Solvent‐induced reversible color changes in block copolymer films and new locking method of structural colors

The well‐defined polystyrene‐block‐poly(4‐vinylpyridine) [PS‐block‐P4VP (SV1); lamellar morphology] and polyisoprene‐block‐poly(α‐methyl styrene) [PI‐block‐PMS (IMS1); PI spherical morphology] diblock copolymers were prepared by sequential anionic polymerization techniques. The segregated chains in the P4VP lamellar layers of the SV1 film (PS lamellae: 41 nm; P4VP lamellae: 51 nm) were crosslinked with 1,4‐dibromobutane. This crosslinked film was insoluble in organic solvents such as benzene and chloroform (CHCl₃) and exhibited various structural colors under the swollen state. The IMS1 film (body‐centered cubic lattice, diameter of PI spheres: 53 nm) was soaked in the mixture of CHCl₃/hexane (1 : 10, v/v). This solvent system resulted in the swelling of PI spherical domains. The transmitted and reflected light color through the swollen film changed to a deep blue. Such color changes were reversible upon swelling in solvent and evaporation of the solvent. Subsequently, photofunctional diethyldithiocarbamate (DC) groups were introduced into the PS block of the parent block copolymer IMS1 by means of polymer reactions. The locking of the cubic lattice was performed with living radical graft copolymerization from DC groups of swollen as‐cast film in methyl methacrylate (MMA) under UV irradiation. The locking of structural colors such as blue and green was also achieved, varying the content of poly(methyl methacrylate) (PMMA) grafted chains. Copyright © 2005 John Wiley & Sons, Ltd.     

Square Lamellar Structure Having Phase‐Separated Microdomain in H‐Shaped Block Copolymer Thin Film

The morphology of a H‐shaped block copolymer (poly(ethylene glycol) backbone and polystyrene branches (PS)₂PEG(PS)₂) in a thin film has been investigated. A peculiar square lamella that has a phase‐separated microdomain at its surface is obtained after spin coating. The experimental temperature plays a critical role in the lamellar formation. The copolymer first self‐assembles into square lamellar micelles with an incomplete crystalline core due to the crystallizability of PEG. In the subsequent process of solvent evaporation, phase separation between PS and non‐crystalline PEG attached at the chain‐folded PEG surface takes place, which results in phase‐separated microdomains being formed at the lamellar surface.

     

Synthesis and microphase separation behavior of random,mixed cylindrical brush copolymers bearing polystyrene and poly(<Emphasis Type="Italic">ε</Emphasis>-caprolactone) side chains

A series of mixed, random cylindrical brush copolymers bearing polystyrene (PS) and poly(ε-caprolactone) (PCL) side chains were synthesized via the combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). These novel cylindrical brush copolymers have been characterized by means of nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). It was found that the mikto-armed cylindrical brush copolymers were microphase-separated in bulks and that the morphologies were dependent on the mass ratios of PS to PCL side chains. One of the cylindrical brush copolymers was employed to incorporate into epoxy thermoset to investigate effect of the mikto-armed cylindrical brush architecture on the reaction-induced microphase separation behavior. Depending on the concentration of the cylindrical brush in epoxy, the thermosets can display the morphologies with the spherical, worm-like and lamellar PS microdomains dispersing in continuous thermosetting matrices.     

First Step Towards a Devil's Staircase in Spin‐Crossover Materials

The unprecedented bimetallic 2D coordination polymer {Fe[(Hg(SCN)₃)₂](4,4′‐bipy)₂}_n exhibits a thermal high‐spin (HS)?low‐spin (LS) staircase‐like conversion characterized by a multi‐step dependence of the HS molar fraction γ_HS. Between the fully HS (γ_HS=1) and LS (γ_HS=0) phases, two steps associated with different ordering appear in terms of spin‐state concentration waves (SSCW). On the γ_HS≈0.5 step, a periodic SSCW forms with a HS‐LS‐HS‐LS sequence. On the γ_HS≈0.34 step, the 4D superspace crystallography structural refinement reveals an aperiodic SSCW, with a HS‐LS sequence incommensurate with the molecular lattice. The formation of these different long‐range spatially ordered structures of LS and HS states during the multi‐step spin‐crossover is discussed within the framework of “Devil's staircase”‐type transitions. Spatially modulated phases are known in various types of materials but are uniquely related to molecular HS/LS bistability in this case.     

Lamellar orientation in thin films of symmetric semicrytalline polystyrene-b-poly(ethylene-co-butene) block copolymers: effects of molar mass, temperature of solvent evaporation, and annealing

Orientation of the lamellar microdomains in thin films of three symmetric polystyrene-b-poly(ethylene-co-butylene) block copolymers (S65E155, S156E358, and S199E452) on mica was investigated via atomic force microscopy (AFM), grazing incidence X-ray diffraction (GIXRD) and X-ray photoelectron spectroscopy (XPS). The results show that lamellar orientation in the SxEy block copolymers greatly depends on the molar mass of the block copolymers, the temperature of solvent evaporation, and annealing. The nascent thin film of the low molar mass block copolymer, S65E155, shows a multilayered structure parallel to the mica surface with the PS block at both polymer/mica and polymer/air interfaces, but the high molar mass block copolymers, S156E358 and S199E452, exhibit a structure with lamellar microdomains perpendicular to the mica surface. When the solvent is evaporated at a lower temperature, the crystallization rate is fast and a two-dimensional spherulite structure with the lamellar microdomains perpendicular to the mica surface is observed. Annealing of all the thin films with lamellar microdomains perpendicular to the mica surface leads to morphological transformation into a multilayered structure parallel to the mica surface. In all SxEy thin films on mica, the stems of PE crystals are always perpendicular to the interface between the lamellar PE and PS microdomains. A mechanism is proposed for the formation of different microdomain orientations in the thin films of semicrystalline block copolymers. When the thin film is prepared from a homogeneous solution, microdomains perpendicular to the substrate surface are formed rapidly for strongly segregated block copolymers or at a lower crystallization temperature and kinetically trapped by the strong segregation strength or solidification of crystallization, while for weakly segregated block copolymers or at slower crystallization rate, the orientation of the microdomains is dominated by surface selectivity.     

Synthesis and Microphase Separation Behavior of Random,Mixed Cylindrical Brush Copolymers Bearing Polystyrene and Poly(ε-caprolactone) Side Chains

A series of mixed, random cylindrical brush copolymers bearing polystyrene(PS) and poly(ε-caprolactone)(PCL) side chains were synthesized via the combination of ring-opening polymerization(ROP) and atom transfer radical polymerization(ATRP). These novel cylindrical brush copolymers have been characterized by means of nuclear magnetic resonance(NMR) spectroscopy, gel permeation chromatography(GPC) and differential scanning calorimetry(DSC). It was found that the mikto-armed cylindrical brush copolymers were microphase-separated in bulks and that the morphologies were dependent on the mass ratios of PS to PCL side chains. One of the cylindrical brush copolymers was employed to incorporate into epoxy thermoset to investigate effect of the mikto-armed cylindrical brush architecture on the reaction-induced microphase separation behavior. Depending on the concentration of the cylindrical brush in epoxy, the thermosets can display the morphologies with the spherical, worm-like and lamellar PS microdomains dispersing in continuous thermosetting matrices.     

Ozonolysis efficiency of PS‐b‐PI block copolymers for forming nanoporous polystyrene

A PS‐b‐PI diblock copolymer has been synthesized and blended with a homopolystyrene of a variable molecular weight at a variable weight ratio, resulting in different volume fractions of PS to PI and various morphologies. After being cast as a film, the double bonds in the PI microdomains were cleaved via ozonolysis resulting in the formation of a nanoporous PS. The ease of ozonolysis depended strongly upon the morphology of the PI microdomains. The degree of ozonization after 24‐h reaction was about 90% for lamellar microdomains, about 80% for bicontinuous microdomains, about 70% for cylindrical microdomains, and about 50% for spherical microdomains. These variations were attributed to the decrease in the contact area of PI microdomains with ozone and the total volume of PI microdomains accessible to ozone. All PS‐b‐PI/homopolystyrene samples have turned into nanoporous materials after the removal of PI nanodomains. SEM, AFM, and TEM images indicated that the resulting PS had a pore size of 20–30 nm, and thus was potentially useful for photonic crystals or fuel cell applications. © 2008 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 46: 1964–1973, 2008     

Guest induced reversible on–off switching of elastic frustration in a 3D spin crossover coordination polymer with room temperature hysteretic behaviour

A binary reversible switch between low-temperature multi-step spin crossover (SCO), through the evolution of the population γ_HS(T) with high-spin (HS)-low-spin (LS) sequence: HS₁LS₀ (state 1) ↔ HS_2/3LS_1/3 (state 2) ↔ HS_1/2LS_1/2 (state 3) ↔ HS_1/3LS_2/3 (state 4) ↔ HS₀LS₁ (state 5), and complete one step hysteretic spin transition featuring 20 K wide thermal hysteresis centred at 290 K occurs in the three-dimensional (3D) Hofmann-type porous coordination polymer {Fe^II(3,8phen)[Au(CN)₂]₂}·xPhNO₂ (3,8phen = 3,8-phenanthroline, PhNO₂ = nitrobenzene), made up of two identical interpenetrated pcu-type frameworks. The included PhNO₂ guest (x = 1, 1·PhNO₂) acts as a molecular wedge between the interpenetrated 3D frameworks via PhNO₂-3,8phen intermolecular recognition and is the source of the strong elastic frustration responsible for the multi-step regime. Detailed X-ray single crystal analysis reflects competition between spatial periodicities of structurally inequivalent HS and LS SCO centres featuring: (i) symmetry breaking (state 3) with ⋯HS–LS⋯ ordering with γ_HS = 1/2; and (ii) occurrence of spatial modulation of the structure providing evidence for stabilization of local or aperiodic ordered mixed spin states for states 2 and 4 (with γ_HS ≈ 2/3) and 4 (with γ_HS ≈ 1/3), respectively. Below c.a. 20 K, structural and magnetic analyses show the photogeneration of a metastable HS*, state 6. The room-temperature single-step hysteretic regime appears with release of the guest (x = 0, 1) and the elastic frustration, and reversibly switches back to the original four-step behaviour upon guest re-adsorption. Both uncommon relevant SCO events meeting in the same material represent a rare opportunity to compare them in the frame of antiferro- and ferro-elastic transitions.

Reversible switch between a robust bistable two-state room temperature spin crossover (SCO) and its transformation in a four-stepped elastically frustrated SCO due to guest inclusion in a metal–organic Hofmann framework.     

Morphology of polypropylene crystals. I. Dilute solution-grown lamellar crystals

The dependence of crystalline morphology of isotactic polypropylene crystallized from dilute solutions on its molecular weight and growing conditions and the mechanism of crystal growth were studied by electron microscopy and electron diffraction. Lathshaped lamellar crystals 150–300 A. in thickness are obtained from fractionated polypropylene powders of M _w (average molecular weight) = 600,000 and 240,000, but not from the samples of M _w = 82,000 and 44,000, by means of isothermal crystallization at 130°C. for 20 hr. in dilute α-chloronaphthalene solution (0.005 wt.-%). Precipitation of the fractionated polypropylene sample of M _w = 82,000 from a dilute solution of carbitol gives typical dendritic crystals under the same isothermal crystallizing conditions as mentioned above. The mode of chain folding in these crystals based on the orientation and the crystal structure of the lamellar crystals agrees with that proposed by Sauer, Morrow, and Richardson. From the morphological observations, the mechanism of growth pertinent to polypropylene lamellar crystals is presumed to be as follows: fibrils at first aggregate, then the molecular chains are folded to form small lamellae, and then these small lamellae accumulate compactly to grow to large, lath-shaped, lamellar crystals.     

Investigation of molecular order and phase transitions of smectic poly(ester imide)s by means of small-angle X-ray scattering

The molecular order and phase transitions of two smectic poly(ester imide)s based on aminobenzoic acid trimellitimide (PEI 1) or aminocinnamic acid trimellitimide (PEI 2) and α,ω-dihydroxydodecane were investigated by X-ray scattering. During cooling, the polymers pass through monotropic smectic liquid-crystalline (LC) phases (S_A, S_C), which transform into higher-ordered smectic-crystalline phases (S_E, S_H). The smectic layer structure of about 3 nm gives rise to a sharp reflection at 2θ ≅ 3°. Peak shape analysis and analysis of the interface distribution function revealed long-range longitudinal correlation among the mesogens in the LC phase but short-range lateral correlation. The development of a broad reflection in the small-angle X-ray scattering (SAXS, 2θ < 1°) indicates the formation of a lamellar two-phase system. The long-period changes reversibly between 10 and 30 nm with increasing temperature. The crystalline lamellae comprise a number of smectic-crystalline layers with packed mesogens, while the noncrystalline interlamellar regions keep their smectic-LC order. In the metastable S_B phase, formed during annealing of quenched PEI 1, the diffuse SAXS indicates a random distribution of small, probably fringed, crystals with hexagonal-packed mesogens. In the lamellar S_E and S_H phases, tie molecules play an important role, but chain folding cannot be excluded. Received: 16 July 1999/Accepted: 28 April 2000     

Morphology re-entry in asymmetric PS-PI-PS' triblock copolymer and PS homopolymer blends

Here, we report the morphology variation in a series of PS-b-PI-b-PS' asymmetric triblock copolymer and PS homopolymer (hPS) blends, where PS' and PS are polystyrene blocks with a molecular weight ratio of approximately 0.11 and PI is poly(isoprene). We find that adding a small amount of hPS results in significant order–order transition (OOT) boundary deflection toward higher PS volume fractions f_PS, which is accompanied by morphology re-entry. For example, the neat triblock copolymer with a PS + PS' volume fraction of f_PS = 0.38 exhibits a lamellar microphase; adding a small amount of hPS reverts the morphology into a hexagonal phase with PS cylinders, while further increasing the hPS fraction leads to normal OOTs from PS cylinders to lamellae, to PI cylinders and finally to spheres. The morphology variation reported here is significantly different from that reported in binary blends of diblock or symmetric triblock copolymer with homopolymer. While the domain features of the LAM structure can be correctly reproduced by self-consistent field theory (SCFT), the observed morphology re-entry is absent in the theoretical SCFT phase diagram. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 169–179     

Effect of ionic impurities on the electric field alignment of diblock copolymer thin films

In Forschung hast Du immer zu mir gesagt, Schaffe etwas!. Mein Chef, ich habe immer versucht Deinen Befehlen zu folgen. Ich widme Dir diese Veröffentlichung. Mensch, mit fünf und siebzig bist Du noch jung, schön Geburtstag!The effect of ionic impurities on the electric field alignment of lamellar microdomains in polystyrene-block-poly(methyl methacrylate) diblock copolymer thin films was studied using transmission electron microscopy (TEM) and atomic force microscopy (AFM). At lithium ion concentrations greater than ~210 ppm, the microdomain morphology in block copolymers could be aligned in the direction of an applied electric field, regardless of the strength of interfacial interactions. Complete alignment of the copolymer microdomains, even those adjacent to the polymer/substrate interface, occurred by a pathway where the applied electric field enhanced fluctuations at the interfaces of the microdomains with a wavelength comparable to L_o, the equilibrium period of the copolymer. This enhancement in the fluctuations led to a disruption of the lamellar microdomains into smaller microdomains ~L_o in size, that, in time, reconnected to form microdomains oriented in the direction of the applied field.     

Four-step spin-crossover in an oxamide-decorated metal-organic framework

Spin-crossover（SCO） complexes with multiple spin states are promising candidates for high-order magnetic storage and multiple switches. Here, by employing the N,N’-4-dipyridyloxalamide（dpo） ligand, we synthesize two Hofmann-type metal-organic frameworks（MOFs） [Fe（dpo）{Ag（CN）₂}₂]·3DMF（1） and [Fe（dpo）{Ag（CN）₂}₂]·0.5Me CN·2DEF（2）, which exhibit guest dependent four-step SCO behaviors with the sequences of LS → ～LS_2/3HS_1/3→ LS_1/2...     

Synthesis of high molecular weight polystyrene using AGET ATRP under high pressure

High molecular weight polystyrene (PS) was synthesized by ATRP. Under atmospheric pressure (1 bar), PS with M_n up to 200,000 was prepared using either ARGET or ICAR ATRP. Under high pressure (6 kbar), higher molecular weight PS could be obtained due to accelerated radical propagation and diminished radical termination in polymerization of styrene. Therefore, it was possible to synthesize PS with M_n > 1,000,000 and M_w/M_n < 1.25 using AGET ATRP under a pressure of 6 kbar at room temperature. This is the highest molecular weight linear PS prepared by a controlled radical polymerization.     

A computational investigation on the potential energy surface of thiosulfeno with O(3P) reaction

The reaction paths of thiosulfeno radical (HS₂) with O(³P) have been investigated at the UB3LYP/aug-cc-pV(T + d)Z and UCCSD(T)/aug-cc-pV(T + d)Z//B3LYP levels. Two stable collision intermediates, HSSO and SS(H)O, have been considered for the HS₂ + O(³P) reaction. Four products of S + HSO, H + SSO, HS + SO, and S₂ + OH are obtained by starting from HSSO and SS(H)O. The calculated results show that the most feasible paths for the formation of S + HSO, H + SSO, and HS + SO products include no transition states in reaction path, while that of S₂ + OH product includes relatively high energy barriers of 23.0 kcal/mol. Therefore, S + HSO, H + SSO, and HS + SO are main products (with the stability other of HS + SO > H + SSO > S + HSO) and S₂ + OH is the second product in HS₂ + O(³P) reaction. Because, all intermediates, transition states, and products involved in the reaction paths lie below the initial reactants, the HS₂ + O(³P) reaction is expected to be rapid even at low temperatures.     

Liquid-liquid phase equilibria for some polystyrene-methylcyclohexane mixtures

Liquid-liquid cloud point diagrams of solutions of nearly monodisperse samples of polystyrene (PS), and binary mixtures of nearly monodisperse PS’s, both in methylcyclohexane (MCH), were determined for several polymer molecular weights (M_w) at 0.1 MPa. The bimodal mixtures (PS[M_w(1),ρ(1)] + PS[M_w(2),ρ(2)], M_w(1)=90×10³ g/mol, M_w(2)=13×10³ g/mol, 5.78 × 10³ g/mol, and 2.2 × 10³ g/mol, ρ=1.06) were prepared constraining 〈M_w〉=38.6×10³ g/mol, ρ=M_w/M_n is the polydispersity index. In each case the cloud point curves (CPC’s) for the bimodal mixtures are strongly skewed, lying well above CPC for 〈M_w〉 when φ<φ_CRITICAL, and below CPC for 〈M_w〉 when φ>φ_CRITICAL; φ is volume fraction polymer in the polymer/solvent mixture. The experimental results are discussed in the context of empirical and mean-field representations.     

3D analysis of the lattice defects in the gyroid network structure of a block copolymer/homopolymer blend – The line-like defects in the gyroid network structure

The line-shaped defects formed in the gyroid bicontinuous microdomain structures in the solution-casting process of a blend of polystyrene-block-polyisoprene (SI) diblock copolymer and homopolystyrene (HS) were investigated using 3D electron tomography. The inclusion-type lattice defects composed of segregated HS formed during the morphological transition from the preexisted sponge phase to the stable gyroid phase induced by the phase separation between SI and HS. The gyroid grains grew by consuming the sponge phase and expelling excess HS as well as by impinging each other. Consequently, some expelled HS was trapped as the line-like inclusions in the gyroid grains. Structural rearrangement occurred so that low energy planes of the gyroid phase are facing the HS inclusions while the gyroid structure became continuous across/around the inclusions.     

Real-time X-ray scattering study during heating of oriented injection-molded polyethylene

Highly oriented linear polyethylene was prepared by elongational flow injection molding. The changes in crystal orientation were investigated as a function of temperature by real-time wide-angle X-ray diffraction. Additionally, the influence of molecular weight upon the microstructure and the changes in orientation, during heating near the melting point, and after cooling have been examined. A shish-kebab structure is inferred for the high molecular weight samples (M_w≥10⁵) from SAXS observations, while for samples with M_w<10⁵ only an oriented lamellar structure is found. Consequently, a higher thermal stability is shown by the higher molecular weight samples. Furthermore, a recovery of crystal orientation on rapid cooling of the samples from the melt is only observed for samples with M_w≥10⁵. The results are discussed in terms of a preferential recrystallization of chain-folded lamellae, on cooling, onto the shish fibrils which survive at high temperature.     

Twentyfold increase in alkaline phosphatase activity by sequential reversible activation of the enzyme followed by coupling with a copolyme of ethylene and maleic anhydride

Alkaline phosphatase, APase, (EC 3.1.31) from calf intestine, after shifting the equilibrium by effector molecules towards the dimeric form of the enzyme, was coupled (ratio 1:2, protein: copolymer) to a copolymer of ethylene and maleic anhydride, EMA. The water-soluble APase-EMA was separated from APase and the unbound EMA by DEAE-cellulose ion exchange chromatography. The specific activity of the APase-EMA, compared to APase, increased 26-fold at pH 7.1 and 10-fold at pH 8.6. The pH optimum of APase-EMA was shifted down from pH 9.5 (native APase) to 8.6. This change could be interpreted in terms of polyelectrolyte theory. APase-EMA retained 50–70% of its optimum activity in the pH range 7–8, while APase retained only 5–15% of its optimum activity within the same pH range. Its isoelectric point, pI, was 4.2 (APase 6.0) and it migrated on polyacrylamide gel electrophoresis in a single band, anodic movement twice as fast as APase. Parallel with the kinetic measurements, the reactive-enzyme sedimentation method was used to measure S_20,w values. S_20,w values obtained for APase-EMA, activated APase, and APase dialyzed against wafer were 6.56S, 6.46S, and 5.17S, respectively. Molecular weights, M_r, were determined by equilibrium sedimentation: the values obtained were 180,000, 160,000, and 84,500. M_r values of APase-EMA and APase (native) estimated by Sepharose-4B gel filtrations were essentially the same. The above-mentioned values remained unchanged for APase-EMA after intensive dialysis against water, whereas for the activated APase, separation from the effector molecules caused the equilibrium to shift back to the monomeric, very slightly active enzyme with concomitant changes of S_20,w to 5.15 and M_r to 82,000.     

Reduction of mercury(II) by tropical river humic substances (Rio Negro)-Part II. Influence of structural features (molecular size, aromaticity, phenolic groups, organically bound sulfur)

The influence of structural features of tropical river humic substances (HS) on their capability to reduce mercury(II) in aqueous solutions was studied. The HS investigated were conventionally isolated from Rio Negro water-Amazonas State/Brazil by means of the collector XAD 8. In addition, the isolated HS were on-line fractionated by tangential-flow multistage ultrafiltration (nominal molecular-weight cut-offs: 100, 50, 30, 10, 5 kDa) and characterized by potentiometry and UV/VIS spectroscopy. The reduction of Hg(II) ions to elemental Hg by size-fractions of Rio Negro HS was assessed by cold-vapor AAS (CVAAS). UV/VIS spectrometry revealed that the fractions of high molecular-size (F₁>100 kDa and F₂: 50-100 kDa) have a higher aromaticity compared to the fractions of small molecular-size (F₅: 5-10 kDa, F₆: <5 kDa). In contrast, the potentiometric study showed different concentration of functional groups in the studied HS fractions. The reduction of Hg(II) by aquatic HS fractions at pH 5 proceeded in two steps (I, II) of slow first order kinetics (t_1/2 of I: 160 min, t_1/2 of II: 300 min) weakly influenced by the molecular-size, in contrast to the differing degree of Hg(II) reduction (F₅>F₂>>F₁>F₃>F₄>>F₆). Accordingly, Hg(II) ions were preferably reduced by HS molecules having a relatively high ratio of phenolic/carboxylic groups and a small concentration of sulfur. From these results a complex ‘competition’ between reduction and complexation of mercury(II) by aquatic HS occurring in tropical rivers such as the Rio Negro can be suggested.