Oligomers of stereoregular polymers

The embryonic state of the ionic methyl methacrylate (MMA) and of trihaloacetaldehyde polymerization was studied. The composition of the oligomer mixtures, the end groups and the stereochemistry of individual compounds of the oligomers was investigated. Depending upon the initiating systems the oligomerization of methyl methacrylate can give either isotactic or syndiotactic oligomers. Trihaloacetaldehye oligomerization is highly dependent on the ceiling temperature of polymerization. The oligomerization of fluoral and chloral is compared with a more detailed study of the bromal polymerization and even more interestingly with the cooligomerization of chloral and bromal.     

Uniform polymer in synthetic polymer chemistry

The preparation of uniform polymers and their use in fundamental polymer chemistry are reviewed. A typical method of preparation is a combination of living polymerization and supercritical fluid chromatography separation. Synthetic uniform polymers allow us to solve ambiguous problems in polymer chemistry due to molecular weight distribution and are of significant importance for studies on structure–property relationships. A close inspection of an isotactic uniform chloral oligomer with a symmetrical chemical structure reveals that oligomers are the first examples of stable atropisomers of aldehyde oligomers and that their chiroptical properties are due only to their helical geometries. A molecular-level understanding of the mechanism and stoichiometry of the association process of polymer molecules is possible only with uniform polymers, and stereocomplex formation between isotactic and syndiotactic poly(methyl methacrylate)s in acetone has vigorously been studied by size exclusion chromatography (SEC) and NMR. End-functionalized uniform polymers have enabled us to prepare uniform polymer architectures, such as block, graft, comb, and star polymers. A uniform stereoblock poly(methyl methacrylate) with an isotactic (methyl methacrylate)₄₆-syndiotactic (methyl methacrylate)₄₆ structure shows a single SEC peak in chloroform but three peaks in acetone, which are ascribable to intermolecularly and intramolecularly associated complexes and nonassociated molecules. A three-arm star polymer with one isotactic chain and two syndiotactic chains shows a peculiar SEC behavior in acetone due to a braid type of intramolecular stereocomplex formation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 416–431, 2004     

Inhibition by red phosphorus of unimolecular thermal chain-scission in poly(methyl methacrylate): Investigation by NMR,FT-IR and laser desorption/fourier transform mass spectroscopy

The reaction of red phosphorus with poly(methyl methacrylate) under pyrolysis conditions was investigated with a number of physical techniques. A random methyl methacrylate/cyclic anhydride copolymer is formed from atatic PMMA, whereas a random methyl methacrylate/methacrylic acid copolymer is obtained with isotactic PMMA. The backbones of both these copolymers are more stable toward depolymerization than that of PMMA. The flame-retardant activity of red phosphorus with PMMA may arise in part from stabilization of the polymer toward depolymerization via modification of the sidechains.     

Identification of a stereoblock poly(methyl methacrylate) sample with a stereocomplex

Acid hydrolysis of a stereoblock poly(methyl methacrylate) sample leads to a mixture of isotactic and syndiotactic poly(methacrylic acid) which can be separated by electrophoresis. The experiment confirms the stereochemical identity between the so-called “stereoblock” poly(methyl methacrylate) and the stereocomplex which syndiotactic and isotactic poly(methyl methacrylate) form in the ratio 2:1. A possible mechanism of replica polymerization is suggested to account for this effect.     

Methacrylic acid and methyl methacrylate oligomers adsorbed to porous isotactic poly(methyl methacrylate) ultrathin films and mechanistic studies of living template polymerization

Methacrylic acid (MAA), methyl methacrylate (MMA), methacrylamide, and oligomers of MAA and MMA were selected as a model of active radical species in living template polymerization using stereocomplex formation. The adsorption behaviors of the aforementioned model compounds were examined toward porous isotactic‐(it‐) poly(methyl methacrylate) (PMMA) ultrathin films on a quartz crystal microbalance, which was prepared by the extracting of syndiotactic‐(st‐) poly(methacrylic acid) (PMAA) from it‐PMMA/st‐PMAA stereocomplexes. The apparent predominant adsorption of oligomers to monomers was observed in both PMAA and PMMA oligomers, suggesting that the mechanism of template polymerization follows the pick up mechanism. Although vinyl monomers were not incorporated into the porous it‐PMMA ultrathin film, both PMMA and PMAA oligomers were adsorbed at the initial stages. However, adsorbed amounts were limited to about 5 and 15% at 0.1 mol L^?1, respectively, which are much smaller values than corresponding st‐polymers. The results imply that radical coupling reaction is prevented during template polymerization to support the resulting living polymerization. ATR‐IR spectral patterns of oligomer complexes and it‐PMMA slightly changed in both cases, suggesting complex formation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5879–5886, 2008     

Influence of the polymerization temperature on the stereoregularity of radical poly(phenyl methacrylate)

The dependence of the tacticity of radical poly(phenyl methacrylate) upon polymerization temperature has been examined by NMR spectroscopy. Bernouillian statistics were confirmed for polymerization temperatures between 30 and 80°, but slight deviation was found for elevated temperatures (100°). The calculated values of differential enthalpies and entropies of activation for isotactic and syndiotactic propagations revealed that poly(methyl methacrylate) radicals grow more easily in syndiotactic placement than poly(phenyl methacrylate) radicals.     

Preparation of magnetic nanoparticles by the use of self-assembled fluorinated oligomeric aggregates—A new approach to the dispersion of magnetic particles on poly(methyl methacrylate) film surface

Fluoroalkyl end-capped acrylic acid oligomer-encapsulated magnetic nanoparticles were prepared by the coprecipitation of aqueous ferric and ferrous ions in the presence of the corresponding oligomers under alkaline conditions. The dynamic light scattering measurements showed that these fluorinated oligomer magnetic nanoparticles were encapsulated in the self-assemblies of fluoroalkyl end-capped oligomers. Fluoroalkyl end-capped oligomer-encapsulated magnetic nanoparticles thus obtained were applied to the dispersion of magnetic particles on the poly(methyl methacrylate) film surface to exhibit not only the surface active property imparted by fluorine but also magnetic behavior toward a permanent magnet.     

Synthesis and Mechanical Properties of Polypropylene-based Polymer Hybrids via Controlled Radical Polymerization

Isotactic polypropylene-based graft copolymers linking poly(methyl methacrylate), poly(n-butyl acrylate) and polystyrene were successfully synthesized by a controlled radical polymerization with isotactic polypropylene (iPP) macroinitiator. The hydroxylated iPP, prepared by propylene/10-undecen-1-ol copolymerization with a metallocene/methyl-aluminoxane/triisobutylaluminum catalyst system, was treated with 2-bromoisobutyryl bromide to produce a Br-group containing iPP (PP-g-Br). The resulting PP-g-Br could initiate controlled radical polymerization of methyl methacrylate, n-butyl acrylate and styrene by using a copper catalyst system, leading to a variety of iPP-based graft copolymers with a different content of the corresponding polar segment. These graft copolymers demonstrated unique mechanical properties dependent upon the kind and content of the grafted polar segment.     

New initiator system for the anionic polymerization of (meth)acrylates in toluene. IV. Random copolymerization of (meth)acrylates in toluene initiated by s-BuLi ligated by lithium silanolates

Copolymerization of binary mixtures of alkyl (meth)acrylates has been initiated in toluene by a mixed complex of lithium silanolate  (s-BuMe₂SiOLi) and s-BuLi (molar ratio > 21) formed in situ by reaction of s-BuLi with hexamethylcyclotrisiloxane (D₃). Fully acrylate and methacrylate copolymers, i.e., poly(methyl acrylate-co-n-butyl acrylate), poly(methyl methacrylate-co-ethyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate) of a rather narrow molecular weight distribution have been synthesized. However, copolymerization of alkyl acrylate and methyl methacrylate pairs has completely failed, leading to the selective formation of homopoly(acrylate). As result of the isotactic stereoregulation of the alkyl methacrylate polymerization by the s-BuLi/s-BuMe₂SiOLi initiator, highly isotactic random and block copolymers of (alkyl) methacrylates have been prepared and their thermal behavior analyzed. The structure of isotactic poly(ethyl methacrylate-co-methyl methacrylate) copolymers has been analyzed in more detail by Nuclear Magnetic Resonance (NMR). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2525–2535, 1999     

Isotactic Regulation in the Radical Polymerization of Calcium Methacrylate: Is Multiple Chelation the Key to Stereocontrol?

Accurate quantum chemistry is used to explain the origins of isospecificity in radical polymerization of calcium methacrylate hydrate (CaMA). Distonic radical–cation interactions are shown to be crucial in determining the reactivity of different coordination structures. Cation coordination to the terminal and incoming monomer side chains reduces radical-cation separation, enhancing the reactivity of these modes over the stereocontrolling terminal-penultimate binding modes. This explains why Lewis acid-mediated radical polymerization often fails to produce highly isotactic polymer for common monomers such as methyl methacrylate. However, theoretical calculations suggest that the poly(CaMA) terminus forms a chelated bridging scaffold in N,N-dimethylformamide (DMF), which involves the terminal, penultimate and incoming monomer carboxylate groups. This scaffold simultaneously activates the incoming monomer toward propagation and regulates the relative orientation of the terminal and penultimate side chains. The bridging scaffold is disrupted in more polar solvents and/or if alternative nonchelating counter-cations are employed, leading to loss of isotactic control. These results suggest that higher levels of isotactic control may be achievable if reaction conditions are optimized to favor bridging scaffold formation. The broader importance of these findings to stereocontrol in radical polymerization is also discussed. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 52–61     

Nuclear magnetic resonance studies of polymer solutions. I. Poly(methyl methacrylates)

The microscopic interactions of solvent with the diastereoisomeric units of isotactic and syndiotactic poly(methyl methacrylate) have been studied by high-resolution nuclear magnetic resonance. The changes in chemical shifts in various solvents were compared with those of low molecular weight analogs, methyl acetate, and methyl propionate. These changes are caused mainly by the ring-current effect, which has been found to be larger for the low molecular weight analogs than for the polymer. This is especially true when the protons on the polymer backbone are compared with the corresponding ones in the low molecular weight compounds. As one changes from a chloroform solvent to an aromatic solvent, the displacements of the chemical shifts of the polymer can be expressed as percentages of the corresponding shifts of methyl acetate. For syndiotactic poly(methyl methacrylate) in chlorobenzene, benzene, and α-chloronaphthalene, respectively, the percentages are 82, 93, 75 for ester protons; 35, 29, 17 for the backbone methylene protons; and 18, 6.7, 0 for the backbone α-methyl protons. For isotactic poly(methyl methacrylate) in chlorobenzene and benzene, respectively, the percentages are 71, 76 for the ester protons; 41, 38 for the backbone methylene protons; and 41, 32 for the backbone α-methyl protons. These results are discussed in terms of the local stereochemistry of the polymer systems. The exploitation of procedures of this sort in revealing details of polymer behavior in solution indicates dramatic possibilities for future investigations.     

A cationic bridged zirconocene complex as the catalyst for the stereospecific polymerization of methyl methacrylate

The cationic bridged zirconocene complex [iPr(Cp)(Ind)Zr(Me)(THF)][BPh₄] ( 1 ‐BPh₄) was synthesized. Polymerization of methyl methacrylate with 1 ‐BPh₄ in CH₂Cl₂ at temperatures between –20 and 20°C led to the formation of isotactic poly(methyl methacrylate). The low polydispersity index of the polymer obtained and a successful two step polymerization of methyl methacrylate with 1 ‐BPh₄ are hints towards a living polymerization mechanism. ¹H and ¹³C NMR analysis revealed an enantiomorphic site‐controlled mechanism for the formation of isotactic poly(methyl methacrylate).     

Pressure dependence of the thermal conductivity,thermal diffusivity,and specific heat of some polymers

The pressure dependence of the specific heat of poly(methyl methacrylate), polystyrene, and atactic and isotactic polypropylene was determined from simultaneous measurements of thermal conductivity and diffusivity in a cylindrical geometry at 300°K and in the pressure range 0–37 kbar. The thermal conductivity and the diffusivity both increase strongly with pressure, while the specific heat decreases. The pressure dependencies are most pronounced at low pressures. The results are compared with other experimental results and with theoretical calculations.     

聚甲基丙烯酸甲酯辐射裂解和消旋的空间立构效应

本文研究了三种不同空间立构聚甲基丙烯酸甲酯的辐射效应,提出裂解过程是一种裂解与重合的动态平衡过程。分子量降低和消旋作用对温度的依赖性,是由于分子运动和笼罩效应以及重合的空间位阻效应所致。辐照温度愈高,裂解产额愈大。相同条件下辐照,全同立构比无规立构试样的裂解产额更大。 全同立构聚甲基丙烯酸甲酯辐照后,不仅分子链断裂,而且空间立构也发生很大变化。随着辐照剂量的增加,全同立构含量逐渐减少,而无规立构含量和间同立构含量却逐渐增加。     

Synthesis of new,functionalized poly(butyl vinyl ether) oligomers and novel copolymers containing these materials

This paper reports the synthesis and characterization of new, functionalized poly(alkyl vinyl ether) oligomers, and block copolymers containing poly(alkyl vinyl ether) and poly(methyl methacrylate). Using the HI/ZnI₂ initiating system in nonpolar solvents (hexane, toluene) at −20°C, both monofunctional and difunctional poly(alkyl vinyl ether) oligomers of predicted molecular weights precisely terminated with aldehyde, primary hydroxyl and ester endgroups have been prepared. Novel diblock copolymers comprised of poly(methyl methacrylate) and poly(butyl vinyl ether) have also been synthesized using a combination of living cationic and living group transfer polymerization.     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. VIII. Polymerization of styrene and methyl methacrylate adsorbed on aerosil

Aerosil is silica having a purity which is very high compared with that of silica gel and having, unlike silica gel, no micropores. To investigate the effects of impurities and micropores on the radiation-induced polymerization of styrene and methyl methacrylate adsorbed on silica gel, the radiation-induced polymerization of styrene and methyl methacrylate adsorbed on Aerosil was carried out. The results of both the styrene–Aerosil 300 system and the methyl methacrylate–Aerosil 300 system were similar to those of the styrene–silica gel and methyl methacrylate–silica gel systems, respectively. This suggests that in the radiation-induced polymerization of both styrene–silica gel and methyl methacrylate–silica gel systems the impurity and the presence of micropores have almost no effects on the reaction mechanism. The effect of aluminum as an impurity was investigated on the styrene–Aerosil MOX 170 system. It was found that aluminum accelerated the cationic polymerization.     

Infrared studies of stereoregular polymerization of methyl methacrylate and methacrylonitrile by organometallic compounds

Infrared spectra of reaction mixtures of methyl methacrylate or methacrylonitrile with an equimolar amount of organometallic compounds were investigated in relation to the stereoregulating ability of the catalysts in polymerization. It was found that the carbonyl or nitrile stretching frequency correlated with the stereoregularity of polymers prepared with the corresponding catalysts; i.e., the higher the frequency, the higher the isotacticity. From these results a mechanism of isotactic polymer formation was proposed, in which catalyst counterion was located near the carbonyl group in polymer terminal and that of monomer to be reacted, and consequently the isotactic polymerization is facilitated.     

Vinyl polymerization by lithium organocuprates

Vinyl polymerizations initiated by lithium organocuprates under several conditions were investigated. It was observed that this catalyst was effective in the polymerization of specific monomers such as α,β-unsaturated nitrile and carbonyl analogues. The rate of polymerization was rapid but retarded by the addition of pyridine, nitrobenzene, or hydroquinone. Polymerization of methyl methacrylate (MMA) with lithium di-n-butylcuprate as initiator produces predominantly isotactic poly(methyl methacrylate) (PMMA) in toluene. The overall activation energy was estimated as 3.5 kcal/mol deg. Lithium di-n-butylcuprate exerts a higher stereoregulating effect on the addition of monomers than other organolithium initiators. It is proposed that polymerization proceeds via a coordinated anionic mechanism.     

Crystallization,morphology, structure and miscibility of poly(ethylene oxide) based blends

Results of an investigation on the morphology, structure, isothermal crystallization, thermal behaviour and miscibility of poly(ethylene oxide) (PEO) based binary blends are reported. In particular poly(vinyl acetate)(PVAc), poly(methyl methacrylate) (PMMA) at different tacticity and poly(ethyl methacrylate) (PEMA) were added to PEO. It was found that with the only exception of isotactic poly(methyl methacrylate) (IPMMA), the addition of the above cited components causes a depression in both the spherulite growth rate and the overall kinetic rate constant. The experimental G and Kn were analyzed by means of the latest kinetic theory in order to determine the influence of composition on the process of surface secondary nucleation. The optical microscopy of thin films of the sample revealed that the blends crystallized with volume filling crystals at least up to 50/50 blend composition. The small angle X-ray scattering curves were analyzed using a recently developed methodology. The structural properties of the blends were attributed to the presence of the non crystallizable material in the interlamellar or interfibrillar regions of PEO. From the glass transition temperature it has been deduced that an homogeneous amorphous phase is present for all the blends except for the PEO/IPMMA amorphous system. For the system PEO/atactic poly(methyl methacrylate) (APMMA) the miscibility was also predicted by theoretical approaches.