A Core–Shell Fe/Fe2O3 Nanowire as a High‐Performance Anode Material for Lithium‐Ion Batteries

The preparation of novel one‐dimensional core–shell Fe/Fe₂O₃ nanowires as anodes for high‐performance lithium‐ion batteries (LIBs) is reported. The nanowires are prepared in a facile synthetic process in aqueous solution under ambient conditions with subsequent annealing treatment that could tune the capacity for lithium storage. When this hybrid is used as an anode material for LIBs, the outer Fe₂O₃ shell can act as an electrochemically active material to store and release lithium ions, whereas the highly conductive and inactive Fe core functions as nothing more than an efficient electrical conducting pathway and a remarkable buffer to tolerate volume changes of the electrode materials during the insertion and extraction of lithium ions. The core–shell Fe/Fe₂O₃ nanowire maintains an excellent reversible capacity of over 767 mA h g^?1 at 500 mA g^?1 after 200 cycles with a high average Coulombic efficiency of 98.6 %. Even at 2000 mA g^?1, a stable capacity as high as 538 mA h g^?1 could be obtained. The unique composition and nanostructure of this electrode material contribute to this enhanced electrochemical performance. Due to the ease of large‐scale fabrication and superior electrochemical performance, these hybrid nanowires are promising anode materials for the next generation of high‐performance LIBs.     

The Art of Framework Construction: Core–Shell Structured Micro-Energetic Materials

Weak interfacial interactions remain a bottleneck for composite materials due to their weakened performance and restricted applications. The development of core–shell engineering shed light on the preparation of compact and intact composites with improved interfacial interactions. This review addresses how core–shell engineering has been applied to energetic materials, with emphasis upon how micro-energetic materials, the most widely used particles in the military field, can be generated in a rational way. The preparation methods of core–shell structured explosives (CSEs) developed in the past few decades are summarized herein. Case studies on polymer-, explosive- and novel materials-based CSEs are presented in terms of their compositions and physical properties (e.g., thermal stability, mechanical properties and sensitivity). The mechanisms behind the dramatic and divergent properties of CSEs are also clarified. A glimpse of the future in this area is given to show the potential for CSEs and some suggestions regarding the future research directions are proposed.     

Sulfur‐Impregnated Core–Shell Hierarchical Porous Carbon for Lithium–Sulfur Batteries

Core–shell hierarchical porous carbon spheres (HPCs) were synthesized by a facile hydrothermal method and used as host to incorporate sulfur. The microstructure, morphology, and specific surface areas of the resultant samples have been systematically characterized. The results indicate that most of sulfur is well dispersed over the core area of HPCs after the impregnation of sulfur. Meanwhile, the shell of HPCs with void pores is serving as a retard against the dissolution of lithium polysulfides. This structure can enhance the transport of electron and lithium ions as well as alleviate the stress caused by volume change during the charge–discharge process. The as‐prepared HPC‐sulfur (HPC‐S) composite with 65.3 wt % sulfur delivers a high specific capacity of 1397.9 mA h g^?1 at a current density of 335 mA g^?1 (0.2 C) as a cathode material for lithium–sulfur (Li‐S) batteries, and the discharge capacity of the electrode could still reach 753.2 mA h g^?1 at 6700 mA g^?1 (4 C). Moreover, the composite electrode exhibited an excellent cycling capacity of 830.5 mA h g^?1 after 200 cycles.     

Facile Synthesis of Ge@C Core–Shell Nanocomposites for High‐Performance Lithium Storage in Lithium‐Ion Batteries

Herein, we report a facile and “green” synthetic route for the preparation of Ge@C core–shell nanocomposites by using a low‐cost Ge precursor. Field‐emission scanning electron microscopy and transmission electron microscopy analyses confirmed the core–shell nanoarchitecture of the Ge@C nanocomposites, with particle sizes ranging from 60 to 100 nm. Individual Ge nanocrystals were coated by a continuous carbon layer, which had an average thickness of 2 nm. When applied as an anode materials for lithium‐ion batteries, the Ge@C nanocomposites exhibited a high initial discharge capacity of 1670 mAh g^?1 and superior rate capability. In particular, Ge@C nanocomposite electrodes maintained a reversible capacity of 734 mAh g^?1 after repeated cycling at a current density of 800 mA g^?1 over 100 cycles.     

MnO@Carbon Core–Shell Nanowires as Stable High‐Performance Anodes for Lithium‐Ion Batteries

A facile method is presented for the large‐scale preparation of rationally designed mesocrystalline MnO@carbon core–shell nanowires with a jointed appearance. The nanostructures have a unique arrangement of internally encapsulated highly oriented and interconnected MnO nanorods and graphitized carbon layers forming an external coating. Based on a comparison and analysis of the crystal structures of MnOOH, Mn₂O₃, and MnO@C, we propose a sequential topotactic transformation of the corresponding precursors to the products. Very interestingly, the individual mesoporous single‐crystalline MnO nanorods are strongly interconnected and maintain the same crystallographic orientation, which is a typical feature of mesocrystals. When tested for their applicability to Li‐ion batteries (LIB), the MnO@carbon core–shell nanowires showed excellent capacity retention, superior cycling performance, and high rate capability. Specifically, the MnO@carbon core–shell nanostructures could deliver reversible capacities as high as 801 mA h g^?1 at a high current density of 500 mA g^?1, with excellent electrochemical stability after testing over 200 cycles, indicating their potential application in LIBs. The remarkable electrochemical performance can mainly be attributed to the highly uniform carbon layer around the MnO nanowires, which is not only effective in buffering the structural strain and volume variations of anodes during repeated electrochemical reactions, but also greatly enhances the conductivity of the electrode material. Our results confirm the feasibility of using these rationally designed composite materials for practical applications. The present strategy is simple but very effective, and appears to be sufficiently versatile to be extended to other high‐capacity electrode materials with large volume variations and low electrical conductivities.     

二维配位聚合物衍生的氮掺杂碳/氧化锌纳米复合材料作为高性能的锂离子电池负极材料

通过一步煅烧二维锌基配位聚合物[Zn(tfbdc)(4,4′-bpy)(H_2O)_2](H_2tfbdc=四氟对苯二甲酸;4,4′-bpy=4,4′-联吡啶),制备了氮掺杂碳/氧化锌复合纳米粒子(ZnO-N-C)。作为锂离子电池的负极材料,ZnO-N-C电极具有高的可逆容量,优异的循环稳定性和较好的倍率性能。在50 mA·g~(-1)的电流密度下,50次循环后ZnO-N-C电极仍有611 mAh·g~(-1)的可逆容量。     

Engineering the Mesopores of Fe3O4@Mesosilica Core–Shell Nanospheres through a Solvothermal Post‐Treatment Method

A solvothermal post‐treatment method was developed to synthesize Fe₃O₄@mesosilica core–shell nanospheres (CSNs) with a well‐preserved morphology, mesoporous structure, and tunable large pore diameters (2.5–17.6 nm) for the first time. N,N‐Dimethylhexadecylamine (DMHA), which was generated in situ during the heat‐treatment process, was mainly responsible for this pore‐size enlargement, as characterized by NMR spectroscopy. This pore‐size expansion can be strengthened with the aid of hexamethyldisilazane (HMDS), whilst the nature of the surface of the Fe₃O₄@mesosilica CSNs can be easily modified with trimethylsilyl groups during the pore‐size‐expansion process. The hydrophobicity of the Fe₃O₄@mesosilica CSNs increased for the enlarged mesopores and the adsorption capacity of these CSNs for benzene (up to 1.5 g g^?1) is the highest ever reported for Fe₃O₄@mesosilica CSNs. The resultant Fe₃O₄@mesosilica CSNs (pore size: 10 nm) showed a 3.6‐times higher adsorption capacity of lysozyme than those without the pore expansion (pore size: 2.5 nm), thus making them a good candidate for loading large molecules.     

Synthesis and Characterization of Core‐Shell Selenium/Carbon Colloids and Hollow Carbon Capsules

A novel Se/C nanocomposite with core‐shell structures has been prepared through a facile one‐pot microwave‐induced hydrothermal process. The new material consists of a trigonal‐Se (t‐Se) core and an amorphous‐C (a‐C) shell. The Se/C composite can be converted to hollow carbon capsules by thermal treatment. These products were characterized by transmission electron microscopy (TEM), powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), selected area electron diffraction (SAED), energy‐dispersive X‐ray (EDX) spectroscopy, and X‐ray photoelectron spectroscopy (XPS).     

Synergistic Effect of SnO2/ZnWO4 Core–Shell Nanorods with High Reversible Lithium Storage Capacity

High reversible lithium storage capacity is obtained from novel SnO₂/ZnWO₄ core–shell nanorods. At C/20 (20 h per half cycle) rate, the reversible capacity of SnO₂/ZnWO₄ core–shell nanorods is as high as 1000 mAh g^?1, much higher than that of pure ZnWO₄, SnO₂, or the traditional theoretical result of the simple mixture. Such performance can be attributed to the synergistic effect between the nanostructured SnO₂ and ZnWO₄. The distinct electrochemical activity of ZnWO₄ nanorods probably activates the irreversible capacity of the SnO₂ nanoparticles. These results indicate that high‐performance lithium ion batteries can be realized by introducing the synergistic effect of one‐dimensional core–shell nanocomposites.     

Core–Shell Carbon‐Coated CuO Nanocomposites: A Highly Stable Electrode Material for Supercapacitors and Lithium‐Ion Batteries

Herein we present a simple method for fabricating core–shell mesostructured CuO@C nanocomposites by utilizing humic acid (HA) as a biomass carbon source. The electrochemical performances of CuO@C nanocomposites were evaluated as an electrode material for supercapacitors and lithium‐ion batteries. CuO@C exhibits an excellent capacitance of 207.2 F g^?1 at a current density of 1 A g^?1 within a potential window of 0–0.46 V in 6 M KOH solution. Significantly, CuO electrode materials achieve remarkable capacitance retentions of approximately 205.8 F g^?1 after 1000 cycles of charge/discharge testing. The CuO@C was further applied as an anode material for lithium‐ion batteries, and a high initial capacity of 1143.7 mA h g^?1 was achieved at a current density of 0.1 C. This work provides a facile and general approach to synthesize carbon‐based materials for application in large‐scale energy‐storage systems.     

Formation of Triple‐Shelled Molybdenum–Polydopamine Hollow Spheres and Their Conversion into MoO2/Carbon Composite Hollow Spheres for Lithium‐Ion Batteries

Unique triple‐shelled Mo‐polydopamine (Mo‐PDA) hollow spheres are synthesized through a facile solvothermal process. A sequential self‐templating mechanism for the multi‐shell formation is proposed, and the number of shells can be adjusted by tuning the size of the Mo‐glycerate templates. These triple‐shelled Mo‐PDA hollow spheres can be converted to triple‐shelled MoO₂/carbon composite hollow spheres by thermal treatment. Owing to the unique multi‐shells and hollow interior, the as‐prepared MoO₂/carbon composite hollow spheres exhibit appealing performance as an anode material for lithium‐ion batteries, delivering a high capacity of ca. 580 mAh g^?1 at 0.5 A g^?1 with good rate capability and long cycle life.     

Co3O4 Hollow Nanoparticles Embedded in Mesoporous Walls of Carbon Nanoboxes for Efficient Lithium Storage

Confining nanostructured electrode materials in porous carbon represents an effective strategy for improving the electrochemical performance of lithium-ion batteries. Herein, we report the design and synthesis of hybrid hollow nanostructures composed of highly dispersed Co₃O₄ hollow nanoparticles (sub-20 nm) embedded in the mesoporous walls of carbon nanoboxes (denoted as H-Co₃O₄@MCNBs) as an anode material for lithium-ion batteries. The facile metal–organic framework (MOF)-engaged strategy for the synthesis of H-Co₃O₄@MCNBs involves chemical etching-coordination and subsequent two-step annealing treatments. Owing to the unique structural merits including more active interfacial sites, effectively alleviated volume variation, good and stable electrical contact, and easy access of Li⁺ ions, the H-Co₃O₄@MCNBs exhibit excellent lithium-storage performance in terms of high specific capacity, excellent rate capability, and cycling stability.     

Core–Shell α‐Fe2O3@α‐MoO3 Nanorods as Lithium‐Ion Battery Anodes with Extremely High Capacity and Cyclability

α‐Fe₂O₃ nanoparticles are uniformly coated on the surface of α‐MoO₃ nanorods through a two‐step hydrothermal synthesis method. As the anode of a lithium‐ion battery, α‐Fe₂O₃@α‐MoO₃ core–shell nanorods exhibit extremely high lithium‐storage performance. At a rate of 0.1 C (10 h per half cycle), the reversible capacity of α‐Fe₂O₃@α‐MoO₃ core–shell nanorods is 1481 mA h g^?1 and a value of 1281 mA h g^?1 is retained after 50 cycles, which is much higher than that retained by bare α‐MoO₃ and α‐Fe₂O₃ and higher than traditional theoretical results. Such a good performance can be attributed to the synergistic effect between α‐Fe₂O₃ and α‐MoO₃, the small size effect, one‐dimensional nanostructures, short paths for lithium diffusion, and interface spaces. Our results reveal that core–shell nanocomposites have potential applications as high‐performance lithium‐ion batteries.     

Fabrication of Selenium/Carbon Core–Shell Submicrowires and Carbon Submicrotubes by a Facile Solution Process

We show a facile one‐step surfactant‐assisted solution process to fabricate selenium/carbon (Se/C) coaxial core–shell submicrowires and their transformation into carbon submicrotubes by dissolution of the Se cores at ambient temperature. The formation process of the Se/C core–shell submicrowires was investigated. The results of the investigation and further experiments confirm that the thickness of the carbon shell could be tailored by controlling the experimental conditions. The as‐synthesized Se/C core–shell submicrowires and the carbon submicrotubes are potentially useful in applications such as in nanodevices or biomedicine.     

Facile Preparation of a Stable Fe3O4@LDH@NiB Magnetic Core‐Shell Nanocomposite for Hydrogenation

A novel NiB deposited layered double hydroxide (LDH ) coated ferroferric oxide (Fe₃O₄ @LDH @NiB ) magnetic core‐shell nanocomposite was successfully fabricated by the combination of coprecipitation and impregnation‐reduction. During the Fe₃O₄ @LDH preparation, a facile template‐free approach was employed to introduce the LDH shell, which was more efficient than the conventional method for the preparation of mesoporous materials that always needs to introduce and remove templates. The resulted Fe₃O₄ @LDH has a relatively high surface area and abundant surface hydroxyl group, which can adsorb metal ions, making it favorable to disperse and stabilize the active Ni species, as demonstraed by TEM , XPS , FT‐IR and BET characterizations. Therefore, it exhibited good activity in the selective hydrogenation of cinnamic acid to hydrocinnamic acid with the conversion and selectivity both approaching to 100%. Notably, the obtained Fe₃O₄ @LDH @NiB can be easily separated by an external magnetic field and recycled eleven times without appreciable loss of its initial catalytic activity.     

Hierarchical Tubular Structures Composed of Co3O4 Hollow Nanoparticles and Carbon Nanotubes for Lithium Storage

Hierarchical tubular structures composed of Co₃O₄ hollow nanoparticles and carbon nanotubes (CNTs) have been synthesized by an efficient multi‐step route. Starting from polymer‐cobalt acetate (Co(Ac)₂) composite nanofibers, uniform polymer‐Co(Ac)₂@zeolitic imidazolate framework‐67 (ZIF‐67) core–shell nanofibers are first synthesized via partial phase transformation with 2‐methylimidazole in ethanol. After the selective dissolution of polymer‐Co(Ac)₂ cores, the resulting ZIF‐67 tubular structures can be converted into hierarchical CNTs/Co‐carbon hybrids by annealing in Ar/H₂ atmosphere. Finally, the hierarchical CNT/Co₃O₄ microtubes are obtained by a subsequent thermal treatment in air. Impressively, the as‐prepared nanocomposite delivers a high reversible capacity of 1281 mAh g^?1 at 0.1 A g^?1 with exceptional rate capability and long cycle life over 200 cycles as an anode material for lithium‐ion batteries.     

Core–Shell‐Structured CNT@RuO2 Composite as a High‐Performance Cathode Catalyst for Rechargeable Li–O2 Batteries

A RuO₂ shell was uniformly coated on the surface of core CNTs by a simple sol–gel method, and the resulting composite was used as a catalyst in a rechargeable Li–O₂ battery. This core–shell structure can effectively prevent direct contact between the CNT and the discharge product Li₂O₂, thus avoiding or reducing the formation of Li₂CO₃, which can induce large polarization and lead to charge failure. The battery showed a high round‐trip efficiency (ca. 79 %), with discharge and charge overpotentials of 0.21 and 0.51 V, respectively, at a current of 100 mA g_total^?1. The battery also exhibited excellent rate and cycling performance.     

杯[4]醌/N掺杂的无定形碳纳米纤维复合材料储锂性能

生物质甲壳素来源丰富、廉价易得、N含量高且具有纤维结构,经高温碳化即可获得导电性良好的多孔碳材料。 杯[4]醌(Calix[4]quinone,C4Q)的理论比容量高达447 mA·h/g,但它在传统电解液中的高溶解性和导电性差限制了其在锂电池中的实际应用。 为了解决上述问题,本文以甲壳素为原料,经高温处理制得了N掺杂的无定形碳纳米纤维材料(NACF),并利用其多孔结构吸附C4Q,制备出C4Q/NACF(质量比为1:1)复合材料。 该复合材料在0.1 C电流密度下,首圈放电比容量为426 mA·h/g,循环100圈后比容量为213 mA·h/g,甚至在1 C电流密度下,C4Q/NACF复合材料仍有188 mA·h/g的放电比容量。 实验结果表明,利用NACF碳材料固载C4Q的方法可以提高C4Q锂离子电池的循环稳定性和导电性。