa and Dr. S. Mori for their encouragement in this work.     

Voltammetric trace determination of ubiquinones at mercury electrodes

Summary Voltammetric methods were developed for the determination of ubiquinones on the basis of their adsorption and redox behaviour at mercury electrodes. Linear calibration plots were obtained in the concentration range between 10^–4 mol/l and 2.3·10^–5 mol/l from differential pulse voltammetric measurements under experimental conditions avoiding significant adsorption of the analyte. A remarkable decrease of the detection limit down to 10^–7 mol/l was achieved with the help of adsorptive accumulation of ubiquinone molecules at the mercury electrode followed by differential pulse detection. The resulting non-linear calibration plot was explained with a model, which takes into account both adsorption and diffusion of the analyte.     

Molecular structures and ESR spectra of copper(ii) complexes with 2-hydroxypropiophenone acyldihydrazones

The dinuclear copper(ii) complexes with 2-hydroxypropiophenone acyldihydrazones (H₄L) having the composition [Cu₂L·mPy], where the L ligand contains the polymethylene chain with different lengths (from two to five units), were synthesized and studied. The crystal and molecular structures of the 2-hydroxypropiophenone adipoylhydrazone complex [Cu₂L·4Py]·Py were established by X-ray diffraction analysis. Copper atoms are 8.212 distant from each other, and their nearest environment has the tetragonal pyramidal geometry. The ESR spectra of solutions of the complexes based on acyldihydrazones of succinic, glutaric, and adipic acids contain seven HFS lines with the constant 40·10^–4 cm^–1 from two equivalent copper atoms. The spectra were interpreted as a result of the spin-spin exchange interaction of two unpaired electrons. An increase in the polymethylene chain length to five units prevents exchange interactions. The ESR spectrum of the complex with acyldihydrazone of pimelic acid contains a signal of four HFS lines with a _Cu = 73.4·10^–4 cm^–1, which is typical of mononuclear copper(ii) complexes.     

Die Anwendung der Pikrolonsäure zum Nachweis von Kupferspuren mit dem Elektronenmikroskop

Zusammenfassung Es wurden Versuche ausgeführt, um Kupferspuren, die auf dem Trägerfilm des elektronenmikroskopischen Objektträgers elektrolytisch gefällt waren, durch Umsetzung mit Pikrolonsäure nachzuweisen. Zur Prüfung der Reaktionsbedingungen diente eine Versuchsreihe, deren Ergebnisse die beste Ausführungsweise des Verfahrens vermitteln. Zunächst wurden größere Kupfermengen von 5 · 10^–9 g angewandt und deren Reaktionsprodukte in elektronenoptischen Aufnahmen festgehalten. Nach anschließendem, allmählichem Verkleinern der Kupfermenge wird als Beispiel der Nachweis von 1 · 10^–10 g Kupfer erbracht und als vorläufige Grenze des Verfahrens der Nachweis von 5 · 10^–11 g Kupfer angegeben. An Abbildungen bei höheren Vergrößerungen läßt sich die Ähnlichkeit der schönen und eindrucksvollen kristallinen Nachweisprodukte zeigen.

---

Summary Experiments were conducted to detect traces of copper, which had been precipitated electrolytically on the carrier film of the electron microscope slide, by reaction with picrolonic acid. The reaction conditions were determined by a series of trials, whose results revealed the most favorable procedure. In the beginning larger quantities of copper (5 · 10^–9) were taken and their reaction products were recorded in electron optical photographs. After subsequent gradual diminution of the amount of copper, it was found possible to detect 1 · 10^–10 g of copper, and the provisional limit of the procedure was given as the detection of 5 · 10^–11 g copper. The similarity of the beautiful and impressive crystalline detection products is shown in the highly enlarged photographs.

---

Résumé On a effectué des expériences pour rechercher, par décomposition avec l'acide picrolonique, les traces de cuivre qui sont précipitées électrolytiquement sur le film-support de l'objectif du microscope électronique. Pour vérifier les conditions de la réaction, on s'est servi d'une série d'expériences dont les résultats mettent en valeur les meilleurs procédés. On a d'abord appliqué des quantités de cuivre supérieures à 5 · 10^–9 g, dont les produits de réaction tiennent sur la photographie électronique. Après réductions correspondantes successives des quantités de cuivre, on a pris comme exemple de recherche 1 · 10^–10 g de cuivre et comme limite provisoire du procédé de recherche on a donné 5 · 10^–11 g de cuivre. Sur les images à plus grand agrandissement, on peut montrer la similitude de produits cristallins particulièrement beaux et remarquables.

---

---

Gewidmet zur 100. Wiederkehr des Geburtstages vonFriedrich Emich.     

Transport study of V(V), Zn(II) and Be(II) using supported liquid membranes

V(V), Zn(II) and Be(II) have been studied to test oxine and tri-n-butylphosphate (TBP) as carriers for transport through supported liquid membranes in polypropylene film. All the three types of ions can be passed through such membranes using oxine in case of V(V) and TBP in case of Zn(II) and Be(II). Maximum flux of metal ions has been observed from 0.01M H₂SO₄ for V(V) (3.22·10^–6 mol·m^–2·s^–1) and 2M HCl containing 3M CaCl₂ for Zn(II) solution (1.4·10^–6 mol·m^–2·s^–1). Low flux was observed in case of Be(II) since the membrane was affected by sulphocyanide group and did not remain hydrophobic. Mechanism of transport for these metal ions have been proposed separately. Distribution coefficient data for V(V) have also been evaluated to determine theoretical values of the permeability coefficient, and compared with experimental values.