Comparison of supercritical fluid and ultrasound-assisted extraction of carotenoids and chlorophyll a from Dunaliella salina

In the work described here the extraction processes of carotenoids and chlorophylls were analysed using two extraction techniques, namely ultrasound-assisted extraction and supercritical fluid extraction, and the results are compared. The solvents used for the ultrasound-assisted extraction were N,N′-dimethylformamide and methanol and for the supercritical fluid extraction, carbon dioxide. The raw material studied was Dunaliella salina, a microalgae characterized by the high levels of carotenoids present in its cellular structure. The results indicate that the supercritical fluid extraction process is comparable to the ultrasound-assisted extraction when methanol is used as solvent. In addition, the supercritical extraction process is more selective for the recovery of carotenoids than the conventional technique since it leads to higher values for the ratio carotenoids/chlorophylls. Finally, the effects of pressure and temperature on the extraction yields of the supercritical fluid extraction process were studied.     

Effect of Ultrasound-Assisted Extraction of Carotenoids from Papaya (Carica papaya L. cv. Sweet Mary) Using Vegetable Oils

By-products from fruits and are of great interest for their potential use in the food industry due to their high content of bioactive compounds. Herein, we examined the ultrasound-assisted extraction (UAE) of carotenoid and carotenoid esters from papaya pulp and peel using soybean oil and sunflower oil as alternative green solvents. Response surface methodology (RSM) was established to optimize the UAE process. Three independent variables, ultrasonic amplitude (20–60%), time (10–60 min), and co-solvent percentage (ethanol) (5–20%, v/v), were applied. The highest total carotenoid content in the UAE extracts was obtained from papaya pulp extracts (58.7 ± 1.6 and 56.0 ± 1.5 μg carotenoids/g oil) using soybean oil and sunflower oil, respectively (60% amplitude/ 10 min/ 20% ethanol). On the other hand, the highest carotenoid content (52.0 ± 0.9 μg carotenoids/g oil) was obtained from papaya peel using soybean oil applying the UAE process (20% amplitude/ 77 min/ 20% ethanol); a minor content of 39.3 ± 0.5 μg carotenoids/g oil was obtained from papaya peel using sunflower oil at 60% amplitude/ 60 min/ 5% ethanol. Lycopene was the most abundant carotenoid among all individual carotenoids observed in papaya oil extracts, obtaining the highest yields of this carotenoid when papaya pulp and peel were extracted using soybean oil (94% and 81%, respectively) and sunflower oil (95% and 82%, respectively). Great extraction of xanthophyll esters was detected using 20% of ethanol in the vegetable oil extraction solvent (v/v). High correlations (>0.85) was obtained between total carotenoid content and color determination in the UAE oil extracts. UAE vegetable oil extracts enriched with carotenoids from papaya by-products could be useful to formulate new food ingredients based on emulsions with interesting potential health benefits.     

Vitamin C and Phenolic Antioxidants of Jua (Ziziphus joazeiro M.) Pulp: A Rich Underexplored Brazilian Source of Ellagic Acid Recovered by Aqueous Ultrasound-Assisted Extraction

Jua (juá in Portuguese) is an underexplored fruit from Brazil’s northeast. This fruit is rich in antioxidant substances. However, there is a dearth of information about jua’s bioactive potential. The present study evaluated two extraction methods (continuous agitation and ultrasound-assisted extraction—UAE) and employed three different solvents (water, ethanol, and acetone) to efficiently recover soluble phenolic compounds. Aqueous extracts obtained by UAE showed the highest total phenolic content (TPC) and antiradical activity. Besides being an eco-friendly procedure, extraction and/or solubility in an aqueous medium is also important for food application. Ellagic acids were the predominant phenolics (80%) found in aqueous jua pulp extract obtained by UAE, as determined by HPLC, while its TPC was 405.8 gallic acid equivalent per gram of fruit. This extract also exhibited a higher scavenging activity towards peroxyl radicals when compared to that of several other fruits from the literature, including grape, strawberry, cranberry, and walnuts, which are known references in terms of antioxidants. This is the first report that demonstrates jua pulp’s potential as an alternative source of ellagic acid and other phenolic acids and flavonoids. Therefore, the outcome of this study provides new information that can be useful for functional food and nutraceutical industries.     

A Pilot-Scale Supercritical Carbon Dioxide Extraction to Valorize Colombian Mango Seed Kernel

Colombian mango production, which exceeded 261,000 t in 2020, generates about 40% of the whole fruit as solid waste, of which more than 50% are seed kernels (over 52,000 t solid by-product); though none is currently used for commercial purposes. This study reports the results of the supercritical carbon dioxide (scCO₂) extraction of an oil rich in essential fatty acids (EFAs) from revalorized mango seed kernels and the optimization of the process by the Response Surface Methodology (RSM). In pilot-scale scCO₂ experiments, pressure (23–37 MPa) and temperature (52–73 °C) were varied, using 4.5 kg of CO₂. The highest experimental oil extraction yield was 83 g/kg (37 MPa and 63 °C); while RSM predicted that 84 g/kg would be extracted at 35 MPa and 65 °C. Moreover, by fine-tuning pressure and temperature it was possible to obtain an EFA-rich lipid fraction in linoleic (37 g/kg) and α-linolenic (4 g/kg) acids, along with a high oleic acid content (155 g/kg), by using a relatively low extraction pressure (23 MPa), which makes the process a promising approach for the extraction of oil from mango waste on an industrial scale, based on a circular economy model.     

Bioaccessibility and Cellular Uptake of Carotenoids Extracted from Bactris gasipaes Fruit: Differences between Conventional and Ionic Liquid-Mediated Extraction

Currently, on an industrial scale, synthetic colorants are used in many fields, as well as those extracted with conventional organic solvents (COSs), leading to several environmental issues. Therefore, we developed a sustainable extraction and purification method mediated by ionic liquids (IL), which is considered an alternative high-performance replacement for COSs. Carotenoids are natural pigments with low bioaccessibility (BCT) and bioavailability (BV) but with huge importance to health. To investigate if the BCT and cellular uptake of the carotenoids are modified by the extraction method, we conducted a comparison assay between both extraction procedures (IL vs. COS). For this, we used the Amazonian fruit Bactris gasipaes, a rich source of pro-vitamin A carotenoids, to obtain the extract, which was emulsified and subjected to an in vitro digestion model followed by the Caco-2 cell absorption assay. The bioaccessibility of carotenoids using IL was better than those using COS (33.25%, and 26.84%, respectively). The cellular uptake of the carotenoids extracted with IL was 1.4-fold higher than those extracted using COS. Thus, IL may be a feasible alternative as extraction solvent in the food industry, replacing COS, since, in this study, no IL was present in the final extract.     

Critical assessment of three high performance liquid chromatography analytical methods for food carotenoid quantification

Three sets of extraction/saponification/HPLC conditions for food carotenoid quantification were technically and economically compared. Samples were analysed for carotenoids α-carotene, β-carotene, β-cryptoxanthin, lutein, lycopene, and zeaxanthin. All methods demonstrated good performance in the analysis of a composite food standard reference material for the analytes they are applicable to. Methods using two serial connected C₁₈ columns and a mobile phase based on acetonitrile, achieved a better carotenoid separation than the method using a mobile phase based on methanol and one C₁₈-column. Carotenoids from leafy green vegetable matrices appeared to be better extracted with a mixture of methanol and tetrahydrofuran than with tetrahydrofuran alone. Costs of carotenoid determination in foods were lower for the method with mobile phase based on methanol. However for some food matrices and in the case of E–Z isomer separations, this was not technically satisfactory. Food extraction with methanol and tetrahydrofuran with direct evaporation of these solvents, and saponification (when needed) using pyrogallol as antioxidant, combined with a HPLC system using a slight gradient mobile phase based on acetonitrile and a stationary phase composed by two serial connected C₁₈ columns was the most technically and economically favourable method.     

Reasons for the decomposition of the fungicide thiram during preparation of fruit and vegetable samples and consequences for residue analysis

The concentration of thiram in aqueous solution decreases by 50–75% within 20 min in the presence of cut pieces of apple, cucumber or celeriac with a section surface area of 160 cm² each. The decomposition rate is predominantly influenced by the section surface area of the cut fruit and vegetable samples. Denaturing reaction conditions (exchange of the solvent water by methanol; boiling of sample material) will significantly slow down the decomposition rate. It was concluded that the thiram decomposition had been caused by enzymes on the section surface of the fruit and vegetable samples. For a specific determination of thiram, a simple rinsing of the intact fruit and vegetable material was appropriate as extraction method. For the screening of thiram residues, the often used Keppel method, which determines CS₂ from thiram or dithiocarbamates seems to be applicable even if samples had been coarsely cut, since decomposition of the CS₂-forming intermediates is slower than the breakdown of thiram itself. Therefore, specific determination of thiram is necessary only, if maximum residue limits for dithiocarbamates are not adhered to.     

Extraction and chromatography of carotenoids from pumpkin

Vitamin A deficiency is a health problem in Southeast Asia that can be corrected by feeding orange fruits and vegetables such as mango. Pumpkin is a traditional Korean food that is easy to store and is already believed to have health benefits. We extracted carotenoids from pumpkin by liquid-liquid extraction and by supercritical fluid extraction. We measured carotenoids by reversed-phase chromatography with diode array detection. The major carotenoid in pumpkin (> 80%) is beta-carotene, with lesser amounts of lutein, lycopene, alpha-carotene and cis-beta-carotene. Pumpkin is a rich source of beta-carotene and might be useful for preventing Vitamin A deficiency.     

Research method of rapid determination of chiral pesticide fenpropathrin enantiomers in fruit and vegetable puree by supercritical fluid chromatography

A method is first established for the separation and determination of fenpropathrin enantiomer residues in apple puree, strawberry puree, and tomato puree considered a supplementary food for infants by supercritical fluid chromatography. After the sample was extracted with acetonitrile and cleaned up by a solid-phase extraction column, then it was separated by a CHIRALPAK AD-3 chiral column with gradient elution at a flow rate of 1.5 mL/min using methanol and supercritical carbon dioxide as the mobile phase, detected by ultraviolet detector at 230 nm wavelength and quantified with the external standard method. The limits of quantification of the two fenpropathrin enantiomers were both 0.2 mg/kg, the linear ranges were 1.0–20.0 mg/L with linear correlation coefficients greater than 0.9992, the recoveries in the spiked samples at 0.2, 0.4 and 2.0 mg/kg were from 80.6 to 105%, and the relative standard deviation reached 2.6–7.7%. This method has the advantages of convenient operation, good resolution, and environmental protection, which can satisfy the requirement of determination for fenpropathrin enantiomer residues in fruit and vegetable puree as supplementary food for infants.     

Direct online extraction and determination by supercritical fluid extraction with chromatography and mass spectrometry of targeted carotenoids from red Habanero peppers (Capsicum chinense Jacq.)

Recently, supercritical fluid chromatography coupled to mass spectrometry has gained attention as a fast and useful technology applied to the carotenoids analysis. However, no reports are available in the literature on the direct online extraction and determination by supercritical fluid extraction with chromatography and mass spectrometry. The aim of this research was the development of an online method coupling supercritical fluid extraction and supercritical fluid chromatography for a detailed targeted native carotenoids characterization in red habanero peppers. The online nature of the system, compared to offline approaches, improves run‐to‐run precision, enables the setting of batch‐type applications, and reduces the risks of sample contamination. The extraction has been optimized using different temperatures, starting from 40°C up to 80°C. Multiple extractions, until depletion, were performed on the same sample to evaluate the extraction yield. The range of the first extraction yield, carried out at 80°C, which was the best extraction temperature, was 37.4–65.4%, with a %CV range of 2–12. Twenty‐one targeted analytes were extracted and identified by the developed methodology in less than 17 min, including free, monoesters, and diesters carotenoids, in a very fast and efficient way. Quantification of the β‐carotene was carried out by using the optimized conditions.     

Phenolic-compound-extraction systems for fruit and vegetable samples

This paper reviews the phenolic-compound-extraction systems used to analyse fruit and vegetable samples over the last 10 years. Phenolic compounds are naturally occurring antioxidants, usually found in fruits and vegetables. Sample preparation for analytical studies is necessary to determine the polyphenolic composition in these matrices. The most widely used extraction system is liquid-liquid extraction (LLE), which is an inexpensive method since it involves the use of organic solvents, but it requires long extraction times, giving rise to possible extract degradation. Likewise, solid-phase extraction (SPE) can be used in liquid samples. Modern techniques, which have been replacing conventional ones, include: supercritical fluid extraction (SFE), pressurized liquid extraction (PLE), microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE). These alternative techniques reduce considerably the use of solvents and accelerate the extraction process.     

Valorization of Fermented Shrimp Waste with Supercritical CO2 Conditions: Extraction of Astaxanthin and Effect of Simulated Gastrointestinal Digestion on Its Antioxidant Capacity

Lactic acid fermentation increases the bioactive properties of shrimp waste. Astaxanthin is the principal carotenoid present in shrimp waste, which can be found esterified in the liquid fraction (liquor) after its lactic acid fermentation. Supercritical CO₂ technology has been proposed as a green alternative to obtain astaxanthin from fermented shrimp waste. This study aimed to optimize astaxanthin extraction by supercritical CO₂ technology from fermented liquor of shrimp waste and study bioaccessibility using simulated gastrointestinal digestion (GD) of the optimized extract. A Box–Behnken design with three variables (pressure, temperature, and flow rate) was used to optimize the supercritical CO₂ extraction. The optimized CO₂ extract was obtained at 300 bar, 60 °C, and 6 mL/min, and the estimated characteristics showed a predictive extraction yield of 11.17%, antioxidant capacity of 1.965 mmol of Trolox equivalent (TE)/g, and astaxanthin concentration of 0.6353 µg/g. The experiment with optimal conditions performed to validate the predicted values showed an extraction yield of 12.62%, an antioxidant capacity of 1.784 mmol TE/g, and an astaxanthin concentration of 0.52 µg/g. The astaxanthin concentration decreased, and the antioxidant capacity of the optimized extract increased during gastrointestinal digestion. In conclusion, our optimized supercritical CO₂ process is suitable for obtaining astaxanthin from shrimp by-products after lactic acid fermentation.     

Experimental Design and Optimization of Recovering Bioactive Compounds from Chlorella vulgaris through Conventional Extraction

Microalgae contain an abundance of valuable bioactive compounds such as chlorophylls, carotenoids, and phenolics and, consequently, present great commercial interest. The aim of this work is the study and optimization of recovering the aforementioned components from the microalgae species Chlorella vulgaris through conventional extraction in a laboratory-scale apparatus using a “green” mixture of ethanol/water 90/10 v/v. The effect of three operational conditions—namely, temperature (30–60 °C), duration (6–24 h) and solvent-to-biomass ratio (20–90 mL_solv/g_biom), was examined regarding the extracts’ yield (gravimetrically), antioxidant activity, phenolic, chlorophyll, and carotenoid contents (spectrophotometric assays), as well as concentration in key carotenoids, i.e., astaxanthin, lutein, and β-carotene (reversed-phase–high-performance liquid chromatography (RP–HPLC)). For this purpose, a face-centered central composite design (FC-CCD) was employed. Data analysis resulted in the optimal extraction conditions of 30 °C, for 24 h with 37 mL_solv/g_biom and validation of the predicted models led to 15.39% w/w yield, 52.58 mg_extr/mg_DPPH (IC50) antioxidant activity, total phenolic, chlorophyll, and carotenoid content of 18.23, 53.47 and 9.92 mg/g_extr, respectively, and the total sum of key carotenoids equal to 4.12 mg/g_extr. The experimental data and predicted results were considered comparable, and consequently, the corresponding regression models were sufficiently reliable for prediction.     

Screening and confirmation of PAHs in vegetable oil samples by use of supercritical fluid extraction in conjunction with liquid chromatography and fluorimetric detection

A fast, simple, non-destructive method for the direct screening of polycyclic aromatic hydrocarbons (PAHs) in vegetable oil samples is proposed. The method uses a supercritical fluid extraction (SFE) system coupled on-line with a fluorimetric detector to determine PAHs. This special assembly avoids the main problems encountered in the determination of PAHs in complex matrices such as vegetable oils. PAHs are selectively extracted by using silica gel in the thimble and cleaned up by passage through a C18 column. Interferences are preferentially retained by the silica gel during the SFE process while PAHs are adsorbed in the C18 column and the remainder of the matrix is sent to waste. Finally, the C18 column is purged to remove residual CO₂ gas and adsorbed PAHs are recovered by desorption with a solvent. The extracts from positive samples are subsequently analyzed by liquid chromatography (LC) with fluorescence detection. The proposed method allows the confirmation of vegetable oil safety and hence provides a new tool for consumer protection.     

Preliminary Evaluation of Supercritical Carbon Dioxide Extracted Dabai Pulp Oleoresin as a New Alternative Fat

There has been growing interest among food scientists in producing a toxin-free fat as an end product with varying physical or nutritional properties of interest to the food industry. Oleoresin is a rich source of bioactive compounds which consumers can easily add to a large variety of food. Dabai (Canarium odontophyllum) pulp oleoresin (DPL) was extracted using supercritical carbon dioxide (SC-CO₂) extraction, a green extraction technology. This study investigates the quality of SC-CO₂ extracted DPL in discovering its potential as a new alternative fat. The extraction experiment was carried out at a pressure of 40 MPa and a temperature of 40 °C. DPL is a saturated fatty acid (SFA)-rich fat due to its high SFA composition (47.72 ± 0.01%). In addition, the low content of peroxide value (PV) (5.60 ± 0.09 mEq/kg) and free fatty acids (FFA) (3.40 ± 0.03%) indicate the quality and stability of DPL for various applications besides food consumption. DPL also has a low slip melting point (SMP) (20.20 ± 0.03 °C), and HPLC-FID revealed that DPL contained 0.13 ± 0.02 mg/100 g of vitamin E (α-tocopherol), indicating its potential application as a solid fat with a bioactive compound. This present work demonstrates the possible prospect of DPL in the formulation of end products for food industries.     

Effect of CO2 Flow Rate on the Extraction of Astaxanthin and Fatty Acids from Haematococcus pluvialis Using Supercritical Fluid Technology

Haematococcus pluvialis is the largest producer of natural astaxanthin in the world. Astaxanthin is a bioactive compound used in food, feed, nutraceutics, and cosmetics. In this study, astaxanthin extraction from H. pluvialis by supercritical fluid extraction was evaluated. The effects of temperature (40 and 50 °C), pressure (40 and 50 MPa), and CO₂ flow rate (2 and 4 L/min) were investigated. The results showed that the highest astaxanthin recovery was obtained at 50 °C/50 MPa and the CO₂ flow rates evaluated had no significant effect. It was possible to achieve astaxanthin recoveries of 95% after 175 min for a CO₂ flow rate of 2 L/min, and 95 min for CO₂ flow rate of 4 L/min. The ω-6/ω-3 ratios obtained were similar in all conditions, reaching 0.87, demonstrating that the extracts from H. pluvialis by SFE are rich in unsaturated fatty acids (UFA) which increases their positive effects when used as a functional ingredient in food.     

Solid Dosage Forms of Biopharmaceuticals in Drug Delivery Systems Using Sustainable Strategies

Drug delivery systems (DDS) often comprise biopharmaceuticals in aqueous form, making them susceptible to physical and chemical degradation, and therefore requiring low temperature storage in cold supply and distribution chains. Freeze-drying, spray-drying, and spray-freeze-drying are some of the techniques used to convert biopharmaceuticals-loaded DDS from aqueous to solid dosage forms. However, the risk exists that shear and heat stress during processing may provoke DDS damage and efficacy loss. Supercritical fluids (SCF), specifically, supercritical carbon dioxide (scCO₂), is a sustainable alternative to common techniques. Due to its moderately critical and tunable properties and thermodynamic behavior, scCO₂ has aroused scientific and industrial interest. Therefore, this article reviews scCO₂-based techniques used over the year in the production of solid biopharmaceutical dosage forms. Looking particularly at the use of scCO₂ in each of its potential roles—as a solvent, co-solvent, anti-solvent, or co-solute. It ends with a comparison between the compound’s stability using supercritical CO₂-assisted atomization/spray-drying and conventional drying.     

Grape seed oil extraction: Interest of supercritical fluid extraction and gas-assisted mechanical extraction for enhancing polyphenol co-extraction in oil

The aim of this study is to compare three oil extraction methods and to evaluate their efficiency for producing an oil rich in polyphenols. The three extraction methods are screw pressing, extraction by supercritical CO₂ percolation and the combination of these two processes (Gas-Assisted Mechanical Expression: GAME). Screw pressing is the most efficient process for producing grape seed oil with a high yield, but supercritical CO₂ process permits an increase of polyphenol co-extraction with oil. The GAME process allows extraction of more polyphenols than screw pressing and constitutes an interesting process considering oil yield.     

Microwave‐assisted preparation of poly(ionic liquids)‐modified magnetic nanoparticles for pesticide extraction

Novel poly(ionic liquids) were synthesized and immobilized on prepared magnetic nanoparticles, which were used to extract pesticides from fruit and vegetable samples by dispersive solid‐phase extraction prior to high‐performance liquid chromatography analysis. Compared with monomeric ionic liquids, poly(ionic liquids) have a larger effective contact area and higher viscosity, so they can achieve higher extraction efficiency and be used repeatedly without a decrease in analyte recovery. The immobilized poly(ionic liquids) were rapidly separated from the sample matrix, providing a simple approach for sample pretreatment. The nature and volume of the desorption solvent and amount of poly(ionic liquid)‐modified magnetic material were optimized for the extraction process. Under optimum conditions, calibration curves were linear (R² > 0.9988) for pesticide concentrations in the range of 0.100–10.000 μg/L. The relative standard deviations for repeated determinations of the four analytes were 2.29–3.31%. The limits of detection and quantification were 0.29–0.88 and 0.97–2.93 μg/L, respectively. Our results demonstrate that the developed poly(ionic liquid)‐modified material is an effective absorbent to extract pesticides from fruit and vegetable samples.