Comb-shaped 2-Methylimidazolium Poly(arylene ether sulfone) Anion Exchange Membranes with High Alkaline Stability

A series of comb-shaped poly(arylene ether sulfone)s containing pendant 2-methyl-3-alkylimidazolitun group(ImPAES-Cx,x=1,6,10)was prepared and characterized as novel anion exchange membranes.These Im-PAES-Cx membranes were obtained by benzylic bromination and imidazolium functionalization.The characteristic nano-phase separation structure was formed in membranes with longer alkyl side chains,as confmned by small-angle X-ray scattering.The nano-phase separation structures endowed ImPAES-Cx membranes with improved ionic conductivity,dimensional stability(at least 60% decrease water uptake and swelling ratio at 60℃)and mechanical properties,together with excellent alkaline stability.Especially,ImPAES-C6 membranes possessed enhanced hydroxide conductivity and chemical stability simultaneously.These results suggest that it is a feasible strategy to introduce appropriate length of alkyl side chains into anion exchange membranes(AEMs)to improve the performance.     

Anion Exchange Membranes Based on Chloromethylation of Fluorinated Poly(arylene ether)s

This report details the properties of fluorine-containing anion exchange membranes(AEMs) synthesized by chloromethylation and quaternization of fluorinated poly(arylene ether)s(FPAEs) based on decafluorobiphenyl and bisphenol A. Meanwhile, we compared their properties with those of their non-fluorinated counterparts, Udel-based AEMs. The reactivity of the chloromethylation of fluorinated poly(arylene ether)s was lowered by the strong electron-withdrawing group, per-fluorinated biphenyl residue. Therefore higher temperature, more chloromethylation reagent, and longer reaction time were needed in the chloromethylation of FPAEs. Because of the hydrophobicity of fluorine, the swelling of FPAEs was depressed. In the FPAE-based AEMs, the water uptake of FPAE-1 membrane(F-1) was just 30%. There is a strong correlation between water uptake and conductivity for both Udel- and FPAE-based AEMs. Among all the membranes, the water uptake and the conductivity of FPAE-3 membrane(F-3) could reach up to 100% and 13.47 mS/cm respectively at 30 ℃. The mechanical properties of FPAE-based AEMs at room temperature were worse than those of Udel-based ones because of the weak intermolecular interaction caused by the low polarizability of fluorine. However, their high temperature mechanical properties are better, which can be explained in terms of low swelling.     

填充型具有微孔结构的磺化聚芳醚砜/聚醚砜复合质子交换膜的制备及性能

制备了基于磺化聚芳醚砜(SPAES)及聚醚砜(PES)的填充型复合质子交换膜, 研究了其吸水率、 尺寸变化、 热-机械特性、 质子电导率、 甲醇透过性及稳定性等性能. 通过浸入沉淀相转化法, 采用磺化度分别为30%(S30), 40%(S40)及50%(S50)的SPAES与PES制备了系列微孔型复合质子交换膜 Sx-y(x为SPAES的磺化度, y为SPAES的质量分数); 然后利用真空抽滤法在微孔中填充S50制备了相应的填充型复合质子交换膜Sx-y+F50. 结果表明, 由于微孔的引入及皮层结构的存在, Sx-y膜在低离子交换容量(IEC)条件下仍具有较高的电导率、 优良的机械强度、 优异的化学稳定性及较低的甲醇透过性. 经S50填充后, Sx-y+F50膜的IEC及电导率明显提升, 甲醇透过率大幅下降, 但机械强度及化学稳定性未见劣化. 其中S30-40+F50膜(IEC=0.69 mmol/g)的综合性能最佳, 其质子电导率在90 ℃水中达到50.4 mS/cm; 经140 ℃水处理24 h后失重率仅为8.2%, 质子电导率降低仅9%; 经过芬顿试剂(3% H₂O₂, 20 mg/L FeSO₄, 80 ℃, 1 h)处理后失重率仅为0.66%; 甲醇透过率仅为6.8×10^-8 cm²/s.     

交联嵌段磺化聚芳醚砜质子交换膜的制备及性能

为提高磺化聚芳醚砜(SPAES)质子交换膜的质子传导率及稳定性, 制备了一系列交联嵌段SPAES质子交换膜(cbSPAES). 采用嵌段共聚方法, 在P₂O₅存在下, 利用磺酸基团与聚合物主链上活泼氢的脱水反应进行交联改性合成嵌段聚合物. 采用电化学阻抗谱技术测定了cbSPAES膜的质子传导率, 通过测试水中膜平面及厚度方向的尺寸变化率评价膜的尺寸稳定性, 通过加速老化试验评价膜的水解稳定性. 结果表明, 与未交联膜相比, cbSPAES膜的尺寸稳定性及水解稳定性明显提高; 在交联程度相同时, cbSPAES膜的吸水率和质子传导率随着磺化链段长度的增加呈上升的趋势. 如cbSPAES(30/10)-10膜在60 ℃水中的吸水率为65%, 平面方向和厚度方向的尺寸变化率分别为0.16和0.18, 质子传导率达到163 mS/cm.     

自交联型季铵化聚醚砜阴离子交换膜的制备与性能

为改善聚醚砜类阴离子交换膜(QPES)的离子电导率及稳定性,采用3种具有不同长度的脂肪族二胺,即N,N,N',N'-四甲基乙二胺(TMEDA)、N,N,N',N'-四甲基丙二胺(TMPDA)及N,N,N',N'-四甲基己二胺(TMHDA),通过溶液浇铸法制备了一系列自交联型季铵化聚醚砜阴离子交换膜(CQPES).交联膜的抗溶剂性能显著增强,在膜面方向的尺寸稳定性、机械性能、耐水解稳定性及耐碱稳定性均得到了提高,同时离子电导率保持在较高的水平.CQPES膜的性能与二叔胺的结构有较大的关系,以TMHDA为交联剂的CQPES膜离子电导率、耐水解稳定性及耐碱稳定性优于以TMEDA及TMPDA为交联剂的体系.如IEC为1.45 mmol/g的CQPES-H-0.5膜,在30℃时吸水率为43%,尺寸变化率小于10%;在30℃及60℃的水中的电导率分别达到17 m S/cm及64 m S/cm.在稳定性测试方面,CQPES-H-0.5膜经过100℃水处理24 h后重量损失为3.8%,4 mol/L的Na OH溶液室温处理168 h后,离子电导率损失为21%;而相同条件下非交联处理的QPES膜分别为12%及40%.CQPES-H-0.5膜显示了良好的性能,有望在燃料电池系统中得到应用.     

磺化聚芳醚酮砜/ZrO2复合型质子交换膜的制备与性能

通过溶胶-凝胶法制备了纳米ZrO2无机粒子,再通过溶胶共混法制备了不同ZrO2含量的磺化聚芳醚酮砜(SPAEKS)复合膜,红外光谱显示复合膜中存在Zr-O-Zr吸收峰,扫描电镜照片显示纳米ZrO2无机粒子能够均匀地分散在SPAEKS聚合物基体中,未发生团聚现象.通过对复合膜的性能测试发现,纳米ZrO2无机粒子的引入提高...     

新型直接交联磺化聚芳醚砜燃料电池用质子交换膜的合成及性能

以4,4′-二氟二苯砜、4,4′-联苯二酚、3,3′-二磺化-4,4′-二氟二苯砜二钠盐和三羟基苯为原料, 经高温溶液缩聚反应, 制备了一系列不同磺化度的新型交联磺化聚芳醚砜(CSPAES). 利用1H NMR和FTIR对聚合物结构进行表征. 采用溶液浇铸法制备了聚合物膜. 对膜的离子交换容量、吸水率、尺寸变化、机械性能和质子导电率进行了分析. 结果表明, 通过交联处理的磺化聚芳醚砜的水溶胀性明显降低, 当IEC为2.43时, CSPAES膜M(6/4-5)在水中的质子导电率达到260.5 mS/cm, 约为相同条件下Nafion112的2倍.     

复合型季铵化聚醚砜碱性聚合物电解质膜的制备及性能

利用4,4?-二氟二苯砜(DFDPS)、9,9?-双(4-羟苯基)芴(BHPF)、2,2?-二(4-羟基苯基)丙烷(双酚A)及4,4?-(六氟异丙叉)双酚(双酚AF)为原料,制备了2类具有不同主链刚性的聚醚砜材料.以聚醚砜及其氯甲基化产物按一定质量比采用溶液浇铸法,制备了2类新型共混阴离子交换膜,并避免了成膜过程中的相分离现象.在高分子主链上通过引入双酚芴(BQPAES系列)及双酚A(BQPES系列)结构调整主链的刚性,探讨了主链刚性对性能的影响;表征了共混膜的离子交换容量(IEC)、吸水及溶胀特性与离子电导率,并考察了它们的耐水解和耐碱稳定性.结果表明:2种聚合物相容性良好,共混膜质地均一,柔韧透明,吸水率和溶胀率适中,均随着温度的升高逐渐增加、随着聚醚砜含量增加逐渐减小;在90?C时,离子电导率最高达到89 m S/cm.经过沸水处理24 h后,均保持高机械强度,失重率低于5%;经2 mol/L的Na OH溶液30?C处理168~240 h后离子电导率仍可保持65%~80%.由于含双酚芴结构的高分子主链具有更高的刚性,在类似IEC条件下,BQPAES膜显示了比BQPES膜更好的尺寸稳定性和化学稳定性,同时维持了较高的电导率水平.由此表明,复合处理及适度提高高分子主链的刚性,有利于提高膜的性能.     

Low Water Swelling and High Proton Conducting Sulfonated Poly(arylene ether) with Pendant Sulfoalkyl Groups for Proton Exchange Membranes

Novel side‐chain‐type sulfonated poly(arylene ether) with pendant sulfoalkyl group copolymers (PSA‐SPAE‐6F) have been synthesized by direct copolymerization from a new sulfonated monomer, sodium 3‐(4‐(2,6‐difluorobenzoyl)phenyl)propane‐1‐sulfonate. The sulfonate content could be easily controlled by adjusting the sulfonated and the unsulfonated monomer feed ratio. The obtained copolymers all show good thermal and mechanical properties. It should be noted that the most highly sulfonated copolymer, PSA‐SPAE‐6F90 with an ion exchange capacity of 1.30 mequiv · g⁻¹, shows a proton conductivity of 0.11 S · cm⁻¹ and a water swelling ratio of only 12.9% at 100 °C, which indicates its high proton conductivity and excellent dimensional stability in hot water.

     

Preparation of Anion Exchange Membrane Based on Imidazolium Functionalized Poly(arylene ether ketone)

The authors presented a novel synthetic route for the imidazolium functionalized poly(arylene ether ketone)s, derived from an engineering plastics polymer, a poly(arylene ether ketone) with 3,3',5,5'-tetramethyl-4,4'-dihydroxybiphenyl moiety(PAEK-TM). The preparation of anion exchange membranes comprised converting benzylic methyl groups to bromomethyl groups by a radical reaction, followed by the functionalization of bromomethylated PAEK with alkyl imidazoles, i.e., methyl, butyl or vinyl imidazole. The structure of imidazolium functionalized PAEK was proved by ¹H NMR spectra. A class of flexible and tough membranes was then achieved by subsequent film-forming and anion exchange processes. The water uptake and hydroxide conductivities of membranes are comparable or superior to those of quaternary ammonium(QA) anion exchange membranes. This work demonstrated a new route for non-QA anion exchange membrane design, avoiding the chloromethylation reagent and precisely controlling the degree and location of imidazolium groups.     

Novel Crosslinked Alkaline Exchange Membranes Based on Poly(phthalazinone ether ketone) for Anion Exchange Membrane Fuel Cell Applications

Novel crosslinked anion exchange membranes based on poly(phthalazinone ether ketone) (PPEK) were successfully prepared through chloromethylation, quaternization, membrane casting and OH‐ ionic exchange reaction from the quaternized PPEK (QPPEK) membrane. The quaternization was performed with N‐methylimidazolium (MIm) as ammonium agent and tetramethylethylenediamine (TMEDA) as crosslinking agent. The ion‐exchange capacity, swelling ratio (SR), water uptake (WU), and ionic conductivity of the QPPEK alkaline membranes have been systematically investigated. The results showed that QPPEK membranes have a high hydroxide conductivity and very low SR. For the QPPEK‐4 alkaline membrane with ion‐exchange capacity (IEC) 2.63 mmol/g, the WU was 35.8%, and the hydroxide conductivity was 0.028 S/cm at 30 °C and 0.032 S/cm at 70 °C, while its SR was only 7.6%. The thermal properties of the QPPEK alkaline membrane and CMPPEK were characterized using thermo‐gravimetric analysis measurements in a nitrogen atmosphere. The alkaline resistance of membrane QPPEK ?4 was also briefly investigated in 6 M KOH at 60 °C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1632–1638     

序列式含芴季铵化聚芳醚砜阴离子交换膜的制备及交联改性

为得到具有高电导率和稳定性的阴离子交换膜,采用两步聚合法合成了含芴的序列式聚芳醚砜,经付克氯甲基化、季铵化及碱化制备了季铵化聚芳醚砜,并以脂肪族二胺(N,N,N′,N′-四甲基丙二胺(TMPDA)及N,N,N′,N′-四甲基己二胺(TMHDA))为交联剂,通过直接交联及后交联法分别制备了2类序列交联型阴离子交换膜.制得的膜材料离子交换容量为1.59~2.12 mmol/g,柔韧结实.与具有相似离子交换容量的非交联膜相比,交联膜的抗溶剂性能、尺寸稳定性、离子电导率等性能均得到了提高.交联膜在高温水中的水解稳定性、强碱性条件下的化学稳定性显著增强.探讨了直接浇铸交联处理及成膜后交联处理2种交联方式对膜性能的影响,结果表明,后交联处理可以有效避免浇膜过程凝胶的形成,而且膜的稳定性相对于未交联膜有大幅度提高.尤其以TMHDA为交联剂的后交联膜的各项性能均优于相应非交联膜,IEC为2.17 mmol/g的PCL-M(H)膜,在30°C时吸水率为99%,膜径向尺寸变化率为15%,电导率为23.8 mS/cm,90°C时电导率达到82 mS/cm,经过4 mol/L的NaOH溶液室温处理240 h后,离子电导率损失为7.6%,100°C水处理24 h后重量损失为5.1%,表现出较好的稳定性.     

局部密集交联含氟聚芳醚阴离子交换膜的制备与性能

为开发同时具有阴离子传导率高、钒离子渗透率低、机械性能和化学稳定性优异的阴离子交换膜(AEM),本文以逐步缩聚法合成了含叔胺基的含氟聚芳醚(FPAE),然后以十溴丙基柱[5]芳烃(P5Br)作为交联剂,通过P5Br上的溴烷基与FPAE上的叔胺基之间的亲核取代反应进行交联,最后用碘甲烷将剩余叔胺基季铵化,制得一系列局部密集交联含氟聚芳醚阴离子交换膜QAFPAE-P5Br-x.研究结果表明,所有膜在极性非质子溶剂中都具有较高的凝胶含量,证明已形成高效交联结构.随着交联剂含量从0.5%增加到5%,膜的吸水率、溶胀率、阴离子传导率和VO2+透过率逐渐降低,而离子选择性、拉伸强度、面电阻和氧化稳定性逐渐增加.交联剂含量为1%的QAFPAE-P5Br-1%膜同时具有较低的面电阻和VO²⁺透过率,综合性能优异.以QAFPAE-P5Br-1%组装的全钒液流电池(VRFB)在80 mA·cm^?2的电流密度下具有86.5%的能量效率,比以Nafion 212组装的VRFB高出7.7%.另外,以QAFPAE-P5Br-1%组装的VRFB还具有优异的循环稳定性、放电容量保持率和抗自放电性能.可见,局部密集交联是一种提高VRFB用AEM综合性能的有效方法.     

交联型季铵聚芳醚砜阴离子交换膜的制备

采用简便环保的方法制备了具有低溶胀、高离子交换容量(IEC)的交联型季铵聚芳醚砜阴离子交换膜.随着交联度的提高,膜的吸水率和溶胀率降低,说明交联可以抑制膜的溶胀.20℃时所有交联膜的离子传导率均达0.045 S/cm以上,拉伸强度在50.1 MPa以上,表明在高IEC值下,交联膜仍具有良好的力学性能和较高的离子传导能力.同时,交联度提高会加强膜的甲醇阻隔性能.     

磺化聚醚酰亚胺/聚醚砜共混型质子交换膜的制备及其性能

以磺化聚醚酰亚胺(SPEI)和聚醚砜(PES)为原料, 采用溶液共混法成功制备出了SPEI/PES共混型质子交换膜,并经热重分析、AFM、SEM等对膜的结构和性能进行了表征. 结果表明, 共混膜较纯SPEI膜具有更高的热稳定性和较低的溶胀性; 在室温环境下, 共混膜在干态和湿态时均具有优异的机械性能; 与纯SPEI膜相比, 共混膜的形态结构更为致密, 这将有利于降低甲醇的渗透性. 采用交流阻抗法和隔膜扩散法分别考察了膜的质子传导性和阻醇性能, 对于共混质量比为50/50的膜来说, 其质子传导率达到了5.5 mS·cm-1的水平, 能满足质子交换膜的需求, 但其甲醇渗透系数明显降低, 仅为市用Nafion 112膜的5%, 这表明该共混膜有望作为一种新型的直接甲醇燃料电池用质子交换膜.     

磺化聚醚砜/磷酸硼复合质子交换膜的制备与性能

采用sol-gel法成功制备了一系列有望用于高温质子交换膜燃料电池的新型磺化聚醚砜(SPES)/磷酸硼(BPO4)复合膜, 并经热重分析(TGA)-傅立叶变换红外光谱(FTIR)联用技术、差示扫描量热仪(DSC)、扫描电子显微镜(SEM)等对膜的结构和性能进行了表征. 结果表明, 复合膜较纯SPES膜具有更高的热稳定性和玻璃化转变温度, 较低的溶胀性及较高的氧化稳定性; SEM图片显示BPO4在聚合物基体中的分布十分均匀, 这将有利于连续质子传输通道的形成; 复合膜的质子传导率随BPO4含量的增加而增加, 当温度超过120 ℃后, 复合膜仍保持着较高的质子传导率, 这表明该复合膜在高温质子交换膜燃料电池中具有良好的应用前景.     

含(4-磷酸)苯侧基聚芳醚砜的合成及杂化

本文通过含溴聚芳醚砜合成可溶性含(4-磷酸)苯侧基聚芳醚砜, 并通过与磺酸功能化聚倍半硅氧烷杂化的方法, 制备了磷酸聚合物为基体的有机-无机杂化高性能质子交换膜材料.     

质子交换膜用磺化聚芳醚的合成与性能研究

合成了一种用于质子交换膜的新型磺化聚芳醚. 由于特殊单体结构的设计, 在聚合物主链上引入取代基对主链进行保护, 用氯磺酸直接磺化方法在聚芳醚高分子侧基上引入磺酸功能基, 实现了聚合物磺化结构的可控定位合成, 得到了稳定性较好的磺化聚芳醚. 用溶液浇膜法制备了质子交换膜, 考察了质子交换膜的各种性能. 结果表明, 这种膜具有良好的成膜性, 水解性稳定性和优异热稳定性能, 5%的热失重温度为362.3 ℃. 氧化稳定性在80 ℃的Fenton’s试剂(3%的过氧化氢和2 mg/L的FeSO₄)中进行, 膜在69 min时才开始变碎, 表现出良好的氧化稳定性.     

Controlled sulfonation of poly(arylene ether sulfone)s and poly(arylene ether ketone)s with different molecular structures for polymer electrolyte membranes

Poly(arylene ether sulfone) copolymers derived from 9,9-bis(4-hydroxyphenyl)fluorene, bisphenol S and 4,4′-difluorodiphenylsulfone and poly(arylene ether ketone) copolymers derived from 4-phenoxybiphenyl, diphenyl ether and isophthaloyl chloride were prepared as precursor polymers for sulfonation reaction in which sulfonic groups are introduced quantitatively into specified positions. Sulfonation reaction for these two series of copolymers by concentrated sulfuric acid was successfully carried out to give sulfonated polymers with controlled positions and degree of sulfonation. Thermal stability, moisture absorption and proton conductivity for these two series of copolymers were measured and the results were compared to those of perfluorosulfonic acid polymers.     

Sulfonation of Novel Fluorine-containing Poly(arylene ether nitrile)s for Polymer Electrolyte Membranes

Sulfonation reaction of fluorine-containing poly(arylene ether nitrile) derived from 4-phenoxy-2,3,5,6-tetrafluorobenzonitrile (PTFB) and 2,2-bis(4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane (6FBA) by concentrated sulfuric acid at 30°C yielded quantitative introduction of one sulfonic group into phenoxy ring in the polymer at para-position with 68 mol% and at meta-position with 32 mol% due to the influence of fluorines at the ortho-positions of adjacent benzene ring. Membrane properties of the resulting polymer, thermal stability, proton conductivity and water uptake, were investigated for the application in fuel cells. While the membrane derived from the polymer showed similar level of proton conductivity at humidified condition to NAFION®112, its dimensional stability based on water uptake was lower than that of NAFION®112.