High-throughput separation of DNA and proteins by three-dimensional geometry gel electrophoresis: feasibility studies

We report a novel separation method that is applicable to both DNA and protein samples, based on electrophoresis in a three-dimensional (3-D) geometry. In contrast to conventional electrophoresis, samples are applied in a two-dimensional, planar array to one of the surfaces of a 3-D geometry separation medium. Loading onto a plane results in a very high sample capacity. Sample migration and separation occur along the third spatial dimension, which is perpendicular to the loading plane. The key problem of electrophoresis in a 3-D geometry separation setup is that temperature gradients are caused by Joule's heat, affecting the electrical conductivity and viscosity of the separation medium. A means of achieving straight sample migration under these circumstances is to force heat flow through the separation medium parallel to the axis of sample migration. This can be done by dissipating the heat via the electrode sides of the gel and blocking any other heat transfer. The separation of DNA and proteins by this method has been tested using agarose gel electrophoresis, polyacrylamide gel electrophoresis, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Data were acquired off-line by conventional staining methods as well as on-line by detection of laser-induced fluorescence. We describe how to excise samples from the separation medium for preparative purposes. Possible unique applications of this 3-D geometry electrophoresis separation method are also discussed.     

Sodium dodecyl sulfate free gel electrophoresis/electroelution sorting for peptide fractionation

Shotgun proteomics based on peptide fractionation by using liquid chromatography has become the common procedure for proteomic studies, although in the very beginning of the field, protein separation by using electrophoresis was the main tool. Nonetheless, during the last two decades, the electrophoretic techniques for peptide mixtures fractionation have evolved as a result of relevant technological improvements. We also proposed the combination of sodium dodecyl sulfate polyacrylamide gel electrophoresis for protein fractionation and sodium dodecyl sulfate free polyacrylamide gel electrophoresis for peptide separation as a novel procedure for proteomic studies. Here, we present an optimized device for sodium dodecyl sulfate free polyacrylamide gel electrophoresis improving peptide recoveries respect to the established electrophoretic technique off gel electrophoresis meanwhile conserving the excellent resolution described for the former technique in slab gel based systems. The device simultaneously allows the separation and the collection of fractionated peptides in solution.     

A multichannel gel electrophoresis and continuous fraction collection apparatus for high‐throughput protein separation and characterization

To facilitate a direct interface between protein separation by PAGE and protein identification by mass spectrometry, we developed a multichannel system that continuously collects fractions as protein bands migrate off the bottom of gel electrophoresis columns. The device was constructed using several short linear gel columns, each of a different percent acrylamide, to achieve a separation power similar to that of a long gradient gel. A “Counter Free‐Flow” elution technique then allows continuous and simultaneous fraction collection from multiple channels at low cost. We demonstrate that rapid, high‐resolution separation of a complex protein mixture can be achieved on this system using SDS‐PAGE. In a 2.5 h electrophoresis run, for example, each sample was separated and eluted into 48–96 fractions over a mass range of ～10–150 kDa; sample recovery rates were 50% or higher; each channel was loaded with up to 0.3 mg of protein in 0.4 mL; and a purified band was eluted in two to three fractions (200 μL/fraction). Similar results were obtained when running native gel electrophoresis, but protein aggregation limited the loading capacity to about 50 μg per channel and reduced resolution.     

3D打印便携式凝胶电泳装置用于蛋白质的快速检测

随着现场分析对于快速、便携和经济型检测的需求,分析仪器的便携化和微型化备受关注。3D打印技术的不断发展,将会极大推动小型化、便携式实验设备的开发和研制。分析仪器的微型化有助于促进资源不足地区在医疗现场、食品安全和环境污染等方面的现场监测。目前,用于蛋白质分离的凝胶电泳装置多为实验室用小型化分析仪器,可用于现场快速分离蛋白质的小型化仪器尚未见报道。该研究设计加工了一款便携式凝胶电泳装置,用于蛋白质的快速分离检测。首先,通过3D打印加工的凝胶电泳装置可在实验室内方便、快捷、低成本的复制。其次,通过对预染蛋白质相对分子质量标准的分离测试,对该系统结构进行优化。优化后该凝胶电泳装置电泳槽的尺寸仅为15 mm×20 mm×17 mm,采用3D打印技术可在5 h内加工完成,耗费打印材料10 mL。正负极所用电泳缓冲液共需4 mL,所使用的25 V锂电池可实现100 h左右的工作时间。装置优化后可实现蛋白质的快速高效分离。随后,在5种常用蛋白质相对分子质量标准的分离中,该装置与商业化平板凝胶电泳分离效果相当,同时具备更快的分离速度。该研究在便携式凝胶电泳装置的开发及其在蛋白质快速分离方面取得了初步成果,但在分离完成后立即对蛋白质进行定量分析以及更多实际样品的应用方面还需要进一步研究。     

High-performance ultrathin layer agarose gel electrophoresis

Large scale, high-resolution DNA fragment analysis, such as genotyping, mapping and genetic profiling requires an affordable, fully automated high-throughput gel electrophoresis based separation device that enables rapid, high-performance analysis in a wide molecular weight range. In this article a novel approach is described that greatly enhances the productivity of DNA fragment analysis by automating the current manual procedure and also reducing the separation time and human intervention from sample loading to data analysis. The ultrathin layer, multilane, high-performance agarose gel electrophoresis system employs integrated scanning laser induced fluorescence-avalanche photodiode detection and combines the advantages of conventional slab and capillary gel electrophoresis. The separation platform is fabricated in a way that the sieving matrix can be easily replaced in the separation cassette for each run. Visualization of the DNA fragments is accomplished by ‘in migratio' complexation during the electrophoresis process with ultra-sensitive fluorescent agents, also enabling real-time imaging and data analysis.     

电泳技术在纳米颗粒分离中的应用

合成纳米颗粒常在尺寸和形状方面具有广泛分布.在很多实验中,需要利用一定大小及形状的纳米颗粒的独特物理化学性质,因此,简便快速的纳米颗粒分离技术越来越受到诸多科学领域的重视.电泳技术以其高分辨率,被广泛用于多种生物大分子如核酸、蛋白质等的分离纯化.纳米颗粒在尺寸上与生物体中的蛋白复合物、细胞器和微生物等十分接近,考虑到带电纳米颗粒与生物分子在电场中的运动行为的相似性,运用电泳技术进行纳米颗粒的鉴定、分离和纯化是一种新的思路,并取得了良好的实验结果.本文主要介绍了琼脂糖凝胶电泳、毛细管电泳以及其他一些电泳技术在纳米颗粒分离中的研究进展.     

High-performance capillary electrophoresis using open tubes and gels

Summary This paper overviews several aspects of high performance capillary electrophoresis (HPCE), a promising new method of analytical and micropreparative separation of biochemically important samples. The basic migration equations of electrophoresis are first presented and the benefit of high fields for rapid analysis and high performance emphasized. Since power is generated with high voltages, Joule heating results and this heat must be dissipated. The use of capillary columns is shown to be important in efficient heat removal and in minimizing the temperature differences within the column. The various factors influencing band broadening are next described, and it is shown how plate counts close to 10⁶ can be achieved. Various results from our laboratory on open tube and gel columns are then presented to illustrate the potential of this method. Chiral resolution of dansylated amino acids using a chiral metal chelate micelle in open tube HPCE is shown. With the gel columns, the baseline separation of a 2-chain variant from methionine growth hormone (met-hGH) under non-denaturing conditions at fields close to 1000 V/cm is presented. Finally, the micropreparative purification of a 20-mer oligonucleotide using the gel column is described.     

Discontinuous native protein gel electrophoresis

Analysis of the oligomeric state of a native protein usually requires analytical ultracentrifugation or repeated gel filtration to calculate the protein's size. We have developed a discontinuous native protein gel electrophoresis system that allows the separation of even basic proteins according to their size, oligomeric state, and shape. This gel system combines the addition of negative charges to the proteins by Serva Blue G with a discontinuous buffer system and gradient gels. As in SDS-PAGE, chloride constitutes the high mobility anion in the gel and anode buffer. However, for sample focusing this system employs histidine instead of glycine as the slow dipolar ion following from the cathode buffer to improve migration of basic proteins. In addition, proteins run into gel pores corresponding to their size and shape in the gradient gel. Using this gel system, we show that the polypyrimidine tract-binding protein (PTB) is a monomer.     

Nonradioactive telomerase activity assay by microchip electrophoresis: privileges to the classical gel electrophoresis assay

The present study accents on the privileges of microchip-based electrophoresis to the conventional gel electrophoresis in separation of telomerase repeat amplification protocol/polymerase chain reaction (PCR) ladder products obtained in telomerase-catalyzed reaction in cancer cells. We try to clarify the interpretation of the results obtained by both electrophoretic procedures and to avoid misinterpretation as a result of PCR-dependent artefacts.     

Boronate affinity saccharide electrophoresis: a novel carbohydrate analysis tool

The incorporation of specialised carbohydrate affinity ligand methacrylamido phenylboronic acid in polyacrylamide gels for fluorophore-assisted carbohydrate electrophoresis greatly improved the effective separation of saccharides that show similar mobilities in standard electrophoresis. Polyacrylamide gel electrophoresis using methacrylamido phenylboronic acid in low loading (typically 0.5-1% dry weight) was unequivocally shown to alter retention of labelled saccharides depending on their boronate affinity. While conventional fluorophore-assisted carbohydrate electrophoresis of 2-aminoacridone labelled glucose oligomers showed an inverted parabolic migration, an undesired trait of small oligosaccharides labelled with this neutral fluorophore, boron affinity saccharide electrophoresis separation of these carbohydrates completely restored their predicted running order, based on their charge/mass ratio, and resulted in improved separation of the analyte saccharides. These results exemplify boron affinity saccharide electrophoresis as an important new technique for analysing carbohydrates and sugar-containing molecules.     

Two-dimensional electrophoresis of membrane proteins

One third of all genes of various organisms encode membrane proteins, emphasizing their crucial cellular role. However, due to their high hydrophobicity, membrane proteins demonstrate low solubility and a high tendency for aggregation. Indeed, conventional two-dimensional gel electrophoresis (2-DE), a powerful electrophoretic method for the separation of complex protein samples that applies isoelectric focusing (IEF) in the first dimension and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) in the second dimension, has a strong bias against membrane proteins. This review describes two-dimensional electrophoretic techniques that can be used to separate membrane proteins. Alternative methods for performing conventional 2-DE are highlighted; these involve replacing the IEF with electrophoresis using cationic detergents, namely 16-benzyldimethyl-n-hexadecylammonium chloride (16-BAC) and cetyl trimethyl ammonium bromide (CTAB), or the anionic detergent SDS. Finally, the separation of native membrane protein complexes through the application of blue and clear native gel electrophoresis (BN/CN-PAGE) is reviewed, as well as the free-flow electrophoresis (FFE) of membranes.     

Vertical agarose gel electrophoresis and electroblotting of high-molecular-weight proteins

The electrophoretic separation of high-molecular-weight proteins (> 500 kDa) using polyacrylamide is difficult because gels with a large enough pore size for adequate protein mobility are mechanically unstable. A 1% vertical sodium dodecyl sulfate (SDS)-agarose gel electrophoresis (VAGE) system has been developed that allows titin (a protein with the largest known SDS subunit size of 3000-4000 kDa) to migrate over 10 cm in a approximately 13 cm resolving gel. Such migration gives clear and reproducible separation of titin isoforms. Proteins ranging in size from myosin heavy chain ( approximately 220 kDa) up to titin can be resolved on this gel system. Electroblotting of these very large proteins was nearly 100% efficient. This VAGE system has revealed two titin size variants in rabbit psoas muscle, two N2BA bands in rabbit cardiac muscle, and species differences between titins from rat and rabbit muscle. Agarose electrophoresis should be the method of choice for separation and blotting of proteins with very large subunit sizes.     

Star-shaped polymers for DNA sequencing by capillary electrophoresis

The separation and sequencing of DNA are the main objectives of the Human Genome Project, and this project has also been very useful for gene analysis and disease diagnosis. Capillary electrophoresis (CE) is one of the most common techniques for the separation and analysis of DNA. DNA separations are usually achieved using capillary gel electrophoresis (CGE) mode, in which polymer gel is packed into the capillary. Compared with a traditional CGE matrix, a hydrophilic polymer matrix, which can be adsorb by the capillary wall has numerous advantages, including stability, reproducibility and ease of automation. Various water-soluble additives, such as linear poly(acrylamide) (PAA) and poly(N,N-dimethylacrylamide) (PDMA), have been employed as media. In this study, different star-shaped PDMA polymers were designed and synthesized to achieve lower polymer solution viscosity. DNA separations with these polymers avoid the disadvantages of high viscosity and long separation time while maintaining high resolution (10 bp between 271 bp and 281 bp). The influences of the polymer concentration and structure on DNA separation were also determined in this study; higher polymer concentration yielded better separation performance, and star-like polymers were superior to linear polymers. This work indicates that modification of the polymer structure is a potential strategy for optimizing DNA separation.     

Band broadening of DNA fragments isolated by polyacrylamide gel electrophoresis in capillary electrophoresis

Polyacrylamide gel electrophoresis (PAGE) is used frequently for isolation and purification of DNA fragments. In the present study, DNA fragments extracted from polyacrylamide gels showed significant band broadening in capillary electrophoresis (CE). A pHY300PLK (a shuttle vector functioning in Escherichia coli and Bacillus subtilis) marker, which contained nine fragments ranging from 80 to 4870 bp, was separated by PAGE, and each fragment was isolated by phenol/chloroform extraction and ethanol precipitation. After extraction from the polyacrylamide gel, the peaks of the isolated DNA fragments exhibited band broadening in CE, where a linear poly(ethylene oxide) was used as a sieving matrix. The theoretical plate numbers of the DNA fragments contained in the pHY300PLK marker were >10⁶ for all the fragments before extraction. However, the DNA fragments extracted from the polyacrylamide gel showed decreased theoretical plate numbers (5–20 times smaller). The degradation of the theoretical plate number was significant for middle sizes of the DNA fragments ranging from 489 to 1360 bp, whereas the largest and smallest fragments (80 and 4870 bp) had no obvious influence. The band broadening was attributed to contamination of the DNA fragments by polyacrylamide fibers during the separation and extraction process.     

Two-dimensional Blue Native/sodium dodecyl sulfate gel electrophoresis for analysis of multimeric proteins in platelets

Two-dimensional (2-D) Blue Native/SDS gel electrophoresis combines a first-dimensional separation of monomeric and multimeric proteins in their native state with a second denaturing dimension. These high-resolution 2-D gels aim at identifying multiprotein complexes with respect to their subunit composition. We applied this method for the first time to analyze two human platelet subproteomes: the cytosolic and the microsomal membrane protein fraction. Solubilization of platelet membrane proteins was achieved with the nondenaturing detergent n-dodecyl-beta-D-maltoside. To validate native solubilization conditions, we demonstrated the correct assembly of the Na,K-ATPase, a functional multimeric transmembrane protein, when expressed in Xenopus oocytes. We identified 63 platelet proteins after in-gel tryptic digestion of 58 selected protein spots and liquid chromatography-coupled tandem mass spectrometry. Nine proteins were detected for the first time in platelets by a proteomic approach. We also show that this technology efficiently resolves several known membrane and cytosolic multiprotein complexes. Blue Native/SDS gel electrophoresis is thus a valuable procedure to analyze specific platelet subproteomes, like the membrane(-bound) protein fraction, by mass spectrometry and immunoblotting and could be relevant for the study of protein-protein interactions generated following platelet activation.     

Methodological Challenges of Protein Analysis in Blood Serum and Cerebrospinal Fluid by Capillary Electrophoresis

Summary High-performance capillary electrophoresis (HPCE or CE) is an ultrasensitive analytical technique with high resolving power and a wide area of applications including peptide/protein analysis. Its applicability is greatly enhanced by the short separation times, the ease of method development and the minimum sample and organic solvent requirements. Various HPCE modes have been developed for peptide/protein analysis, including capillary zone electrophoresis, micellar elektrokinetic capillary chromatography, capillary isoelectric focusing, isotachophoresis, capillary gel electrophoresis and microemulsion elektrokinetic chromatography. HPCE can easily be applied to quality control of manufacturing processes or to clinical routine for diagnostic purposes due to its potential to provide information on the identity, the purity of the samples and the quantities of the constituents. Furthermore, interactions of a peptide or a protein with other molecules can be studied by HPCE. The separation principles of the various operation modes applied to peptide/protein analysis are presented in this article. Furthermore, in order to exemplify the application of the separation principles in the area of serum protein analysis, which is of importance in clinical practice, the capillary electrophoretic methods developed for analysis of serum and cerebrospinal fluid proteins are also reviewed.Presented at: International Symposium on Separation and Characterization of Natural and Synthetic Macromolecules, Amsterdam, The Netherlands, February 5–7, 2003     

Electrophoretic methods for the analysis of nanoparticles

With the development of nanotechnology, there is a need for methodologies to determine and characterize nanomaterials. Electrophoresis has emerged as a useful tool, which has been employed in various formats (e.g., capillary-zone electrophoresis, gel electrophoresis or isotachophoresis) for the size- or shape-based separation of different types of nanoparticle (NP) (e.g., metallic, semi-metallic or carbon). This article reviews the main progress in electrophoresis techniques in order to achieve separation of NPs.     

Rapid and efficient isotachophoretic preconcentration in free solution coupled with gel electrophoresis separation on a microchip using a negative pressure sampling technique

We present a novel isotachophoresis–gel electrophoresis (ITP–GE) microchip system designed for rapid and efficient isotachophoretic preconcentration coupled with gel electrophoresis separation by using a negative pressure sampling technique. The overall ITP–GE procedure involves only three steps: sample loading, ITP preconcentration and GE separation and was controlled by a simple and compact negative pressure sampling device, which is composed of a vacuum vessel, a three-way electromagnetic valve and a single high voltage power supply. During the sample loading stage, a negative pressure was applied via a three-way electromagnetic valve in headspace of the two sealed sample waste reservoirs (SWs). A sandwiched sample zone between a leading and a terminating electrolyte zone was formed in the channel intersection in less than 1 s. Once the three-way electromagnetic valve was switched to connect SWs to ambient atmosphere to release vacuum in SWs, ITP preconcentration in free solution and GE separation in the 4% hydroxyethylcellulose (HEC) sieving material were consequently activated under the electric potentials applied. The performance of present approach was evaluated by using DNA fragments as model analytes. Compared to conventional cross microchip GE using electrokinetic pinched injection, an average signal enhancement of 185-fold was obtained with satisfactory resolution. The results demonstrated the ITP–GE approach possessing an exciting potential of high sensitivity and short sampling time with significant simplification in operation and instrumentation.     

Simple Hexagonal-Pulsed-Field Gel Electrophoresis System

Abstract

A diode array was used to isolate point electrodes in a hexagonal-pulsed-field gel electrophoresis system. The electric circuit around the electrophoresis chamber was simplified by modification. The reasonably straightmigration and good resolution of large DNA molecules were observed by the system.

Several types of pulsed-field gel electrophoresis system have been developed to get straight DNA migration^1-5. We have adopted diodes to isolate     

Improved resolution power of electrophoretic fractionation of DNA using a voltage gradient "up and down" application

The improved resolution power of electrophoretic fractionation of DNA in a wide range of molecular masses is demonstrated using an "up and down" application of voltage gradient gel electrophoresis (VGGE). This application also allows separation of different DNA fragments which are poorly fractionated in conventional electrophoresis.