Glass transition and film formation of VeoVa/vinyl acetate latices; role of water and co-solvents

The physical forces causing deformation of latex particles during the film formation process have been witley studied. However, the forces resisting particle deformation are still poorly characterized. It is clear that the extent of particle deformation is dependent on the viscoelastic nature of the polymer. In an emulsion, the latex particles will normally contain water, surfactants and “free” monomers which lead to plasticization of the polymer. Although this effect has been recognized, so far it has been studied only on films that had been dried and then partially or completely swollen by water. In this work, plasticization of the emulsion polymers by water and co-solvent has been quantified via differential scanning calorimetry investigation directly on the aqueous latex dispersions. More specifically, the plasticizing effect of water on VeoVa/vinyl acetate copolymer latices and its influence on minimum film-forming temperature (MFFT) has been studied. A linear correlation has been found between T_g and MFFT for the wet latices. This new direct method should help to improve our understanding of the forces resisting latex film formation. Additionally, the homogeneous distribution of the hydrophobic and hydrophilic monomers (VeoVa and vinyl acetate respectively) in the latex particles was verified via a ¹³C-NMR (nuclear magnetic resonance) study performed directly on the latices. This study confirmed that no significant core/shell type of morphology had influenced latex film formation.     

Aqueous Catalytic Polymerization of Olefins

Catalytic conversions in aqueous environments by transition metal complexes have become a well‐established field over the past two decades. However, the vast majority of investigations have focussed on small‐molecule synthesis. This may appear somewhat surprising as water is a particularly attractive reaction medium, especially for polymerization reactions. For example, aqueous emulsion and suspension polymerization is carried out today on a large scale by noncatalytic free‐radical routes. Polymer latices can be obtained as a product, that is, stable aqueous dispersions of polymer particles in the size range of 50 to 1000 nm. Such latices possess a unique property profile. Amongst other advantages, the use of water as a dispersing medium is particularly environmentally friendly. In comparison to these free‐radical reactions, aqueous catalytic polymerizations of olefinic monomers have received less attention. However, considerable advances and an increased awareness of this field have emerged during the past few years. A variety of high molecular weight polymers ranging from amorphous or semicrystalline polyolefins to polar‐substituted hydrophilic materials have now been prepared by catalytic polymerization of olefinic monomers in water. Polymer latices based on a number of readily available monomers are accessible and catalytic activities as high as 10⁵ turnovers per hour have already been reported. As another example, materials prepared by aqueous catalytic polymerization have been investigated as protein inhibitors. A versatile field spanning colloids, polymer, and coordination chemistry has emerged.     

Monolayers and Multilayers of Amphiphilic Phospholipid Analogous Poly(Acrylamide)s

Abstract

A series of amphiphilic phospholipid analogous acrylamide monomers and homopolymers containing long alkyl chains as the hydrophobic groups and phosphatidylcholine analogues as the hydrophilic groups were used to study the properties of monolayers and multilayers. The P-A isotherms of the monolayers for these monomers and polymers were measured at different temperatures. The temperature and length dependence of alkyl chains, and the difference between monomers and polymers were investigated, respectively. On the other hand, the LB multilayers of all monomers and polymers were prepared. The contact angles of LB films obtained with pure water were also measured.     

Polypeptide friction and adhesion on hydrophobic and hydrophilic surfaces: a molecular dynamics case study

Using all-atomistic MD simulations including explicit water, the mobility and adhesion of a mildly hydrophobic single polypeptide chain adsorbed on hydrophobic and hydrophilic diamond surfaces is investigated by application of lateral and vertical pulling forces. Forced motion on the hydrophilic surface exhibits stick-slip due to breaking and reformation of hydrogen bonds; in contrast, on the hydrophobic surface, the motion is smooth. By carefully tuning the driving force magnitude, the linear-response regime is reached on a hydrophobic surface and equilibrium values for mobility and adhesive strength are obtained. On the hydrophilic surface, on the other hand, slow hydrogen-bond kinetics prevents equilibration and only upper bounds for adhesion force and mobility can be estimated. Whereas the desorption force is rather comparable on the two surfaces and differs at most by a factor of 2, the mobility on the hydrophilic surface is at least 30-fold reduced compared to the hydrophobic one. A simple model based on a single particle diffusing in a corrugated potential landscape suggests that cooperativity is rather limited and that the small mobility on a hydrophilic surface can be rationalized in terms of incoherently moving monomers. The experimentally well-known peptide mobility in bulk water is quantitatively reproduced in our simulations, which serves as a sensitive test on our methodology employed.     

聚丙烯表面光接枝及染色

用UV光照法将两种亲水性单体(甲基丙烯酸和丙烯酰胺)分别接枝到非亲水性的聚丙烯板表面上。以二苯酮为光敏剂,丙酮为溶剂,在不断通入氮气的条件下,采用汽-固相接枝法,可以一次完成双面接枝。电子能谱(ESCA)的结果证实了光接枝的成功。水接触角测试结果表明,接枝后的聚丙烯表面具有良好的亲水性。利用水溶性的染料(结晶紫和罗丹明B)对接枝后的聚丙烯板进行了染色,并测定了吸收光谱和荧光光谱。     

Hydrophobic polyurethane polyHIPEs templated from mannitol within nonaqueous high internal phase emulsions for oil spill recovery

Although amphiphilicity is an integral component for the applications of polyHIPEs (PHs), it is challenging to produce hydrophobic PHs from hydrophilic monomers. Herein, hydrophobic polyurethane (PU) PHs have been fabricated from a water‐soluble mannitol within block copolymer surfactant‐stabilized, nonaqueous high internal phase emulsions (HIPEs). These highly porous, interconnected, macroporous PU PHs were hydrophobic with water contact angles between 102° and 140°, demonstrating that water‐soluble monomers could be used for fabrication of hydrophobic PHs. The block copolymer surfactant acted not only as the HIPE stabilizer, but also as a monomer, enhancing hydrophobicity and overcoming some drawbacks imposed by conventional inert stabilizers. The solvents used for PU PH synthesis and purification were easily recovered and reused, showing that nonaqueous HIPE templating for PU PH preparation is an efficient and facile route. The PU PHs were investigated for oil spill reclamation and they were demonstrated to be an ideal candidate for such an application. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1315–1321     

One‐stage synthesis of narrowly dispersed polymeric core‐shell microspheres

A method of one‐stage soap‐free emulsion polymerization to synthesize narrowly dispersed core‐shell microspheres is proposed. Following this method, core‐shell microspheres of poly(styrene‐co‐4‐vinylpyridine), poly(styrene‐co‐methyl acrylic acid), and poly[styrene‐co‐2‐(acetoacetoxy)ethyl methacrylate‐co‐methyl acrylic acid] are synthesized by one‐stage soap‐free emulsion polymerization of a mixture of one or two hydrophobic monomers and a suitable hydrophilic monomer in water. The effect of the molar ratio of the hydrophobic monomer to the hydrophilic one on the size, the core thickness, and the shell thickness of the core‐shell microspheres is discussed. The molar ratio of the hydrophobic and hydrophilic monomers and the hydrophilicity of the resultant oligomers of the hydrophilic monomer are optimized to synthesize narrowly dispersed core‐shell microspheres. A possible mechanism of one‐stage soap‐free emulsion polymerization to synthesize core‐shell microspheres is suggested and coagglutination of the oligomers of the hydrophilic monomers on the hydrophobic core is considered to be the key to form core‐shell microspheres. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1192–1202, 2008     

The World of Synthetic Polymers.An Industrial Perspective

Synthetic polymers have become the building block in almost every aspects of our daily life. Billions of pounds of polymers are produced each year and the demand is continuously growing both in terms of volume and advanced performance. The general property of a class of polymers is often bounded by the synthetic process that produces the polymer. For example,polyolefins, are non-polar polymers due to the poor tolerance of transition metal catalysts toward polar monomers. Conversely, latices are polar polymers, since the emulsion polymerization process limits the use of non-polar monomers which have low solubility in water. It is highly desirable to be able to design polymer systems with optimum polarity balance to meet the application demand while staying within the industrial manufacturing constraints.An overview of industrial polymerization methods will be followed by a presentation on the recent development of a new emulsion polymerization technology. The technology involves the use of Cyclodextrin, acting as "Phase Transport Catalyst", facilitating the diffusion of very hydrophobic and water insoluble monomers through the aqueous medium. A new class of latex polymers and their attributes will be discussed.     

Study on slow release anti-cancer drugs prepared by radiation induced polymerization

This paper reports the research results which the anticancer drugs Ara-C with controlled slow release were made by radiation induced polymerization of monomers such as methacrylates at room temperature. Our studies showed that not only hydrophilic synthetic polymers but also hydrophobic polymers such as hydrophobic methacrylates (including MMA, EMA, and BMA) could be used to the immobilization. In vitro the rate of drugs release was controlled by the many factors such as the content of drugs, the monomer material, the crosslinking agent, the irradiation dose and the water content, etc.     

Novel nonionic polymerisable surfactants based on sulfoxides. 1. Monomer synthesis and general surfactant behaviour

The synthesis, surface activity, and micellisation of a series of new nonionic polymerisable surfactants, often referred to as surfmers, are described. These monomers bear terminal vinyl groups or acrylic esters, and the nonionic sulfoxide moiety. Compared to many other nonionic hydrophilic fragments, the sulfoxide group behaves as a strongly hydrophilic fragment of small volume, that can balance up to an acryloyloxyundecyl hydrophobic chain. The incorporation of the polar acrylate moiety at the end of the hydrophobic chain seems to confer surfactant properties similar to the ones of bola amphiphiles to the monomers. Received: 22 March 2001 Accepted: 11 August 2001     

耐电解质高吸水性树脂

在简述高吸水性树脂吸水机理的基础上,综述了改善高吸水性树脂耐电解质性能的四种途径,结合聚合方法重点讨论了提高亲水性、引入长链疏不性单体以及合成两性聚合物三种改性途径。     

Poly(ethylene glycol)‐based amphiphilic model conetworks: Synthesis by RAFT polymerization and characterization

Poly(ethylene glycol) (PEG)‐containing quasi‐model amphiphilic polymer conetworks (APCNs) were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization using α,ω‐bis(2‐cyanoprop‐2‐yl dithiobenzoate)‐PEG as a bifunctional RAFT macrochain transfer agent (macro‐CTA) and stepwise additions of a hydrophobic monomer and a crosslinker (crosslinker: macro‐CTA = 10:1, reaction time 24 h). Three different types of monomers, methyl methacrylate (MMA), n‐butyl acrylate and styrene, were employed as the hydrophobic monomers, whereas ethylene glycol dimethacrylate, ethylene glycol diacrylate and 1,4‐divinylbenzene served as the respective crosslinkers. PEG homopolymer hydrophilic quasi‐model networks were also prepared by RAFT‐polymerizing the three crosslinkers directly onto the two active ends of the PEG‐based macro‐CTA. From the three ABA triblock copolymers prepared, the MMA‐containing one was obtained at the highest polymerization yields. The crosslinking yields of the three ABA triblock copolymers with the corresponding crosslinkers were higher than those of the PEG‐based macro‐CTA with the same crosslinkers. The degrees of swelling (DSs) of all conetworks were measured in water and in tetrahydrofuran (THF). The DSs of the APCNs in THF were higher than those in water, whereas the reverse was true for the DSs of the hydrophilic homopolymer networks. Finally, the aqueous DSs of the APCNs were lower than those of the corresponding hydrophilic homopolymer networks. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7556–7565, 2008     

Computer simulation of architectural and molecular weight effects on the assembly of amphiphilic linear-dendritic block copolymers in solution

Langevin dynamics simulations are performed on linear-dendritic diblock copolymers containing bead-spring, freely jointed chains composed of hydrophobic linear monomers and hydrophilic dendritic monomers. The critical micelle concentration (CMC), micelle size distribution, and shape are examined as a function of dendron generation and architecture. For diblock copolymers with a linear block of fixed length, it is found that the CMC increases with increasing dendron generation. This trend qualitatively agrees with experiments on linear-dendritic diblock and triblock copolymers with hydrophilic dendritic blocks and hydrophobic linear blocks. The flexibility of the dendritic block is altered by varying the number of spacer monomers between branch points in the dendron. When comparing linear-dendritic diblock copolymers with similar molecular weights, it is shown that increasing the number of spacer monomers in the dendron lowers the CMC due to an increase in flexibility of the dendritic block. Analysis on the micellar structure shows that linear-dendritic diblock copolymers pack more densely than what would be expected for a linear-linear diblock copolymer of the same molecular weight.     

γ-Rays-induced synthesis of hydrogels of vinyl ethers with stimuli-sensitive behavior

γ-Radiation method was applied to synthesize novel water-soluble and water-swelling polymers. Vinyl ether of ethylene glycol (VEEG), vinyl butyl (VBE) and vinyl isobutyl (VIBE) ethers were used as monomers. The synthesis of VEEG–VBE and VEEG–VIBE copolymers was carried out in a wide range of feed composition and absorbed dose. It was found that the hydrophobic–hydrophilic balance of the copolymers could be delicately varied by the copolymer composition as well as by the chemical structure of the alkyl substitute in the hydrophobic moiety. The copolymers exhibit thermo-sensitive behavior in water solutions. The value of transition temperature is considerably decreased at a higher concentration of the hydrophobic component in the copolymer composition.     

Participation of electrolyte cations in albumin adsorption onto negatively charged polymer latices

The participation of electrolyte cations in the adsorption of bovine serum albumin (BSA) onto polymer latices was investigated. The latices used were hydrophobic polystyrene (PS), and hydrophilic copolymers, i.e., styrene (St)/2-hydroxyethyl methacrylate(HEMA) copolymer [P(St/HEMA)] and styrene/acrylamide (AAm) copolymer [P(St/AAm)]. Three kinds of electrolyte cations (Na⁺, Ca²⁺, Mg²⁺) were used as the chloride. The amount of BSA adsorbed in every cation medium showed a maximum near the isoelectric point (iep, pH about 5) of the protein. The amounts of BSA adsorbed onto copolymer latices (except in the acidic pH region lower than the iep) were considerably smaller than that onto PS latex because of the steric repulsion and the decrease in the hydrophobic interaction between BSA and copolymer latices. In the acidic pH region, there was little difference in the amount of BSA adsorbed in every cation medium. However, in the pH region higher than the iep, the amounts of BSA adsorbed (particularly onto PS latex) in divalent cations (Ca²⁺ and Mg²⁺) media were relatively greater compared with that in a monovalent (Na⁺) one. This result was interpreted on the basis of the differences in such effects of electrolyte cations as dehydration power, suppression of the electrostatic repulsion, and binding affinity to BSA molecule. Ion Chromatographic estimation of the amounts of electrolyte cations captured upon BSA adsorption (in pH > 5) revealed that divalent cations were incorporated into the contact interface between the latex and BSA molecule so as to prevent the accumulation of anion charge and facilitate the protein adsorption.     

Hydrophobic Core/Hydrophilic Shell Amphiphilic Particles

Amphiphilic colloidal particles with hydrophobic cores and hydrophilic shells were prepared via a two-step method. First, polystyrene cores were obtained through the concentrated emulsion polymerization. A mixture of styrene, ethyl benzene, divinyl benzene, azobisisobutyronitrile, and cumene hydroperoxide (CHPO) was partially polymerized at 80 degrees C for 40 min and subsequently used as the dispersed phase of a concentrated emulsion in water. The concentrated emulsion was subjected to complete polymerization at 60 degrees C for 12 h; colloidal particles of crosslinked polystyrene were thus obtained. In the second step, the polystyrene particles were dispersed in water, after which acrylamide, N,N'-methylenebisacrylamide, and ferrous sulfate (FS) were added. The system was heated (typically at 30 degrees C) to conduct the polymerization of the hydrophilic monomers. The CHPO present on the surface of the polystyrene particles and the FS present in the aqueous phase (both together constitute a redox initiator) ensured that the initiation occurred mostly on the surface of the particles and that the hydrophilic polymer obtained formed a shell encapsulating the particles. Under proper conditions, a porous outer shell could be generated, making the hydrophobic core accessible to the outside medium. Copyright 2001 Academic Press.     

Preparation of poly(hydroxyethyl methacrylate) and poly(hydroxypropyl methacrylate) latices

Hydroxyethyl methacrylate and hydroxypropyl methacrylate (both having extremely high solubilities in water) were polymerized in aqueous medium to obtain the respective polymer latices with a solid content as high as 10 wt.-%. The initial state of the polymerization is in solution rather than in dispersion, and the polymer product is sparingly soluble in the aqueous phase. The polymerization was carefully controlled to avoid forming hydrogel by using an oil soluble initiator and a mixture of sodium dodecyl sulfate and poly(vinyl alcohol). Solubilities of both monomers and polymers in water were also investigated.     

仿细胞膜结构共聚物的合成及涂层性能

采用饥饿法将2-甲基丙烯酰氧乙基磷酰胆碱(MPC)分别与甲基丙烯酸十八烷基酯(SMA)、 甲基丙烯酸十二烷基酯(LMA)及甲基丙烯酸正丁酯(BMA)聚合, 通过改变投料比例和沉淀剂种类, 合成了一系列含磷酰胆碱基团的仿细胞膜结构的两亲性二元随机共聚物. ¹H NMR和元素分析结果表明, 合成的两亲性二元随机共聚物的组成与投料比相近. DSC结果表明, 聚合物具有较低的玻璃化转变温度. 表面张力及水的动态接触角(DCA)研究发现, 聚合物涂层表面具有明显的两亲性及表面结构易变性, 在空气中憎水基团在表面取向, 在水环境中亲水的磷酰胆碱基团则迁移取向到涂层表面形成仿细胞外层膜结构界面, 最终形成不溶于水的仿细胞膜结构涂层.     

Fouling and protein adsorption effect of low-temperature plasma treatment of membrane surfaces

Adsorption of proteins and the effect of the chemical nature of membrane surfaces on protein adsorption were investigated using¹⁴C-tagged albumin and several microporous membranes (polyvinilydene fluoride, PVDF; nylon; polypropylene, PP; and polycarbonate, PC). The membrane surfaces were modified by exposing them to low-temperature plasma of several different monomers (n-butane, oxygen, nitrogen alone or as mixtures) in a radiofrequency plasma reactor. Transients in the permeability of albumin solutions through the membranes and changes in flux of distilled water through the membranes before and after adsorption of albumin were used to investigate the role of protein adsorption on membrane fouling. The results show that the extent of adsorption of albumin on hydrophobic membranes was considerably more than that on hydrophilic membranes. The hydrophilic membranes were susceptible to electrostatic interactions and less prone to fouling. A pore-blocking model was successfully used to correlate the loss of water flux through pores of defined geometry     

Polystyrene particles with proton-ionisable groups: pH-dependent stability of latices with weakly acidic groups

 Results of colloid chemical characterisation and stability measurements on electrostatically stabilised latex dispersions made from emulsions of styrene and 4,4′-azobis-(4-cyanovaleric acid) are reported. The deviant stability of the hydrophobic polystyrene particles at low pH and low ionic strength is related to a proton “tunable” hydration layer surrounding weakly charged particles. The idea implies the formation of a polymer-supported surface phase that does not have any clear boundary, either towards the polymer moiety or in the direction of the bulk solution. The formation of the surface phase is controlled by Coulombic, hydrophobic and van der Waals interactions and by the contribution from the water structure at the hydrophobic and hydrophilic domain of the polymer particles. Negative charges on the hydrophobic surface badly interfere with the water structure at the hydrophobic moiety of the particle, whereas positive or uncharged surface groups do not damage the balance of free and clustered water molecules at the interface. Because the hydrophobic nature of the surface changes with the degree of dissociation of the surface charges, the degree of hydrophobicity of the carboxylic latices can be adjusted by changing the pH; therefore, it may be concluded that the hydrated and discharged carboxylic particle is apparently more hydrophobic relative to the ionised one. Thus, our concept can also explain differences in the hydrophobicity of colloidal polymer particles. Received: 12 June 1999/Accepted in revised form: 24 September 1999