The electrical conductivies of the poly(alkynylsilane)s [C-SiR1R2-CC-Z]n (R1R2Si = Ph2Si, nOct(Me)Si, 2,3.4,5-tetraphenyl-1-sila-2,4-cyclopentene; Z = (hetero)aromatic group) doped with FeCl3 are found to lie in the range 10−9 < α < 10−3 S cm−1, whereas those of the undoped polymers are less than 10−10 S cm−1. The presence of Ph groups on Si leads to incresed conductivity. 相似文献
Novel nonlinear optical (NLO) chromophore, 2-{3-[2-(4-methylsulfonylphenyl)vinyl]carbazol-9-yl}ethanol was synthesized and subsequently reacted with methacryloyl chloride to give a photoconducting NLO monomer ( M1 ). 2-Methylacrylic acid 2-[3-(diphenylhydrazonomethyl)carbazol-9-yl]ethyl ester ( M2 ) was also synthesized as a comonomer to enhance the carrier mobility of the NLO polymer. Photoconducting NLO polymers, P1 and P2 were obtained by the copolymerization of Ml with methyl methacrylate and M2 , respectively. These polymers were well soluble in organic solvents and showed glass transition at 177 °C and 196 °C, respectively. Polymer films of P1 and P2 were optically clear, and were transparent at wavelengths longer than 420 nm. The electro-optic coefficient (r33) of poled P1 films was measured to be ∼5 pm/V at 632.8 nm. The photoconductive sensitivities of P1 and P2 were 6.2 × 10−14 S·cm−1/mW·cm−2 and 5.6 × 10−11 S·cm−1/mW·cm−2. 相似文献
The hydrated melt of FeCl36H2O has been investigated by laser Raman spectroscopy. Application of the background correction and band fitting computational methods has revealed that the hydrated melt predominantly contains an octahedral species, Fe(H2O)4Cl+2, and a tetrahedral species, FeCl−4. These are present in almost equal concentrations because the hydrated melt produces about twice the amount of contained FeCl−4 species in the presence of excess CL− ion. The relatively high electrical conductivity of the hydrated melt is consistent with the ionic species [Fe(H2O)4Cl2]+ and [FeCl4]−, rather than a bitetrahedral species, Fe2Cl6. 相似文献
Conventional syntheses of 1,2-trans-β-d - or α-l -glycosidic linkages rely mainly on neighboring group participation in the glycosylation reactions. The requirement for a neighboring participation group (NPG) excludes direct glycosylation with (1→2)-linked glycan donors, thus only allowing stepwise assembly of glycans and glycoconjugates containing this type of common motif. Here, a robust glycosylation protocol for the synthesis of 1,2-trans-β-d - or α-l -glycosidic linkages without resorting to NPG is disclosed; it employs an optimal combination of glycosyl N-phenyltrifluroacetimidates as donors, FeCl3 as promoter, and CH2Cl2/nitrile as solvent. A broad substrate scope has been demonstrated by glycosylations with 12 (1→2)-linked di- and trisaccharide donors and 13 alcoholic acceptors including eight complex triterpene derivatives. Most of the glycosylation reactions are high yielding and exclusively 1,2-trans selective. Ten representative, naturally occurring triterpene saponins were thus synthesized in a convergent manner after deprotection of the coupled glycosides. Intensive mechanistic studies indicated that this glycosylation proceeds by SN2-type substitution of the glycosyl α-nitrilium intermediates. Importantly, FeCl3 dissociates and coordinates with nitrile into [Fe(RCN)nCl2]+ and [FeCl4]−, and the ferric cationic species coordinates with the alcoholic acceptor to provide a protic species that activates the imidate, meanwhile the poor nucleophilicity of [FeCl4]− ensures an uninterruptive role for the glycosidation. 相似文献
An electrochemical cycle for the grid energy storage in the redox potential of Fe involves the electrolysis of a highly concentrated aqueous FeCl2 solution yielding solid iron deposits. For the high overall energy efficiency of the cycle, it is crucial to maximize the energy efficiency of the electrolysis process. Here we present a study of the influence of electrolysis parameters on the energy efficiency of such electrolysis, performed in an industrial-type electrolyzer. We studied the conductivity of the FeCl2 solution as a function of concentration and temperature and correlated it with the electrolysis energy efficiency. The deviation from the correlation indicated an important contribution from the conductivity of the ion-exchange membrane. Another important studied parameter was the applied current density. We quantitatively showed how the contribution of the resistance polarization increases with the current density, causing a decrease in overall energy efficiency. The highest energy efficiency of 89 ± 3% was achieved using 2.5 mol L−1 FeCl2 solution at 70 °C and a current density of 0.1 kA m−2. In terms of the energy input per Fe mass, this means 1.88 Wh g−1. The limiting energy input per mass of the Fe deposit was found to be 1.76 Wh g−1.
A “Chemical one step method” (COSM) is proposed to prepare electromagnetic functional composite nanofibers of polyaniline (PANI/γ‐Fe2O3) having a diameter of ≈20 nm. In this approach FeCl3 is acts as the oxidant either for polymerization of aniline or for preparation of γ‐Fe2O3 magnets. Besides, it also provides protons produced by the hydrolysis process for doping PANI. It is found that the composite nanofibers have a high conductivity (10−1 ∼ 100 S · cm−1) and super‐paramagnetic properties (Ms = 0.46 ∼ 6.03 emu · g−1 and Hc = 0) at room temperature, where the conductivity is mainly affected by the molar ratio of FeCl3 to aniline monomer whereas the magnetic properties are dominated by the amount of FeCl2.
We report that the formation of μ‐oxo diferric compounds from O2 and FeCl2 complexes within the tris(2‐pyridylmethyl)amine series (N. K. Thallaj et al. Chem. Eur. J., 2008 , 14, 6742–6753) involves coordination of O2 to the metal centre and that this reaction occurs following initial dissociation of the bound equatorial chloride anion. We also report evidence of the formation of a reduced form of dioxygen by an inner‐sphere mechanism, thus leading to modification of the ligand. The solid‐state structures of [FeCl2L] complexes (L1=mono(α‐pivalamidopyridylmethyl)bis(2‐pyridylmethyl)amine, L2=mono(α‐pivalesteropyridylmethyl)bis(2‐pyridylmethyl)amine, L3=bis(α‐pivalamidopyridylmethyl)mono(2‐pyridylmethyl)amine are described, and spectroscopic data support the structural retention in solution. In [FeCl2L3], the two amide hydrogen atoms stabilise the equatorial chloride anion in such a way that its exchange by a weak ligand is impossible: [FeCl2L3] is perfectly oxygen‐stable. In [FeCl2L2], the equatorial chloride anion is completely free to move and coordination of O2 can take place. The reaction product with [FeCl2L2] is a μ‐oxo diferric complex in which the ester function has been transformed into a phenol group. This conversion can be seen as a hydrolysis reaction in basic medium, hence supporting the initial formation of a reduced form of dioxygen in the medium. Complex [FeCl2L1] exhibits a very weak reactivity with O2, in line with a semistabilised equatorial chloride counteranion. 相似文献
A series of iron(III) bis-complexes of the type [FeL2]X 1-4 , X = OH− ( 1 ), Cl¯ ( 3 ), and FeCl4¯ ( 2 , 4 ), where LH is a tridentate (N,N,S) ligands such as N′-(1-pyridin-2-ylethylidene)-hydrazinecarbodithioic acid methyl ester ( HL1 ), N′-(phenylpyridin-2-ylmethylene)-hydrazinecarbodithioic acid methyl ester ( HL2 ), N′-quinolin-2-ylmethylene-hydrazinecarbodithioic acid methyl ester ( HL3 ), or N′-(1-methyl-1H-imidazol-2-yl-methylene)hydrazinecarbodithioic acid methyl ester ( HL4 ) has been isolated in moderate to good yields and completely characterized by elemental analyses, conductivity studies, and infrared and UV-visible spectral measurements. The single crystal X-ray structures of 1 , 2 and 4 revealed that two deprotonated tridentate (NNS) ligands are meridionally coordinated to constitute a distorted octahedral coordination geometry around iron(III). In acetonitrile solution, all the complexes show quasi-reversible Fe(III)/Fe(II) redox behavior. The in vitro cytotoxicity of the ligands HL1–HL4 (IC50: HL1 , 64.5; HL2 , 51.0; HL3 , 124.0; HL4 , 45.0 μM at 24 h) and complexes 1–4 (IC50: 1 , 84.5; 2 , 40.0; 3 , 168.5; 4 , 50.5 μM at 24 h) towards A549 lung cancer cell lines are similar to cisplatin (69.0 μM), revealing that free ligands cause cancer cell death with potency higher than the corresponding iron(III) complexes. Also, both the ligands and the complexes cause cell death mainly through apoptotic mode, as revealed by the observation of a higher percentage of apoptotic cells in acridine orange (AO)/ ethidium bromide (EB), and Annexin V-Cy3 stained cancer cells. 相似文献
Mononitrosyl–iron compounds (MNICs) of the Enemark–Feltham {FeNO}7 type can be divided into a doublet (S=1/2) and a quartet (S=3/2) spin variant. The latter relies on weak-field co-ligands such as amine carboxylates. Aqua-only co-ligation appears to exist in the long-known “brown-ring” [Fe(H2O)5(NO)]2+ cation, which was prepared originally from ferrous salts and NO in sulfuric acid. A chloride variant of this species, the green [FeCl3(NO)]− ion, was first prepared analoguosly by using hydrochloric instead of sulfuric acid. As a tetrahedral species, it is the simple prototype of sulfur-bonded {FeNO}7 (S=3/2) MNICs of biological significance. Although it has been investigated for more than a century, neither clean preparative routes nor reliable structural parameters were available for the [FeCl3(NO)]− ion and related species such as the [FeCl2(NO)2]− ion, a prototypical dinitrosyliron species (a “DNIC”). In this work, both issues have been resolved. In addition, we report on a computational study on the ground- and excited-state properties including an assignment of the chromophoric transitions. Photoinduced metastable isomers were characterised in a combined experimental and computational approach that resulted in the confirmation of a single photoinduced linkage isomer of the paramagnetic nitrosyl–metal coordination entity. 相似文献
Summary: Nanoscaled polyaniline (PANI) fibers with 17–30 nm in diameter were successfully prepared by oxidation polymerization using ferric hydrochloride (FeCl3 · 6H2O) as an oxidant in the presence of p‐toluenesulfonic acid (p‐TSA), β‐naphthalenesulfonic acid (β‐NSA), and camphorsulfonic acid (CSA) as the dopants. The resulting nanofibers show smaller diameter, higher crystallinity and conductivity (10−1 S · cm−1) compared with the nanofibers oxidized by ammonium persulfate (APS), which may be due to the lower oxidation/reduction potential of FeCl3.
SEM images of the PANI nanofibers prepared by oxidation polymerization using ferric hydrochloride as an oxidant. 相似文献
Electrically conducting fibers based on coconut fibers (CF) and polyaniline (PANI) were prepared through in situ oxidative polymerization of aniline (ANI) in the presence of CF using iron (III) chloride hexahydrate (FeCl3.6H2O) or ammonium persulfate (APS) as an oxidant. The PANI-coated coconut fibers (CF-PANI) displayed various morphologies, electrical conductivities and percentages of PANI on the CF surface. For both systems, a PANI conductive layer was present on the CF surface, which was responsible for an electrical conductivity of around 1.5 × 10−1 and 1.9 × 10−2 S cm−1 for composites prepared with FeCl3.6H2O and APS, respectively; values that are similar to that of pure PANI. In order to modify the structure and properties of polyurethane derived from castor oil (PU) both CF-PANI and pure PANI were used as conductive additives. The PU/CF-PANI composites exhibited higher electrical conductivity than pure PU and PU/PANI blends. Additionally, the PU/CF-PANI composites showed a variation in electrical resistivity according to the compressive stress applied, indicating that these materials could be applied for pressure-sensitive applications. 相似文献
The synthesis of a series of tetraorganotin(IV) compounds containing selectively the 2-thienyl, 3-thienyl, 5-methyl-2-thienyl, 5-t-butyl-2-thienyl, 4-methyl-2-thienyl and 3-(2-pyridyl)-2-thienyl groups [L], of formula R4-nSn[L]n (R = Ph, p-tolyl, Me, cyclopentyl, cyclohexyl; n = 1–4) is reported. Features of structural interest deduced from 119mSn Mössbauer and NMR (13C and 119Sn modes) spectra are considered. 相似文献
A series of imidazolium-based symmetrical and asymmetrical dicationic ionic liquids (DcILs) with alkyl spacers of different length and with [FeCl3Br]− as counter ion have been synthesized. The synthesized DcILs are characterized by using FTIR and Raman spectroscopy as well as mass spectrometry, along with single-crystal XRD analysis. Physicochemical properties such as solubility, thermal stability and magnetic susceptibility are also measured. These compounds show low melting points, good solubility in water and organic solvents, thermal stability, and paramagnetism. The products of molar susceptibility and temperature (χmol⋅T) for the synthesized DcILs have been found between 4.05 to 4.79 emu mol−1 K Oe−1 and effective magnetic moment values have also been determined to be compared to that expected from the spin-only approximation. 相似文献
Heck coupling reactions are introduced as an efficient method to prepare porous polymers. Novel inorganic‐organic hybrid porous polymers (HPPs) were constructed via Heck coupling reactions from cubic functional polyhedral oligomeric silsesquioxanes (POSS), iodinated octaphenylsilsesquioxanes (OPS) and octavinylsilsesquioxanes (OVS) using Pd(OAc)2/PPh3 as the catalyst. Here, two iodinated OPS were used, IOPS and p‐I8OPS. IOPS was a mixture with 90% octasubstituted OPS (I8) and some nonasubstituted OPS (I9), while p‐I8OPS was a nearly pure compound with ≥99% I8 and ≥93% para‐substitution. IOPS and p‐I8OPS reacted with OVS to produce the porous materials HPP‐1 and HPP‐2, which exhibited comparable specific surface areas with SBET of 418 ± 20 m2 g−1 and 382 ± 20 m2 g−1, respectively, with total pore volumes of 0.28 ± 0.01 cm3 g−1 and 0.23 ± 0.01 cm3 g−1, respectively. HPP‐1 showed a broader pore size distribution and possessed a more significant contribution from the mesopores, when compared with HPP‐2, thereby indicating that IOPS may induce more disorder because of the geometrical asymmetry. HPP‐1 and HPP‐2 possessed moderate carbon dioxide uptakes of 134 and 124 cm3 g−1 at 1 bar at 195 K, making them promising candidates for CO2 capture and storage. The synthesized porous polymers may be easily post‐functionalized using the retained ethenylene groups.
Poly(phenylene vinylene) (PPV) film was synthesized via a soluble precursor poly-mer. Strong fluorescence at 500-600nm was observed in both precursor and PPV film.Room-temperature conductivity of PPV film doped with FeCl_3 depends on the eliminationtemperature, the concentration of FeCl_3 and doping time. The maximum conductivity ofdoped PPV at room-temperature can reach about 40 S·cm~(-1). The temperature depen-dence of conductivity was controlled by 1D-VRH (1 Dimension Variable Range Hopping)model with T_0 value of 3.9×10~3 K. Non-Ohmic conductivity resulting from Schottky effectwas observed and the value of converted voltage from Ohmic region into non-Ohmic regionat the current-voltage characteristic was found to be dependent upon the work function ofelectrodes. 相似文献
A pyrrole-functionalized monomer 2-[3-(1H-pyrrol-2-yl)phenyl]-1H-pyrrole (PyPhPy) was synthesized. The structure of monomer was investigated by Nuclear Magnetic Resonance (1H NMR) and Fourier Transform Infrared (FTIR) spectroscopy. The chemical polymerization of PyPhPy (CPyPhPy) was realized using FeCl3 as the oxidant. The electrochemical oxidative polymerization of polymer P(PyPhPy) and its copolymer with 3,4-ethylenedioxythiophene poly(2-[3-(1H-pyrrol-2-yl)phenyl]-1H-pyrrole-co-3,4-ethylenedioxythiophene) [P(PyPhPy-co-EDOT)] were achieved via potentiodynamic method by using NaClO4/LiClO4 as the supporting electrolyte in CH3CN. Characterizations of the resulting polymers were performed by cyclic voltammetry (CV), FTIR, scanning electron microscopy (SEM), UV-Visible spectrophotometry (UV-Vis) and thermogravimetry analyses (TGA). Electrical conductivity of CPyPhPy, P(PyPhPy), and P(PyPhPyco-EDOT) were measured by four-probe technique. 相似文献
The self-assembly of iron(III) chloride with three pyrazolyl-s-triazine ligands, namely 2,4-bis(3,5-dimethyl-1H-pyrazol-1-yl)-6-(piperidin-1-yl)-1,3,5-triazine (PipBPT), 4-(4,6-bis(3,5-dimethyl-1H-pyrazol-1-yl)-1,3,5-triazin-2-yl)morpholine (MorphBPT), and 4,4’-(6-(3,5-dimethyl-1H-pyrazol-1-yl)-1,3,5-triazine-2,4-diyl)dimorpholine (bisMorphPT) afforded [Fe(PipBPT)Cl2][FeCl4] (1), [Fe(MorphBPT)Cl2][FeCl4] (2), and [H(bisMorphPT)][FeCl4]. bisMorphPT.2H2O (3), respectively, in good yield. In complexes 1 and 2, the Fe(III) is pentacoordinated with three Fe-N interactions from the pincer ligand and two coordinated chloride anions in the inner sphere, and FeCl4¯ in the outer sphere. Complex 3 is comprised of one protonated ligand as cationic part, one FeCl4¯ anion, and one neutral bisMorphPT molecule in addition to two crystallized water molecules. Analysis of molecular packing using Hirshfeld calculations indicated that H…H and Cl…H are the most important in the molecular packing. They comprised 40.1% and 37.4%, respectively in 1 and 32.4% and 37.8%, respectively in 2. Complex 1 exhibited the most bioactivity against the tested microbes while 3 had the lowest bioactivity. The bisMorphPT and MorphBPT were inactive towards the tested microbes while PipBPT was active. As a whole, the Fe(III) complexes have enhanced antibacterial and antifungal activities as compared to the free ligands. 相似文献
π-Conjugated polymers bearing nitro substituent(s), e.g., poly(aryleneethynylene) (PAE) type polymers and poly(4,8-dinitroanthraquinone-1,5-diyl) P(4,8-NO2-1,5-AQ), show semiconducting properties with electrical conductivities of an order of 10−7 to 10−6 S · cm−1 at room temperature without special oxidation and reduction of the polymer. P(4,8-NO2-1,5-AQ) shows a large shift of phase in alternating current (ac) measurements and a unique magnetism at low temperature. 相似文献
Different new catalysts based on transition metal compounds of groups IVb, Vb, VIb and VIIIb combined with a reducing agent such as: triethylaluminium and butyllithium in various solvents; toluene and silicone oil, were used for the polymerization of acetylene. By changing the catalyst, cocatalyst, solvent and polymerization conditions, a large variety of polyacetylenes were obtained. The polyacetylenes were characterized by SEM, FTIR and C13 NMR spectroscopies. Some of the new polymers were stretched mechanically and then doped with iodine. Thus highly conducting thick (20μm) and transparent films (0.1 μm) were obtained, with conductivities of 20000 ω−0.cm−1 and 8000 ω−1.cm−1, respectively. After modification of the standard catalyst system (Ti(OC4H9) 4-Al (C2H5) 3-silicone oil) by the introduction of some additional reducing agents, conductivities as high as 120000 ω−1.cm−1, after elongation and iodine doping of the polymers, were reached. In this paper we present also a comparative stability study of the new (CH)x films and powders. 相似文献