Oxidation of Styrene to Benzaldehyde Catalyzed by Schiff Base Functionalized Triazolylidene Ni(II) Complexes

Four new Schiff base functionalized 1,2,3-triazolylidene nickel complexes, [Ni-(L₁NHC)₂](PF₆)₂; 3, [Ni-(L₂NHC)₂](PF₆)₂; 4, [Ni-(L₃NHC)](PF₆)₂; 7 and [Ni-(L₄NHC)](PF₆)₂; 8, (where L₁NHC = (E)-3-methyl-1-propyl-4-(2-(((2-(pyridin-2-yl)ethyl)imino)methyl)phenyl)-1H-1,2,3-triazol-3-ium hexafluorophosphate(V), 1, L₂NHC = (E)-3-methyl-4-(2-((phenethylimino)methyl)phenyl)-1-propyl-1H-1,2,3-triazol-3-ium hexafluorophosphate(V), 2, L₃NHC = 4,4′-(((1E)-(ethane-1,2-diylbis(azanylylidene))bis(methanylylidene))bis(2,1-phenylene))bis(3-methyl-1-propyl-1H-1,2,3-triazol-3-ium) hexafluorophosphate(V), 5, and L₄NHC = 4,4′-(((1E)-(butane-1,4-diylbis(azanylylidene))bis(methanylylidene))bis(2,1-phenylene))bis(3-methyl-1-propyl-1H-1,2,3-triazol-3-ium) hexafluorophosphate(V), 6), were synthesised and characterised by a variety of spectroscopic methods. Square planar geometry was proposed for all the nickel complexes. The catalytic potential of the complexes was explored in the oxidation of styrene to benzaldehyde, using hydrogen peroxide as a green oxidant in the presence of acetonitrile at 80 °C. All complexes showed good catalytic activity with high selectivity to benzaldehyde. Complex 3 gave a conversion of 88% and a selectivity of 70% to benzaldehyde in 6 h. However, complexes 4 and 7–8 gave lower conversions of 48–74% but with higher (up to 90%) selectivity to benzaldehyde. Results from kinetics studies determined the activation energy for the catalytic oxidation reaction as 65 ± 3 kJ/mol, first order in catalyst and fractional order in the oxidant. Results from UV-visible and CV studies of the catalytic activity of the Ni-triazolylidene complexes on styrene oxidation did not indicate any clear possibility of generation of a Ni(II) to Ni(III) catalytic cycle.     

Tuning Photophysical Properties by p-Functional Groups in Zn(II) and Cd(II) Complexes with Piperonylic Acid

Aggregation between discrete molecules is an essential factor to prevent aggregation-caused quenching (ACQ). Indeed, functional groups capable of generating strong hydrogen bonds are likely to assemble and cause ACQ and photoinduced electron transfer processes. Thus, it is possible to compare absorption and emission properties by incorporating two ligands with a different bias toward intra- and intermolecular interactions that can induce a specific structural arrangement. In parallel, the π electron-donor or electron-withdrawing character of the functional groups could modify the Highest Ocuppied Molecular Orbital (HOMO)–Lowest Unocuppied Molecular Orbital (LUMO) energy gap. Reactions of M(OAc)₂·2H₂O (M = Zn(II) and Cd(II); OAc = acetate) with 1,3-benzodioxole-5-carboxylic acid (Piperonylic acid, HPip) and 4-acetylpyridine (4-Acpy) or isonicotinamide (Isn) resulted in the formation of four complexes. The elucidation of their crystal structure showed the formation of one paddle-wheel [Zn(μ-Pip)₂(4-Acpy)]₂ (1); a mixture of one dimer and two monomers [Zn(µ-Pip)(Pip)(Isn)₂]₂·2[Zn(Pip)₂(HPip)(Isn)]·2MeOH (2); and two dimers [Cd(μ-Pip)(Pip)(4-Acpy)₂]₂ (3) and [Cd(μ-Pip)(Pip)(Isn)₂]₂·MeOH (4). They exhibit bridged (1, µ₂-η¹:η¹), bridged, chelated and monodentated (2, µ₂-η¹:η¹, µ₁-η¹:η¹ and µ₁-η¹), or simultaneously bridged and chelated (3 and 4, µ₂-η²:η¹) coordination modes. Zn(II) centers accommodate coordination numbers 5 and 6, whereas Cd(II) presents coordination number 7. We have related their photophysical properties and fluorescence quantum yields with their geometric variations and interactions supported by TD-DFT calculations.     

Dinuclear Lanthanide(III) Complexes from the Use of Methyl 2-Pyridyl Ketoxime: Synthetic,Structural, and Physical Studies

The first use of methyl 2-pyridyl ketoxime (mepaoH) in homometallic lanthanide(III) [Ln(III)] chemistry is described. The 1:2 reactions of Ln(NO₃)₃·nH₂O (Ln = Nd, Eu, Gd, Tb, Dy; n = 5, 6) and mepaoH in MeCN have provided access to complexes [Ln₂(O₂CMe)₄(NO₃)₂(mepaoH)₂] (Ln = Nd, 1; Ln = Eu, 2; Ln = Gd, 3; Ln = Tb, 4; Ln = Dy, 5); the acetato ligands derive from the Ln^III—mediated hydrolysis of MeCN. The 1:1 and 1:2 reactions between Dy(O₂CMe)₃·4H₂O and mepaoH in MeOH/MeCN led to the all-acetato complex [Dy₂(O₂CMe)₆(mepaoH)₂] (6). Treatment of 6 with one equivalent of HNO₃ gave 5. The structures of 1, 5, and 6 were solved by single-crystal X-ray crystallography. Elemental analyses and IR spectroscopy provide strong evidence that 2–4 display similar structural characteristics with 1 and 5. The structures of 1–5 consist of dinuclear molecules in which the two Ln^III centers are bridged by two bidentate bridging (η¹:η¹:μ₂) and two chelating-bridging (η¹:η²:μ₂) acetate groups. The Ln^III atoms are each chelated by a N,N’-bidentate mepaoH ligand and a near-symmetrical bidentate nitrato group. The molecular structure of 6 is similar to that of 5, the main difference being the presence of two chelating acetato groups in the former instead of the two chelating nitrato groups in the latter. The geometry of the 9-coordinate Ln^III centers in 1, 5 and 6 can be best described as a muffin-type (MFF-9). The 3D lattices of the isomorphous 1 and 5 are built through H-bonding, π⋯π stacking and C-H⋯π interactions, while the 3D architecture of 6 is stabilized by H bonds. The IR spectra of the complexes are discussed in terms of the coordination modes of the organic and inorganic ligands involved. The Eu(III) complex 2 displays a red, metal-ion centered emission in the solid state; the Tb^III atom in solid 4 emits light in the same region with the ligand. Magnetic susceptibility studies in the 2.0–300 K range reveal weak antiferromagnetic intramolecular Gd^III…Gd^III exchange interactions in 3; the J value is −0.09(1) cm⁻¹ based on the spin Hamiltonian Ĥ = −J(Ŝ_Gd1·Ŝ_Gd2).     

Proposed Mechanism for the Antitrypanosomal Activity of Quercetin and Myricetin Isolated from Hypericum afrum Lam.: Phytochemistry,In Vitro Testing and Modeling Studies

The in vitro activity of L. donovani (promastigotes, axenic amastigotes and intracellular amastigotes in THP1 cells) and T. brucei, from the fractions obtained from the hydroalcoholic extract of the aerial part of Hypericum afrum and the isolated compounds, has been evaluated. The chloroform, ethyl acetate and n-butanol extracts showed significant antitrypanosomal activity towards T. brucei, with IC₅₀ values of 12.35, 13.53 and 12.93 µg/mL and with IC₉₀ values of 14.94, 19.31 and 18.67 µg/mL, respectively. The phytochemical investigation of the fractions led to the isolation and identification of quercetin (1), myricitrin (2), biapigenin (3), myricetin (4), hyperoside (5), myricetin-3-O-β-d-galactopyranoside (6) and myricetin-3’-O-β-d-glucopyranoside (7). Myricetin-3’-O-β-d-glucopyranoside (7) has been isolated for the first time from this genus. The chemical structures were elucidated by using comprehensive one- and two-dimensional nuclear magnetic resonance (1D and 2D NMR) spectroscopic data, as well as high-resolution electrospray ionization mass spectrometry (HR-ESI–MS). These compounds have also been evaluated for their antiprotozoal activity. Quercetin (1) and myricetin (4) showed noteworthy activity against T. brucei, with IC₅₀ and IC₉₀ values of 7.52 and 5.71 µM, and 9.76 and 7.97 µM, respectively. The T. brucei hexokinase (TbHK1) enzyme was further explored as a potential target of quercetin and myricetin, using molecular modeling studies. This proposed mechanism assists in the exploration of new candidates for novel antitrypanosomal drugs.     

Synthesis,Antitumor and Antibacterial Studies of New Shortened Analogues of (KLAKLAK)2-NH2 and Their Conjugates Containing Unnatural Amino Acids

(1) Background: (KLAKLAK)₂ is a representative of the antimicrobial peptide group which also shows good anticancer properties. (2) Methods: Herein, we report synthesis using SPPS and characterization by HPLC/MS of a series of shortened analogues of (KLAKLAK)₂. They contain single sequence KLAKLAK as C-terminal amides. In addition, substitution of some natural amino acids with unnatural β-Ala and nor-Leu is realized. In addition, these structures are conjugated with second pharmacophore with well proven anticancer properties 1,8-naphthalimide or caffeic acid. Cytotoxicity, antiproliferative effect and antimicrobial activity of newly synthesized structures were studied. (3) Results: The obtained experimental results reveal significant selective index for substances with common chemical structure KLβAKLβAK-NH₂. The antibacterial properties of newly synthesized analogues at two different concentrations 10 μM and 20 μM, were tested against Gram-negative microorganisms Escherichia coli K12 407. Only two of the studied compounds KLAKLAK-NH₂ and the one conjugated with second pharmacophore 1,8-naphthalimide and unnatural amino acid nor-Leu showed moderate activity against tested strains at concentration of 20 μM. (4) Conclusions: The obtained results reveal that the introducing of 1,8-naphthalimideGly- and Caf- increase the cytotoxicity and antiproliferative activity of the peptides but not their selectivity. Only two compounds KLAKLAK-NH₂ and 1,8-naphthalimideGKnLAKnLAK-NH₂ show moderate activity against Escherichia coli K12 at low concentration of 20 μM.     

Mono- and Binuclear Copper(II) and Nickel(II) Complexes with the 3,6-Bis(picolylamino)-1,2,4,5-Tetrazine Ligand

Four new compounds of formulas [Cu(hfac)₂(L)] (1), [Ni(hfac)₂(L)] (2), [{Cu(hfac)₂}₂(µ-L)]·2CH₃OH (3) and [{Ni(hfac)₂}₂(µ-L)]·2CH₃CN (4) [Hhfac = hexafluoroacetylacetone and L = 3,6-bis(picolylamino)-1,2,4,5-tetrazine] have been prepared and their structures determined by X-ray diffraction on single crystals. Compounds 1 and 2 are isostructural mononuclear complexes where the metal ions [copper(II) (1) and nickel(II) (2)] are six-coordinated in distorted octahedral MN₂O₄ surroundings which are built by two bidentate hfac ligands plus another bidentate L molecule. This last ligand coordinates to the metal ions through the nitrogen atoms of the picolylamine fragment. Compounds 3 and 4 are centrosymmetric homodinuclear compounds where two bidentate hfac units are the bidentate capping ligands at each metal center and a bis-bidentate L molecule acts as a bridge. The values of the intramolecular metal···metal separation are 7.97 (3) and 7.82 Å (4). Static (dc) magnetic susceptibility measurements were carried out for polycrystalline samples 1–4 in the temperature range 1.9–300 K. Curie law behaviors were observed for 1 and 2, the downturn of χ_MT in the low temperature region for 2 being due to the zero-field splitting of the nickel(II) ion. Very weak [J = −0.247(2) cm⁻¹] and relatively weak intramolecular antiferromagnetic interactions [J = −4.86(2) cm⁻¹] occurred in 3 and 4, respectively (the spin Hamiltonian being defined as H = −JS₁·S₂). Simple symmetry considerations about the overlap between the magnetic orbitals across the extended bis-bidentate L bridge in 3 and 4 account for their magnetic properties.     

Crystallography,Molecular Modeling,and COX-2 Inhibition Studies on Indolizine Derivatives

The cyclooxygenase-2 (COX-2) enzyme is an important target for drug discovery and development of novel anti-inflammatory agents. Selective COX-2 inhibitors have the advantage of reduced side-effects, which result from COX-1 inhibition that is usually observed with nonselective COX inhibitors. In this study, the design and synthesis of a new series of 7-methoxy indolizines as bioisostere indomethacin analogues (5a–e) were carried out and evaluated for COX-2 enzyme inhibition. All the compounds showed activity in micromolar ranges, and the compound diethyl 3-(4-cyanobenzoyl)-7-methoxyindolizine-1,2-dicarboxylate (5a) emerged as a promising COX-2 inhibitor with an IC₅₀ of 5.84 µM, as compared to indomethacin (IC₅₀ = 6.84 µM). The molecular modeling study of indolizines indicated that hydrophobic interactions were the major contribution to COX-2 inhibition. The title compound diethyl 3-(4-bromobenzoyl)-7-methoxyindolizine-1,2-dicarboxylate (5c) was subjected for single-crystal X-ray studies, Hirshfeld surface analysis, and energy framework calculations. The X-ray diffraction analysis showed that the molecule (5c) crystallizes in the monoclinic crystal system with space group P 2₁/n with a = 12.0497(6)Å, b = 17.8324(10)Å, c = 19.6052(11)Å, α = 90.000°, β = 100.372(1)°, γ = 90.000°, and V = 4143.8(4)ų. In addition, with the help of Crystal Explorer software program using the B3LYP/6-31G(d, p) basis set, the theoretical calculation of the interaction and graphical representation of energy value was measured in the form of the energy framework in terms of coulombic, dispersion, and total energy.     

Syntheses and structures of doubly tucked-in titanocene complexes with tetramethyl(aryl)cyclopentadienyl ligands

Titanocene–bis(trimethylsilyl)ethyne complexes [Ti(η⁵-C₅Me₄R)₂(η²-Me₃SiCCSiMe₃)], where R=benzyl (Bz, 1a), phenyl (Ph, 1b) and p-fluorophenyl (FPh, 1c), thermolyse at 150–160°C to give products of double C---H activation [Ti(η⁵-C₅Me₄Bz){η³:η⁴-C₅Me₃(CH₂)(CHPh)}] (2a), [Ti(η⁵-C₅Me₄Bz){η³:η⁴-C₅Me₂Bz(CH₂)₂}] (2a′), [Ti(η⁵-C₅Me₄Ph){η³:η⁴-C₅Me₂Ph(CH₂)₂}] (2b), and [Ti(η⁵-C₅Me₄FPh){η³:η⁴-C₅Me₂FPh(CH₂)₂}] (2c). In the presence of 2,2,7,7-tetramethylocta-3,5-diyne (TMOD) the thermolysis affords analogous doubly tucked-in compounds bearing one η³:η⁴-allyldiene and one η⁵-C₅Me₄R ligand having TMOD attached by its C-3 and C-6 carbon atoms to the vicinal methylene groups adjacent to the substituent R (R=Bz (3a), Ph (3b), and FPh (3c)). Compound 3a is smoothly converted into air-stable titanocene dichloride [TiCl₂{η⁵-C₅Me₂Bz(CH₂CH(t-Bu)CH=CHCH(t-Bu)CH₂)}(η⁵-C₅Me₄Bz)] (4a) by a reaction with hydrogen chloride. Yields in both series of doubly tucked-in complexes decrease in the order of substituents: BzPh>FPh. Crystal structures of 1c, 2a, 2b, and 3b have been determined.     

A Cd(II) Luminescent Coordination Grid as a Multiresponsive Fluorescence Sensor for Cr(VI) Oxyanions and Cr(III), Fe(III), and Al(III) in Aqueous Medium

Hydro(solvo)thermal reactions of Cd(NO₃)₂, N-(pyridin-3-ylmethyl)-4-(pyridin-4-yl)-1,8-naphthalimide (NI-mbpy-34), and 5-bromobenzene-1,3-dicarboxylic acid (Br-1,3-H₂bdc) afforded a luminescent coordination polymer, {[Cd(Br-1,3-bdc)(NI-mbpy-34)(H₂O)]∙2H₂O}_n (1). Single-crystal X-ray diffraction analysis showed that 1 features a two-dimensional (2-D) gridlike sql layer with the point symbol of (4⁴·6²), where the Cd(II) center adopts a {CdO₅N₂} pentagonal bipyramidal geometry. Thermogravimetric (TG) analysis confirmed the thermal stability of 1 up to about 340 °C, whereas XRPD patterns proved the maintenance of crystallinity and framework integrity of 1 in CH₂Cl₂, H₂O, CH₃OH, and toluene. Photoluminescence studies indicated that 1 displayed intense blue fluorescence emissions in both solid-state and H₂O suspension-phase. Owing to the good fluorescent properties, 1 could serve as an excellent turn-off fluorescence sensor for selective and sensitive Cr(VI) detection in water, with LOD = 15.15 μM for CrO₄²⁻ and 14.91 μM for Cr₂O₇²⁻, through energy competition absorption mechanism. In addition, 1 could also sensitively detect Cr³⁺, Fe³⁺, and Al³⁺ ions in aqueous medium via fluorescence-enhancement responses, with LOD = 2.81 μM for Cr³⁺, 3.82 μM for Fe³⁺, and 3.37 μM for Al³⁺, mainly through an absorbance-caused enhancement (ACE) mechanism.     

Exploring Amantadine Derivatives as Urease Inhibitors: Molecular Docking and Structure–Activity Relationship (SAR) Studies

This article describes the design and synthesis of a series of novel amantadine-thiourea conjugates (3a–j) as Jack bean urease inhibitors. The synthesized hybrids were assayed for their in vitro urease inhibition. Accordingly, N-(adamantan-1-ylcarbamothioyl)octanamide (3j) possessing a 7-carbon alkyl chain showed excellent activity with IC₅₀ value 0.0085 ± 0.0011 µM indicating that the long alkyl chain plays a vital role in enzyme inhibition. Whilst N-(adamantan-1-ylcarbamothioyl)-2-chlorobenzamide (3g) possessing a 2-chlorophenyl substitution was the next most efficient compound belonging to the aryl series with IC₅₀ value of 0.0087 ± 0.001 µM. The kinetic mechanism analyzed by Lineweaver–Burk plots revealed the non-competitive mode of inhibition for compound 3j. Moreover, in silico molecular docking against target protein (PDBID 4H9M) indicated that most of the synthesized compounds exhibit good binding affinity with protein. The compound 3j forms two hydrogen bonds with amino acid residue VAL391 having a binding distance of 1.858 Å and 2.240 Å. The interaction of 3j with amino acid residue located outside the catalytic site showed its non-competitive mode of inhibition. Based upon these results, it is anticipated that compound 3j may serve as a lead structure for the design of more potent urease inhibitors.     

Copper(II)-Mediated Iodination of 1-Nitroso-2-naphthol

The 3-Iodo-1-nitrosonaphthalene-2-ol (I-NON) was obtained by the copper(II)-mediated iodination of 1-nitroso-2-naphthol (NON). The suitable reactants and optimized reaction conditions, providing 94% NMR yield of I-NON, included the usage of Cu(OAc)₂·H₂O and 1:2:8 Cu^II/NON/I₂ molar ratio between the reactants. The obtained I-NON was characterized by elemental analyses (C, H, N), high-resolution ESI⁺-MS, ¹H and ¹³C{¹H} NMR, FTIR, UV-vis spectroscopy, TGA, and X-ray crystallography (XRD). The copper(II) complexes bearing deprotonated I-NON were prepared as follows: cis-[Cu(I-NON–H)(I-NON)](I₃) (1) was obtained by the reaction between Cu(NON-H)₂ and I₂ in CHCl₃/MeOH, while trans-[Cu(I-NON–H)₂] (2) was synthesized from I-NON and Cu(OAc)₂ in MeOH. Crystals of trans-[Cu(I-NON–H)₂(THF)₂] (3) and trans-[Cu(I-NON–H)₂(Py)₂] (4) were precipitated from solutions of 2 in CHCl₃/THF and Py/CHCl₃/MeOH mixtures, respectively. The structures of 1 and 3–4 were additionally verified by X-ray crystallography. The characteristic feature of the structures of 1 and 3 is the presence of intermolecular halogen bonds with the involvement of the iodine center of the metal-bound deprotonated I-NON. The nature of the I···I and I···O contacts in the structures of 1 and 3, correspondingly, were studied theoretically at the DFT (PBE0-D3BJ) level using the QTAIM, ESP, ELF, NBO, and IGM methods.     

Aromatizational rhodiation of 1-cyciopentadienylidene4-methyl-4-trichloromethylcyclohexa-2,5-diene under the action of (Ph3P)3Rh(CO)H and (C2H4)2Rh(acac) as a novel route top-tolylcyclopentadienyl complexes of transition metals

Condensation of 4-methyl-4-trichloromethylcyclohexa-2,5-dienone with cyclopentadiene gave the first representative of cross-conjugated pentafulvenes of the para-semiquinoid series: 1-cyclopentadienylidene-4-methyl-4-trichloromethylcyclohexa-2,5-diene. This fulvene undergoes a novel redox aromatizational skeletal rearrangement under the action of (Ph₃P)₃Rh(CO)H and (C₂H₄)₂Rh(acac) to give triphenylphosphinetn5-(p-tolylcyclopentadienyl)jdichlororhodium and bis[(⁵-p-tolylcyclopentadienyl)(w-chloro)chlororhodium], respectively.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 2098–2100, August, 1996.     

A series of novel 2,6-bis(imino)pyridyl iron catalysts: synthesis, characterization and ethylene oligomerization

A series of novel 2,6-bis(imino)pyridyl iron complexes {2,6-(2-X-4-Y-5-ZC₆H₂NCCH₃)₂C₅H₃N}FeCl₂ (X = Cl, Y = CH₃, Z = H (2); X = Br, Y = CH₃, Z = H (3); X = F, Y = H, Z = CH₃ (4); X = Cl, Y = H, Z = CH₃ (5); X = Cl, Y = F (7)) have been synthesized and characterized with elemental analysis and IR. These iron coordinative complexes, activated with methylaluminoxane (MAO), lead to highly active ethylene oligomerization (>10⁷ g/mol Fe h) and the products are mostly linear α-olefins (>90%). The catalytic activities and product properties depend on the substituents on aryl rings and the reaction conditions. As reaction temperature increases, the catalytic activities decrease rapidly and more low-molar-mass products are produced. The product distributions are almost independent of the Al/Fe molar ratio, but the catalytic activities change in different trends when the ortho-substituents on the aryl rings are different. The other three complexes have also been synthesized for comparison to investigate the steric hindrance and electronic effect on the properties of complexes. The complex with adaptable steric hindrance and electronic properties exhibits the highest catalytic activities.     

Structure Controlling Factors of Oxido-Bridged Dinuclear Iron(III) Complexes

Oxido bridges commonly form between iron(III) ions, but their bond angles and symmetry vary with the circumstances. A large number of oxido-bridged dinuclear iron(III) complexes have been structurally characterized. Some of them belong to the C₂ point group, possessing bent Fe–O–Fe bonds, while some others belong to the C_i symmetry, possessing the linear Fe–O–Fe bonds. The question in this study is what determines the structures and symmetry of oxido-bridged dinuclear iron(III) complexes. In order to gain further insights, three oxido-bridged dinuclear iron(III) complexes were newly prepared with 2,2′-bipyridine (bpy) and 1,10-phenanthroline (phen) ligands: [Fe₂OCl₂(bpy)₄][PF₆]₂ (1), [Fe₂O(NO₃)₂(bpy)₄][PF₆]₂·0.6MeCN·0.2(2-PrOH) (2), and [Fe₂OCl₂(phen)₄][PF₆]₂·MeCN·0.5H₂O (3). The crystal structures of 1, 2, and 3 were determined by the single-crystal X-ray diffraction method, and all of them were found to have the bent Fe–O–Fe bonds. Judging from the crystal structure, some intramolecular interligand hydrogen bonds were found to play an important role in fixing the structures. Additional density functional theory (DFT) calculations were conducted, also for a related oxido-bridged dinuclear iron(III) complex with a linear Fe–O–Fe bond. We conclude that the Fe–O–Fe bridge tends to bend like a water molecule, but is often stretched by interligand steric repulsion, and that the structures are mainly controlled by the intramolecular interligand interactions.     

A Review of Manganese(III) (Oxyhydr)Oxides Use in Advanced Oxidation Processes

The key role of trivalent manganese (Mn(III)) species in promoting sulfate radical-based advanced oxidation processes (SR-AOPs) has recently attracted increasing attention. This review provides a comprehensive summary of Mn(III) (oxyhydr)oxide-based catalysts used to activate peroxymonosulfate (PMS) and peroxydisulfate (PDS) in water. The crystal structures of different Mn(III) (oxyhydr)oxides (such as α-Mn₂O₃, γ-MnOOH, and Mn₃O₄) are first introduced. Then the impact of the catalyst structure and composition on the activation mechanisms are discussed, as well as the effects of solution pH and inorganic ions. In the Mn(III) (oxyhydr)oxide activated SR-AOPs systems, the activation mechanisms of PMS and PDS are different. For example, both radical (such as sulfate and hydroxyl radical) and non-radical (singlet oxygen) were generated by Mn(III) (oxyhydr)oxide activated PMS. In comparison, the activation of PDS by α-Mn₂O₃ and γ-MnOOH preferred to form the singlet oxygen and catalyst surface activated complex to remove the organic pollutants. Finally, research gaps are discussed to suggest future directions in context of applying radical-based advanced oxidation in wastewater treatment processes.     

Bioactive Abietane-Type Diterpenoid Glycosides from Leaves of Clerodendrum infortunatum (Lamiaceae)

In this study, two previously undescribed diterpenoids, (5R,10S,16R)-11,16,19-trihydroxy-12-O-β-d-glucopyranosyl-(1→2)-β-d-glucopyranosyl-17(15→16),18(4→3)-diabeo-3,8,11,13-abietatetraene-7-one (1) and (5R,10S,16R)-11,16-dihydroxy-12-O-β-d-glucopyranosyl-(1→2)-β-d-glucopyranosyl-17(15→16),18(4→3)-diabeo-4-carboxy-3,8,11,13-abietatetraene-7-one (2), and one known compound, the C₁₃-nor-isoprenoid glycoside byzantionoside B (3), were isolated from the leaves of Clerodendrum infortunatum L. (Lamiaceae). Structures were established based on spectroscopic and spectrometric data and by comparison with literature data. The three terpenoids, along with five phenylpropanoids: 6′-O-caffeoyl-12-glucopyranosyloxyjasmonic acid (4), jionoside C (5), jionoside D (6), brachynoside (7), and incanoside C (8), previously isolated from the same source, were tested for their in vitro antidiabetic (α-amylase and α-glucosidase), anticancer (Hs578T and MDA-MB-231), and anticholinesterase activities. In an in vitro test against carbohydrate digestion enzymes, compound 6 showed the most potent effect against mammalian α-amylase (IC₅₀ 3.4 ± 0.2 μM) compared to the reference standard acarbose (IC₅₀ 5.9 ± 0.1 μM). As yeast α-glucosidase inhibitors, compounds 1, 2, 5, and 6 displayed moderate inhibitory activities, ranging from 24.6 to 96.0 μM, compared to acarbose (IC₅₀ 665 ± 42 μM). All of the tested compounds demonstrated negligible anticholinesterase effects. In an anticancer test, compounds 3 and 5 exhibited moderate antiproliferative properties with IC₅₀ of 94.7 ± 1.3 and 85.3 ± 2.4 μM, respectively, against Hs578T cell, while the rest of the compounds did not show significant activity (IC₅₀ > 100 μM).     

Synthesis,Structure, and Photophysical Properties of Yellow-Green and Blue Photoluminescent Dinuclear and Octanuclear Copper(I) Iodide Complexes with a Disilanylene-Bridged Bispyridine Ligand

The synthesis, structural, and photophysical investigations of CuI complexes with a disilanylene-bridged bispyridine ligand 1 are herein presented. Dinuclear (2) and ladder-like (3) octanuclear copper(I) complexes were straightforwardly prepared by exactly controlling the ratio of CuI/ligand 1. Single-crystal X-ray analysis confirmed that dinuclear complex 2 had no apparent π…π stacking whereas octanuclear complex 3 had π…π stacking in the crystal packing. In the solid state, the complexes display yellow-green (λ_em = 519 nm, Φ = 0.60, τ = 11 µs, 2) and blue (λ_em = 478 nm, Φ = 0.04, τ = 2.6 µs, 3) phosphorescence, respectively. The density functional theory calculations validate the differences in their optical properties. The difference in the luminescence efficiency between 2 and 3 is attributed to the presence of π…π stacking and the different luminescence processes.