Studies on the separation of anions with 8-hydroxy-quinolinium ion as counterion

Distribution constants, K_D, for 8-hydroxyquinolinium-anion pairs and for a series of inorganic and organic anions are reported between aqueous acidic phases and 1-butanol and 3-methyl-1-butanol. As expected, K_D values are larger for anions with relatively large crystal radius (e.g., Cl^- < I^- < R-SO₃^-), smaller for anions containing either hydroxyl or carboxyl groups favoring solvation by water (e.g., HSO₄^-, HSeO₃^-, H₂PO₄^-, C₆H₅COO^-, CH₃COO^-) and larger in solvents with larger solubility parameters (e.g., 4-methyl-2-pentanone < 3-methyl-1-butanol < 1-butanol). Distribution constants between aqueous solutions and 8-hydroxyquinoline immobilized (chemically) on controlled-pore glass are estimated for a series of aromatic and aliphatic sulfonates. Aromatic sulfonates show substantially larger K_D values than aliphatic sulfonates. Batch equilibration data were used to design chromatographic (liquid-solid) separation of a few sulfonates.     

Water‐Soluble Thermoresponsive α‐Helical Polypeptide with an Upper Critical Solution Temperature: Synthesis,Characterization, and Thermoresponsive Phase Transition Behaviors

Water‐soluble polypeptides bearing 1‐alkylimidazolium (methyl or n‐butyl) and various counter‐anions (i.e., Cl⁻, I⁻ or BF₄⁻) are prepared by ring‐opening polymerization of γ‐4‐chloromethylbenzyl‐_l‐glutamate‐based N‐carboxyanhydride ( 3 ), post‐polymerization of poly(γ‐4‐chloromethylbenzyl‐_l‐glutamate) ( 4 ), and ion‐exchange reaction. Circular dichroism (CD) analysis reveals that the resulting polypeptides adopt an α‐helical conformation in water with a fractional helicity in the range of 30%–56% at 20 °C and exhibit good conformational stability against temperature variations. The polypeptides exhibit lower critical solution temperature (LCST)‐type or upper critical solution temperature (UCST)‐type transitions in organic solvents or in water. The UCST‐type transition temperature (T_pt) in water is independent on the molecular weight, yet it decreases upon addition of NaCl and increases upon addition of NaI or NaBF₄, suggesting a mainly electrostatic interaction mechanism.

     

Anion exchangers functionalized by chelating reagents (AnChel) for preconcentration of trace elements: Capabilities and limitations

Summary Conventional anion exchangers (e.g., Adsorbex SAX, Amberlite IRA 410, Dowex 1X8, Lewatit MP 5080, TEAE cellulose) functionalized by means of sulfonated metal reagents (e.g., Arsenazo III, Eriochrome Red B, 8-hydroxyquinoline-5-sulfonic acid, Tiron and others) were investigated as collectors (AnChel) for analytical preconcentration of trace elements. In particular, the stability of AnChel strongly depending on competing anions, on the anion exchanger and on the metal reagent chosen, was characterized. Accordingly, for appropriate combinations of AnChel (e.g., Dowex 1X8/Arsenazo III) reagent distribution coefficients K_d in the range 10⁴ to 10⁵ (ml/g) could be attained on polystyrene-based anion exchangers even in concentrated salt solutions (e.g., 4 mol/l NaCl), but not on hydrophilic exchangers (e.g., SAX, TEAE cellulose). In general, the stability of AnChel against competing anions followed the order Cl^–>SO ₄ ^2– >NO ₃ ^– >ClO ₄ ^– . Reagent loadings of about 1 mmol/g (e.g., 8-hydroxyquinoline S) on the anion exchangers were obtainable. Trace metals precomplexed with the reagents cited could be separated (>90%) within 5 min and remobilized by acid (e.g. 2 mol/l HNO₃) within some 10 s (batch procedure). Using small columns filled with anion exchanger (e.g., 0.25 g Dowex 1X8) fast trace-matrix separations were carried out with 8-hydroxyquinoline S (Cu, Fe, In, Mn, Pb, Zn) in MgCl₂ solutions and with Arsenazo III (U, Th) in AlCl₃ solution, respectively. For subsequent trace determinations the flame-AAS (injection technique) was applied, except for Th and U [quantified by total reflection X-ray fluorescence (TXRF)].     

One decade of research on ion-selective electrodes in Iran (1996–2006)

This review presents a general overview about the development of ion-selective electrodes in Iran during the past decade (1996–2006). All of the reported ion-selective sensors (for cations, anions and organic species) are cited in this review. Sensors for 39 cations, 12 anions, and 23 organic compounds and drugs have been reported in this reivew. Some of the main group cations (e.g. beryllium) as well as most of the lanthanide ion (i.e., presidium, erbium, lutetium, cerium, neodymium, europium, gadolinium, terbium, dysprosium, holmium, ytterbium, and thulium) sensors have been reported for the first time. It is noticable that the best reported sensors for HPO₄ ^2?, SO₄ ^2?, Cl^?, ClO₄ ^?, Br^?, and I₃ ^? have been designed and constructed by the Iranian researchers.     

Matrix isolated metal carbonyl anions

Cocondensation at 20K of sodium atoms with transition metal carbonyls (e.g. Cr(CO)₆) diluted in argon gives IR spectroscopic evidence for carbonyl anions (e.g. Cr(CO)₅⁻).     

The Hofmeister Anion Effect on Ionophore‐based Ion‐selective Nanospheres Containing Solvatochromic Dyes

Recently reported ionophore‐based ion‐selective nanospheres contained pH‐independent and positively charged solvatochromic dyes. Here, we evaluate systematically the effect of anions to the fluorescence response of the nanospheres. The anion interference was found significant for anion concentrations above 10 mM. The sensor responses in the presence of various anion background was studied. While target ion (K⁺) causes the fluorescence of the nanospheres to decrease, increasing anion background also leads to lower fluorescence intensity. Lipophilic anions such as ClO₄^?, SCN^?, and I^? exhibited much more interference than hydrophilic anions (e. g., NO₃^?, Cl^?, F^?, SO₄^2?). The trend of the anion interference followed the Hofmeister series. A theoretical model was also demonstrated based on anion adsorption on the surface of the nanospheres.     

A new approach for the study of gas-phase ion-ion reactions using electrospray ionization

A simple flow reactor which facilitates the study and application of ion-ion and ion-molecule reactions at near atmospheric pressures is reported. Reactant ions were generated by electrospray ionization and discharge ionization methods, although any ionization sources amenable to atmospheric pressure may be used. Ions of opposite charge are generated in spatially separate ion sources and are swept into capillary inlets where the flows are merged and where reaction(s) can occur. Among the reactions investigated were the partial neutralization of multiply protonated polypeptides and proteins such as melittin, bradykinin, cytochrome c, and myoglobin by reaction with discharge-generated anions, the partial neutralization of multiply charged anions of oligodeoxyadenylic acid (d(pA)₃) by reaction with discharge-generated cations, the partial neutralization of bovine A-chain insulin anions by reaction with myoglobin [M+nH]ⁿ⁺ ions, and the reaction of multiply protonated melittin with discharge-generated cations. The cation-anion reactions generally resulted in a shift to lower charge (higher mass-to-charge ratio) in the products’ charge state distributions and the transfer of solvent molecules to the macromolecule products. Multiply protonated melittin was detected in a less highly solvated state with the positive discharge in operation.     

Anion Receptors Containing ‐NH Binding Sites: Hydrogen‐Bond Formation or Neat Proton Transfer?

When the amide‐containing receptor 1 ⁺ is in a solution of dimethyl sulfoxide (DMSO) in the presence of basic anions (CH₃COO^?, F^?, H₂PO₄^?), it undergoes deprotonation of the ‐NH fragment to give the corresponding zwitterion, which can be isolated as a crystalline solid. In the presence of less basic anions (Cl^?, Br^?, NO₃^?), 1 ⁺ establishes true hydrogen‐bond interactions of decreasing intensity. The less acidic receptor 2 ⁺ undergoes neat proton transfer with only the more basic anions CH₃COO^? and F^?, and establishes hydrogen‐bond interactions with H₂PO₄^?. An empirical criterion for discerning neutralisation and hydrogen bonding, based on UV/Vis and ¹H NMR spectra, is proposed.     

Study of mechanism retention of nonvolatile alkylphosphonic acids on unmodified selected polymer-based ion exchanger columns

The retention of alkylphosphonic acids (MPA, EPA, PPA, and BPA) and inorganic anions (Cl⁻, NO₃⁻, and SO₄²⁻) were studied on two anion exchangers, e.g., Dionex IonPac AS4A-SC (250 ± 4 mm I.D.) and Satisfaction P 4000-SAX (50 ± 4.6 mm I.D.) under isocratic elution conditions with evaporative light scattering detector. The plots of retention factors, k, of organic anions vs. the reciprocal of eluent ion concentration show good linearity. The major retention mechanisms are interpreted as ion exchange and some others interactions. The C effect of organic modifier added to the aqueous buffered mobile phase is also investigated.     

Chaotropic‐Anion‐Induced Supramolecular Self‐Assembly of Ionic Polymeric Micelles

Traditional micelle self‐assembly is driven by the association of hydrophobic segments of amphiphilic molecules forming distinctive core–shell nanostructures in water. Here we report a surprising chaotropic‐anion‐induced micellization of cationic ammonium‐containing block copolymers. The resulting micelle nanoparticle consists of a large number of ion pairs (≈60 000) in each hydrophobic core. Unlike chaotropic anions (e.g. ClO₄^?), kosmotropic anions (e.g. SO₄^2?) were not able to induce micelle formation. A positive cooperativity was observed during micellization, for which only a three‐fold increase in ClO₄^? concentration was necessary for micelle formation, similar to our previously reported ultra‐pH‐responsive behavior. This unique ion‐pair‐containing micelle provides a useful model system to study the complex interplay of noncovalent interactions (e.g. electrostatic, van der Waals, and hydrophobic forces) during micelle self‐assembly.     

Determination of inorganic anions in human saliva by zwitterionic micellar capillary electrophoresis

Capillary electrophoresis (CE) using sulfobetaine-type zwitterionic micelles as the background electrolyte (BGE) has been used to determine inorganic anions in human saliva. The zwitterionic micelles resulted in unique migration behavior for the separation of inorganic anions. They also prevented adsorption of proteins on the inner wall of the capillary. These properties of the zwitterionic micelles enabled the direct determination of inorganic anions in human saliva. Three species of inorganic anions, NO₂ ^–, NO₃ ^–, and SCN^–, were found in real samples and the analysis was achieved within 3 min. Direct UV-absorption was used as the detection method and the detection limits for these anions were 2.0, 1.0, and 5.0 μmol L^–1, respectively (0.09, 0.06, and 0.30 μg mL^–1).     

Bildung siliciumorganischer Verbindungen. 80. Die Si-Metallierung von 1,3,5-Trisilacyclohexanen mit Übergangsmetallkomplexen

Formation of Organosilicon Compounds. 80. Si-Metalation of 1,3,5-Trisilacyclohexanes by Means of Trisition Metal Complexes Several Si-transition metal-substituted 1,3,5-trisilacyclohexanes are reported. l-Bromo-1,3,5-trisilacyclohexane reacts with the metal carbonyl anions W(CO)₅cp^?, Mo(CO)₃cp-, Cr(CO)₃cp^?, Mn(CO)₃^?, Fe(CO)₂cp^?, or Co(CO)_4minus;, resp., yielding monosubstituted derivatives as 6, e. g.(cp = π-cyclopentadienyl). 1,3-Dibromo-1,3,5-trisilacyclohexane forms disubstituted compounds aa 7, e. g., with 2 moles of the metal carbonyl anions Fe(CO)₂cp^?, Mn(CO)₅^? or Co(CO)₄^?. Starting from (H₂c? SiHBr)₃ compound 13 is accessible by reaction with KCo(CO)₄. In the soluted compounds the metal carbonyl groups occupy the equatorial positions in the chair form of the six membered ring. The reaction of 13 with Co₂(CO)₈ yields 17 , whereas 6 preferrably forms 18 . Starting from (H₂C? SiH₂)3 the reaction with Co₂(CO)₂ preferrably yields 19. The reported compounds are crystalline, air – and moisture – sensitive. The reported formulae are assured by analysis, IR, and NMR investigations.     

Gas-Phase Synthesis of Singly and Multiply Charged Polyoxovanadate Anions Employing Electrospray Ionization and Collision Induced Dissociation

Electrospray ionization mass spectrometry (ESI-MS) combined with in-source fragmentation and tandem mass spectrometry (MS/MS) experiments were used to generate a wide range of singly and multiply charged vanadium oxide cluster anions including V_xO_y ^n– and V_xO_yCl^n– ions (x = 1–14, y = 2–36, n = 1–3), protonated clusters, and ligand-bound polyoxovanadate anions. The cluster anions were produced by electrospraying a solution of tetradecavanadate, V₁₄O₃₆Cl(L)₅ (L = Et₄N⁺, tetraethylammonium), in acetonitrile. Under mild source conditions, ESI-MS generates a distribution of doubly and triply charged V_xO_yCl^n– and V_xO_yCl(L)^(n–1)– clusters predominantly containing 14 vanadium atoms as well as their protonated analogs. Accurate mass measurement using a high-resolution LTQ/Orbitrap mass spectrometer (m/Δm = 60,000 at m/z 410) enabled unambiguous assignment of the elemental composition of the majority of peaks in the ESI-MS spectrum. In addition, high-sensitivity mass spectrometry allowed the charge state of the cluster ions to be assigned based on the separation of the major from the much less abundant minor isotope of vanadium. In-source fragmentation resulted in facile formation of smaller V_xO_yCl^(1–2)– and V_xO_y ^(1–2)– anions. Collision-induced dissociation (CID) experiments enabled systematic study of the gas-phase fragmentation pathways of the cluster anions originating from solution and from in-source CID. Surprisingly simple fragmentation patterns were obtained for all singly and doubly charged V_xO_yCl and V_xO_y species generated through multiple MS/MS experiments. In contrast, cluster anions originating directly from solution produced comparatively complex CID spectra. These results are consistent with the formation of more stable structures of V_xO_yCl and V_xO_y anions through low-energy CID. Furthermore, our results demonstrate that solution-phase synthesis of one precursor cluster anion combined with gas-phase CID is an efficient approach for the top-down synthesis of a wide range of singly and multiply charged gas-phase metal oxide cluster anions for subsequent investigations of structure and reactivity using mass spectrometry and ion spectroscopy techniques.      

Salts of HCN‐Cyanide Aggregates: [CN(HCN)2]− and [CN(HCN)3]−

Although pure hydrogen cyanide can spontaneously polymerize or even explode, when initiated by small amounts of bases (e.g. CN^?), the reaction of liquid HCN with [WCC]CN (WCC=weakly coordinating cation=Ph₄P, Ph₃PNPPh₃=PNP) was investigated. Depending on the cation, it was possible to extract salts containing the formal dihydrogen tricyanide [CN(HCN)₂]^? and trihydrogen tetracyanide ions [CN(HCN)₃]^? from liquid HCN when a fast crystallization was carried out at low temperatures. X‐ray structure elucidation revealed hydrogen‐bridged linear [CN(HCN)₂]^? and Y‐shaped [CN(HCN)₃]^? molecular ions in the crystal. Both anions can be considered members of highly labile cyanide‐HCN solvates of the type [CN(HCN)_n]^? (n=1, 2, 3 …) as well as formal polypseudohalide ions.     

Composition,structure, and ir spectra of acid trialkylmethylammonium acetates in CCl4+HAc solutions

The composition and structure of neutral and acid trialkyl(C₈-C₁₀)methylammonium acetates in CCl₄+HAc solutions formed by the reaction R₃CH₃N⁺Ac⁻+nHAc⇔R₃CH₃N⁺(Ac·nAc)⁻ are investigated by IR spectroscopy. As the molar ratio HAc/R₃CH₃N⁺Ac⁻ increases in solutions, complex anions Ac·nAc⁻ (I) with n=1, 2, 3, 4 are formed in sequence. The curves of formation of anions with n=0, 1, 2 are plotted. One terminal COO group of anions I is bonded to (“blocked” by) the R₃CH₃N⁺ cation, and another group sequentially adds H-bonded HAc molecules as the concentration of HAc in solutions increases. The sequence of IR spectral changes in the series of anions I with n=0, 1, 2, 3, 4 is discussed. Institute of Catalysis, Siberian Branch, Russian Academy of Sciences. Novosibirsk State University. Translated fromZhurnal Strukturnoi Khimii, Vol. 37, No. 2, pp. 310–318, March–April, 1996. Translated by L. Smolina     

Neue wasserlösliche Osmiumkomplexe des 5,10,15,20‐Tetrakis(4‐sulfonatophenyl)‐porphyrin‐Anions

Metal Complexes with Tetrapyrrole Ligands. LXXVI. New Water‐soluble Osmium Complexes of 5,10,15,20‐Tetrakis(4‐sulfonatophenyl)porphyrin‐Anion The new symmetrical osmium(II) porphyrinates [Os(tpps₄)L₂]^4– ( 1 b – g ) are formed from [OsO₂(tpps₄)]^4– ( 1 a ) by reduction in presence of the ligands L. 1 e – g react with 1‐methylimidazole to yield the unsymmetrical complexes [Os(tpps₄)LL′]^4– ( 1 h – j ). Except for 1 g – h the osmium(II) porphyrinates are not inert in presence of air and are oxidized to the osmium(III) porphyrinates [Os(tpps₄)L₂]^3– ( 2 b – f ) and [Os(tpps₄)LL′]^3– ( 2 i – j ). These anions are deposited as sodium salts.     

Complexes of nickel(II) and palladium(II) with thiobenzamide

Summary The electronic and vibrational spectra of Ni^II and Pd^II complexes with thiobenzamide, L, are discussed. L acts as a sulphur donor ligand. The Pd^II compounds and (NiL₄)(ClO₄)₂ are square planar. PdL₂Cl₂ has acis-structure, while PdL₂X₂ (X=Br or I) istrans; NiL₄Cl₂ istrans-octahedral. The i.r. bands due to(M.S) and(MX) have been assigned. The influence of the anions on the properties of the complexes, both in solution and in the solid state, is discussed.     

Mass-spectrometric investigation of the anions and cations in a hydrocarbon flame doped with sulphur/fluorine additives

A fuel-lean, premixed, CH₄O₂ flame at atmospheric pressure was doped with 0.2 mol% of SF₆ and 0.1 mol% of triflic anhydride (CF₃SO₂)₂O. Primarily the anions, but also the cations, occurring in the flame reaction zone and in the burnt-gas region downstream were observed by sampling the flame through a nozzle into a mass spectrometer. The main objective was to ascertain the ability of these sulphur/fluorine (S/F) additives and their combustion products to scavenge free electrons by forming negative ions in the flame gas. With either additive present, both total anions and cations increased in the reaction zone by a factor of between three and four. In the burnt gas, the total cations were essentially unchanged but the total anions showed a three-fold increase. With SF₆ additive only, major S/F cations were observed in the reaction zone (e.g.; SF⁺₃, SF₃O⁺, SF⁺₃, etc.) although H₃O⁺ with both additives was completely dominant downstream. Both additives produced major S/F anion signals in the flame reaction zone. Some of these were related to the individual additive structure (e.g. SF⁻₅ with SF₆; CF₃SO⁻₃ with (CF₃SO₂)₂O). Others were essentially unrelated but were observed with both additives (e.g. FSO⁻₃, HSO⁻₄, etc.) and persisted throughout the burnt gas. Some important features of the ion chemistry are discussed.     

Adsorption of pertechnetate ion on active carbon from acids and their salt solutions

The adsorbability of pertechnetate ion (TcO ₄ ^– ) reached 96% for an active carbon at the 0.1 g/50 ml concentration level, increasing with diminution of acid and its salt concentrations, and depending on the type of anions present. With constant anion concentration, TcO ₄ ^– adsorbability rose with decreasing pH in the acidic region, followed in the region around neutrality by a plateau, and in the basic region by an appreciable decline of TcO ₄ ^– adsorbability. In the acidic region, part of once-adsorbed TcO ₄ ^– appeared to be displaced by other anions. Reversibility was noted between the adsorption and desorption of TcO ₄ ^– .     

Low temperature preparation and uses of potent oxidizers

Because electronegativity of an oxidation state is low in an anion, salts of the high oxidation-state species [AgF₄]⁻ and [NiF₆]²⁻ can be easily made, at 0 °C, in liquid anhydrous HF (aHF) made basic with alkali fluorides. The containers are transparent fluorocarbon, and the F₂ is photo-dissociated. The [NiF₆]²⁻ salts, and the metastable binary fluorides NiF₄ and NiF₃, derived from them, are efficient fluorinating agents for the conversion of hydrido compounds to their fully fluorinated relatives. With F₂ in aHF made acidic with fluoride-ion acceptors (e.g. MF₅, M = As, Sb, Bi) attained oxidation-states are often lower (e.g. Ag^II, Au^II) because of the higher electronegativity in cations. Cationic Ag^III and Ni^IV species (derived from the anions) are sufficiently long-lived, and potent, to generate the most powerfully oxidizing hexafluorides of the second and third transition series (i.e. [MF₆], M = Pt, Ru, Rh). This synthesis is especially valuable for RhF₆, and has provided for the reinvestigation of the interaction of it with O₂. It is proposed that the unexpectedly large unit cell of O₂RhF₆ is a result of the presence of neutral O₂ and neutral RhF₆ as well as O₂⁺ and RhF₆⁻ in the lattice.